Re: [9fans] Problems Booting Plan9 CD

[Eldanen <eldanen@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1183 bytes --]

Aha.  Yes.  I noticed that issue when I turned off one of the settings
dealing with my HDD, something dealing with the auto-detection settings for
my SATA HDD in my BIOS,  access mode (large, auto), extended IDE drive
(auto, none).  So, those three things.  And I was able to reproduce that
error.

On 11/2/07, Sander van Dijk <a.h.vandijk@gmail.com> wrote:
>
> Hi,
>
> The image from yesterday (Nov 1, 2007) panics when I boot it in qemu,
> maybe this is related to the topic starter's problem?
> I try to boot it with "qemu -cdrom plan9.iso -boot d", and it produces
> the following output:
>
> Booting from CD-Rom...
> PBS1...Plan 9 from Bell Labs
> ELCR: 0A00
> apm ax=f000 cx=f000 dx=f000 di=fff0 ebx=9e22 esi=-f0010
> dev A0 port 170 config 85C0 capabilities 0300 mwdma 0007 udma 203F
> found partition sdD0!cdboot; 49992+1440
> FLAGS=246 TRAP=0 ECODE=0 PC=8002ffe7
>   AX 00000000  BX 80044774  CX 00000000  DX 00000000
>   SI 00000200  DI 00000000  BP 80047da4
>   CS 0010 DS 0008  ES 0008  FS 0008  GS 0008
>   CR0 80000011 CR2 00000000 CR3 0000c000
> panic: exception/interrupt 0
>
> Press almost any key to reset..
>
> Greetings, Sander.
>

[-- Attachment #2: Type: text/html, Size: 1621 bytes --]