From: Haines Brown <haines@engels.histomat.net>
To: info-gnus-english@gnu.org
Subject: sound distortion
Date: Sun, 15 Feb 2015 14:59:30 -0500 [thread overview]
Message-ID: <87sie7rlnh.fsf@engels.histomat.net> (raw)
I installed on Debian Wheezy (3.2.0-4-686-pae #1 SMP Debian
3.2.65-1 i686 GNU/Linux) an Asus Xonar DS PCI Express 7.1. It
played beautifully out of the box, but next day it played with
much distortion. I believe the only thing I did after the initial
success was to remove a line in /etc/modprobe.d/alsa/alsa-base.config
with which I tried to
correct an old card priority problem.
Sound is hopeless distorted. When I play a CD disk with
alsaplayer the sound stutters: sometimes sound amplitude seems
modulated by a sinewave at about 8Hz/sec and sometimes it
stutters or is silent. What I find significant is that when
alsaplayer is stopped, the stuttering continues for a second or
two longer. Does this suggest feedback?
When I play a .wav file with aplay, the sound is a screech. I
installed pulseaudio and it produced no sound at all and so
removed it. Nevertheless pulse shows up:
$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default:CARD=DX
Xonar DX, Multichannel
Default Audio Device
sysdefault:CARD=DX
Xonar DX, Multichannel
Default Audio Device
front:CARD=DX,DEV=0
Xonar DX, Multichannel
Front speakers
...
The driver for the card is snd_virtuoso:
# lspci -v
06:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 \
[Oxygen HD Audio]
Subsystem: ASUSTeK Computer Inc. Virtuoso 100 (Xonar DX)
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at d000 [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_virtuoso
Nothing about the card or driver loading is reported by $
dmesg. This perhaps because its earlier portion was overwritten
by subsequent garbage, multiple repititions of:
sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
ILI
sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track
sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
end_request: I/O error, dev sr0, sector 0
sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
However, that garbage ended and for a day I've not seen any more of it.
So in place of dmesg I turn to /var/log/boot. A | grep snd returns:
Thu Feb 12 14:23:18 2015: Loading kernel module snd-ctxfi.
This is strange. Last week I tried to install an Audigi X-Fi
Titanium before I relized it is not supported by Debian. This
snd-ctxfi sounds like its module is loaded for some reason.
# lsmod
...
snd_ctxfi 62598 0
...
snd_hda_codec_hdmi 26352 1
snd_virtuoso 33765 2
snd_oxygen_lib 27905 1 snd_virtuoso
snd_mpu401_uart 13299 1 snd_oxygen_lib
snd_usb_audio 71436 0
snd_usbmidi_lib 18801 1 snd_usb_audio
snd_seq_midi 12744 0
snd_seq_midi_event 13124 1 snd_seq_midi
snd_rawmidi 22472 3 \
snd_seq_midi,snd_usbmidi_lib,snd_mpu401_uart
...
snd_hda_intel 21786 1
snd_hda_codec 63477 2 snd_hda_intel,snd_hda_codec_hdmi
...
snd_hwdep 12943 2 snd_hda_codec,snd_usb_audio
snd_pcm 53461 7 \
snd_hda_codec,snd_hda_intel,snd_usb_audio,\
snd_oxygen_lib,snd_hda_codec_hdmi,snd_ctxfi
...
snd_page_alloc 12867 3 snd_pcm,snd_hda_intel,snd_ctxfi
...
snd_seq 39512 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 13016 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer
...
snd 42761 19
snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_hda_codec,\
snd_hda_intel,snd_rawmidi,snd_usbmidi_lib,snd_usb_audio, \
snd_mpu401_uart,snd_oxygen_lib,snd_virtuoso,snd_hda_codec_hdmi,\
snd_ctxfi
Don't know if this could be a problem, so unloaded it and
restarted alsa-utils. That had no effect on the problem.
next reply other threads:[~2015-02-15 19:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-15 19:59 Haines Brown [this message]
2015-02-16 3:35 ` Lars Ingebrigtsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87sie7rlnh.fsf@engels.histomat.net \
--to=haines@engels.histomat.net \
--cc=info-gnus-english@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).