From: Kai.Grossjohann@CS.Uni-Dortmund.DE (Kai Großjohann)
Cc: ding@gnus.org
Subject: Re: `user-mail-address' for message-ids
Date: 27 Feb 2001 18:49:49 +0100 [thread overview]
Message-ID: <vafwvacow1u.fsf@lucy.cs.uni-dortmund.de> (raw)
In-Reply-To: <puiwvacnivm.fsf@cyan.acl.lanl.gov> ("Jason R. Mastaler"'s message of "27 Feb 2001 10:19:41 -0700")
On 27 Feb 2001, Jason R. Mastaler wrote:
> Per Abrahamsen <abraham@dina.kvl.dk> writes:
>
>> Yes. It would increase the risk of duplicate message ids, i.e. all
>> the users of all the machines in our department share the
>> 'dina.kvl.dk' mail host name, but I'm the only one using ssv2.
>
> By this argument, using (system-name) for the message-id doesn't
> insure uniqueness. In your case you are the only one using ssv2,
> but consider large multiuser servers where hundreds of gnus users
> may be using the same machine.
The lhs should be unique on that host, and the rhs should uniquely
identify the host. Gnus should make sure that the lhs is unique even
if several people use the same machine.
kai
--
Be indiscrete. Do it continuously.
next prev parent reply other threads:[~2001-02-27 17:49 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-23 20:30 Jason R Mastaler
2001-02-23 21:00 ` Paul Jarc
2001-02-23 21:38 ` Kai Großjohann
2001-02-23 21:47 ` Paul Jarc
2001-02-23 22:30 ` Kai Großjohann
2001-02-23 22:26 ` Jason R. Mastaler
2001-02-23 22:41 ` Paul Jarc
2001-02-23 22:57 ` Jason R. Mastaler
2001-02-23 23:27 ` Paul Jarc
2001-02-23 23:33 ` Jason R. Mastaler
2001-02-24 12:08 ` Kai Großjohann
2001-02-24 16:30 ` Simon Josefsson
2001-02-25 15:13 ` ShengHuo ZHU
2001-02-25 17:47 ` Alan Shutko
2001-02-28 0:09 ` why `system-name' is bad for Message-IDs (was Re: `user-mail-address' for message-ids) Jason R. Mastaler
2001-02-28 0:44 ` Paul Jarc
2001-02-28 1:02 ` Jason R. Mastaler
2001-02-28 1:10 ` Paul Jarc
2001-02-28 1:24 ` Jason R. Mastaler
2001-02-28 14:52 ` Paul Jarc
2001-02-28 1:08 ` Florian Weimer
2001-02-28 1:25 ` Jason R. Mastaler
2001-02-28 2:52 ` Florian Weimer
2001-02-28 14:32 ` Alan Shutko
2001-02-28 15:23 ` Kai Großjohann
2001-02-25 19:46 ` `user-mail-address' for message-ids Paul Jarc
2001-02-27 17:28 ` Jason R. Mastaler
2001-02-27 17:47 ` Kai Großjohann
2001-02-27 17:55 ` Jason R. Mastaler
2001-02-27 18:12 ` Per Abrahamsen
2001-02-27 22:13 ` Jason R. Mastaler
2001-02-27 22:58 ` Kai Großjohann
2001-02-27 23:13 ` Jason R. Mastaler
2001-02-28 0:43 ` Paul Jarc
2001-02-28 1:06 ` Jason R. Mastaler
2001-02-28 1:15 ` Paul Jarc
2001-02-28 3:01 ` Florian Weimer
2001-02-28 11:15 ` Per Abrahamsen
2001-02-28 12:44 ` Florian Weimer
2001-02-28 16:12 ` Jason R. Mastaler
2001-02-28 17:19 ` Florian Weimer
2001-02-28 17:20 ` Paul Jarc
2001-02-28 20:04 ` Kai Großjohann
2001-02-28 16:01 ` Jason R. Mastaler
2001-02-28 6:31 ` Christoph Conrad
