* SPC doesn't work in tty gnus on XEmacs 21.2.42
@ 2001-02-01 2:10 Nevin Kapur
2001-02-08 14:13 ` Kai Großjohann
0 siblings, 1 reply; 10+ messages in thread
From: Nevin Kapur @ 2001-02-01 2:10 UTC (permalink / raw)
I just started playing with XEmacs 21.2.42. I usually run gnuserv on a
my machine in school and then read gnus with gnuclient -nw. This
problem only occurs when I use gnus on a tty. The SPC key in the
*Summary* buffer does not work, i.e., if there is more than a
screenful of *Article*, SPC does not move page down. Neither does it
to the next article when one goes past the end of an *Article*. I've
been using 'C-M-v' and 'n' to navigate. Has anyone else seen this?
--
Nevin
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-01 2:10 SPC doesn't work in tty gnus on XEmacs 21.2.42 Nevin Kapur
@ 2001-02-08 14:13 ` Kai Großjohann
2001-02-08 14:33 ` Nevin Kapur
0 siblings, 1 reply; 10+ messages in thread
From: Kai Großjohann @ 2001-02-08 14:13 UTC (permalink / raw)
Cc: ding
I wonder if in this setup the *Article* buffer is displayed in two
windows, one on your tty and one on the XEmacs at school. Maybe that
confuses XEmacs.
Does it help to kill the *Article* buffer?
kai
--
Be indiscrete. Do it continuously.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-08 14:13 ` Kai Großjohann
@ 2001-02-08 14:33 ` Nevin Kapur
2001-02-08 15:03 ` Kai Großjohann
0 siblings, 1 reply; 10+ messages in thread
From: Nevin Kapur @ 2001-02-08 14:33 UTC (permalink / raw)
Cc: Kai Großjohann
On Thu, 08 Feb 2001, Kai Großjohann wrote:
> I wonder if in this setup the *Article* buffer is displayed in two
> windows, one on your tty and one on the XEmacs at school. Maybe that
> confuses XEmacs.
>
> Does it help to kill the *Article* buffer?
I've tried quitting Gnus on the school XEmacs, and restarting on the
tty gnuclient. That doesn't help. I've never tried killing the
*Article* buffer. (Does quitting Gnus do that?) The problem is I don't
know how to reproduce this, though I see it often enough to tear my
hair out. This is peculiar to Oort and the beta Xemacsen that I've been
using. It never happened with 5.8.8 and XEmacs 21.1.12.
--
Nevin
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-08 14:33 ` Nevin Kapur
@ 2001-02-08 15:03 ` Kai Großjohann
2001-02-08 15:17 ` ShengHuo ZHU
0 siblings, 1 reply; 10+ messages in thread
From: Kai Großjohann @ 2001-02-08 15:03 UTC (permalink / raw)
Cc: ding
Quitting Gnus kills all the buffers, AFAIK.
If it didn't happen in 5.8.8 but happens in ognus, that smells of a
bug in Oort.
ShengHuo?
kai
--
Be indiscrete. Do it continuously.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-08 15:03 ` Kai Großjohann
@ 2001-02-08 15:17 ` ShengHuo ZHU
2001-02-08 15:36 ` Nevin Kapur
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: ShengHuo ZHU @ 2001-02-08 15:17 UTC (permalink / raw)
Kai.Grossjohann@CS.Uni-Dortmund.DE (Kai Großjohann) writes:
> Quitting Gnus kills all the buffers, AFAIK.
> If it didn't happen in 5.8.8 but happens in ognus, that smells of a
> bug in Oort.
>
> ShengHuo?
Unfortunately, I can not reproduce it (Oort in Poseidon tty). Maybe,
"C-h C-k SPC" and "M-: (frame-list) RET" can tell some stories.
ShengHuo
--
(setq gnus-posting-styles
'((".*" (signature (format "(setq gnus-posting-styles
'%S)" gnus-posting-styles)))))
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-08 15:17 ` ShengHuo ZHU
@ 2001-02-08 15:36 ` Nevin Kapur
2001-02-09 3:55 ` Nevin Kapur
2001-02-11 3:08 ` Nevin Kapur
2 siblings, 0 replies; 10+ messages in thread
From: Nevin Kapur @ 2001-02-08 15:36 UTC (permalink / raw)
On Thu, 08 Feb 2001, ShengHuo ZHU wrote:
> Kai.Grossjohann@CS.Uni-Dortmund.DE (Kai Großjohann) writes:
>
>> Quitting Gnus kills all the buffers, AFAIK.
>> If it didn't happen in 5.8.8 but happens in ognus, that smells of a
>> bug in Oort.
>>
>> ShengHuo?
>
> Unfortunately, I can not reproduce it (Oort in Poseidon tty). Maybe,
> "C-h C-k SPC" and "M-: (frame-list) RET" can tell some stories.
Well, I can't either. "C-h C-k SPC" does the right thing, i.e. it runs
'gnus-summary-next-page'. I'll try the other suggestion the next time
it happens.
Thanks.
