Gnus development mailing list
 help / color / mirror / Atom feed
* smileys auto smileys
@ 2021-09-01  7:10 Uwe Brauer
  2021-09-01  7:22 ` Adam Sjøgren
  0 siblings, 1 reply; 22+ messages in thread
From: Uwe Brauer @ 2021-09-01  7:10 UTC (permalink / raw)
  To: ding


Hello

I am not sure whether this is a gnus only question, but who do you
display smiley(s) either in message mode, or in article mode when you
display a message. 


I use autosmiley, 

;;; autosmiley.el --- Convert smileys into their graphical
;;;    representation Damyan Pepper

a rather old package I must say



that works fine in message mode, but does not cover
all smiley(s) and I am not sure how to configure it.

Regards

Uwe Brauer 



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-01  7:10 smileys auto smileys Uwe Brauer
@ 2021-09-01  7:22 ` Adam Sjøgren
  2021-09-01  8:53   ` Uwe Brauer
  0 siblings, 1 reply; 22+ messages in thread
From: Adam Sjøgren @ 2021-09-01  7:22 UTC (permalink / raw)
  To: ding

Uwe writes:

> I am not sure whether this is a gnus only question, but who do you
> display smiley(s) either in message mode, or in article mode when you
> display a message. 

I use the functionality built into Gnus:

,----[ C-h v smiley-style RET ]
| smiley-style is a variable defined in ‘smiley.el’.
| 
| Its value is ‘emoji’
| Original value was ‘low-color’
| 
|   You can customize this variable.
|   This variable was introduced, or its default value was changed, in
|   version 23.1 of Emacs.
|   Probably introduced at or before Emacs version 28.1.
| 
| Smiley style.
`----

> that works fine in message mode, but does not cover
> all smiley(s) and I am not sure how to configure it.

If you use gnus/smiley.el, you can configure this alist:

,----[ C-h v smiley-emoji-regexp-alist RET ]
| smiley-emoji-regexp-alist is a variable defined in ‘smiley.el’.
| 
| Its value is shown below.
| 
|   You can customize this variable.
|   This variable was introduced, or its default value was changed, in
|   version 28.1 of Emacs.
| 
| A list of regexps to map smilies to emoji.
| The elements are (REGEXP MATCH EMOJI), where MATCH is the submatch in
| regexp to replace with EMOJI.
| 
| Value:
| (("\\(;-)\\)\\W" 1 "😉")
|  ("[^;]\\(;)\\)\\W" 1 "😉")
|  ("\\(:-]\\)\\W" 1 "😬")
|  ("\\(8-)\\)\\W" 1 "🥴")
|  ("\\(:-|\\)\\W" 1 "😐")
|  ("\\(:-[/\\]\\)\\W" 1 "😕")
|  ("\\(:-(\\)\\W" 1 "😠")
|  ("\\(X-)\\)\\W" 1 "😵")
|  ("\\(:-{\\)\\W" 1 "😦")
|  ("\\(>:-)\\)\\W" 1 "😈")
|  ("\\(;-(\\)\\W" 1 "😢")
|  ("\\(:-D\\)\\W" 1 "😀")
|  ("\\(O:-)\\)\\W" 1 "😇")
|  ("\\(\\^?:-?)\\)\\W" 1 "🙂"))
`----


  Best regards,

    Adam

-- 
 "Super heroes wear snow pants?"                            Adam Sjøgren
 "When there's snow out, they do!"                     asjo@koldfront.dk



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-01  7:22 ` Adam Sjøgren
@ 2021-09-01  8:53   ` Uwe Brauer
  2021-09-01 14:13     ` Adam Sjøgren
  0 siblings, 1 reply; 22+ messages in thread
From: Uwe Brauer @ 2021-09-01  8:53 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 930 bytes --]

>>> "AS" == Adam Sjøgren <asjo@koldfront.dk> writes:

> Uwe writes:
>> I am not sure whether this is a gnus only question, but who do you
>> display smiley(s) either in message mode, or in article mode when you
>> display a message. 

> I use the functionality built into Gnus:

> ,----[ C-h v smiley-style RET ]
> | smiley-style is a variable defined in ‘smiley.el’.
> | 
> | Its value is ‘emoji’
> | Original value was ‘low-color’

Interesting.  Thanks 

    1. With the low-color option auto-smiley displays smileys (but not
       all of them) in the message and the article buffers.

    2. With the emoji option, auto-smiley does not display any smiley,
       gnus, however does display most of the smiley in the article
       buffer but none in the message buffer.

