How to read utf-8 mails?

How to read utf-8 mails?

[Jinhyok Heo]

Can I read utf-8 mails with Gnus?
For now I use cvs gnus, and utf-8 mails are all Greek to me.

-- 
|  Jinhyok Heo (novembre @ournature.org || http://ournature.org/~novembre/)
|--------------------------------------------------------------------------
| "We are still reaching for the sky. In the developed countries people
|  are coming back down, saying, `It's empty up there.'" --- a Ladakhi monk

Re: How to read utf-8 mails?

[Frank Schmitt]

Jinhyok Heo <novembreN0$PAM@ournature.org> writes:

>Can I read utf-8 mails with Gnus?
>For now I use cvs gnus, and utf-8 mails are all Greek to me.

You must have a unicode enabled Emacs. For that you could try Emacs 21
(perhaps together with mule-ucs), or the ucs-conv package for XEmacs.

Perhaps you'd like to try the xemacs21.5 beta branch called ben-mule, it
has native unicode support.

-- 
One Ring to rule them all, One Ring to find them,
One Ring to bring them all and in the darkness bind them
In the Land of Mordor where the Shadows lie.
19. Dezember 2001

Re: How to read utf-8 mails?

[Kai Großjohann]

Jinhyok Heo <novembreN0$PAM@ournature.org> writes:

> Can I read utf-8 mails with Gnus?
> For now I use cvs gnus, and utf-8 mails are all Greek to me.

Gnus can do UTF-8 if Emacs can.  I think for XEmacs you can use
recent versions of Mule-UCS, or maybe a package called ucsconv.  But
I don't use XEmacs, so I'm not sure.

kai
-- 
Simplification good!  Oversimplification bad!  (Larry Wall)

Re: How to read utf-8 mails?

[Daniel Pittman]

On Tue, 04 Dec 2001, Kai Großjohann wrote:
> Jinhyok Heo <novembreN0$PAM@ournature.org> writes:
> 
>> Can I read utf-8 mails with Gnus?
>> For now I use cvs gnus, and utf-8 mails are all Greek to me.
> 
> Gnus can do UTF-8 if Emacs can.  I think for XEmacs you can use
> recent versions of Mule-UCS, or maybe a package called ucsconv.  But
> I don't use XEmacs, so I'm not sure.

This is correct: I use the Mule-UCS package with a recent XEmacs and it
works just fine for reading UTF-8 mail.

        Daniel

-- 
A cathedral, a wave of a storm, a dancer's leap,
never turn out to be as high as we had hoped.
        -- Marcel Proust

Re: How to read utf-8 mails?

[Jinhyok Heo]

>>>>> "DP" == Daniel Pittman <daniel@rimspace.net> writes:

    DP> This is correct: I use the Mule-UCS package with a recent XEmacs and it
    DP> works just fine for reading UTF-8 mail.

I've just installed Mule-UCS-0.84 with XEmacs-21.4.5. And it's working
well. :-)

Thanks,

-- 
|  Jinhyok Heo (novembre @ournature.org || http://ournature.org/~novembre/)
|--------------------------------------------------------------------------
| "We are still reaching for the sky. In the developed countries people
|  are coming back down, saying, `It's empty up there.'" --- a Ladakhi monk

Re: How to read utf-8 mails?

[Daniel Pittman]

On Wed, 05 Dec 2001, Jinhyok Heo wrote:
>>>>>> "DP" == Daniel Pittman <daniel@rimspace.net> writes:
> 
>     DP> This is correct: I use the Mule-UCS package with a recent
>     DP> XEmacs and it works just fine for reading UTF-8 mail.
> 
> I've just installed Mule-UCS-0.84 with XEmacs-21.4.5. And it's working
> well. :-)

The one point to note is that you must have Mule-UCS loaded *before* you
start or load Gnus. I am not sure exactly when it looks for the coding
system but if you load Mule-UCS later then Gnus is unaware of it's
presence...

        Daniel

-- 
Good teaching in our schools leads to risk taking.
        -- Prof. Jacob Neusner, commencement address, 1991

Re: How to read utf-8 mails?

[Vincent Bernat]

OoO En ce milieu de nuit étoilée du mercredi 05 décembre 2001, vers
03:50, Jinhyok Heo <novembreN0$PAM@ournature.org> disait:

DP> This is correct: I use the Mule-UCS package with a recent XEmacs and it
DP> works just fine for reading UTF-8 mail.

> I've just installed Mule-UCS-0.84 with XEmacs-21.4.5. And it's
> working well. :-)

Where did you find it ?

Re: How to read utf-8 mails?

[Kai Großjohann]

Vincent Bernat <bernat@scientist.com> writes:

> OoO En ce milieu de nuit étoilée du mercredi 05 décembre 2001, vers
> 03:50, Jinhyok Heo <novembreN0$PAM@ournature.org> disait:
>
> DP> This is correct: I use the Mule-UCS package with a recent XEmacs and it
> DP> works just fine for reading UTF-8 mail.
>
>> I've just installed Mule-UCS-0.84 with XEmacs-21.4.5. And it's
>> working well. :-)
>
> Where did you find it ?

Enter "mule-ucs" in Google.  Google is your friend.

kai
-- 
Simplification good!  Oversimplification bad!  (Larry Wall)

Re: How to read utf-8 mails?

[Vincent Bernat]

OoO En cette nuit striée d'éclairs du mercredi 05 décembre 2001, vers
02:14, Daniel Pittman <daniel@rimspace.net> disait:

> This is correct: I use the Mule-UCS package with a recent XEmacs and it
> works just fine for reading UTF-8 mail.

Do I have to install XEmacs-Mule or a plain XEmacs with mule-base is
OK ? I have just installed mule-base package and there is no change.
-- 
BOFH excuse #160:
non-redundant fan failure

Re: How to read utf-8 mails?

[Daniel Pittman]

On Wed, 05 Dec 2001, Vincent Bernat wrote:
> OoO En cette nuit striée d'éclairs du mercredi 05 décembre 2001, vers
> 02:14, Daniel Pittman <daniel@rimspace.net> disait:
> 
>> This is correct: I use the Mule-UCS package with a recent XEmacs and
>> it works just fine for reading UTF-8 mail.
> 
> Do I have to install XEmacs-Mule or a plain XEmacs with mule-base is
> OK ? I have just installed mule-base package and there is no change.

You need an XEmacs compiled with MULE, the mule-base package *and* the
additional MULE-UCS package, which is not part of the XEmacs package
system, but is available on the 'net.

Kai suggests google; that was how I found it. :)
        Daniel

-- 
I have a vision, and in that vision I'm standing on top of a building.
God asks me 'Why do you love your Father?', and I say 'I do not know,
Lord.'  He offers me absolution and I thank him, and the shots ring out
into the crowds below.
        -- D.J. Babb