2001-02-28 15:31 ` Kai Großjohann
2001-02-28 15:55 ` Norbert Koch
2001-02-28 21:09 ` NAGY Andras
2001-02-28 15:45 ` Toby Speight
2001-02-28 15:48 ` Toby Speight
2001-02-27 18:18 ` Kai Großjohann
2001-02-27 21:44 ` Jason R. Mastaler
2001-02-27 21:54 ` Paul Jarc
2001-02-27 22:47 ` Kai Großjohann
2001-02-28 15:43 ` Toby Speight
2001-02-27 17:52 ` Per Abrahamsen
2001-02-27 18:00 ` Jason R. Mastaler
2001-02-27 18:08 ` Per Abrahamsen
2001-02-27 18:04 ` Jason R. Mastaler
2001-02-27 18:21 ` Kai Großjohann
2001-02-27 21:35 ` Jason R. Mastaler
2001-02-27 21:41 ` Paul Jarc
2001-02-27 21:47 ` Jason R. Mastaler
2001-02-27 22:00 ` Paul Jarc
2001-02-27 21:56 ` Kai Großjohann
2001-02-27 22:04 ` Jason R. Mastaler
2001-02-27 22:14 ` Paul Jarc
2001-02-27 23:51 ` Jason R. Mastaler
2001-02-28 0:54 ` Lloyd Zusman
2001-02-27 18:26 ` Per Abrahamsen
2001-02-27 21:38 ` Jason R. Mastaler
2001-02-27 21:59 ` Kai Großjohann
2001-02-27 22:29 ` Florian Weimer
2001-02-27 23:58 ` Jason R. Mastaler
2001-02-28 1:05 ` Florian Weimer
2001-02-28 1:19 ` Jason R. Mastaler
2001-02-28 2:56 ` Florian Weimer
2001-02-28 15:36 ` Kai Großjohann
2001-02-28 16:04 ` Florian Weimer
2001-02-28 16:08 ` Jason R. Mastaler
2001-02-28 16:02 ` Jason R. Mastaler
2001-02-25 2:05 ` NAGY Andras
2001-02-24 12:10 ` Kai Großjohann
2001-02-25 13:36 ` Per Abrahamsen
2001-02-25 21:00 ` Denys Duchier
2001-02-26 9:35 ` Sender again again (was: Re: `user-mail-address' for message-ids) Per Abrahamsen
2001-02-26 10:53 ` Florian Weimer
2001-02-26 15:43 ` Simon Josefsson
2001-02-26 16:43 ` Florian Weimer
2001-02-26 16:45 ` Cancel-Locks (was: Re: Sender again again (was: Re: `user-mail-address' for message-ids)) Per Abrahamsen
2001-02-26 17:23 ` Cancel-Locks Florian Weimer
2001-02-26 17:40 ` Cancel-Locks Per Abrahamsen
2001-02-27 17:19 ` `user-mail-address' for message-ids Jason R. Mastaler
2001-02-27 17:28 ` Paul Jarc
2001-02-27 17:36 ` Jason R. Mastaler
2001-02-27 17:52 ` Kai Großjohann
2001-02-27 19:05 ` Simon Josefsson
2001-02-27 22:01 ` Kai Großjohann
2001-02-27 22:08 ` Paul Jarc
2001-02-27 23:03 ` Kai Großjohann
2001-02-28 0:31 ` Paul Jarc
2001-02-28 15:38 ` Kai Großjohann
2001-02-27 22:49 ` Samuel Padgett
2001-02-28 15:39 ` Kai Großjohann
2001-03-01 0:38 ` Samuel Padgett
2001-02-28 11:31 ` Per Abrahamsen
2001-02-28 15:48 ` Kai Großjohann
2001-02-27 17:48 ` Per Abrahamsen
2001-02-27 17:49 ` Kai Großjohann [this message]
2001-02-27 17:57 ` Jason R. Mastaler
2001-02-27 18:18 ` Per Abrahamsen
2001-02-27 18:22 ` Kai Großjohann
2001-02-27 19:15 ` Paul Jarc
2001-02-27 22:04 ` Kai Großjohann
2001-02-28 8:24 ` Paul Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=vafwvacow1u.fsf@lucy.cs.uni-dortmund.de \
--to=kai.grossjohann@cs.uni-dortmund.de \
--cc=ding@gnus.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).