From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark_Otto@fws.gov Subject: Re: [9fans] Monitors and VGADB To: 9fans@cse.psu.edu Date: Mon, 21 Aug 2000 12:26:30 -0400 Message-ID: MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Topicbox-Message-UUID: fe4b91c6-eac8-11e9-9e20-41e7f4b1d025 I have gotten replies to my post but nothing about making a VGADB monitor entry. The vertical frequency is not a typo. I'll let you know or post something if there is a change. Mark William Staniewicz @cse.psu.edu on 08/21/2000 05:37:07 AM Please respond to 9fans@cse.psu.edu Sent by: owner-9fans@cse.psu.edu To: 9fans@cse.psu.edu cc: Subject: Re: [9fans] Monitors and VGADB Mark, I just installed Plan9 on my pc yesterday. I have the same monitor as you do and used the vgadb entry for the Micron 17FGx. This is probably not the correct thing to keep running it but at least it got something up on the screen for me to work with. I looked at my user's manual for the Micron 700FGx and noticed a difference in one of the numbers you posted. I wasn't sure if it is a typo, but what I have is indicated below. BTW, if you got any replies to your posting I would be interested in how to modify my vgadb correctly too. /Bill wstanREMOVETHIS@planet.nl On Fri, Aug 18, 2000 at 04:14:15PM +0000, Mark C. Otto wrote: > I have a Micron 700FGx 17" monitor, and I was trying to work through the > second part of the vgadb(6) to see if vga(8) will recognize my monitor. > I found an entry in the database for a Micron 17FGx. I cannot figure > out how to go from the information in the monitor manual to VGADB entry, > Display 300x225mm of viewable area. > Dot pitch 0.26mm (gives only one and does not specify horizontal or > vertical) > Horizontal frequency 30.0-69.0kHz > Vertical frequency 50.0-160.0Hz <--- I have 50.0-120.0 > Video band width 86MHz > Maximum resolution 1280x1024@60Hz > Preset modes: