9front - general discussion about 9front
 help / color / mirror / Atom feed
From: Eli Cohen <echoline@gmail.com>
To: 9front@9front.org
Subject: Re: [9front] new nusb/serial driver
Date: Thu, 11 Jun 2020 00:36:43 -0700	[thread overview]
Message-ID: <CAHwi9bw=cQbr5yQffBZCPULtuCJKbGZGdyaAG_BA+EEamsp=3Q@mail.gmail.com> (raw)
In-Reply-To: <C9D2B976100027D110A27353EAE4E696@musolino.id.au>

[-- Attachment #1: Type: text/plain, Size: 184 bytes --]

I'm sending it again just in case

On Thu, Jun 11, 2020 at 12:30 AM Alex Musolino <alex@musolino.id.au> wrote:
>
> > I just attached the file to my email
>
> Did you?  I don't see it.

[-- Attachment #2: cdc.c --]
[-- Type: text/x-csrc, Size: 2398 bytes --]

#include <u.h>
#include <libc.h>
#include <thread.h>
#include <fcall.h>
#include <9p.h>
#include "usb.h"
#include "serial.h"

enum {
	ScACM = 2,
	AT	= 1,
};

static int
cdcsetparam(Serialport *p)
{
	int res;
	uchar vals[7];
	Serial *ser;

	ser = p->s;

	PUT4(vals, p->baud);

	vals[4] = 0;
	if(p->stop == 1)
		vals[4] = 0;
	if(p->stop == 15)
		vals[4] = 1;
	if(p->stop == 2)
		vals[4] = 2;

	vals[5] = p->parity;

	vals[6] = p->bits;

	res = usbcmd(ser->dev, Rh2d | Rclass | Riface, 0x20, 0, 0, vals, 7);

	return res;
}

static int
cdcinit(Serialport *p)
{
	Serial *ser;

	p->baud = 115200;
	p->bits = 8;
	p->parity = 0;
	p->stop = 1;

	ser = p->s;

	cdcsetparam(p);
	incref(ser->dev);
	return 0;
}

static int
cdcsetbreak(Serialport *p, int val)
{
	Serial *ser;

	ser = p->s;
	return usbcmd(ser->dev, Rh2d | Rclass | Riface, 0x23, (val != 0? 0xffff: 0x0000), 0, nil, 0);
}

static int
cdcseteps(Serialport *p)
{
	devctl(p->epin, "maxpkt 256");
	devctl(p->epout, "maxpkt 256");
	return 0;
}

static int
cdcsendlines(Serialport *p)
{
	if(p->rts)
		p->ctlstate |= 0x0002;
	else
		p->ctlstate &= ~0x0002;
	if(p->dtr)
		p->ctlstate |= 0x0001;
	else
		p->ctlstate &= ~0x0001;

	return usbcmd(p->s->dev, Rh2d | Rclass | Riface, 0x22, p->ctlstate, 0, nil, 0);
}

static int
cdcclearpipes(Serialport *p)
{
	Serial *ser;

	ser = p->s;

	if(unstall(ser->dev, p->epout, Eout) < 0)
		dprint(2, "disk: unstall epout: %r\n");
	if(unstall(ser->dev, p->epin, Ein) < 0)
		dprint(2, "disk: unstall epin: %r\n");
	if(unstall(ser->dev, p->epintr, Ein) < 0)
		dprint(2, "disk: unstall epintr: %r\n");

	return 0;
}

static int
cdcwait4data(Serialport *p, uchar *data, int count)
{
	int n;

	qunlock(p->s);
	while ((n = read(p->epin->dfd, data, count)) == 0)
		;
	qlock(p->s);

	return n;
}

static Serialops cdcops = {
	.init		= cdcinit,
	.setparam	= cdcsetparam,
	.setbreak	= cdcsetbreak,
	.seteps		= cdcseteps,
	.sendlines	= cdcsendlines,
	.clearpipes	= cdcclearpipes,
	.wait4data	= cdcwait4data,
};

int
cdcprobe(Serial *ser)
{
	int i, c;
	ulong csp;
	Usbdev *ud = ser->dev->usb;
	Ep *ep;

	c = 0;
	for (i = 0; i < nelem(ud->ep); i++) {
		if ((ep = ud->ep[i]) == nil)
			continue;
		csp = ep->iface->csp;
		if (Class(csp) == Clcomms && Subclass(csp) == ScACM && Proto(csp) == AT)
			c++;
	}

	if (c == 0)
		return -1;

	ser->nifcs = 1;
	ser->outhdrsz = 0;
	ser->hasepintr = 1;
	ser->Serialops = cdcops;
	return 0;
}

  reply	other threads:[~2020-06-11  7:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-11  7:03 Eli Cohen
2020-06-11  7:17 ` [9front] " Alex Musolino
2020-06-11  7:19   ` Eli Cohen
2020-06-11  7:29     ` Alex Musolino
2020-06-11  7:36       ` Eli Cohen [this message]
2020-06-11  7:57         ` Eli Cohen
2020-06-11 12:15           ` cinap_lenrek
2020-06-11 14:08             ` Eli Cohen
2020-06-11 17:10               ` cinap_lenrek
2020-06-12  1:28                 ` Eli Cohen
2020-06-12 18:02                 ` cinap_lenrek
2020-06-12 22:15                   ` Eli Cohen
2020-06-13 14:03                     ` cinap_lenrek
2020-06-13 14:18                       ` Eli Cohen
2020-06-13 15:37                         ` cinap_lenrek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHwi9bw=cQbr5yQffBZCPULtuCJKbGZGdyaAG_BA+EEamsp=3Q@mail.gmail.com' \
    --to=echoline@gmail.com \
    --cc=9front@9front.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).