Offtopic: Forwarding in MS Outlook

Offtopic: Forwarding in MS Outlook

[Roman Belenov]

Sorry for such offtopic, but 1) the reason of my question is quite
related to NT Emacs/Gnus 2) I don't know where to find info on MS
Outlook.

Is there any way to customize forwarding in MS Outlook so that it
forwards all headers of the original message ?

Actually I'm trying to make Gnus/Emacs work with MS Exchange server
(if anybody knows better solution, please inform me - but read below
for some details). Because of some changes in a company I'm working
for in a few weeks I won't be able to use POP3 server I'm using now
and POP3 will NOT be installed on MS Exchange server too (it's a
company policy, not an administrator decision).

The solution I'm trying to implement now is to make MS Outlook a
gateway between Gnus/Emacs and Exchange. Since MS Exchange
provides SMTP service (it seems that it won't be turned off), the
problem is with fetching incoming mail. So I wrote simple MTA that
simply saves incoming messages in the certain directory (it's enough
for Gnus) and made Outlook forward messages I'm interested in to that
MTA. The only problem is that MS Outlook strips almost all headers from the
message, so it's impossible to sort them and so on. Is there any way
to make Outlook forward messages verbatim ? Although even this
crippled solution may work (well, it's possible to sort messages
inside Outlook sending them to different addresses and then make
necessary fields in MTA based on recipient address) I hope it can be
enhanced.

-- 
 							With regards, Roman.

Re: Offtopic: Forwarding in MS Outlook

[Kai Großjohann]

Do you think you could get the Exchange admins to provide IMAP access?
kai
-- 
Beware of flying birch trees.

Re: Offtopic: Forwarding in MS Outlook

[Roman Belenov]

Kai.Grossjohann@CS.Uni-Dortmund.DE (Kai Großjohann) writes:

> Do you think you could get the Exchange admins to provide IMAP
> access?

Definitely no. And, as I wrote, it is not a matter of talking with
admins, it's a company policy.

-- 
 							With regards, Roman.

Re: Offtopic: Forwarding in MS Outlook

[Bjørn Mork]

Roman Belenov <roman@nstl.nnov.ru> writes:

> Kai.Grossjohann@CS.Uni-Dortmund.DE (Kai Großjohann) writes:
> 
> > Do you think you could get the Exchange admins to provide IMAP
> > access?
> 
> Definitely no. And, as I wrote, it is not a matter of talking with
> admins, it's a company policy.

Too bad. Gnus nnimap is working fine as an Exchange client.

The only way I have found to make Outlook/Exchange preserve the headers
is to forward mails as message/rfc822 attachments. My Outlook is in
Norwegian so I can't tell you exactly which menu and option to change.. 
Find the email settings, look for the forwarding options and choose
"as attachment" or something like that.

Your MTA will then have to save the attachment and drop the rest.


Bjørn

Re: Offtopic: Forwarding in MS Outlook

[Andrew Innes]

On 28 Apr 2000 11:58:35 +0400, Roman Belenov <roman@nstl.nnov.ru> said:
>Sorry for such offtopic, but 1) the reason of my question is quite
>related to NT Emacs/Gnus 2) I don't know where to find info on MS
>Outlook.
>
>Is there any way to customize forwarding in MS Outlook so that it
>forwards all headers of the original message ?
>
>Actually I'm trying to make Gnus/Emacs work with MS Exchange server
>(if anybody knows better solution, please inform me - but read below
>for some details). Because of some changes in a company I'm working
>for in a few weeks I won't be able to use POP3 server I'm using now
>and POP3 will NOT be installed on MS Exchange server too (it's a
>company policy, not an administrator decision).
>
>The solution I'm trying to implement now is to make MS Outlook a
>gateway between Gnus/Emacs and Exchange. Since MS Exchange
>provides SMTP service (it seems that it won't be turned off), the
>problem is with fetching incoming mail. So I wrote simple MTA that
>simply saves incoming messages in the certain directory (it's enough
>for Gnus) and made Outlook forward messages I'm interested in to that
>MTA. The only problem is that MS Outlook strips almost all headers from the
>message, so it's impossible to sort them and so on. Is there any way
>to make Outlook forward messages verbatim ? Although even this
>crippled solution may work (well, it's possible to sort messages
>inside Outlook sending them to different addresses and then make
>necessary fields in MTA based on recipient address) I hope it can be
>enhanced.

