From: kokamoto@hera.eonet.ne.jp
To: 9fans@9fans.net
Subject: [9fans] install onto P5Q-Pro SATA drives
Date: Wed, 10 Mar 2010 22:18:56 +0900 [thread overview]
Message-ID: <dcecc80b195ac8d80ebe231d2a46f674@hera.eonet.ne.jp> (raw)
It`s possible to install the Plan 9 distribution onto Asus P5Q-Pro
motherboard with two SATA HDD drive and a SATA DVD-RAM/±R/±RWdrive with
4 GB memory.
The Plan 9 distribution CDROM assumes the CDROM is connected to D:
drive, which is the problem here. Then, connect the drives as
SATA1=SATA HDD in my case 500GB Hitachi SATA drive)
SATA2= SATA DVD-RAM/±R/±RW Sdrive
SATA3= SATA HDD in my case the same as SATA1.
First, install the Plan 9 system from the distribution CDROM using
IDE Compatible mode. You may see some proble, such as some of the venti
parameters are not properly set (mem, bcmem, icmem), so I recommend
you to install fossil only first, and then setup venti later.
In my case fossil.conf includes a line of
fsys main config /dev/sdC0/fossil
and venti.conf does two lines of
isect /dev/sdC0/isect
arenas /dev/sdD1/arenas0.
Next, you should change the above lines as
fsys main config /dev/sdE0/fossil
and
isect /dev/sdE0/isect
arenas /dev/sdE2/arenas0.
of couse you should change the relevant lines in you plan9.ini file.
Then, exit the Plan 9 system, and return to the BIOS setting mode.
Here, you should change disk configurations to use AHCI mode.
this will lead you to SATA mode setupped Plan 9 system.
Lastly, I'm not using bloom because it's not fit my system.
Kenji
next reply other threads:[~2010-03-10 13:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-10 13:18 kokamoto [this message]
2010-03-17 11:22 ` kokamoto
2010-03-17 12:31 ` erik quanstrom
2010-03-17 15:06 ` kokamoto
2010-03-17 15:43 ` erik quanstrom
2010-03-20 7:17 ` EBo
2010-03-18 12:59 ` kokamoto
2010-03-18 14:02 ` erik quanstrom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dcecc80b195ac8d80ebe231d2a46f674@hera.eonet.ne.jp \
--to=kokamoto@hera.eonet.ne.jp \
--cc=9fans@9fans.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).