mailing list of musl libc
 help / color / mirror / code / Atom feed
* [PATCH] ftello: Need adjust file offset before switching to write
@ 2019-12-18 10:18 wangjianjian (C)
  2019-12-18 13:46 ` Rich Felker
  0 siblings, 1 reply; 5+ messages in thread
From: wangjianjian (C) @ 2019-12-18 10:18 UTC (permalink / raw)
  To: musl; +Cc: Songyunlong (Euler)

Consider below code flow:

FILE *fp = fopen("foobar", "w+");
fputs("hello", fp);
rewind(fp);
fgetc(fp);
ungetc('x', fp);
fputs("world", fp);
off = ftello(fp);

In this code snippet, 'off' will be 10 at last which should be 5 and
file 'foobar's content will be 'helloworld' which is not correct.

The reason is that when do read, we will try our best to get more data
to fill user-provided and the default stream buffer so that the
underlying file offset may not be consistent with stream offset.
As an example above, 'fgetc' will read the whole 5 bytes from 'foobar'
even though we just would like to read one char.

And when we switch to write, we need to adjust the file offset by
decreasing the size of already buffered but not readed data.

Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
---
 src/stdio/__towrite.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/src/stdio/__towrite.c b/src/stdio/__towrite.c
index 4c9c66ae..dde3c967 100644
--- a/src/stdio/__towrite.c
+++ b/src/stdio/__towrite.c
@@ -7,6 +7,12 @@ int __towrite(FILE *f)
 		f->flags |= F_ERR;
 		return EOF;
 	}
+
+	/* Adjust offset for already buffered but not readed data */
+	if (f->rend - f->rpos > 0 &&
+	    f->seek(f, f->rpos - f->rend, SEEK_CUR) < 0)
+		return EOF;
+
 	/* Clear read buffer (easier than summoning nasal demons) */
 	f->rpos = f->rend = 0;


BR,
Wang Jianjian



^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] ftello: Need adjust file offset before switching to write
  2019-12-18 10:18 [PATCH] ftello: Need adjust file offset before switching to write wangjianjian (C)
@ 2019-12-18 13:46 ` Rich Felker
  2019-12-19  2:47   ` 答复: [musl] " wangjianjian (C)
  0 siblings, 1 reply; 5+ messages in thread
From: Rich Felker @ 2019-12-18 13:46 UTC (permalink / raw)
  To: wangjianjian (C); +Cc: musl, Songyunlong (Euler)

On Wed, Dec 18, 2019 at 10:18:16AM +0000, wangjianjian (C) wrote:
> Consider below code flow:
> 
> FILE *fp = fopen("foobar", "w+");
> fputs("hello", fp);
> rewind(fp);
> fgetc(fp);
> ungetc('x', fp);
> fputs("world", fp);
  ^^^^^^^^^^^^^^^^^^^

This line produces UB. You can't perform a write after ungetc without
an intervening successful seek (or hitting EOF).

Rich


^ permalink raw reply	[flat|nested] 5+ messages in thread

* 答复: [musl] [PATCH] ftello: Need adjust file offset before switching to write
  2019-12-18 13:46 ` Rich Felker
@ 2019-12-19  2:47   ` wangjianjian (C)
  2019-12-19  3:03     ` Rich Felker
  0 siblings, 1 reply; 5+ messages in thread
From: wangjianjian (C) @ 2019-12-19  2:47 UTC (permalink / raw)
  To: Rich Felker; +Cc: musl, Songyunlong (Euler)

I don't think this has something to do with ungetc or UB.
If don't call ungetc and replace fputs with others, like fwrite or fputc, the result of ftell or final file content is not correct.

-----邮件原件-----
发件人: Rich Felker [mailto:dalias@aerifal.cx] 代表 Rich Felker
发送时间: 2019年12月18日 21:47
收件人: wangjianjian (C) <wangjianjian3@huawei.com>
抄送: musl@lists.openwall.com; Songyunlong (Euler) <yunlong.song@huawei.com>
主题: Re: [musl] [PATCH] ftello: Need adjust file offset before switching to write

On Wed, Dec 18, 2019 at 10:18:16AM +0000, wangjianjian (C) wrote:
> Consider below code flow:
> 
> FILE *fp = fopen("foobar", "w+");
> fputs("hello", fp);
> rewind(fp);
> fgetc(fp);
> ungetc('x', fp);
> fputs("world", fp);
  ^^^^^^^^^^^^^^^^^^^

This line produces UB. You can't perform a write after ungetc without an intervening successful seek (or hitting EOF).

Rich

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: 答复: [musl] [PATCH] ftello: Need adjust file offset before switching to write
  2019-12-19  2:47   ` 答复: [musl] " wangjianjian (C)
@ 2019-12-19  3:03     ` Rich Felker
  2019-12-19  3:19       ` 答复: " wangjianjian (C)
  0 siblings, 1 reply; 5+ messages in thread
From: Rich Felker @ 2019-12-19  3:03 UTC (permalink / raw)
  To: wangjianjian (C); +Cc: musl, Songyunlong (Euler)

On Thu, Dec 19, 2019 at 02:47:46AM +0000, wangjianjian (C) wrote:
> I don't think this has something to do with ungetc or UB.
> If don't call ungetc and replace fputs with others, like fwrite or
> fputc, the result of ftell or final file content is not correct.

