From mboxrd@z Thu Jan  1 00:00:00 1970
Mime-Version: 1.0
Message-Id: <p04310500b80070780dd5@[192.168.1.31]>
To: 9fans@cse.psu.edu
From: Moroo Jun <moroo@nifty.com>
Content-Type: text/plain; charset="us-ascii"
Subject: [9fans] Ethernet does not start up.
Date: Sat, 27 Oct 2001 23:35:48 +0900
Topicbox-Message-UUID: 0f3eeec8-eaca-11e9-9e20-41e7f4b1d025

I'm Plan9 newbee.

I'm trying to install Plan9 on my note pc. But I have troubles.

My note pc can't use Etherlink III except for just power on.
Unfortunately, it can't start rio after rebooting from Windows95.

I used Etherlink III on PCMCIA Slot "1" because Slot 0 connector was broken.
What should I do?

1. After Power on: (Ether is OK, vga is NG)
....
apm ax=f000 cx=f000 dx=40 di=ffff ebx=b66f esi=-1
dev A0 port 1F0 config 0040 capabilities 0F00 mwdma 0407 udma 0007
dev A0 port 170 config 85C0 capabilities 0B00 mwdma 0203
using sdC0!dos!plan9/plan9.ini
#y0: 2 slot Intel 82365SL: port 0x3E0 irq 5
#l0: xcvr10BaseT 3C589
ether#0: 3c589: port 0x110 irq 11: 0060088B00C8
found 9PCDISK .    attr 0x0 start 0x4d len 1441737
....

2. reboot (After using windows95): (Ether is NG, vga is OK)
....
apm ax=f000 cx=f000 dx=40 di=ffff ebx=b66f esi=-1
dev A0 port 1F0 config 0040 capabilities 0F00 mwdma 0407 udma 0007
dev A0 port 170 config 85C0 capabilities 0B00 mwdma 0203
using sdC0!dos!plan9/plan9.ini
#y0: 2 slot Intel 82365SL: port 0x3E0 irq 5
found 9PCDISK .    attr 0x0 start 0x4d len 1441737
....

my plan9.ini is
*nomp=1
distname=plan9
monitor=lcd
vgasize=800x600x8
mouseport=ps2
bootargs=local!#S/sdC0/fs
bootfile=sdC0!9fat!9pcdisk
ether0=type=3c589 port=0x110 irq=11

Best regards,

-- 
Moroo Jun