From mboxrd@z Thu Jan 1 00:00:00 1970 MIME-Version: 1.0 Date: Tue, 13 Oct 2009 13:31:41 -0400 Message-ID: From: Akshat Kumar To: Fans of the OS Plan 9 from Bell Labs <9fans@9fans.net> Content-Type: text/plain; charset=ISO-8859-1 Subject: [9fans] usb/print problem since last update Topicbox-Message-UUID: 858bc078-ead5-11e9-9d60-3106f5b1d025 Last time I played with printing, was quite a while before the last update to usb/print (apparently Sep. 25). And stuff worked back then. Here's the output now: cpu% usb/print usb/print: startdevs: opening #0 /dev/usb/ep7.0 usb/print: /dev/usb/ep7.0: config: d2h data too large to fit in uhci usb/print: no device found and what does the ctl see? cpu% cat /dev/usb/ep7.0/ctl enabled control rw speed full maxpkt 8 pollival 0 samplesz 0 hz 0 hub 4 port 1 idle 255 csp 0x00ccff csp 0x020107 csp 0x00d4ff vid 0x03f0 did 0x4f11 HP 'Officejet 5600 series' Using the backup, usb/_print from July 28, stuff still works (there's a usable /dev/lp^$n device for printing and no error). Best, ak