From mboxrd@z Thu Jan 1 00:00:00 1970 To: 9fans@9fans.net Date: Mon, 5 Oct 2009 09:31:19 +0000 From: Bob Message-ID: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable References: (erik, quanstrom), Subject: Re: [9fans] fdsik suicide while installing Topicbox-Message-UUID: 7e90ca8e-ead5-11e9-9d60-3106f5b1d025 On Oct 2, 12:12 pm, quans...@quanstro.net (erik quanstrom) wrote: > > sdc0 is reported as a Toshiba MK4026GAX, its a 40gb harddrive. I have > > tried it with out dma and with, no difference. I have tried manually > > running it > > and have had the same result. The number (1040) after fdisk changes, > > is that > > number of the command in rc? i.e. the 1040th command run, but the pc > > number > > stays the same. > > the number, e.g., 1040, is the pid of the fdisk process. > the pc unfortunately is not valid.  it is beyond the end > of the text segment. > >         ; acid /n/sources/plan9/386/bin/disk/fdisk >         /n/sources/plan9/386/bin/disk/fdisk:386 plan 9 executable >         [...] >         acid: end >         0x00016048 > > could you send the output of >         ; cat /dev/sdC0/ctl > you can get an rc prompt by typing !rc at the installer > prompt. > > - erik This is with DMA enabled inquiry TOSHIBA MK4026GAX config 0040 capabilities 2f00 dma 00550020 dmactl 00550020 rwm 16 rwmctl 16 geometry 78140160 512 16383 16 63 part data 0 78140160 thanks for the help