Hm strange that is 


> |  ("\\(O:-)\\)\\W" 1 "😇")
> |  ("\\(\\^?:-?)\\)\\W" 1 "🙂"))
> `----


regards

[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-01  8:53   ` Uwe Brauer
@ 2021-09-01 14:13     ` Adam Sjøgren
  2021-09-02  7:21       ` Uwe Brauer
  0 siblings, 1 reply; 22+ messages in thread
From: Adam Sjøgren @ 2021-09-01 14:13 UTC (permalink / raw)
  To: ding

Uwe writes:

> Hm strange that is 

I doubt that gnus/smiley.el and your auto-smiley.el have been designed
to cooperate :-)


  Best regards,

    Adam

-- 
 "Where the world is going?                                 Adam Sjøgren
  Back to where it once was"                           asjo@koldfront.dk



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-01 14:13     ` Adam Sjøgren
@ 2021-09-02  7:21       ` Uwe Brauer
  2021-09-02  7:54         ` Adam Sjøgren
  2021-09-02 12:25         ` Eric S Fraga
  0 siblings, 2 replies; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02  7:21 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 374 bytes --]

>>> "AS" == Adam Sjøgren <asjo@koldfront.dk> writes:

> Uwe writes:
>> Hm strange that is 

> I doubt that gnus/smiley.el and your auto-smiley.el have been designed
> to cooperate :-)

Given that their relevant latest releases are 15 years apart I doubt this as well. 

If I understand your approach correctly you don't see the smileys while you type a message?

[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02  7:21       ` Uwe Brauer
@ 2021-09-02  7:54         ` Adam Sjøgren
  2021-09-02 12:25         ` Eric S Fraga
  1 sibling, 0 replies; 22+ messages in thread
From: Adam Sjøgren @ 2021-09-02  7:54 UTC (permalink / raw)
  To: ding

Uwe writes:

> If I understand your approach correctly you don't see the smileys while you type a message?

Correct, that would annoy me.

Sorry, I missed the part about composing messages - I don't think the
built-in smiley.el in Gnus tries to do that.


  :-),

   Adam

-- 
 "I like maxims that don't                                  Adam Sjøgren
  encourage behavior modification"                     asjo@koldfront.dk



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02  7:21       ` Uwe Brauer
  2021-09-02  7:54         ` Adam Sjøgren
@ 2021-09-02 12:25         ` Eric S Fraga
  2021-09-02 14:06           ` Uwe Brauer
  2021-09-02 14:17           ` Uwe Brauer
  1 sibling, 2 replies; 22+ messages in thread
From: Eric S Fraga @ 2021-09-02 12:25 UTC (permalink / raw)
  To: ding

On Thursday,  2 Sep 2021 at 09:21, Uwe Brauer wrote:
> If I understand your approach correctly you don't see the smileys
> while you type a message?

Correct: the gnus smiley package makes emojis appear when you view an
article but does not affect message composition.

The alternative, and this being Emacs there is always an alternative,
would be to insert the emojis directly when composing, as in

C-x 8 RET slightly smiling face RET

to give you 🙂.  This allows you to insert anything, not limited to
those emojis listed in the translation table posted earlier in this
thread including cats etc. 😉

-- 
Eric S Fraga via Emacs 28.0.50 & org 9.4.6 on Debian 11.0



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 12:25         ` Eric S Fraga
@ 2021-09-02 14:06           ` Uwe Brauer
  2021-09-02 14:17           ` Uwe Brauer
  1 sibling, 0 replies; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02 14:06 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 852 bytes --]

>>> "ESF" == Eric S Fraga <e.fraga@ucl.ac.uk> writes:

> On Thursday,  2 Sep 2021 at 09:21, Uwe Brauer wrote:
>> If I understand your approach correctly you don't see the smileys
>> while you type a message?

> Correct: the gnus smiley package makes emojis appear when you view an
> article but does not affect message composition.

> The alternative, and this being Emacs there is always an alternative,
> would be to insert the emojis directly when composing, as in

> C-x 8 RET slightly smiling face RET
🙂

Indeed this is really cool and was a looking for, I would then try to bind smiley to functions and then to keys, very nice indeed.


