* ocamlmake problem
@ 2005-09-27 2:03 Pietro Abate
2005-09-28 1:03 ` [Caml-list] " Pietro Abate
0 siblings, 1 reply; 2+ messages in thread
From: Pietro Abate @ 2005-09-27 2:03 UTC (permalink / raw)
To: ocaml ml
[-- Attachment #1: Type: text/plain, Size: 651 bytes --]
Hi all,
I'm trying to use ocmalmake + camlp4 to re-use the same
code with dynlink in byte-code or without dynlink in native
code. Do to this I'm using pa_macro to remove dynlink part of
the code. Now I'm trying to glue everything together with ocamlmake.
Attached there is a small example. Basically the problem is that if
I use the SUBPROJS pragma, the PRE_TARGETS are ignored. How can I
do this ?
:)
p
--
++ Blog: http://blog.rsise.anu.edu.au/?q=pietro
++
++ "All great truths begin as blasphemies." -George Bernard Shaw
++ Please avoid sending me Word or PowerPoint attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html
[-- Attachment #2: c4ex.ml --]
[-- Type: text/plain, Size: 69 bytes --]
(*pp camlp4o pa_macro.cmo *)
IFNDEF NATIVE THEN open Dynlink ENDIF
[-- Attachment #3: ex1.ml --]
[-- Type: text/plain, Size: 24 bytes --]
print_endline "ex1!!!"
[-- Attachment #4: ex2.ml --]
[-- Type: text/plain, Size: 24 bytes --]
print_endline "ex2!!!"
[-- Attachment #5: Makefile --]
[-- Type: text/plain, Size: 804 bytes --]
# Set OCamlMakefile to use
export OCAMLMAKEFILE = /usr/share/ocaml-tools/OCamlMakefile
# Define project "ex1"
# this project should be compiled in bc
define PROJ_ex1
USE_CAMLP4 := yes
PRE_TARGETS := c4ex.cmi c4ex.cmo
SOURCES = ex1.ml
RESULT = ex1
PACKS := dynlink unix
endef
export PROJ_ex1
# Define project "ex2"
# this subprojet should use NATIVE and remove
# dynlink functions
define PROJ_ex2
USE_CAMLP4 := yes
PRE_TARGETS := c4ex.cmi c4ex.cmo
SOURCES = ex2.ml
RESULT = ex2
PACKS := unix
PPFLAGS := -DNATIVE
endef
export PROJ_ex2
# by default I want to compile the bc
ifndef SUBPROJS
export SUBPROJS = ex1
endif
# Default target to use
all: bc
# Catch-all target will be applied to all subprojects automatically
%:
@$(MAKE) -f $(OCAMLMAKEFILE) subprojs SUBTARGET=$@
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Caml-list] ocamlmake problem
2005-09-27 2:03 ocamlmake problem Pietro Abate
@ 2005-09-28 1:03 ` Pietro Abate
0 siblings, 0 replies; 2+ messages in thread
From: Pietro Abate @ 2005-09-28 1:03 UTC (permalink / raw)
To: ocaml ml
[-- Attachment #1: Type: text/plain, Size: 2473 bytes --]
I know, I know... tried harder, try in the morning...
attached the answer to my question... I suppose there is a
better way of doing it...
:)
pp
On Tue, Sep 27, 2005 at 12:03:08PM +1000, Pietro Abate wrote:
> Hi all,
> I'm trying to use ocmalmake + camlp4 to re-use the same
> code with dynlink in byte-code or without dynlink in native
> code. Do to this I'm using pa_macro to remove dynlink part of
> the code. Now I'm trying to glue everything together with ocamlmake.
>
> Attached there is a small example. Basically the problem is that if
> I use the SUBPROJS pragma, the PRE_TARGETS are ignored. How can I
> do this ?
