* Sticky article buffers
@ 2007-07-25 15:32 Tassilo Horn
2007-07-25 18:36 ` Reiner Steib
0 siblings, 1 reply; 14+ messages in thread
From: Tassilo Horn @ 2007-07-25 15:32 UTC (permalink / raw)
To: ding
Hi,
my assignment papers have arrived at the FSF. Here's my patch, created
with a CVS checkout half an hour old. Please feel free to comment on it.
One thing that I'm aware of it that the binding `C-c s' is not too good,
because bindings with `C-c' should be reserved for the user. But what
other free binding could be used?
Bye,
Tassilo
--8<---------------cut here---------------start------------->8---
Index: lisp/gnus.el
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/gnus.el,v
retrieving revision 7.66
diff -r7.66 gnus.el
911a912,923
> (defun gnus-kill-all-sticky-article-buffers (confirm)
> "Kills all sticky article buffers. If a prefix arg is given,
> it'll ask for confirmation."
> (interactive "P")
> (dolist (buf (gnus-buffers))
> (with-current-buffer buf
> (when (eq major-mode 'gnus-sticky-article-mode)
> (if (not confirm)
> (gnus-kill-buffer buf)
> (when (yes-or-no-p (concat "Kill buffer " (buffer-name buf)))
> (gnus-kill-buffer buf)))))))
>
4360a4373,4378
>
> ;; Local Variables:
> ;; coding: iso-8859-1
> ;; indent-tabs-mode: t
> ;; tab-width: 8
> ;; End:
Index: lisp/gnus-art.el
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/gnus-art.el,v
retrieving revision 7.222
diff -r7.222 gnus-art.el
4354a4355,4383
> ;;; Gnus Sticky Article Mode
> ;;;
>
> (define-derived-mode gnus-sticky-article-mode gnus-article-mode "StickyArticle"
> "Mode for sticky articles."
> ;; Release bindings that won't work.
> (substitute-key-definition 'gnus-article-read-summary-keys 'undefined
> gnus-sticky-article-mode-map)
> (substitute-key-definition 'gnus-article-refer-article 'undefined
> gnus-sticky-article-mode-map)
> (dolist (k '("e" "h" "s" "F" "R"))
> (define-key gnus-sticky-article-mode-map k nil))
> (define-key gnus-sticky-article-mode-map "q" 'gnus-sticky-article-kill-buffer)
> (define-key gnus-sticky-article-mode-map "\C-hc" 'describe-key-briefly)
> (define-key gnus-sticky-article-mode-map "\C-hk" 'describe-key))
>
>
> (defun gnus-sticky-article-kill-buffer (&optional buffer)
> "Kills the given sticky article buffer. If none is given, it'll
> assume the current buffer and kill it if it has
> `gnus-sticky-article-mode'."
> (interactive)
> (unless buffer
> (setq buffer (current-buffer)))
> (with-current-buffer buffer
> (when (eq major-mode 'gnus-sticky-article-mode)
> (gnus-kill-buffer buffer))))
>
> ;;;
8089a8119,8124
>
> ;; Local Variables:
> ;; coding: iso-8859-1
> ;; indent-tabs-mode: t
> ;; tab-width: 8
> ;; End:
Index: lisp/gnus-sum.el
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/gnus-sum.el,v
retrieving revision 7.191
diff -r7.191 gnus-sum.el
1770a1771
> "\C-cs" gnus-summary-make-sticky-article
2446a2448
> ["Make article buffer sticky" gnus-summary-make-sticky-article t]
6940,6942c6942,6948
< (gnus-kill-buffer gnus-article-buffer)
< (gnus-kill-buffer gnus-original-article-buffer)
< (setq gnus-article-current nil))
---
> (when (gnus-buffer-live-p gnus-article-buffer)
> (with-current-buffer gnus-article-buffer
> ;; Don't kill sticky article buffers
> (unless (eq major-mode 'gnus-sticky-article-mode)
> (gnus-kill-buffer gnus-article-buffer)
> (setq gnus-article-current nil))))
> (gnus-kill-buffer gnus-original-article-buffer))
6974,6978d6979
< ;; If we have several article buffers, we kill them at exit.
< (unless gnus-single-article-buffer
< (gnus-kill-buffer gnus-article-buffer)
< (gnus-kill-buffer gnus-original-article-buffer)
< (setq gnus-article-current nil))
7910a7912,7953
> (defun gnus-summary-make-sticky-article (arg)
> "Make the current article sticky. If a prefix arg is given you
> will be asked for a name for this sticky buffer."
> (interactive "P")
> (gnus-configure-windows 'article)
> (gnus-summary-show-thread)
> (gnus-summary-select-article nil nil 'pseudo)
> (let (new-art-buf-name)
> (gnus-eval-in-buffer-window gnus-article-buffer
> (setq new-art-buf-name
> (rename-buffer
> (concat
> "*Sticky Article: "
> (if arg
> (read-from-minibuffer "Sticky article buffer name: ")
> (gnus-with-article-headers
> (gnus-article-goto-header "subject")
> (setq new-art-buf-name
> (buffer-substring-no-properties
> (line-beginning-position) (line-end-position)))
> (goto-char (point-min))
> (gnus-article-goto-header "from")
> (setq new-art-buf-name
> (concat
> new-art-buf-name ", "
> (buffer-substring-no-properties
> (line-beginning-position) (line-end-position))))
> (goto-char (point-min))
> (gnus-article-goto-header "date")
> (setq new-art-buf-name
> (concat
> new-art-buf-name ", "
> (buffer-substring-no-properties
> (line-beginning-position) (line-end-position))))))
> "*")
> t)))
> (setq gnus-article-buffer new-art-buf-name))
> (gnus-summary-recenter)
> (gnus-summary-position-point)
> (set-buffer gnus-article-buffer)
> (gnus-sticky-article-mode))
>
12434a12478,12479
> ;; indent-tabs-mode: t
> ;; tab-width: 8
--8<---------------cut here---------------end--------------->8---
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-07-25 15:32 Sticky article buffers Tassilo Horn
@ 2007-07-25 18:36 ` Reiner Steib
2007-07-25 19:32 ` Tassilo Horn
2007-07-25 20:17 ` Tassilo Horn
0 siblings, 2 replies; 14+ messages in thread
From: Reiner Steib @ 2007-07-25 18:36 UTC (permalink / raw)
To: ding
On Wed, Jul 25 2007, Tassilo Horn wrote:
> my assignment papers have arrived at the FSF. Here's my patch, [...]