> to give you 🙂.  This allows you to insert anything, not limited to
> those emojis listed in the translation table posted earlier in this
> thread including cats etc. 😉

😎 

[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 12:25         ` Eric S Fraga
  2021-09-02 14:06           ` Uwe Brauer
@ 2021-09-02 14:17           ` Uwe Brauer
  2021-09-02 14:42             ` Eric S Fraga
  2021-09-02 14:49             ` smileys auto smileys Alberto Luaces
  1 sibling, 2 replies; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02 14:17 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 904 bytes --]

>>> "ESF" == Eric S Fraga <e.fraga@ucl.ac.uk> writes:

> On Thursday,  2 Sep 2021 at 09:21, Uwe Brauer wrote:
>> If I understand your approach correctly you don't see the smileys
>> while you type a message?

> Correct: the gnus smiley package makes emojis appear when you view an
> article but does not affect message composition.

> The alternative, and this being Emacs there is always an alternative,
> would be to insert the emojis directly when composing, as in

> C-x 8 RET slightly smiling face RET

> to give you 🙂.  This allows you to insert anything, not limited to
> those emojis listed in the translation table posted earlier in this
> thread including cats etc. 😉

I just realized that some fail, for example 
SMILING FACE WITH SMILING EYES AND HAND COVERING MOUTH gives  01F92D a sort of square  🤭
and 
SMILING FACE WITH TEAR 01F872 

What do I miss here?

[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 14:17           ` Uwe Brauer
@ 2021-09-02 14:42             ` Eric S Fraga
  2021-09-02 14:52               ` Alberto Luaces
  2021-09-02 15:37               ` Uwe Brauer
  2021-09-02 14:49             ` smileys auto smileys Alberto Luaces
  1 sibling, 2 replies; 22+ messages in thread
From: Eric S Fraga @ 2021-09-02 14:42 UTC (permalink / raw)
  To: ding

On Thursday,  2 Sep 2021 at 16:17, Uwe Brauer wrote:
> I just realized that some fail, for example 
> SMILING FACE WITH SMILING EYES AND HAND COVERING MOUTH gives 01F92D a
> sort of square 🤭

This works for me as does 🥲.

The key is the fonts you have available for displaying the emojis.

I have the following line in my init files:

(set-fontset-font t '(#x1f300 . #x1fad0) (font-spec :family "Noto Color Emoji"))
  
and obviously have the Noto font set installed (specifically the
fonts-noto-color-emoji package in Debian).  There probably are many
other choices for fonts for displaying emojis.

HTH,
eric

-- 
Eric S Fraga via Emacs 28.0.50 & org 9.4.6 on Debian 11.0



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 14:17           ` Uwe Brauer
  2021-09-02 14:42             ` Eric S Fraga
@ 2021-09-02 14:49             ` Alberto Luaces
  2021-09-02 19:10               ` Uwe Brauer
  1 sibling, 1 reply; 22+ messages in thread
From: Alberto Luaces @ 2021-09-02 14:49 UTC (permalink / raw)
  To: ding

Uwe Brauer <oub@mat.ucm.es> writes:

> I just realized that some fail, for example 
> SMILING FACE WITH SMILING EYES AND HAND COVERING MOUTH gives  01F92D a sort of square  🤭
> and 
> SMILING FACE WITH TEAR 01F872 
>
> What do I miss here?

I guess a capable font, because I can see your "hand covering mouth"
emoji is displaying just fine.  My computer says it is using "symbola"
for that.

The second is not available to me neither (🥲), I thought at least
"fonts-noto" would cover them all.

-- 
Alberto



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 14:42             ` Eric S Fraga
@ 2021-09-02 14:52               ` Alberto Luaces
  2021-09-03 15:36                 ` Eric S Fraga
  2021-09-02 15:37               ` Uwe Brauer
  1 sibling, 1 reply; 22+ messages in thread
From: Alberto Luaces @ 2021-09-02 14:52 UTC (permalink / raw)
  To: ding

Eric S Fraga <e.fraga@ucl.ac.uk> writes:

> (set-fontset-font t '(#x1f300 . #x1fad0) (font-spec :family "Noto Color Emoji"))

I thought they would be picked automatically instead of having to state
every range.   That said, having fonts-noto-color-emoji installed
doesn't make the second symbol to show up.

-- 
Alberto



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 14:42             ` Eric S Fraga
  2021-09-02 14:52               ` Alberto Luaces
@ 2021-09-02 15:37               ` Uwe Brauer
  2021-09-02 15:42                 ` Eric S Fraga
  1 sibling, 1 reply; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02 15:37 UTC (permalink / raw)
  To: ding



>>> "ESF" == Eric S Fraga <e.fraga@ucl.ac.uk> writes:

> On Thursday,  2 Sep 2021 at 16:17, Uwe Brauer wrote:
>> I just realized that some fail, for example 
>> SMILING FACE WITH SMILING EYES AND HAND COVERING MOUTH gives 01F92D a
>> sort of square 🤭

> This works for me as does 🥲.