>
> :)
> p
>
> --
> ++ Blog: http://blog.rsise.anu.edu.au/?q=pietro
> ++
> ++ "All great truths begin as blasphemies." -George Bernard Shaw
> ++ Please avoid sending me Word or PowerPoint attachments.
> See http://www.fsf.org/philosophy/no-word-attachments.html
> (*pp camlp4o pa_macro.cmo *)
>
> IFNDEF NATIVE THEN open Dynlink ENDIF
>
>
> print_endline "ex1!!!"
>
> print_endline "ex2!!!"
> # Set OCamlMakefile to use
> export OCAMLMAKEFILE = /usr/share/ocaml-tools/OCamlMakefile
>
> # Define project "ex1"
> # this project should be compiled in bc
> define PROJ_ex1
> USE_CAMLP4 := yes
> PRE_TARGETS := c4ex.cmi c4ex.cmo
>
> SOURCES = ex1.ml
> RESULT = ex1
> PACKS := dynlink unix
> endef
> export PROJ_ex1
>
> # Define project "ex2"
> # this subprojet should use NATIVE and remove
> # dynlink functions
> define PROJ_ex2
> USE_CAMLP4 := yes
> PRE_TARGETS := c4ex.cmi c4ex.cmo
>
> SOURCES = ex2.ml
> RESULT = ex2
> PACKS := unix
> PPFLAGS := -DNATIVE
> endef
> export PROJ_ex2
>
> # by default I want to compile the bc
> ifndef SUBPROJS
> export SUBPROJS = ex1
> endif
>
> # Default target to use
> all: bc
>
> # Catch-all target will be applied to all subprojects automatically
> %:
> @$(MAKE) -f $(OCAMLMAKEFILE) subprojs SUBTARGET=$@
> _______________________________________________
> Caml-list mailing list. Subscription management:
> http://yquem.inria.fr/cgi-bin/mailman/listinfo/caml-list
> Archives: http://caml.inria.fr
> Beginner's list: http://groups.yahoo.com/group/ocaml_beginners
> Bug reports: http://caml.inria.fr/bin/caml-bugs
--
++ Blog: http://blog.rsise.anu.edu.au/?q=pietro
++
++ "All great truths begin as blasphemies." -George Bernard Shaw
++ Please avoid sending me Word or PowerPoint attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html
[-- Attachment #2: Makefile --]
[-- Type: text/plain, Size: 956 bytes --]
# Set OCamlMakefile to use
export OCAMLMAKEFILE = /usr/share/ocaml-tools/OCamlMakefile
# Define project "ex1"
# this project should be compiled in bc
define PROJ_ex1
USE_CAMLP4 = yes
SOURCES = ex1.ml c4ex.ml
RESULT = ex1
export PACKS = dynlink unix
endef
export PROJ_ex1
# Define project "ex2"
# this subprojet should use NATIVE and remove
# dynlink functions
define PROJ_ex2
USE_CAMLP4 = yes
PPFLAGS = -DNATIVE
SOURCES = ex2.ml c4ex.ml
RESULT = ex2
export PACKS = unix
endef
export PROJ_ex2
#ifndef SUBPROJS
#export SUBPROJS = ex2 clean ex1
#endif
# Default target to use
#all: bc
ex1:
@$(MAKE) -f $(OCAMLMAKEFILE) subprojs SUBTARGET=bc SUBPROJS=ex1
ex2:
@$(MAKE) -f $(OCAMLMAKEFILE) subprojs SUBTARGET=nc SUBPROJS=ex2
clean:
@$(MAKE) -f $(OCAMLMAKEFILE) subprojs SUBTARGET=clean SUBPROJS="ex1 ex2"
# Catch-all target will be applied to all subprojects automatically
#%:
# @$(MAKE) -f $(OCAMLMAKEFILE) subprojs SUBTARGET=$@
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-09-28 1:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-09-27 2:03 ocamlmake problem Pietro Abate
2005-09-28 1:03 ` [Caml-list] " Pietro Abate
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).