Thank you.
> One thing that I'm aware of it that the binding `C-c s' is not too good,
> because bindings with `C-c' should be reserved for the user.
We should not install it with `C-c s'. If we can't find a better
binding, we can install it without a key binding first and add a
binding later.
> But what other free binding could be used?
If we stay with the term "sticky article buffer", I'd suggest `A S'.
Did you think about menu entries? Sometimes this helps to find
similar command and key bindings.
> diff -r7.66 gnus.el
> 911a912,923
Oh, please use unified diff (-u) (or context diff (-c)).
> 4360a4373,4378
>>
>> ;; Local Variables:
>> ;; coding: iso-8859-1
>> ;; indent-tabs-mode: t
>> ;; tab-width: 8
>> ;; End:
Please don't submit proposals that include unrelated changes.
>> (define-key gnus-sticky-article-mode-map k nil))
>> (define-key gnus-sticky-article-mode-map "q" 'gnus-sticky-article-kill-buffer)
I'd expect `k' for kill buffer and `q' for quit (bury buffer).
>> (define-key gnus-sticky-article-mode-map "\C-hc" 'describe-key-briefly)
>> (define-key gnus-sticky-article-mode-map "\C-hk" 'describe-key))
Why do we need to treat these two command specially?
>> (defun gnus-sticky-article-kill-buffer (&optional buffer)
>> "Kills the given sticky article buffer. If none is given, it'll
>> assume the current buffer and kill it if it has
>> `gnus-sticky-article-mode'."
[...]
>> (defun gnus-summary-make-sticky-article (arg)
>> "Make the current article sticky. If a prefix arg is given you
>> will be asked for a name for this sticky buffer."
The doc strings needs a little improvement. Cf. `M-x checkdoc-defun
RET'. But I may do this after installing the patch.
> 8089a8119,8124
>>
>> ;; Local Variables:
>> ;; coding: iso-8859-1
>> ;; indent-tabs-mode: t
>> ;; tab-width: 8
>> ;; End:
Please don't include unrelated changes. (Same for other
indent-tabs-mode/tab-width hunks below.)
> 1770a1771
>> "\C-cs" gnus-summary-make-sticky-article
Should be removed/change. See above.
> 2446a2448
>> ["Make article buffer sticky" gnus-summary-make-sticky-article t]
Okay, a menu entry. I'd too lazy to check where it would end up. In
unified/context diff it would be easier to guess. ;-)
Bye, Reiner.
--
,,,
(o o)
---ooO-(_)-Ooo--- | PGP key available | http://rsteib.home.pages.de/
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-07-25 18:36 ` Reiner Steib
@ 2007-07-25 19:32 ` Tassilo Horn
2007-07-25 20:17 ` Tassilo Horn
1 sibling, 0 replies; 14+ messages in thread
From: Tassilo Horn @ 2007-07-25 19:32 UTC (permalink / raw)
To: ding
Reiner Steib <reinersteib+gmane@imap.cc> writes:
Hi Reiner,
>> But what other free binding could be used?
>
> If we stay with the term "sticky article buffer", I'd suggest `A S'.
Will the translation from `A s' stop if I bind it to `A S'?
,----
| A s (translated from A S) runs the command gnus-summary-isearch-article
| which is an interactive compiled Lisp function in `gnus-sum.el'.
| It is bound to s, A s, <menu-bar> <Article> <Isearch article...>.
| (gnus-summary-isearch-article &optional REGEXP-P)
|
| Do incremental search forward on the current article.
| If REGEXP-P (the prefix) is non-nil, do regexp isearch.
`----
> Oh, please use unified diff (-u) (or context diff (-c)).
Ok.
>> 4360a4373,4378
>>>
>>> ;; Local Variables:
>>> ;; coding: iso-8859-1
>>> ;; indent-tabs-mode: t
>>> ;; tab-width: 8
>>> ;; End:
>
> Please don't submit proposals that include unrelated changes.
Hm, how do I tell `cvs diff' which hunks it should add and which not? Or
may I simply kill those lines before I submit the patch?
>>> (define-key gnus-sticky-article-mode-map k nil))
>>> (define-key gnus-sticky-article-mode-map "q" 'gnus-sticky-article-kill-buffer)
>
> I'd expect `k' for kill buffer and `q' for quit (bury buffer).
Ok, I'll change that.
>>> (define-key gnus-sticky-article-mode-map "\C-hc" 'describe-key-briefly)
>>> (define-key gnus-sticky-article-mode-map "\C-hk" 'describe-key))
>
> Why do we need to treat these two command specially?
I'm not really sure, but I had a hard time figuring out what to do so
that `C-h m' shows all possible bindings but none that don't work with
sticky articles.
>>> (defun gnus-sticky-article-kill-buffer (&optional buffer)
>>> "Kills the given sticky article buffer. If none is given, it'll
>>> assume the current buffer and kill it if it has
>>> `gnus-sticky-article-mode'."
> [...]
>>> (defun gnus-summary-make-sticky-article (arg)
>>> "Make the current article sticky. If a prefix arg is given you
>>> will be asked for a name for this sticky buffer."
>
> The doc strings needs a little improvement. Cf. `M-x checkdoc-defun
> RET'. But I may do this after installing the patch.
I'll do that.
Bye,
Tassilo
--
People sometimes ask me if it is a sin in the Church of Emacs to use
vi. Using a free version of vi is not a sin; it is a penance. So happy
hacking. (Richard M. Stallman)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-07-25 18:36 ` Reiner Steib
2007-07-25 19:32 ` Tassilo Horn
@ 2007-07-25 20:17 ` Tassilo Horn
2007-08-12 11:15 ` Reiner Steib
1 sibling, 1 reply; 14+ messages in thread
From: Tassilo Horn @ 2007-07-25 20:17 UTC (permalink / raw)
To: ding
Hi,
here's a new patch. I did some renaming
(`gnus-sticky-article-kill-buffer' => `gnus-kill-sticky-article-buffer')
and moved that function to gnus.el.
