* not forward html part?
@ 2007-08-23 20:16 Michael
2007-08-23 23:09 ` Katsumi Yamaoka
0 siblings, 1 reply; 6+ messages in thread
From: Michael @ 2007-08-23 20:16 UTC (permalink / raw)
To: ding
Hi, as you know, some people wrote emails in an "intelligent" mailer that
sends out both a plain text and an HTML part. Gnus would only show the
plain text which is not problem.
When I forward these emails though, both parts are forwarded. How can I
strip off the HTML part and only forward the text?
Thanks
Michael
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: not forward html part?
2007-08-23 20:16 not forward html part? Michael
@ 2007-08-23 23:09 ` Katsumi Yamaoka
2007-09-06 5:36 ` Michael
0 siblings, 1 reply; 6+ messages in thread
From: Katsumi Yamaoka @ 2007-08-23 23:09 UTC (permalink / raw)
To: ding
>>>>> Michael wrote:
> Hi, as you know, some people wrote emails in an "intelligent" mailer that
> sends out both a plain text and an HTML part. Gnus would only show the
> plain text which is not problem.
> When I forward these emails though, both parts are forwarded. How can I
> strip off the HTML part and only forward the text?
How about using the `C-d' command (in the summary buffer) that
divides such a mail into parts?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: not forward html part?
2007-08-23 23:09 ` Katsumi Yamaoka
@ 2007-09-06 5:36 ` Michael
2007-09-06 6:41 ` Katsumi Yamaoka
0 siblings, 1 reply; 6+ messages in thread
From: Michael @ 2007-09-06 5:36 UTC (permalink / raw)
To: ding
On 23 Aug 2007, Katsumi Yamaoka wrote:
>>>>> Michael wrote:
> > Hi, as you know, some people wrote emails in an "intelligent" mailer that
> > sends out both a plain text and an HTML part. Gnus would only show the
> > plain text which is not problem.
>
> > When I forward these emails though, both parts are forwarded. How can I
> > strip off the HTML part and only forward the text?
>
> How about using the `C-d' command (in the summary buffer) that
> divides such a mail into parts?
Thanks for telling me the command. It was not obvious to me what it does
until I tried it.
It does help so I can select which part to forward. But how about if I want
to forward more than one part (i.e., also including the attachment?)
Michael
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: not forward html part?
2007-09-06 5:36 ` Michael
@ 2007-09-06 6:41 ` Katsumi Yamaoka
2007-09-07 17:07 ` Michael
0 siblings, 1 reply; 6+ messages in thread
From: Katsumi Yamaoka @ 2007-09-06 6:41 UTC (permalink / raw)
To: ding
>>>>> Michael wrote:
> On 23 Aug 2007, Katsumi Yamaoka wrote:
>>>>>> Michael wrote:
>>> Hi, as you know, some people wrote emails in an "intelligent" mailer that
>>> sends out both a plain text and an HTML part. Gnus would only show the
>>> plain text which is not problem.
>>
>>> When I forward these emails though, both parts are forwarded. How can I
>>> strip off the HTML part and only forward the text?
>>
>> How about using the `C-d' command (in the summary buffer) that
>> divides such a mail into parts?
> Thanks for telling me the command. It was not obvious to me what it does
> until I tried it.
> It does help so I can select which part to forward. But how about if I want
> to forward more than one part (i.e., also including the attachment?)
In any group, including the nndoc-group (in which there are
divided parts), mark articles that you want to forward by typing
the `#' key, and then type `C-c C-f' (or `S o m'). Any part
that looks as follows can be deleted after composing a message
buffer.
--8<---------------cut here---------------start------------->8---
<#mml type=message/rfc822>
[...]
<#/mml>
--8<---------------cut here---------------end--------------->8---
You can also delete even the `<#multipart type=digest>' tag at
the beginning of a message body, and the `<#/multipart>' tag at
the end.
In addition, I recommend using the `C-c C-m P' (or `M-x
mml-preview') command before sending a message in order to check
whether it will be encoded properly. If given a prefix argument,
it shows an encoded message in the raw form.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: not forward html part?
2007-09-06 6:41 ` Katsumi Yamaoka
@ 2007-09-07 17:07 ` Michael
2007-09-10 8:38 ` Katsumi Yamaoka
0 siblings, 1 reply; 6+ messages in thread
From: Michael @ 2007-09-07 17:07 UTC (permalink / raw)
To: ding
[-- Attachment #1: Type: text/plain, Size: 128 bytes --]
On 6 Sep 2007, Katsumi Yamaoka wrote:
> Any part
> that looks as follows can be deleted after composing a message
> buffer.
>
[-- Attachment #2: Type: message/rfc822, Size: 1 bytes --]
[-- Attachment #3: Type: text/plain, Size: 33 bytes --]
> You can also delete even the `
[-- Attachment #4: Type: text/plain, Size: 53 bytes --]
' tag at
> the beginning of a message body, and the `
[-- Attachment #5: Type: text/plain, Size: 252 bytes --]
> the end.
I was hoping some automatic way of doing this. If not at the time of
composing the buffer, perhaps a function to delete it afterward. The HTML
code can be quite long (i.e., from Outlook) and is nauseous to even look at.
Thanks,
Michael
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: not forward html part?
2007-09-07 17:07 ` Michael
@ 2007-09-10 8:38 ` Katsumi Yamaoka
0 siblings, 0 replies; 6+ messages in thread
From: Katsumi Yamaoka @ 2007-09-10 8:38 UTC (permalink / raw)
To: ding
[-- Attachment #1: Type: text/plain, Size: 586 bytes --]
>>>>> Michael wrote:
> On 6 Sep 2007, Katsumi Yamaoka wrote:
[...]
Perform `M-x mml-quote-region' on the message if there are things
that look like MML tags (e.g. `<#multipart type=digest>') but
should be sent as is. It cannot be automated.
> I was hoping some automatic way of doing this. If not at the time of
> composing the buffer, perhaps a function to delete it afterward. The HTML
> code can be quite long (i.e., from Outlook) and is nauseous to even look at.
I see. But there is no such ready-made function AFAIK. Try the
following (put it in your ~/.gnus.el file):
[-- Attachment #2: Type: application/emacs-lisp, Size: 1707 bytes --]
[-- Attachment #3: Type: text/plain, Size: 147 bytes --]
To disable this advice, type:
M-x ad-unadvise RET message-forward-make-body-mml RET
To enable it again, type:
M-x load-file RET ~/.gnus.el RET
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-09-10 8:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-08-23 20:16 not forward html part? Michael
2007-08-23 23:09 ` Katsumi Yamaoka
2007-09-06 5:36 ` Michael
2007-09-06 6:41 ` Katsumi Yamaoka
2007-09-07 17:07 ` Michael
2007-09-10 8:38 ` Katsumi Yamaoka
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).