From: schwarze@mdocml.bsd.lv
To: source@mdocml.bsd.lv
Subject: mdocml: Drop support for building without SQLite.
Date: Tue, 21 Feb 2017 12:04:35 -0500 (EST) [thread overview]
Message-ID: <8725228931891341224.enqueue@fantadrom.bsd.lv> (raw)
Log Message:
-----------
Drop support for building without SQLite.
There whole point of the 1.13 branch is SQLite support after all.
Tags:
----
VERSION_1_13
Modified Files:
--------------
mdocml:
INSTALL
Makefile
configure
configure.local.example
main.c
Revision Data
-------------
Index: INSTALL
===================================================================
RCS file: /home/cvs/mdocml/mdocml/INSTALL,v
retrieving revision 1.15.2.1
retrieving revision 1.15.2.2
diff -LINSTALL -LINSTALL -u -p -r1.15.2.1 -r1.15.2.2
--- INSTALL
+++ INSTALL
@@ -66,11 +66,10 @@ Otherwise, if your system uses man.conf(
a "manpath" line for each directory tree, and the order of these
lines meets your wishes.
-7. If you compiled with database support, run the command "sudo
-makewhatis" to build mandoc.db(5) databases in all the directory
-trees configured in step 6. Whenever installing new manual pages,
-re-run makewhatis(8) to update the databases, or apropos(1) will
-not find the new pages.
+7. Run the command "sudo makewhatis" to build mandoc.db(5) databases
+in all the directory trees configured in step 6. Whenever installing
+new manual pages, re-run makewhatis(8) to update the databases, or
+apropos(1) will not find the new pages.
8. To set up a man.cgi(8) server, read its manual page.
Index: Makefile
===================================================================
RCS file: /home/cvs/mdocml/mdocml/Makefile,v
retrieving revision 1.488.2.7
retrieving revision 1.488.2.8
diff -LMakefile -LMakefile -u -p -r1.488.2.7 -r1.488.2.8
--- Makefile
+++ Makefile
@@ -248,21 +248,18 @@ MANDOC_TERM_OBJS = eqn_term.o \
term_ps.o \
tbl_term.o
-BASE_OBJS = $(MANDOC_HTML_OBJS) \
+MAIN_OBJS = $(MANDOC_HTML_OBJS) \
$(MANDOC_MAN_OBJS) \
$(MANDOC_TERM_OBJS) \
main.o \
+ mandocdb.o \
manpath.o \
+ mansearch.o \
+ mansearch_const.o \
out.o \
tag.o \
tree.o
-MAIN_OBJS = $(BASE_OBJS)
-
-DB_OBJS = mandocdb.o \
- mansearch.o \
- mansearch_const.o
-
CGI_OBJS = $(MANDOC_HTML_OBJS) \
cgi.o \
mansearch.o \
@@ -341,7 +338,7 @@ distclean: clean
clean:
rm -f libmandoc.a $(LIBMANDOC_OBJS) $(COMPAT_OBJS)
- rm -f mandoc $(BASE_OBJS) $(DB_OBJS)
+ rm -f mandoc $(MAIN_OBJS)
rm -f man.cgi $(CGI_OBJS)
rm -f manpage $(MANPAGE_OBJS)
rm -f demandoc $(DEMANDOC_OBJS)
Index: configure
===================================================================
RCS file: /home/cvs/mdocml/mdocml/configure,v
retrieving revision 1.43.2.11
retrieving revision 1.43.2.12
diff -Lconfigure -Lconfigure -u -p -r1.43.2.11 -r1.43.2.12
--- configure
+++ configure
@@ -49,7 +49,6 @@ LD_OHASH=
LD_SQLITE3=
STATIC="-static"
-BUILD_DB=1
BUILD_CGI=0
HAVE_DIRENT_NAMLEN=
@@ -249,16 +248,7 @@ else
fi
# --- sqlite3 ---
-if [ ${BUILD_DB} -eq 0 ]; then
- echo "BUILD_DB=0 (manual)" 1>&2
- echo "BUILD_DB=0 (manual)" 1>&3
- echo 1>&3
- HAVE_SQLITE3=0