The key to make an article sticky is now `A S' and "q" buries the
buffer -- "k" kills it.
The doc strings should be ok now, too.
I hope the patch works, I just killed the lines modifying file local
variables.
Bye,
Tassilo
--8<---------------cut here---------------start------------->8---
Index: lisp/gnus.el
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/gnus.el,v
retrieving revision 7.66
diff -u -r7.66 gnus.el
--- lisp/gnus.el 4 Jun 2007 11:58:52 -0000 7.66
+++ lisp/gnus.el 25 Jul 2007 20:07:42 -0000
@@ -909,6 +909,29 @@
(setcdr buffers (cddr buffers)))))
gnus-buffers)
+(defun gnus-kill-sticky-article-buffer (&optional buffer)
+ "Kill the given sticky article BUFFER.
+If none is given, assume the current buffer and kill it if it has
+`gnus-sticky-article-mode'."
+ (interactive)
+ (unless buffer
+ (setq buffer (current-buffer)))
+ (with-current-buffer buffer
+ (when (eq major-mode 'gnus-sticky-article-mode)
+ (gnus-kill-buffer buffer))))
+
+(defun gnus-kill-all-sticky-article-buffers (arg)
+ "Kill all sticky article buffers.
+If a prefix ARG is given, ask for confirmation."
+ (interactive "P")
+ (dolist (buf (gnus-buffers))
+ (with-current-buffer buf
+ (when (eq major-mode 'gnus-sticky-article-mode)
+ (if (not arg)
+ (gnus-kill-buffer buf)
+ (when (yes-or-no-p (concat "Kill buffer " (buffer-name buf) "? "))
+ (gnus-kill-buffer buf)))))))
+
;;; Splash screen.
(defvar gnus-group-buffer "*Group*")
Index: lisp/gnus-art.el
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/gnus-art.el,v
retrieving revision 7.222
diff -u -r7.222 gnus-art.el
--- lisp/gnus-art.el 20 Jul 2007 11:30:50 -0000 7.222
+++ lisp/gnus-art.el 25 Jul 2007 20:07:55 -0000
@@ -4352,6 +4352,24 @@
(gnus-run-hooks 'gnus-article-prepare-hook)))
;;;
+;;; Gnus Sticky Article Mode
+;;;
+
+(define-derived-mode gnus-sticky-article-mode gnus-article-mode "StickyArticle"
+ "Mode for sticky articles."
+ ;; Release bindings that won't work.
+ (substitute-key-definition 'gnus-article-read-summary-keys 'undefined
+ gnus-sticky-article-mode-map)
+ (substitute-key-definition 'gnus-article-refer-article 'undefined
+ gnus-sticky-article-mode-map)
+ (dolist (k '("e" "h" "s" "F" "R"))
+ (define-key gnus-sticky-article-mode-map k nil))
+ (define-key gnus-sticky-article-mode-map "k" 'gnus-kill-sticky-article-buffer)
+ (define-key gnus-sticky-article-mode-map "q" 'bury-buffer)
+ (define-key gnus-sticky-article-mode-map "\C-hc" 'describe-key-briefly)
+ (define-key gnus-sticky-article-mode-map "\C-hk" 'describe-key))
+
+;;;
;;; Gnus MIME viewing functions
;;;
Index: lisp/gnus-sum.el
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/gnus-sum.el,v
retrieving revision 7.191
diff -u -r7.191 gnus-sum.el
--- lisp/gnus-sum.el 23 Jul 2007 23:44:36 -0000 7.191
+++ lisp/gnus-sum.el 25 Jul 2007 20:08:17 -0000
@@ -1997,6 +1997,7 @@
"g" gnus-summary-show-article
"s" gnus-summary-isearch-article
"P" gnus-summary-print-article
+ "S" gnus-summary-make-sticky-article
"M" gnus-mailing-list-insinuate
"t" gnus-article-babel)
@@ -2444,6 +2445,7 @@
["Remove article" gnus-cache-remove-article t])
["Translate" gnus-article-babel t]
["Select article buffer" gnus-summary-select-article-buffer t]
+ ["Make article buffer sticky" gnus-summary-make-sticky-article t]
["Enter digest buffer" gnus-summary-enter-digest-group t]
["Isearch article..." gnus-summary-isearch-article t]
["Beginning of the article" gnus-summary-beginning-of-article t]
@@ -6937,9 +6939,13 @@
(gnus-run-hooks 'gnus-summary-prepare-exit-hook)
;; If we have several article buffers, we kill them at exit.
(unless gnus-single-article-buffer
- (gnus-kill-buffer gnus-article-buffer)
- (gnus-kill-buffer gnus-original-article-buffer)
- (setq gnus-article-current nil))
+ (when (gnus-buffer-live-p gnus-article-buffer)
+ (with-current-buffer gnus-article-buffer
+ ;; Don't kill sticky article buffers
+ (unless (eq major-mode 'gnus-sticky-article-mode)
+ (gnus-kill-buffer gnus-article-buffer)
+ (setq gnus-article-current nil))))
+ (gnus-kill-buffer gnus-original-article-buffer))
(when gnus-use-cache
(gnus-cache-possibly-remove-articles)
(gnus-cache-save-buffers))
@@ -6971,11 +6977,6 @@
(setq group-point (point))
(if temporary
nil ;Nothing to do.
- ;; If we have several article buffers, we kill them at exit.
- (unless gnus-single-article-buffer
- (gnus-kill-buffer gnus-article-buffer)
- (gnus-kill-buffer gnus-original-article-buffer)
- (setq gnus-article-current nil))
(set-buffer buf)
(if (not gnus-kill-summary-on-exit)
(progn
@@ -7908,6 +7909,49 @@
(error "Article history empty")))
(gnus-summary-position-point))
+(defun gnus-summary-make-sticky-article (arg)
+ "Make the current article sticky.
+If a prefix ARG is given, ask for a name for this sticky article
+buffer."
