From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: Date: Thu, 27 Mar 2008 11:03:53 +0000 From: "Stefan Hajnoczi" To: "Fans of the OS Plan 9 from Bell Labs" <9fans@9fans.net> In-Reply-To: <599f06db0803270350v59ca9668mee1edeceede9c89f@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <47E762A8.4010002@x1024.net> <140e7ec30803260038o75dcc78qede12a5ad6c05b1e@mail.gmail.com> <13426df10803260821t39f27c93waf220cd5b4b3a1d9@mail.gmail.com> <6a3ae47e0803270214y6de363b2m691b4e5933f976cc@mail.gmail.com> <599f06db0803270350v59ca9668mee1edeceede9c89f@mail.gmail.com> Subject: Re: [9fans] Eeepc Topicbox-Message-UUID: 8386c1e4-ead3-11e9-9d60-3106f5b1d025 > Install a pbs on it and see if it gets loaded and run. I have been running PBS off the USB stick the whole time. It's the step from 9load to the kernel which isn't working. 9load isn't able to find plan9.ini or the kernel I tell it on the USB stick - it doesn't even seem to be able to see the USB stick at all. But your point stands: PBS is using the USB stick via the BIOS. There is hope. Stefan On Thu, Mar 27, 2008 at 10:50 AM, Gorka Guardiola wrote: > > > > Either the BIOS is not exposing the USB stick as a disk, or the 9load > > BIOS device code isn't searching correctly. I'm going to give it a > > r > > This is easy to see. Install a pbs on it and see if it gets loaded and run. > If it is not, the BIOS does not see it. Take a look at the configuration of the > BIOS and try to set USB as (better if it is the first) a boot device. > > > -- > - curiosity sKilled the cat > >