> The key is the fonts you have available for displaying the emojis.

> I have the following line in my init files:

> (set-fontset-font t '(#x1f300 . #x1fad0) (font-spec :family "Noto Color Emoji"))
  
> and obviously have the Noto font set installed (specifically the
> fonts-noto-color-emoji package in Debian).  There probably are many
> other choices for fonts for displaying emojis.

Thanks, well that package is not in Ubuntu 16.04 but in 20.04 and I
know, I should upgrade 😇, but...

So I just tried out to download the NotoColorEmoji.ttf
from https://github.com/googlefonts/noto-emoji

But that seems not enough, most likely some png should be generated, but
I think right now, I will not try that out, it seems more sensible to
upgrade ubuntu.

Uwe 



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 15:37               ` Uwe Brauer
@ 2021-09-02 15:42                 ` Eric S Fraga
  2021-09-02 17:03                   ` Uwe Brauer
  0 siblings, 1 reply; 22+ messages in thread
From: Eric S Fraga @ 2021-09-02 15:42 UTC (permalink / raw)
  To: ding

On Thursday,  2 Sep 2021 at 17:37, Uwe Brauer wrote:
> Thanks, well that package is not in Ubuntu 16.04 but in 20.04 and I
> know, I should upgrade 😇, but...

I understand your hesitation to upgrade.  I'm the same.

I'm sure ubuntu must have a font set that includes emojis.  Maybe
somebody else here can chime in or ask on the ubuntu forums?

-- 
Eric S Fraga via Emacs 28.0.50 & org 9.4.6 on Debian 11.0



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 15:42                 ` Eric S Fraga
@ 2021-09-02 17:03                   ` Uwe Brauer
  2021-09-02 18:14                     ` Adam Sjøgren
  0 siblings, 1 reply; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02 17:03 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 816 bytes --]

>>> "ESF" == Eric S Fraga <e.fraga@ucl.ac.uk> writes:

> On Thursday,  2 Sep 2021 at 17:37, Uwe Brauer wrote:
>> Thanks, well that package is not in Ubuntu 16.04 but in 20.04 and I
>> know, I should upgrade 😇, but...

> I understand your hesitation to upgrade.  I'm the same.

Just thinking of what I need later to fine tune, makes me shudder.


> I'm sure ubuntu must have a font set that includes emojis.  Maybe
> somebody else here can chime in or ask on the ubuntu forums?

The funny thing is I copied NotoColorEmoji.ttf into 
/usr/share/fonts/truetype/noto

And run, as I always do 
sudo fc-cache -f

However sudo fc-list | grep Emoji
/usr/share/fonts/truetype/noto/NotoEmoji-Regular.ttf: Noto Emoji:style=Regular

So the NotoColorEmji.ttf is somehow not found by the system 🥲



[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 17:03                   ` Uwe Brauer
@ 2021-09-02 18:14                     ` Adam Sjøgren
  2021-09-02 19:09                       ` Uwe Brauer
  2021-09-02 19:38                       ` [MacOS even worse] (was: smileys auto smileys) Uwe Brauer
  0 siblings, 2 replies; 22+ messages in thread
From: Adam Sjøgren @ 2021-09-02 18:14 UTC (permalink / raw)
  To: ding

Uwe writes:

> So the NotoColorEmji.ttf is somehow not found by the system 🥲

Try putting the file in ~/.fonts/ - that works for me.

I have this in my ~/.emacs/init.el:

  ;; Emoji: 😄, 🤦, 🏴󠁧󠁢󠁳󠁣󠁴󠁿, 🙂, 😉, 😃
  (set-fontset-font t 'symbol "Noto Color Emoji" nil 'append)
  (set-fontset-font t 'symbol "Symbola" nil 'append)


  Best regards,

    Adam

-- 
 "You know, if the sun was an oboe, what would you          Adam Sjøgren
  do?"                                                 asjo@koldfront.dk



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 18:14                     ` Adam Sjøgren
@ 2021-09-02 19:09                       ` Uwe Brauer
  2021-09-02 19:38                       ` [MacOS even worse] (was: smileys auto smileys) Uwe Brauer
  1 sibling, 0 replies; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02 19:09 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 587 bytes --]

>>> "AS" == Adam Sjøgren <asjo@koldfront.dk> writes:

> Uwe writes:
>> So the NotoColorEmji.ttf is somehow not found by the system 🥲

> Try putting the file in ~/.fonts/ - that works for me.