+ (interactive "P")
+ (gnus-configure-windows 'article)
+ (gnus-summary-show-thread)
+ (gnus-summary-select-article nil nil 'pseudo)
+ (let (new-art-buf-name)
+ (gnus-eval-in-buffer-window gnus-article-buffer
+ (setq new-art-buf-name
+ (rename-buffer
+ (concat
+ "*Sticky Article: "
+ (if arg
+ (read-from-minibuffer "Sticky article buffer name: ")
+ (gnus-with-article-headers
+ (gnus-article-goto-header "subject")
+ (setq new-art-buf-name
+ (buffer-substring-no-properties
+ (line-beginning-position) (line-end-position)))
+ (goto-char (point-min))
+ (gnus-article-goto-header "from")
+ (setq new-art-buf-name
+ (concat
+ new-art-buf-name ", "
+ (buffer-substring-no-properties
+ (line-beginning-position) (line-end-position))))
+ (goto-char (point-min))
+ (gnus-article-goto-header "date")
+ (setq new-art-buf-name
+ (concat
+ new-art-buf-name ", "
+ (buffer-substring-no-properties
+ (line-beginning-position) (line-end-position))))))
+ "*")
+ t)))
+ (setq gnus-article-buffer new-art-buf-name))
+ (gnus-summary-recenter)
+ (gnus-summary-position-point)
+ (set-buffer gnus-article-buffer)
+ (gnus-sticky-article-mode))
+
;; Summary commands and functions for limiting the summary buffer.
(defun gnus-summary-limit-to-articles (n)
--8<---------------cut here---------------end--------------->8---
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-07-25 20:17 ` Tassilo Horn
@ 2007-08-12 11:15 ` Reiner Steib
2007-08-12 11:59 ` Tassilo Horn
0 siblings, 1 reply; 14+ messages in thread
From: Reiner Steib @ 2007-08-12 11:15 UTC (permalink / raw)
To: Tassilo Horn; +Cc: ding
On Wed, Jul 25 2007, Tassilo Horn wrote:
> here's a new patch.
Thanks for your patch and sorry for the delay. I have applied it to
the trunk.
> I did some renaming (`gnus-sticky-article-kill-buffer' =>
> `gnus-kill-sticky-article-buffer') and moved that function to
> gnus.el.
I also did some renaming and move functions around. Please let me now
if you disagree with my changes.
> The key to make an article sticky is now `A S' and "q" buries the
> buffer -- "k" kills it. The doc strings should be ok now, too.
I noticed some minor problems WRT article mode key bindings. I'll
come back to this and some UI improvements later.
> I hope the patch works, I just killed the lines modifying file local
> variables.
It worked. For future contributions:
- Please also provide a ChangeLog entries.
- When diffing in lisp/ (personally I'd suggest PCL-CVS (info
"(pcl-cvs)Top")) makes it slightly easier to apply the patch.
- Could you provide documentation for texi/gnus.texi and an entry for
texi/gnus-news.texi?
Bye, Reiner.
--
,,,
(o o)
---ooO-(_)-Ooo--- | PGP key available | http://rsteib.home.pages.de/
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-12 11:15 ` Reiner Steib
@ 2007-08-12 11:59 ` Tassilo Horn
2007-08-12 12:43 ` Reiner Steib
0 siblings, 1 reply; 14+ messages in thread
From: Tassilo Horn @ 2007-08-12 11:59 UTC (permalink / raw)
To: ding
Reiner Steib <reinersteib+gmane@imap.cc> writes:
Hi Reiner,
>> I did some renaming (`gnus-sticky-article-kill-buffer' =>
>> `gnus-kill-sticky-article-buffer') and moved that function to
>> gnus.el.
>
> I also did some renaming and move functions around. Please let me now
> if you disagree with my changes.
No, not at all.
>> The key to make an article sticky is now `A S' and "q" buries the
>> buffer -- "k" kills it. The doc strings should be ok now, too.
>
> I noticed some minor problems WRT article mode key bindings. I'll
> come back to this and some UI improvements later.
Ok.
>> I hope the patch works, I just killed the lines modifying file local
>> variables.
>
> It worked. For future contributions:
>
> - Please also provide a ChangeLog entries.
Is there something to create them automatically, so that I only need to
add comments to the functions I cahnged?
> - When diffing in lisp/ (personally I'd suggest PCL-CVS (info
> "(pcl-cvs)Top")) makes it slightly easier to apply the patch.
I'll read it.
> - Could you provide documentation for texi/gnus.texi and an entry for
> texi/gnus-news.texi?
I think this applies to the current patch as well as to future
contributions, right? I'll add some docs the next week.
Bye,
Tassilo
--
Nothing can escape the gravity of a black hole, except for Chuck
Norris. Chuck Norris eats black holes. They taste like chicken.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-12 11:59 ` Tassilo Horn
@ 2007-08-12 12:43 ` Reiner Steib
2007-08-13 13:03 ` Tassilo Horn
0 siblings, 1 reply; 14+ messages in thread
From: Reiner Steib @ 2007-08-12 12:43 UTC (permalink / raw)
To: ding
On Sun, Aug 12 2007, Tassilo Horn wrote:
> Reiner Steib <reinersteib+gmane@imap.cc> writes:
>> - Please also provide a ChangeLog entries.
>
> Is there something to create them automatically, so that I only need to
> add comments to the functions I cahnged?
Sure: When point is inside the modified defun, defcustom, ... (in the
lisp or texi file or in the diff buffer) you can use `C-x 4 a'
(`add-change-log-entry-other-window' or `M-x add-change-log-entry
RET').
>> - Could you provide documentation for texi/gnus.texi and an entry for
>> texi/gnus-news.texi?
>
> I think this applies to the current patch as well as to future
> contributions, right?
Yes.
> I'll add some docs the next week.
Bye, Reiner.
--
,,,
(o o)
---ooO-(_)-Ooo--- | PGP key available | http://rsteib.home.pages.de/
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-12 12:43 ` Reiner Steib
@ 2007-08-13 13:03 ` Tassilo Horn
2007-08-13 14:04 ` Tassilo Horn
0 siblings, 1 reply; 14+ messages in thread
From: Tassilo Horn @ 2007-08-13 13:03 UTC (permalink / raw)
To: ding
Reiner Steib <reinersteib+gmane@imap.cc> writes:
Hi Reiner,
>> Is there something to create them automatically, so that I only need
>> to add comments to the functions I cahnged?
>
> Sure: When point is inside the modified defun, defcustom, ... (in the
> lisp or texi file or in the diff buffer) you can use `C-x 4 a'
> (`add-change-log-entry-other-window' or `M-x add-change-log-entry
> RET').