Hi Roman,

A better solution would be to write a variant of movemail.exe that uses
MAPI to get mail directly from the Exchange server.  When I first
started at my current job last summer, I thought I would have to do
this, but then found out the POP3 service was actually installed and it
was a DNS problem stopping me from seeing it.  So I never got as far as
writing this program, although a month before that there was some
discussion about it.  The mail is archived here:

  http://www.egroups.com/messagesearch/ntemacs-users?query=mapi

But if you are willing to work on it (necessity and all that), then I
can offer some help.  Even though I have POP access to Exchange, I would
actually prefer to have direct MAPI access, because the POP service
seems to take it upon itself to reformat messages, wrapping long lines
and omitting some "inline" attachments, and generally doing things that
irritate me.

We could also provide the sending part of the MAPI solution, and make
the whole thing part of Emacs proper, if you are willing to assign
copyright to the FSF (and get a disclaimer from your employer if
relevant).

AndrewI

Re: Offtopic: Forwarding in MS Outlook

[WJCarpenter]

ai> We could also provide the sending part of the MAPI solution, and
ai> make the whole thing part of Emacs proper, if you are willing to
ai> assign copyright to the FSF (and get a disclaimer from your
ai> employer if relevant).

Even without asking for an expression of interest, I can say that it
would be worthwhile to add goop to feedmail.el to handle a MAPI case
if some combination of people get around to doing the stuff that
AndrewI outlined.

So, if someone does all that and writes a patch to feedmail.el, I'd
sure like to see it.  If someone does all the rest and I can figure it
out, I'll add the MAPI buffer-eater thing to feedmail.el myself.
(It's almost always really, really easy to write a buffer-eater for
feedmail if it's just mostly handing a message and an address list to
a separate executable.)

(I can offer no help with the actual MAPI part myself, as I spent too
many years yelling at people for thinking it was good.  Now it would
take surgical alteration or something for me to study up on it enough
to write an actual interface.)
-- 
bill@carpenter.ORG (WJCarpenter)    PGP 0x91865119
38 95 1B 69 C9 C6 3D 25    73 46 32 04 69 D6 ED F3

Re: Offtopic: Forwarding in MS Outlook

[Karel Sprenger]

Hi,

No help from my part (wouldn't know where to start), but I would *love* to
have MAPI access from within emacs.  Since I moved to Compaq last October I
have been obliged to work with Outlook and that is definitely *not* Gnus to
say the least.

... Time passes ...

I just remembered I saw a Perl5 Win32 package that interfaced with MAPI.
Looking through my Netscape bookmarks, I rediscovered a link to a site dealing
with Perl & Mail (http://alma.ch/perl/mail.htm), which led me to
http://www.geocities.com/SiliconValley/Park/8312/mail.htm which has a link
labeld as "Microsoft mail command line program (needs mapi32.dll)" to a
self-extracting archive ftp://ftp.microsoft.com/softlib/mslfiles/smplmapi.EXE,
that contains not only the program, but also the source code and a readme file
explaining things.

Guess that would make a good start.  Hope one of you can turn this into a MAPI
interface for emacs.  I offer a couple of free beers if you get in Amsterdam.

Cheers,
Karel

-- 
Karel Sprenger <karel.sprenger@compaq.com>  | phone : +31-30-283 4842
Professional Services                       | mobile: +31-6-5178 5034
Compaq Computer Corporation                 | fax   : +31-30-283 4980
Europalaan 44, NL-3526 KS Utrecht           | home  : +31-20-670 0942
*** PGP Public Key available on servers *** | email : cjas@xs4all.nl 

MAPI backend (was: Offtopic: Forwarding in MS Outlook)

[Roman Belenov]

[-- Attachment #1: Type: text/plain, Size: 965 bytes --]

If anybody is interested in writing MAPI-based mail fetcher, here is a
program I made for personal usage from PMSEU utility
(http://www.genusa.com/utils/pmseu.htm). It is written in Visual Basic
(it was first time I've done something with this dialect - never used
Basic since my schooldays :-). All parameters are hardwired; some
command line/config file parsing should make this utility quite usable.

