From mboxrd@z Thu Jan 1 00:00:00 1970 From: erik quanstrom Date: Wed, 29 May 2013 18:26:59 -0400 To: trebol55555@aol.com, 9fans@9fans.net Message-ID: In-Reply-To: <51a67f75.X1IvVgJeNvIjTgP2%trebol55555@aol.com> References: <51a67f75.X1IvVgJeNvIjTgP2%trebol55555@aol.com> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Subject: Re: [9fans] PBSR...EI Topicbox-Message-UUID: 5db6a970-ead8-11e9-9d60-3106f5b1d025 > > you can work around this (i admit it's a hack) by > > starting a new rio window, running "cat /dev/kmesg", > > then hiding the window. be sure to turn scroll on > > before hiding. > > Thanks for the help erik, but that didn't work. cat finishes > and the console output keeps filling the screen making impossible the > installation. i have tested this. but my instructions might have been faulty. i normally run this command on any terminal i log into (including the redundant set of scrolling :-( ): window -m -hide -scroll rc -c 'echo scroll>/dev/wctl; label kmesg; tail -f /dev/kprint&' if you have to type in the face of interrupts, you might need to cut that down to just the "tail -f /dev/kprint" > Can I boot the official Plan9 with your bootloader? yes. - erik