Nifty.
>>> - Could you provide documentation for texi/gnus.texi and an entry
>>> for texi/gnus-news.texi?
>>
>> I think this applies to the current patch as well as to future
>> contributions, right?
>
> Yes.
Ok, here's the patch, created with pcl-cvs which is indeed very nice.
--8<---------------cut here---------------start------------->8---
Index: texi/gnus.texi
===================================================================
RCS file: /usr/local/cvsroot/gnus/texi/gnus.texi,v
retrieving revision 7.242
diff -u -r7.242 gnus.texi
--- texi/gnus.texi 10 Aug 2007 02:34:24 -0000 7.242
+++ texi/gnus.texi 13 Aug 2007 13:00:17 -0000
@@ -496,6 +496,7 @@
* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
* Article Caching:: You may store articles in a cache.
* Persistent Articles:: Making articles expiry-resistant.
+* Sticky Articles:: Article buffers that are not reused.
* Article Backlog:: Having already read articles hang around.
* Saving Articles:: Ways of customizing article saving.
* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
@@ -4598,6 +4599,7 @@
* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
* Article Caching:: You may store articles in a cache.
* Persistent Articles:: Making articles expiry-resistant.
+* Sticky Articles:: Article buffers that are not reused.
* Article Backlog:: Having already read articles hang around.
* Saving Articles:: Ways of customizing article saving.
* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
@@ -7484,6 +7486,53 @@
(setq gnus-use-cache 'passive)
@end lisp
+@node Sticky Articles
+@section Sticky Articles
+@cindex sticky articles
+
+When you select an article the current article buffer will be reused
+according to the value of the variable
+@code{gnus-single-article-buffer}. If its value is non-nil (the
+default) all articles reuse the same article buffer. Else each group
+has its own article buffer.
+
+This implies that it's not possible to have more than one article buffer
+in a group at a time. But sometimes you might want to display all the
+latest emails from your mother, your father, your aunt, your uncle and
+your 17 cousins to coordinate the next christmas party.
+
+That's where sticky articles come in handy. A sticky article buffer
+basically is a normal article buffer, but it won't be reused when you
+select another article. You can make an article sticky with:
+
+@table @kbd
+@item A S
+@kindex A S (Summary)
+@findex gnus-sticky-article
+Make the current article sticky. If a prefix arg is given, ask for a
+name for this sticky article buffer.
+@end table
+
+To close a sticky article buffer you can use these commands:
+
+@table @kbd
+@item q
+@kindex q (Article)
+@findex bury-buffer
+Puts this sticky article buffer at the end of the list of all buffers.
+
+@item k
+@kindex k (Article)
+@findex gnus-kill-sticky-article-buffer
+Kills this sticky article buffer.
+@end table
+
+To kill all sticky article buffers you can use:
+
+@defun gnus-kill-sticky-article-buffers ARG
+Kill all sticky article buffers.
+If a prefix ARG is given, ask for confirmation.
+@end defun
@node Article Backlog
@section Article Backlog
@@ -26195,6 +26244,7 @@
P. E. Jareth Hein,
Hisashige Kenji, @c Hisashige
Scott Hofmann,
+Tassilo Horn,
Marc Horowitz,
Gunnar Horrigmo,
Richard Hoskins,
--8<---------------cut here---------------end--------------->8---
Bye,
Tassilo
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-13 13:03 ` Tassilo Horn
@ 2007-08-13 14:04 ` Tassilo Horn
2007-08-14 5:18 ` Katsumi Yamaoka
2007-08-14 6:12 ` Katsumi Yamaoka
0 siblings, 2 replies; 14+ messages in thread
From: Tassilo Horn @ 2007-08-13 14:04 UTC (permalink / raw)
To: ding
Hi,
and sorry for the incomplete patch. I wasn't aware of the fact that cvs
diff commands don't operate on all marked files by default in pcl-cvs.
Here's the complete patch.
--8<---------------cut here---------------start------------->8---
Index: texi/gnus.texi
===================================================================
RCS file: /usr/local/cvsroot/gnus/texi/gnus.texi,v
retrieving revision 7.242
diff -u -r7.242 gnus.texi
--- texi/gnus.texi 10 Aug 2007 02:34:24 -0000 7.242
+++ texi/gnus.texi 13 Aug 2007 14:02:35 -0000
@@ -496,6 +496,7 @@
* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
* Article Caching:: You may store articles in a cache.
* Persistent Articles:: Making articles expiry-resistant.
+* Sticky Articles:: Article buffers that are not reused.
* Article Backlog:: Having already read articles hang around.
* Saving Articles:: Ways of customizing article saving.
* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
@@ -4598,6 +4599,7 @@
* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
* Article Caching:: You may store articles in a cache.
* Persistent Articles:: Making articles expiry-resistant.
+* Sticky Articles:: Article buffers that are not reused.
* Article Backlog:: Having already read articles hang around.
* Saving Articles:: Ways of customizing article saving.
* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
@@ -7484,6 +7486,53 @@
(setq gnus-use-cache 'passive)
@end lisp
+@node Sticky Articles
+@section Sticky Articles
+@cindex sticky articles
+
+When you select an article the current article buffer will be reused
+according to the value of the variable
+@code{gnus-single-article-buffer}. If its value is non-nil (the
+default) all articles reuse the same article buffer. Else each group
+has its own article buffer.
+
+This implies that it's not possible to have more than one article buffer
+in a group at a time. But sometimes you might want to display all the
+latest emails from your mother, your father, your aunt, your uncle and
+your 17 cousins to coordinate the next christmas party.
+
+That's where sticky articles come in handy. A sticky article buffer
+basically is a normal article buffer, but it won't be reused when you
+select another article. You can make an article sticky with:
+
+@table @kbd
+@item A S
+@kindex A S (Summary)
+@findex gnus-sticky-article
+Make the current article sticky. If a prefix arg is given, ask for a
+name for this sticky article buffer.
+@end table
+
+To close a sticky article buffer you can use these commands:
+
+@table @kbd
+@item q
+@kindex q (Article)
+@findex bury-buffer
+Puts this sticky article buffer at the end of the list of all buffers.