--
Nevin
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-08 15:17 ` ShengHuo ZHU
2001-02-08 15:36 ` Nevin Kapur
@ 2001-02-09 3:55 ` Nevin Kapur
2001-02-11 3:08 ` Nevin Kapur
2 siblings, 0 replies; 10+ messages in thread
From: Nevin Kapur @ 2001-02-09 3:55 UTC (permalink / raw)
On Thu, 08 Feb 2001, ShengHuo ZHU wrote:
> Unfortunately, I can not reproduce it (Oort in Poseidon tty). Maybe,
> "C-h C-k SPC" and "M-: (frame-list) RET" can tell some stories.
It's happening right now. 'C-h C-k SPC' returns
'gnus-summary-next-page', and M-: (frame-list)
(#<x-frame "emacs" 0xb602> #<x-frame "emacs" 0x5e04> #<x-frame "emacs" 0x208e> #<tty-frame "emacs" 0x2245d>)
I'm not sure how to interpret this. BTW, I am positing from 21.2.43.
--
Nevin
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-08 15:17 ` ShengHuo ZHU
2001-02-08 15:36 ` Nevin Kapur
2001-02-09 3:55 ` Nevin Kapur
@ 2001-02-11 3:08 ` Nevin Kapur
2001-02-13 4:37 ` ShengHuo ZHU
2001-02-13 15:57 ` Chris Green
2 siblings, 2 replies; 10+ messages in thread
From: Nevin Kapur @ 2001-02-11 3:08 UTC (permalink / raw)
[Problems with SPC in the *Summary* buffer.]
On Thu, 08 Feb 2001, ShengHuo ZHU wrote:
> Unfortunately, I can not reproduce it (Oort in Poseidon tty). Maybe,
> "C-h C-k SPC" and "M-: (frame-list) RET" can tell some stories.
Here's an update. I switched to XEmacs 21.1.12 with the latest Oort.
No problems now, for 2 days. Unfortunately, 21.1.13/14 crash when
quitting the *Summary* buffer on a tty gnuclient (I've reported this
bug.) and the betas have this SPC problem. This doesn't bode well. I
wish I had the savvy to debug this.
--
Nevin
:)
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-11 3:08 ` Nevin Kapur
@ 2001-02-13 4:37 ` ShengHuo ZHU
2001-02-13 15:57 ` Chris Green
1 sibling, 0 replies; 10+ messages in thread
From: ShengHuo ZHU @ 2001-02-13 4:37 UTC (permalink / raw)
Nevin Kapur <nevin@jhu.edu> writes:
> [Problems with SPC in the *Summary* buffer.]
>
> On Thu, 08 Feb 2001, ShengHuo ZHU wrote:
>
> > Unfortunately, I can not reproduce it (Oort in Poseidon tty). Maybe,
> > "C-h C-k SPC" and "M-: (frame-list) RET" can tell some stories.
>
> Here's an update. I switched to XEmacs 21.1.12 with the latest Oort.
> No problems now, for 2 days. Unfortunately, 21.1.13/14 crash when
> quitting the *Summary* buffer on a tty gnuclient (I've reported this
> bug.) and the betas have this SPC problem. This doesn't bode well. I
> wish I had the savvy to debug this.
Try this command in the summary buffer with this SPC problem.
"M-: (eq (window-frame (get-buffer-window gnus-article-buffer t))
(selected-frame)) RET"
If it returns nil, it means that SPC is scrolling the article buffer
in another frame.
ShengHuo
--
(setq gnus-posting-styles
'((".*" (signature (format "(setq gnus-posting-styles
'%S)" gnus-posting-styles)))))
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SPC doesn't work in tty gnus on XEmacs 21.2.42
2001-02-11 3:08 ` Nevin Kapur
2001-02-13 4:37 ` ShengHuo ZHU
@ 2001-02-13 15:57 ` Chris Green
1 sibling, 0 replies; 10+ messages in thread
From: Chris Green @ 2001-02-13 15:57 UTC (permalink / raw)
Nevin Kapur <nevin@jhu.edu> writes:
> [Problems with SPC in the *Summary* buffer.]
>
> On Thu, 08 Feb 2001, ShengHuo ZHU wrote:
>
> > Unfortunately, I can not reproduce it (Oort in Poseidon tty). Maybe,
> > "C-h C-k SPC" and "M-: (frame-list) RET" can tell some stories.
>
> Here's an update. I switched to XEmacs 21.1.12 with the latest Oort.
> No problems now, for 2 days. Unfortunately, 21.1.13/14 crash when
> quitting the *Summary* buffer on a tty gnuclient (I've reported this
> bug.) and the betas have this SPC problem. This doesn't bode well. I
I would guess this is the same bug I'm having with an X11 Gnuclient
quitting the *Summary* Buffer as well except the crash is an infinite
loop.
--
Chris Green <cmg@uab.edu>
I've had a perfectly wonderful evening. But this wasn't it.
-- Groucho Marx
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2001-02-13 15:57 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-02-01 2:10 SPC doesn't work in tty gnus on XEmacs 21.2.42 Nevin Kapur
2001-02-08 14:13 ` Kai Großjohann
2001-02-08 14:33 ` Nevin Kapur
2001-02-08 15:03 ` Kai Großjohann
2001-02-08 15:17 ` ShengHuo ZHU
2001-02-08 15:36 ` Nevin Kapur
2001-02-09 3:55 ` Nevin Kapur
2001-02-11 3:08 ` Nevin Kapur
2001-02-13 4:37 ` ShengHuo ZHU
2001-02-13 15:57 ` Chris Green
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).