The original program seems to be in public domain (although I'm not a
lawyer); I don't claim any rights on my code too. Anyway IMHO it
should be rewritten in C++ (should not be too hard since COM
interfaces are almost the same) and given proper interface (like
GNUish command-line parsing), so it can be made decent part of Emacs;
I don't sure I'll do it myself (the "get a disclaimer from your
employer if relevant" part seems to be the hardest - there were no
precedents in the company I'm working for and it seems that procedure
will be quite complicated).


[-- Attachment #2: Type: text/plain, Size: 1249 bytes --]



Andrew Innes <andrewi@gnu.org> writes:

> A better solution would be to write a variant of movemail.exe that uses
> MAPI to get mail directly from the Exchange server.  When I first
> started at my current job last summer, I thought I would have to do
> this, but then found out the POP3 service was actually installed and it
> was a DNS problem stopping me from seeing it.  So I never got as far as
> writing this program, although a month before that there was some
> discussion about it.  The mail is archived here:
> 
>   http://www.egroups.com/messagesearch/ntemacs-users?query=mapi
> 
> But if you are willing to work on it (necessity and all that), then I
> can offer some help.  Even though I have POP access to Exchange, I would
> actually prefer to have direct MAPI access, because the POP service
> seems to take it upon itself to reformat messages, wrapping long lines
> and omitting some "inline" attachments, and generally doing things that
> irritate me.
> 
> We could also provide the sending part of the MAPI solution, and make
> the whole thing part of Emacs proper, if you are willing to assign
> copyright to the FSF (and get a disclaimer from your employer if
> relevant).
> 
> AndrewI
> 
> 

-- 
 							With regards, Roman.

Re: Offtopic: Forwarding in MS Outlook

[Chris McMahan]

I may not understand your problem completely, but why wouldn't using
the IMAP features of gnus work for you. Exchange supports IMAP as well
as POP3.

Chris McMahan

Roman Belenov writes:
 > Sorry for such offtopic, but 1) the reason of my question is quite
 > related to NT Emacs/Gnus 2) I don't know where to find info on MS
 > Outlook.
 > 
 > Is there any way to customize forwarding in MS Outlook so that it
 > forwards all headers of the original message ?
 > 
 > Actually I'm trying to make Gnus/Emacs work with MS Exchange server
 > (if anybody knows better solution, please inform me - but read below
 > for some details). Because of some changes in a company I'm working
 > for in a few weeks I won't be able to use POP3 server I'm using now
 > and POP3 will NOT be installed on MS Exchange server too (it's a
 > company policy, not an administrator decision).
 > 
 > The solution I'm trying to implement now is to make MS Outlook a
 > gateway between Gnus/Emacs and Exchange. Since MS Exchange
 > provides SMTP service (it seems that it won't be turned off), the
 > problem is with fetching incoming mail. So I wrote simple MTA that
 > simply saves incoming messages in the certain directory (it's enough
 > for Gnus) and made Outlook forward messages I'm interested in to that
 > MTA. The only problem is that MS Outlook strips almost all headers from the
 > message, so it's impossible to sort them and so on. Is there any way
 > to make Outlook forward messages verbatim ? Although even this
 > crippled solution may work (well, it's possible to sort messages
 > inside Outlook sending them to different addresses and then make
 > necessary fields in MTA based on recipient address) I hope it can be
 > enhanced.
 > 
 > -- 
 >  							With regards, Roman.
 > 
 > 

-- 
 ______
  '||'  Chris McMahan
   ..   cmcmahan@one.net

Re: Offtopic: Forwarding in MS Outlook

[cartero]

Do you think you could get the Exchange admins to provide IMAP access?
kai
-- 
Beware of flying birch trees.

Re: Offtopic: Forwarding in MS Outlook

[cartero]

On 28 Apr 2000 11:58:35 +0400, Roman Belenov <roman@nstl.nnov.ru> said:
>Sorry for such offtopic, but 1) the reason of my question is quite
>related to NT Emacs/Gnus 2) I don't know where to find info on MS
>Outlook.
>
>Is there any way to customize forwarding in MS Outlook so that it
>forwards all headers of the original message ?
>
>Actually I'm trying to make Gnus/Emacs work with MS Exchange server
>(if anybody knows better solution, please inform me - but read below
>for some details). Because of some changes in a company I'm working
>for in a few weeks I won't be able to use POP3 server I'm using now
>and POP3 will NOT be installed on MS Exchange server too (it's a
>company policy, not an administrator decision).
>
>The solution I'm trying to implement now is to make MS Outlook a
>gateway between Gnus/Emacs and Exchange. Since MS Exchange
>provides SMTP service (it seems that it won't be turned off), the
>problem is with fetching incoming mail. So I wrote simple MTA that
>simply saves incoming messages in the certain directory (it's enough
>for Gnus) and made Outlook forward messages I'm interested in to that
>MTA. The only problem is that MS Outlook strips almost all headers from the
>message, so it's impossible to sort them and so on. Is there any way
>to make Outlook forward messages verbatim ? Although even this
>crippled solution may work (well, it's possible to sort messages
>inside Outlook sending them to different addresses and then make
>necessary fields in MTA based on recipient address) I hope it can be
>enhanced.