+
+@item k
+@kindex k (Article)
+@findex gnus-kill-sticky-article-buffer
+Kills this sticky article buffer.
+@end table
+
+To kill all sticky article buffers you can use:
+
+@defun gnus-kill-sticky-article-buffers ARG
+Kill all sticky article buffers.
+If a prefix ARG is given, ask for confirmation.
+@end defun
@node Article Backlog
@section Article Backlog
@@ -26195,6 +26244,7 @@
P. E. Jareth Hein,
Hisashige Kenji, @c Hisashige
Scott Hofmann,
+Tassilo Horn,
Marc Horowitz,
Gunnar Horrigmo,
Richard Hoskins,
Index: texi/gnus-news.texi
===================================================================
RCS file: /usr/local/cvsroot/gnus/texi/gnus-news.texi,v
retrieving revision 7.52
diff -u -r7.52 gnus-news.texi
--- texi/gnus-news.texi 4 Jul 2007 19:39:52 -0000 7.52
+++ texi/gnus-news.texi 13 Aug 2007 14:02:37 -0000
@@ -69,6 +69,11 @@
@item Changes in summary and article mode
@itemize @bullet
+
+@item Gnus now supports sticky article buffers. Those are article buffers
+that are not reused when you select another article. @xref{Sticky
+Articles}.
+
@item International host names (@acronym{IDNA}) can now be decoded
inside article bodies using @kbd{W i}
(@code{gnus-summary-idna-message}). This requires that GNU Libidn
Index: texi/ChangeLog
===================================================================
RCS file: /usr/local/cvsroot/gnus/texi/ChangeLog,v
retrieving revision 7.343
diff -u -r7.343 ChangeLog
--- texi/ChangeLog 10 Aug 2007 02:34:24 -0000 7.343
+++ texi/ChangeLog 13 Aug 2007 14:02:44 -0000
@@ -1,3 +1,9 @@
+2007-08-13 Tassilo Horn <tassilo@member.fsf.org>
+
+ * gnus-news.texi: Mention sticky article buffers.
+
+ * gnus.texi (Sticky Articles): Documentation for sticky article buffers.
+
2007-08-10 Katsumi Yamaoka <yamaoka@jpl.org>
* gnus.texi (NNTP): Mention nntp-xref-number-is-evil.
--8<---------------cut here---------------end--------------->8---
Bye,
Tassilo
--
GNU Emacs is a text editor for Über-Geeks.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-13 14:04 ` Tassilo Horn
@ 2007-08-14 5:18 ` Katsumi Yamaoka
2007-08-14 7:34 ` Tassilo Horn
2007-08-14 6:12 ` Katsumi Yamaoka
1 sibling, 1 reply; 14+ messages in thread
From: Katsumi Yamaoka @ 2007-08-14 5:18 UTC (permalink / raw)
To: ding
[-- Attachment #1: Type: text/plain, Size: 1404 bytes --]
Hi,
Thank you for contributing a good feature. I tried it today and
realized it is really useful. Though I have no plan for the moment,
people might want a browser function for many sticky articles. :)
Please let me write about a few problems in `gnus-sticky-article'.
1. (gnus-configure-windows 'article) makes an empty article
buffer and leads creating of an empty sticky article if there
is no article buffer initially, but is not necessary because
`gnus-summary-select-article' runs it by way of
`gnus-summary-display-article' and `gnus-article-prepare'
after preparing an article.
2. It seems to be useless that this command always makes a new
sticky article buffer. I mean, performing of the `A S'
command repeatedly on an article creates "*Sticky Article*",
"*Sticky Article*<2>", "*Sticky Article*<3>"...
3. The value of the `gnus-article-buffer' variable in the summary
buffer is not updated when I select another (normal) article.
Because of this, a non-ASCII article or a QP-encoded article
is not decoded when I type `P' or `N' in the summary buffer.
4. I wish you to leave the value of the `indent-tabs-mode'
variable the default if there is no good reason. Now some
lines are indented with tabs but others aren't.
I tried improving these problems. Here are a replacement of the
`gnus-sticky-article' function and a patch for gnus-sum.el:
[-- Attachment #2: gnus-sticky-article --]
[-- Type: application/emacs-lisp, Size: 1468 bytes --]
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: patch for gnus-sum.el --]
[-- Type: text/x-patch, Size: 1067 bytes --]
--- gnus-sum.el~ 2007-08-12 22:04:34 +0000
+++ gnus-sum.el 2007-08-14 05:13:43 +0000
@@ -7413,15 +7413,15 @@
(defun gnus-summary-display-article (article &optional all-header)
"Display ARTICLE in article buffer."
- (when (gnus-buffer-live-p gnus-article-buffer)
- (with-current-buffer gnus-article-buffer
- (mm-enable-multibyte)))
+ (unless (and (gnus-buffer-live-p gnus-article-buffer)
+ (with-current-buffer gnus-article-buffer
+ (eq major-mode 'gnus-article-mode)))
+ (gnus-article-setup-buffer))
(gnus-set-global-variables)
- (when (gnus-buffer-live-p gnus-article-buffer)
- (with-current-buffer gnus-article-buffer
- (setq gnus-article-charset gnus-newsgroup-charset)
- (setq gnus-article-ignored-charsets gnus-newsgroup-ignored-charsets)
- (mm-enable-multibyte)))
+ (with-current-buffer gnus-article-buffer
+ (setq gnus-article-charset gnus-newsgroup-charset)
+ (setq gnus-article-ignored-charsets gnus-newsgroup-ignored-charsets)
+ (mm-enable-multibyte))
(if (null article)
nil
(prog1
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-14 5:18 ` Katsumi Yamaoka
@ 2007-08-14 7:34 ` Tassilo Horn
2007-08-14 9:02 ` Katsumi Yamaoka
0 siblings, 1 reply; 14+ messages in thread
From: Tassilo Horn @ 2007-08-14 7:34 UTC (permalink / raw)
To: ding
[-- Attachment #1: Type: text/plain, Size: 2235 bytes --]
Katsumi Yamaoka <yamaoka@jpl.org> writes:
Hi Katsumi,
> Thank you for contributing a good feature. I tried it today and
> realized it is really useful.
Thanks for the compliments!
