[9fans] soekris boards

[9fans] soekris boards

[Bruce Ellis]

anyone had any experience with these things?

http://www.soekris.com/

brucee

Re: [9fans] soekris boards

[Brantley Coile]

I've written a system that ran on the 4501 and still
have a few.  I've still got some and some 4801s.  I'm
going to try to put Plan 9 on them when I get a chance.
Seems like it would make a great secstore.  Maybe even
an auth server.

 Brantley

On Fri, 2004-09-17 at 20:25, Bruce Ellis wrote:
> anyone had any experience with these things?
> 
> http://www.soekris.com/
> 
> brucee

Re: [9fans] soekris boards

[Ronald G. Minnich]

On Sat, 18 Sep 2004, Bruce Ellis wrote:

> anyone had any experience with these things?

no, but ... bastards! soldered on BIOS part :-)

no good to me :-)

ron

Re: [9fans] soekris boards

[Ronald G. Minnich]

On Fri, 17 Sep 2004, Brantley Coile wrote:

> I've written a system that ran on the 4501 and still
> have a few.  I've still got some and some 4801s.  I'm
> going to try to put Plan 9 on them when I get a chance.
> Seems like it would make a great secstore.  Maybe even
> an auth server.

plan 9 does run fine on a geode, those look about the same as my geode 
cluster boards.

ron

Re: [9fans] soekris boards

[Jack Johnson]

On Sat, 18 Sep 2004 10:25:04 +1000, Bruce Ellis <brucee@chunder.com> wrote:
> anyone had any experience with these things?

It would be fun to throw a little PCI video card on there if possible,
but I like the little case.

It does seem perfect for a secstore, or maybe a VPN router (or IPv6 bridge).

-Jack

Re: [9fans] soekris boards

[Brantley Coile]

That's not a problem.  The firmware includes code to reburn the bios. 
It's not just like a PC bios--there are some debugging
stuff in there.  It also PXE boots.

On Sat, 2004-09-18 at 00:31, Ronald G. Minnich wrote:
> On Sat, 18 Sep 2004, Bruce Ellis wrote:
> 
> > anyone had any experience with these things?
> 
> no, but ... bastards! soldered on BIOS part :-)
> 
> no good to me :-)
> 
> ron

[9fans] Re: soekris boards

[Dave Eckhardt]

> anyone had any experience with these things?
>
> http://www.soekris.com/

I haven't personally but I know a bunch of people
who use them and are happy with them.

Dave Eckhardt

Re: [9fans] soekris boards

[Ronald G. Minnich]

On Sat, 18 Sep 2004, Brantley Coile wrote:

> That's not a problem.  The firmware includes code to reburn the bios. 

yeah, people are doing that now. You get a chunk of the flash part that is 
not eraseable. The problem is that chunk does a lot of "special" setup 
that in many cases is not what you want ... 

ron

Re: [9fans] soekris boards

[C H Forsyth]

[-- Attachment #1: Type: text/plain, Size: 654 bytes --]

i've used the 4501.
unlike some `embedded' PC implementations i've used, the BIOS works on serial port,
which was better for me.  the BIOS also seemed to work, which made a change.

it doesn't take much to get plan 9 or inferno running on them.
for plan 9, it looks as though i deleted cga.$O from a copy of mkfile--
possibly cga should be configured explicitly in /sys/src/9/pc config files not mkfile--
removed all the graphics devices from pcsoe (compared to pccpu),
added
	void screeninit(void){}
to the port section, and changed the device configuration.
then as usual something intervened and i didn't do as much with it as i intended.

[-- Attachment #2: Type: message/rfc822, Size: 2427 bytes --]

From: Bruce Ellis <brucee@chunder.com>
To: "9fans@cse.psu.edu" <9fans@cse.psu.edu>
Subject: [9fans] soekris boards
Date: Sat, 18 Sep 2004 10:25:04 +1000
Message-ID: <414B8060.2010601@chunder.com>

anyone had any experience with these things?

http://www.soekris.com/

brucee

[-- Attachment #3: pcsoe --]
[-- Type: text/plain, Size: 704 bytes --]

dev
	root
	cons
	arch
	pnp		pci
	env
	pipe
	proc
	mnt
	srv
	dup
	rtc
	ssl
	tls
	bridge		log
	sdp		thwack unthwack
	cap
	kprof

	ether		netif
	ip		arp chandial ip ipv6 ipaux iproute netlog nullmedium pktmedium ptclbsum386 inferno

	sd

	uart
	pccard
	i82365		cis	

link
	devpccard
	devi82365
	ether83815	pci
	etherwavelan	wavelan devi82365 cis
	ethermedium
	loopbackmedium
	netdevmedium

misc

	uarti8250

	sdata		pci sdscsi

ip
	il
	tcp
	udp
	ipifc
	icmp
	icmp6
	gre
	ipmux
	esp
	rudp

port
	int cpuserver = 1;
	void screeninit(void){}

boot cpu
	il
	tcp

bootdir
	bootpcsoe.out boot
	/386/bin/ip/ipconfig ipconfig
	/386/bin/auth/factotum