-elif ismanual sqlite3 SQLITE3 "${HAVE_SQLITE3}"; then
- if [ -z "${LD_SQLITE3}" ]; then
- LD_SQLITE3="-lsqlite3"
- fi
-elif [ -n "${LD_SQLITE3}" ]; then
+if [ -n "${LD_SQLITE3}" ]; then
runtest sqlite3 SQLITE3 "${LD_SQLITE3}" || true
elif singletest sqlite3 SQLITE3 "-lsqlite3"; then
LD_SQLITE3="-lsqlite3"
@@ -269,19 +259,14 @@ elif runtest sqlite3 SQLITE3 \
COMP="${COMP} -I/usr/local/include"
fi
if [ ${HAVE_SQLITE3} -eq 0 ]; then
- LD_SQLITE3=
- if [ ${BUILD_DB} -gt 0 ]; then
- echo "BUILD_DB=0 (no sqlite3)" 1>&2
- echo "BUILD_DB=0 (no sqlite3)" 1>&3
- echo 1>&3
- BUILD_DB=0
- fi
+ echo "FATAL: no sqlite3" 1>&2
+ echo "FATAL: no sqlite3" 1>&3
+ echo "Use release 1.14.1 to build without SQLite." 1>&2
+ exit 1
fi
# --- sqlite3_errstr ---
-if [ ${BUILD_DB} -eq 0 ]; then
- HAVE_SQLITE3_ERRSTR=1
-elif ismanual sqlite3_errstr SQLITE3_ERRSTR "${HAVE_SQLITE3_ERRSTR}"; then
+if ismanual sqlite3_errstr SQLITE3_ERRSTR "${HAVE_SQLITE3_ERRSTR}"; then
:
else
runtest sqlite3_errstr SQLITE3_ERRSTR "${LD_SQLITE3}" || true
@@ -395,7 +380,6 @@ cat << __HEREDOC__
#define HAVE_STRTONUM ${HAVE_STRTONUM}
#define HAVE_VASPRINTF ${HAVE_VASPRINTF}
#define HAVE_WCHAR ${HAVE_WCHAR}
-#define HAVE_SQLITE3 ${HAVE_SQLITE3}
#define HAVE_SQLITE3_ERRSTR ${HAVE_SQLITE3_ERRSTR}
#define HAVE_OHASH ${HAVE_OHASH}
#define HAVE_MANPATH ${HAVE_MANPATH}
@@ -435,7 +419,7 @@ fi
[ ${HAVE_REALLOCARRAY} -eq 0 ] && \
echo "extern void *reallocarray(void *, size_t, size_t);"
-[ ${BUILD_DB} -gt 0 -a ${HAVE_SQLITE3_ERRSTR} -eq 0 ] &&
+[ ${HAVE_SQLITE3_ERRSTR} -eq 0 ] &&
echo "extern const char *sqlite3_errstr(int);"
[ ${HAVE_STRCASESTR} -eq 0 ] && \
@@ -477,16 +461,9 @@ exec > Makefile.local
[ -z "${INSTALL_MAN}" ] && INSTALL_MAN="${INSTALL} -m 0444"
[ -z "${INSTALL_DATA}" ] && INSTALL_DATA="${INSTALL} -m 0444"
-if [ ${BUILD_DB} -eq 0 -a ${BUILD_CGI} -gt 0 ]; then
- echo "BUILD_CGI=0 (no BUILD_DB)" 1>&2
- echo "BUILD_CGI=0 (no BUILD_DB)" 1>&3
- BUILD_CGI=0
-fi
-
BUILD_TARGETS=""
[ ${BUILD_CGI} -gt 0 ] && BUILD_TARGETS="${BUILD_TARGETS} man.cgi"
-INSTALL_TARGETS="base-install"
-[ ${BUILD_DB} -gt 0 ] && INSTALL_TARGETS="${INSTALL_TARGETS} db-install"
+INSTALL_TARGETS="base-install db-install"
[ ${BUILD_CGI} -gt 0 ] && INSTALL_TARGETS="${INSTALL_TARGETS} cgi-install"
cat << __HEREDOC__
@@ -524,9 +501,6 @@ INSTALL_MAN = ${INSTALL_MAN}
INSTALL_DATA = ${INSTALL_DATA}
LN = ${LN}
__HEREDOC__
-
-[ ${BUILD_DB} -gt 0 ] && \
- echo "MAIN_OBJS = \$(BASE_OBJS) \$(DB_OBJS)"
echo "Makefile.local: written" 1>&2
echo "Makefile.local: written" 1>&3
Index: configure.local.example
===================================================================
RCS file: /home/cvs/mdocml/mdocml/configure.local.example,v
retrieving revision 1.14.2.7
retrieving revision 1.14.2.8
diff -Lconfigure.local.example -Lconfigure.local.example -u -p -r1.14.2.7 -r1.14.2.8
--- configure.local.example
+++ configure.local.example
@@ -174,13 +174,6 @@ INSTALL_DATA="${INSTALL} -m 0444"
# --- user settings related to database support ------------------------
-# By default, building makewhatis(8) and apropos(1) is enabled.