> Though I have no plan for the moment, people might want a browser
> function for many sticky articles. :)
Currently I use `ibuffer' and `s m' which sorts buffers by mode. But it
might be useful to switch between sticky article buffers with something
like `switch-to-buffer' which tab-completes only sticky articles. Or do
you have another suggestion?
Anyway, I applied your patch and tested it.
> Please let me write about a few problems in `gnus-sticky-article'.
>
> 1. (gnus-configure-windows 'article) makes an empty article
> buffer and leads creating of an empty sticky article if there
> is no article buffer initially, but is not necessary because
> `gnus-summary-select-article' runs it by way of
> `gnus-summary-display-article' and `gnus-article-prepare'
> after preparing an article.
Seems to work now.
> 2. It seems to be useless that this command always makes a new
> sticky article buffer. I mean, performing of the `A S'
> command repeatedly on an article creates "*Sticky Article*",
> "*Sticky Article*<2>", "*Sticky Article*<3>"...
Yes, that's indeed useless. With your patch it's fixed.
> 3. The value of the `gnus-article-buffer' variable in the summary
> buffer is not updated when I select another (normal) article.
> Because of this, a non-ASCII article or a QP-encoded article
> is not decoded when I type `P' or `N' in the summary buffer.
Seems to be fixed, too.
> 4. I wish you to leave the value of the `indent-tabs-mode'
> variable the default if there is no good reason. Now some
> lines are indented with tabs but others aren't.
Oh, sorry. I've put file local variables into the files I modified, but
maybe I inserted the spaces before I did that.
Is there a mechanism to set variables based on the directory a file
resides? If not I'll do something home-brewed and hook it into
find-file-hook.
> I tried improving these problems.
Thanks. As far as I can see all problems are fixed. Here's a patch
that incorporates all your changes plus a changelog entry.
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: Fix sticky articles --]
[-- Type: text/x-patch, Size: 5304 bytes --]
Index: lisp/gnus-sum.el
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/gnus-sum.el,v
retrieving revision 7.194
diff -u -r7.194 gnus-sum.el
--- lisp/gnus-sum.el 12 Aug 2007 11:02:19 -0000 7.194
+++ lisp/gnus-sum.el 14 Aug 2007 07:31:43 -0000
@@ -7413,15 +7413,15 @@
(defun gnus-summary-display-article (article &optional all-header)
"Display ARTICLE in article buffer."
- (when (gnus-buffer-live-p gnus-article-buffer)
- (with-current-buffer gnus-article-buffer
- (mm-enable-multibyte)))
+ (unless (and (gnus-buffer-live-p gnus-article-buffer)
+ (with-current-buffer gnus-article-buffer
+ (eq major-mode 'gnus-article-mode)))
+ (gnus-article-setup-buffer))
(gnus-set-global-variables)
- (when (gnus-buffer-live-p gnus-article-buffer)
- (with-current-buffer gnus-article-buffer
- (setq gnus-article-charset gnus-newsgroup-charset)
- (setq gnus-article-ignored-charsets gnus-newsgroup-ignored-charsets)
- (mm-enable-multibyte)))
+ (with-current-buffer gnus-article-buffer
+ (setq gnus-article-charset gnus-newsgroup-charset)
+ (setq gnus-article-ignored-charsets gnus-newsgroup-ignored-charsets)
+ (mm-enable-multibyte))
(if (null article)
nil
(prog1
Index: lisp/gnus-art.el
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/gnus-art.el,v
retrieving revision 7.225
diff -u -r7.225 gnus-art.el
--- lisp/gnus-art.el 12 Aug 2007 11:02:19 -0000 7.225
+++ lisp/gnus-art.el 14 Aug 2007 07:31:57 -0000
@@ -4371,46 +4371,46 @@
(defun gnus-sticky-article (arg)
"Make the current article sticky.
-If a prefix ARG is given, ask for a name for this sticky article
-buffer."
+If a prefix ARG is given, ask for a name for this sticky article buffer."
(interactive "P")
- (gnus-configure-windows 'article)
(gnus-summary-show-thread)
(gnus-summary-select-article nil nil 'pseudo)
(let (new-art-buf-name)
(gnus-eval-in-buffer-window gnus-article-buffer
(setq new-art-buf-name
- (rename-buffer
- (concat
- "*Sticky Article: "
- (if arg
- (read-from-minibuffer "Sticky article buffer name: ")
- (gnus-with-article-headers
- (gnus-article-goto-header "subject")
- (setq new-art-buf-name
- (buffer-substring-no-properties
- (line-beginning-position) (line-end-position)))
- (goto-char (point-min))
- (gnus-article-goto-header "from")
- (setq new-art-buf-name
- (concat
- new-art-buf-name ", "
- (buffer-substring-no-properties
- (line-beginning-position) (line-end-position))))
- (goto-char (point-min))
- (gnus-article-goto-header "date")
- (setq new-art-buf-name
- (concat
- new-art-buf-name ", "
- (buffer-substring-no-properties
- (line-beginning-position) (line-end-position))))))
- "*")
- t)))
+ (concat
+ "*Sticky Article: "
+ (if arg
+ (read-from-minibuffer "Sticky article buffer name: ")
+ (gnus-with-article-headers
+ (gnus-article-goto-header "subject")
+ (setq new-art-buf-name
+ (buffer-substring-no-properties
+ (line-beginning-position) (line-end-position)))
+ (goto-char (point-min))
+ (gnus-article-goto-header "from")
+ (setq new-art-buf-name
+ (concat
+ new-art-buf-name ", "
+ (buffer-substring-no-properties
+ (line-beginning-position) (line-end-position))))
+ (goto-char (point-min))
+ (gnus-article-goto-header "date")
+ (setq new-art-buf-name
+ (concat
+ new-art-buf-name ", "
+ (buffer-substring-no-properties
+ (line-beginning-position) (line-end-position))))))
+ "*"))
+ (if (and (gnus-buffer-live-p new-art-buf-name)
+ (with-current-buffer new-art-buf-name
+ (eq major-mode 'gnus-sticky-article-mode)))
+ (switch-to-buffer new-art-buf-name)
+ (rename-buffer new-art-buf-name t))
+ (gnus-sticky-article-mode))
(setq gnus-article-buffer new-art-buf-name))
(gnus-summary-recenter)
- (gnus-summary-position-point)
- (set-buffer gnus-article-buffer)
- (gnus-sticky-article-mode))
+ (gnus-summary-position-point))
(defun gnus-kill-sticky-article-buffer (&optional buffer)
"Kill the given sticky article BUFFER.