I tried it as well, no difference, font seems not found by the system

> I have this in my ~/.emacs/init.el:

>   ;; Emoji: 😄, 🤦, 🏴󠁧󠁢󠁳󠁣󠁴󠁿, 🙂, 😉, 😃
>   (set-fontset-font t 'symbol "Noto Color Emoji" nil 'append)
>   (set-fontset-font t 'symbol "Symbola" nil 'append)

Ok I have symbola installed

But I still cannot see 🥲 as I should 

[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 14:49             ` smileys auto smileys Alberto Luaces
@ 2021-09-02 19:10               ` Uwe Brauer
  2021-09-15 15:52                 ` Robert Pluim
  0 siblings, 1 reply; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02 19:10 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 675 bytes --]

>>> "AL" == Alberto Luaces <aluaces@udc.es> writes:

> Uwe Brauer <oub@mat.ucm.es> writes:
>> I just realized that some fail, for example 
>> SMILING FACE WITH SMILING EYES AND HAND COVERING MOUTH gives  01F92D a sort of square  🤭
>> and 
>> SMILING FACE WITH TEAR 01F872 
>> 
>> What do I miss here?

> I guess a capable font, because I can see your "hand covering mouth"
> emoji is displaying just fine.  My computer says it is using "symbola"
> for that.
Strange I have Symbola installed but I cannot see that symbol.

> The second is not available to me neither (🥲), I thought at least
> "fonts-noto" would cover them all.

Something is odd here

[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [MacOS even worse] (was: smileys auto smileys)
  2021-09-02 18:14                     ` Adam Sjøgren
  2021-09-02 19:09                       ` Uwe Brauer
@ 2021-09-02 19:38                       ` Uwe Brauer
  2021-09-02 20:49                         ` [PARTIALLY SOLVED] (was: [MacOS even worse]) Uwe Brauer
  1 sibling, 1 reply; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02 19:38 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 514 bytes --]

>>> "AS" == Adam Sjøgren <asjo@koldfront.dk> writes:

> Uwe writes:
>> So the NotoColorEmji.ttf is somehow not found by the system 🥲

> Try putting the file in ~/.fonts/ - that works for me.

> I have this in my ~/.emacs/init.el:

>   ;; Emoji: 😄, 🤦, 🏴󠁧󠁢󠁳󠁣󠁴󠁿, 🙂, 😉, 😃
>   (set-fontset-font t 'symbol "Noto Color Emoji" nil 'append)
>   (set-fontset-font t 'symbol "Symbola" nil 'append)

BTW, now emoji utf8 font is available on MacOS at least not for emacs28

[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PARTIALLY SOLVED] (was: [MacOS even worse])
  2021-09-02 19:38                       ` [MacOS even worse] (was: smileys auto smileys) Uwe Brauer
@ 2021-09-02 20:49                         ` Uwe Brauer
  0 siblings, 0 replies; 22+ messages in thread
From: Uwe Brauer @ 2021-09-02 20:49 UTC (permalink / raw)
  To: ding

[-- Attachment #1: Type: text/plain, Size: 699 bytes --]

>>> "UB" == Uwe Brauer <oub@mat.ucm.es> writes:

>>> "AS" == Adam Sjøgren <asjo@koldfront.dk> writes:
>> Uwe writes:
>>> So the NotoColorEmji.ttf is somehow not found by the system 🥲

>> Try putting the file in ~/.fonts/ - that works for me.

>> I have this in my ~/.emacs/init.el:

>> ;; Emoji: 😄, 🤦, 🏴󠁧󠁢󠁳󠁣󠁴󠁿, 🙂, 😉, 😃
>> (set-fontset-font t 'symbol "Noto Color Emoji" nil 'append)
>> (set-fontset-font t 'symbol "Symbola" nil 'append)
(set-fontset-font t 'symbol (font-spec :family "Apple Color Emoji") nil 'prepend)

Seems to work save the crying emoji, ah well

> BTW, now emoji utf8 font is available on MacOS at least not for emacs28


[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5673 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 14:52               ` Alberto Luaces
@ 2021-09-03 15:36                 ` Eric S Fraga
  0 siblings, 0 replies; 22+ messages in thread
From: Eric S Fraga @ 2021-09-03 15:36 UTC (permalink / raw)
  To: ding

On Thursday,  2 Sep 2021 at 16:52, Alberto Luaces wrote:
> Eric S Fraga <e.fraga@ucl.ac.uk> writes:
>
>> (set-fontset-font t '(#x1f300 . #x1fad0) (font-spec :family "Noto Color Emoji"))
>
> I thought they would be picked automatically instead of having to state
> every range.   