Hi Roman,

A better solution would be to write a variant of movemail.exe that uses
MAPI to get mail directly from the Exchange server.  When I first
started at my current job last summer, I thought I would have to do
this, but then found out the POP3 service was actually installed and it
was a DNS problem stopping me from seeing it.  So I never got as far as
writing this program, although a month before that there was some
discussion about it.  The mail is archived here:

  http://www.egroups.com/messagesearch/ntemacs-users?query=mapi

But if you are willing to work on it (necessity and all that), then I
can offer some help.  Even though I have POP access to Exchange, I would
actually prefer to have direct MAPI access, because the POP service
seems to take it upon itself to reformat messages, wrapping long lines
and omitting some "inline" attachments, and generally doing things that
irritate me.

We could also provide the sending part of the MAPI solution, and make
the whole thing part of Emacs proper, if you are willing to assign
copyright to the FSF (and get a disclaimer from your employer if
relevant).

AndrewI

Offtopic: Forwarding in MS Outlook

[cartero]

Sorry for such offtopic, but 1) the reason of my question is quite
related to NT Emacs/Gnus 2) I don't know where to find info on MS
Outlook.

Is there any way to customize forwarding in MS Outlook so that it
forwards all headers of the original message ?

Actually I'm trying to make Gnus/Emacs work with MS Exchange server
(if anybody knows better solution, please inform me - but read below
for some details). Because of some changes in a company I'm working
for in a few weeks I won't be able to use POP3 server I'm using now
and POP3 will NOT be installed on MS Exchange server too (it's a
company policy, not an administrator decision).

The solution I'm trying to implement now is to make MS Outlook a
gateway between Gnus/Emacs and Exchange. Since MS Exchange
provides SMTP service (it seems that it won't be turned off), the
problem is with fetching incoming mail. So I wrote simple MTA that
simply saves incoming messages in the certain directory (it's enough
for Gnus) and made Outlook forward messages I'm interested in to that
MTA. The only problem is that MS Outlook strips almost all headers from the
message, so it's impossible to sort them and so on. Is there any way
to make Outlook forward messages verbatim ? Although even this
crippled solution may work (well, it's possible to sort messages
inside Outlook sending them to different addresses and then make
necessary fields in MTA based on recipient address) I hope it can be
enhanced.

-- 
 							With regards, Roman.

Offtopic: Forwarding in MS Outlook

[cartero]

Sorry for such offtopic, but 1) the reason of my question is quite
related to NT Emacs/Gnus 2) I don't know where to find info on MS
Outlook.

Is there any way to customize forwarding in MS Outlook so that it
forwards all headers of the original message ?

Actually I'm trying to make Gnus/Emacs work with MS Exchange server
(if anybody knows better solution, please inform me - but read below
for some details). Because of some changes in a company I'm working
for in a few weeks I won't be able to use POP3 server I'm using now
and POP3 will NOT be installed on MS Exchange server too (it's a
company policy, not an administrator decision).

The solution I'm trying to implement now is to make MS Outlook a
gateway between Gnus/Emacs and Exchange. Since MS Exchange
provides SMTP service (it seems that it won't be turned off), the
problem is with fetching incoming mail. So I wrote simple MTA that
simply saves incoming messages in the certain directory (it's enough
for Gnus) and made Outlook forward messages I'm interested in to that
MTA. The only problem is that MS Outlook strips almost all headers from the
message, so it's impossible to sort them and so on. Is there any way
to make Outlook forward messages verbatim ? Although even this
crippled solution may work (well, it's possible to sort messages
inside Outlook sending them to different addresses and then make
necessary fields in MTA based on recipient address) I hope it can be
enhanced.

-- 
 							With regards, Roman.