Re: [9front] Wifi setup in plan9.ini fails to work, need to run commands by hand

[Chris Gorman <chrisjohgorman@gmail.com>]

Hi Kemal,

I just tried it and the network card fails to initialize.  I can copy
/dev/kmesg again if it might help, but the messages appear to be the
same as before.  My guess is that it's related to ...

#l1: status 0cac8a04ffd5: 000000002580 000000000010: connecting ->
need authentication (from pc=0xffffffff801be679)

Even though I've supplied authentication via wpapsk=PASS.  Perhaps my
networking setup is broken somewhere?

As a long shot, could it be because of my /lib/ndb/local?  My
modifications to it are...

auth=ada authdom=cgnet
ipnet=cgnet ip=192.168.2.0 ipmask=255.255.255.0
    ipgw=192.168.2.1
    dns=192.168.2.1
    auth=ada
    dnsdom=cgnet
    fs=ada

sys=ada ether=989096aad5d5

I have no entry for the wifi mac in /lib/ndb/local, could this be the problem?

Thanks for the suggestion,

Best,

Chris

On Fri, Nov 25, 2022 at 2:41 PM kemal <kemalinanc8@gmail.com> wrote:
>
> hi, may you try this in plan9.ini?
>
> ether1=type=iwl essid=ESSID
> wpapsk=PASS