-# To disable it, for example to avoid the dependency on SQLite3,
-# use the following line. It that case, the remaining settings
-# in this section are irrelevant.
-
-BUILD_DB=0
-
# Autoconfiguration tries the following linker flags to find the
# SQLite3 library installed on your system. If none of these work,
# set the following variable to specify the required linker flags.
@@ -222,7 +215,6 @@ HOMEBREWDIR="${PREFIX}/Cellar"
# By default, building man.cgi(8) is disabled. To enable it, copy
# cgi.h.example to cgi.h, edit it, and use the following line.
-# Obviously, this requires that BUILD_DB is enabled, too.
BUILD_CGI=1
@@ -299,6 +291,5 @@ HAVE_STRTONUM=0
HAVE_VASPRINTF=0
HAVE_WCHAR=0
-HAVE_SQLITE3=0
HAVE_SQLITE3_ERRSTR=0
HAVE_OHASH=0
Index: main.c
===================================================================
RCS file: /home/cvs/mdocml/mdocml/main.c,v
retrieving revision 1.273.2.8
retrieving revision 1.273.2.9
diff -Lmain.c -Lmain.c -u -p -r1.273.2.8 -r1.273.2.9
--- main.c
+++ main.c
@@ -81,11 +81,7 @@ struct curparse {
struct manoutput *outopts; /* output options */
};
-
-#if HAVE_SQLITE3
int mandocdb(int, char *[]);
-#endif
-
static int fs_lookup(const struct manpaths *,
size_t ipath, const char *,
const char *, const char *,
@@ -146,11 +142,9 @@ main(int argc, char *argv[])
setprogname(progname);
#endif
-#if HAVE_SQLITE3
if (strncmp(progname, "mandocdb", 8) == 0 ||
strcmp(progname, BINM_MAKEWHATIS) == 0)
return mandocdb(argc, argv);
-#endif
#if HAVE_PLEDGE
if (pledge("stdio rpath tmppath tty proc exec flock", NULL) == -1)
@@ -371,20 +365,10 @@ main(int argc, char *argv[])
/* Access the mandoc database. */
manconf_parse(&conf, conf_file, defpaths, auxpaths);
-#if HAVE_SQLITE3
mansearch_setup(1);
if ( ! mansearch(&search, &conf.manpath,
argc, argv, &res, &sz))
usage(search.argmode);
-#else
- if (search.argmode != ARG_NAME) {
- fputs("mandoc: database support not compiled in\n",
- stderr);
- return (int)MANDOCLEVEL_BADARG;
- }
- sz = 0;
-#endif
-
if (sz == 0) {
if (search.argmode == ARG_NAME)
fs_search(&search, &conf.manpath,
@@ -537,10 +521,8 @@ main(int argc, char *argv[])
out:
if (search.argmode != ARG_FILE) {
manconf_free(&conf);
-#if HAVE_SQLITE3
mansearch_free(res, sz);
mansearch_setup(0);
-#endif
}
free(defos);
@@ -682,10 +664,8 @@ fs_lookup(const struct manpaths *paths,
return 0;
found:
-#if HAVE_SQLITE3
warnx("outdated mandoc.db lacks %s(%s) entry, run %s %s",
name, sec, BINM_MAKEWHATIS, paths->paths[ipath]);
-#endif
*res = mandoc_reallocarray(*res, ++*ressz, sizeof(struct manpage));
page = *res + (*ressz - 1);
page->file = file;
--
To unsubscribe send an email to source+unsubscribe@mdocml.bsd.lv
reply other threads:[~2017-02-21 17:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8725228931891341224.enqueue@fantadrom.bsd.lv \
--to=schwarze@mdocml.bsd.lv \
--cc=source@mdocml.bsd.lv \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).