Could be.  I copied this from somewhere and it works so haven't
investigated further! ;-)

> That said, having fonts-noto-color-emoji installed doesn't make the
> second symbol to show up.

Strange.  Typing C-u C-x = on the character tells me (elided):

            character: 🥲 (displayed as 🥲) (codepoint 129394, #o374562, #x1f972)
              charset: unicode (Unicode (ISO10646))
code point in charset: 0x1F972
              display: by this font (glyph code)
    ftcrhb:-GOOG-Noto Color Emoji-normal-normal-normal-*-26-*-*-*-m-0-iso10646-1 (#x498)

-- 
Eric S Fraga via Emacs 28.0.50 & org 9.4.6 on Debian 11.0



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: smileys auto smileys
  2021-09-02 19:10               ` Uwe Brauer
@ 2021-09-15 15:52                 ` Robert Pluim
  0 siblings, 0 replies; 22+ messages in thread
From: Robert Pluim @ 2021-09-15 15:52 UTC (permalink / raw)
  To: ding

>>>>> On Thu, 02 Sep 2021 21:10:30 +0200, Uwe Brauer <oub@mat.ucm.es> said:

    >>>> "AL" == Alberto Luaces <aluaces@udc.es> writes:
    >> Uwe Brauer <oub@mat.ucm.es> writes:
    >>> I just realized that some fail, for example 
    >>> SMILING FACE WITH SMILING EYES AND HAND COVERING MOUTH gives  01F92D a sort of square  🤭
    >>> and 
    >>> SMILING FACE WITH TEAR 01F872 
    >>> 
    >>> What do I miss here?

    >> I guess a capable font, because I can see your "hand covering mouth"
    >> emoji is displaying just fine.  My computer says it is using "symbola"
    >> for that.
    Uwe> Strange I have Symbola installed but I cannot see that symbol.

    >> The second is not available to me neither (🥲), I thought at least
    >> "fonts-noto" would cover them all.

    Uwe> Something is odd here

If youʼre running Ubuntu 16.04, then I strongly suspect youʼre using
the Xft font backend (C-u C-x = on a character will show 'xft:' just
before the font name). Emacs with Xft refuses to use 'Noto Color
Emoji', because it causes crashes. (you can check the value of
'face-ignored-fonts')

Solution: upgrade to a system where you can build Emacs with the ftcr
backend, which is FreeType + Cairo, and then you can use Noto Color Emoji.

Robert
-- 


^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2021-09-15 19:24 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-01  7:10 smileys auto smileys Uwe Brauer
2021-09-01  7:22 ` Adam Sjøgren
2021-09-01  8:53   ` Uwe Brauer
2021-09-01 14:13     ` Adam Sjøgren
2021-09-02  7:21       ` Uwe Brauer
2021-09-02  7:54         ` Adam Sjøgren
2021-09-02 12:25         ` Eric S Fraga
2021-09-02 14:06           ` Uwe Brauer
2021-09-02 14:17           ` Uwe Brauer
2021-09-02 14:42             ` Eric S Fraga
2021-09-02 14:52               ` Alberto Luaces
2021-09-03 15:36                 ` Eric S Fraga
2021-09-02 15:37               ` Uwe Brauer
2021-09-02 15:42                 ` Eric S Fraga
2021-09-02 17:03                   ` Uwe Brauer
2021-09-02 18:14                     ` Adam Sjøgren
2021-09-02 19:09                       ` Uwe Brauer
2021-09-02 19:38                       ` [MacOS even worse] (was: smileys auto smileys) Uwe Brauer
2021-09-02 20:49                         ` [PARTIALLY SOLVED] (was: [MacOS even worse]) Uwe Brauer
2021-09-02 14:49             ` smileys auto smileys Alberto Luaces
2021-09-02 19:10               ` Uwe Brauer
2021-09-15 15:52                 ` Robert Pluim

Gnus development mailing list

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.vuxu.org/ding

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V1 ding ding/ https://inbox.vuxu.org/ding \
		ding@inbox.vuxu.org
	public-inbox-index ding

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.vuxu.org/vuxu.archive.emacs.gnus.general


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git