Re: [9front] Re: drawterm stuck

[Amavect <amavect@gmail.com>]

> oh my net audit show everything seems to be fine except
> ether=3D525400123456 does not belong to any network interface
> no fs=3D entry  (needed for pls boot)=20
Refer to my example from my last message and modify to your own setup.
You have duplicate sys=cirno lines, the cpu= line is not a '=', and your 
dom should be 9front, not cirno.9front.
Your ipgw and dns is your router's ip address, which is probably 10.0.2.1
No fs is fine if you're not planning to need tls boot.

> auth server seems to be fine i think it reads
> someone is listening on port 567
That's good. The cpu server is trying to listen for connections.
Clearly not succeeding, though.

> auth/asaudit shows 1 problem
> 
> BAD: key in keyfs does not match nvram
> trying nvram key for 9front@glenda with factotum
> GOOD: key in factotum matches nvram
I'm guessing you didn't set up glenda's password with auth/changeuser
Or, if you did, the key didn't match. Run auth/wrkey again.
Refer to the fqa links that I had put in my last message.

Thanks,
Amavect