Index: lisp/ChangeLog
===================================================================
RCS file: /usr/local/cvsroot/gnus/lisp/ChangeLog,v
retrieving revision 7.1601
diff -u -r7.1601 ChangeLog
--- lisp/ChangeLog 13 Aug 2007 13:52:52 -0000 7.1601
+++ lisp/ChangeLog 14 Aug 2007 07:32:15 -0000
@@ -1,3 +1,10 @@
+2007-08-14 Tassilo Horn <tassilo@member.fsf.org>
+
+ * gnus-art.el (gnus-sticky-article): Fixed problems described in
+ <b4mps1qitio.fsf@jpl.org> on ding. Thanks to Katsumi.
+
+ * gnus-sum.el (gnus-summary-display-article): Likewise.
+
2007-08-13 Katsumi Yamaoka <yamaoka@jpl.org>
* gnus-agent.el (gnus-agent-decoded-group-names): New variable.
[-- Attachment #3: Type: text/plain, Size: 14 bytes --]
Bye,
Tassilo
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-14 7:34 ` Tassilo Horn
@ 2007-08-14 9:02 ` Katsumi Yamaoka
2007-08-14 10:41 ` Tassilo Horn
0 siblings, 1 reply; 14+ messages in thread
From: Katsumi Yamaoka @ 2007-08-14 9:02 UTC (permalink / raw)
To: ding
>>>>> Tassilo Horn wrote:
> Katsumi Yamaoka <yamaoka@jpl.org> writes:
>> Though I have no plan for the moment, people might want a browser
>> function for many sticky articles. :)
> Currently I use `ibuffer' and `s m' which sorts buffers by mode.
Or `/ m gnus-sticky-article-mode RET'. `ibuffer' may be good enough.
> But it might be useful to switch between sticky article buffers with
> something like `switch-to-buffer' which tab-completes only sticky
> articles. Or do you have another suggestion?
Frames for sticky articles, an exclusive Gnus summary buffer for
sticky articles, tab browsing like emacs-w3m..., but they all don't
seem to be easy to achieve.
> Anyway, I applied your patch and tested it.
Thanks. I've installed the patch.
> Is there a mechanism to set variables based on the directory a file
> resides?
I don't know.
> If not I'll do something home-brewed and hook it into find-file-hook.
It looks like this, isn't it? ;-)
(add-hook
'find-file-hook
(lambda nil
(if (string-match "/gnus/lisp/" buffer-file-name)
(set (make-local-variable 'indent-tabs-mode) t))))
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-14 9:02 ` Katsumi Yamaoka
@ 2007-08-14 10:41 ` Tassilo Horn
0 siblings, 0 replies; 14+ messages in thread
From: Tassilo Horn @ 2007-08-14 10:41 UTC (permalink / raw)
To: ding
Katsumi Yamaoka <yamaoka@jpl.org> writes:
Hi Katsumi,
> Frames for sticky articles,
How about ibuffer, mark the buffers with `m' and then do `v' (for
windows) or `H' (for frames)?
> an exclusive Gnus summary buffer for sticky articles,
I don't see where this could be more useful than ibuffer.
> tab browsing like emacs-w3m..., but they all don't seem to be easy to
> achieve.
Indeed.
>> If not I'll do something home-brewed and hook it into find-file-hook.
>
> It looks like this, isn't it? ;-)
>
> [...]
Hah! It's far superior. ;-)
--8<---------------cut here---------------start------------->8---
(defvar th-dir-local-variables-alist
'(("~/repos/gnus/" . ((indent-tabs-mode . t)
(tab-width . 8))))
"An alist with (PATH . LIST) pairs. PATH is a path and LIST is
a list of variables to set locally for files below that path. It
has elements of the form (VAR . VAL) where VAR is a symbol and
VAL is its value.")
(defun th-set-dir-local-variables ()
"Locally set the variables defined in
`th-dir-local-variables-alist' for the current buffer."
(interactive)
(let ((file (buffer-file-name (current-buffer))))
(when file
(dolist (pair th-dir-local-variables-alist)
(when (string-match (concat "^" (regexp-quote (expand-file-name (car pair))))
file)
(dolist (var (cdr pair))
(if (local-variable-if-set-p (car var))
(set (car var) (cdr var))
(set (make-local-variable (car var)) (cdr var)))))))))
(add-hook 'find-file-hook
'th-set-dir-local-variables)
--8<---------------cut here---------------end--------------->8---
Bye,
Tassilo
--
Chuck Norris uses 8'x10' sheets of plywood as toilet paper.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Sticky article buffers
2007-08-13 14:04 ` Tassilo Horn
2007-08-14 5:18 ` Katsumi Yamaoka
@ 2007-08-14 6:12 ` Katsumi Yamaoka
1 sibling, 0 replies; 14+ messages in thread
From: Katsumi Yamaoka @ 2007-08-14 6:12 UTC (permalink / raw)
To: ding
>>>>> Tassilo Horn wrote:
> +2007-08-13 Tassilo Horn <tassilo@member.fsf.org>
> +
> + * gnus-news.texi: Mention sticky article buffers.
> +
> + * gnus.texi (Sticky Articles): Documentation for sticky article buffers.
Installed.
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2007-08-14 10:41 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-07-25 15:32 Sticky article buffers Tassilo Horn
2007-07-25 18:36 ` Reiner Steib
2007-07-25 19:32 ` Tassilo Horn
2007-07-25 20:17 ` Tassilo Horn
2007-08-12 11:15 ` Reiner Steib
2007-08-12 11:59 ` Tassilo Horn
2007-08-12 12:43 ` Reiner Steib
2007-08-13 13:03 ` Tassilo Horn
2007-08-13 14:04 ` Tassilo Horn
2007-08-14 5:18 ` Katsumi Yamaoka
2007-08-14 7:34 ` Tassilo Horn
2007-08-14 9:02 ` Katsumi Yamaoka
2007-08-14 10:41 ` Tassilo Horn
2007-08-14 6:12 ` Katsumi Yamaoka
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).