You cannot switch between reading and writing on a stream that's open
for both without a successful seek in between, unless the read ended
with hitting EOF. You're right that if you remove the ungetc, the UB
is still there because fgetc is still there. Removing both, or putting
a seek after them but before the fputs, will make things work as
expected.

For details see 7.21.5.3 The fopen function, ¶7:

    "When a file is opened with update mode ('+' as the second or
    third character in the above list of mode argument values), both
    input and output may be performed on the associated stream.
    However, output shall not be directly followed by input without an
    intervening call to the fflush function or to a file positioning
    function (fseek, fsetpos, or rewind), and input shall not be
    directly followed by output without an intervening call to a file
    positioning function, unless the input operation encounters end-
    of-file. Opening (or creating) a text file with update mode may
    instead open (or create) a binary stream in some implementations."

http://port70.net/~nsz/c/c11/n1570.html#7.21.5.3

Rich


 -----邮件原件-----
> 发件人: Rich Felker [mailto:dalias@aerifal.cx] 代表 Rich Felker
> 发送时间: 2019年12月18日 21:47
> 收件人: wangjianjian (C) <wangjianjian3@huawei.com>
> 抄送: musl@lists.openwall.com; Songyunlong (Euler) <yunlong.song@huawei.com>
> 主题: Re: [musl] [PATCH] ftello: Need adjust file offset before switching to write
> 
> On Wed, Dec 18, 2019 at 10:18:16AM +0000, wangjianjian (C) wrote:
> > Consider below code flow:
> > 
> > FILE *fp = fopen("foobar", "w+");
> > fputs("hello", fp);
> > rewind(fp);
> > fgetc(fp);
> > ungetc('x', fp);
> > fputs("world", fp);
>   ^^^^^^^^^^^^^^^^^^^
> 
> This line produces UB. You can't perform a write after ungetc without an intervening successful seek (or hitting EOF).
> 
> Rich


^ permalink raw reply	[flat|nested] 5+ messages in thread

* 答复: 答复: [musl] [PATCH] ftello: Need adjust file offset before switching to write
  2019-12-19  3:03     ` Rich Felker
@ 2019-12-19  3:19       ` wangjianjian (C)
  0 siblings, 0 replies; 5+ messages in thread
From: wangjianjian (C) @ 2019-12-19  3:19 UTC (permalink / raw)
  To: Rich Felker; +Cc: musl, Songyunlong (Euler)

Gotcha. Thanks for detailed explanation.

-----邮件原件-----
发件人: Rich Felker [mailto:dalias@aerifal.cx] 代表 Rich Felker
发送时间: 2019年12月19日 11:03
收件人: wangjianjian (C) <wangjianjian3@huawei.com>
抄送: musl@lists.openwall.com; Songyunlong (Euler) <yunlong.song@huawei.com>
主题: Re: 答复: [musl] [PATCH] ftello: Need adjust file offset before switching to write

On Thu, Dec 19, 2019 at 02:47:46AM +0000, wangjianjian (C) wrote:
> I don't think this has something to do with ungetc or UB.
> If don't call ungetc and replace fputs with others, like fwrite or 
> fputc, the result of ftell or final file content is not correct.

You cannot switch between reading and writing on a stream that's open for both without a successful seek in between, unless the read ended with hitting EOF. You're right that if you remove the ungetc, the UB is still there because fgetc is still there. Removing both, or putting a seek after them but before the fputs, will make things work as expected.

For details see 7.21.5.3 The fopen function, ¶7:

    "When a file is opened with update mode ('+' as the second or
    third character in the above list of mode argument values), both
    input and output may be performed on the associated stream.
    However, output shall not be directly followed by input without an
    intervening call to the fflush function or to a file positioning
    function (fseek, fsetpos, or rewind), and input shall not be
    directly followed by output without an intervening call to a file
    positioning function, unless the input operation encounters end-
    of-file. Opening (or creating) a text file with update mode may
    instead open (or create) a binary stream in some implementations."

http://port70.net/~nsz/c/c11/n1570.html#7.21.5.3

Rich


 -----邮件原件-----
> 发件人: Rich Felker [mailto:dalias@aerifal.cx] 代表 Rich Felker
> 发送时间: 2019年12月18日 21:47
> 收件人: wangjianjian (C) <wangjianjian3@huawei.com>
> 抄送: musl@lists.openwall.com; Songyunlong (Euler) 
> <yunlong.song@huawei.com>
> 主题: Re: [musl] [PATCH] ftello: Need adjust file offset before 
> switching to write
> 
> On Wed, Dec 18, 2019 at 10:18:16AM +0000, wangjianjian (C) wrote:
> > Consider below code flow:
> > 
> > FILE *fp = fopen("foobar", "w+");
> > fputs("hello", fp);
> > rewind(fp);
> > fgetc(fp);
> > ungetc('x', fp);
> > fputs("world", fp);
>   ^^^^^^^^^^^^^^^^^^^
> 
> This line produces UB. You can't perform a write after ungetc without an intervening successful seek (or hitting EOF).
> 
> Rich

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2019-12-19  3:19 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-18 10:18 [PATCH] ftello: Need adjust file offset before switching to write wangjianjian (C)
2019-12-18 13:46 ` Rich Felker
2019-12-19  2:47   ` 答复: [musl] " wangjianjian (C)
2019-12-19  3:03     ` Rich Felker
2019-12-19  3:19       ` 答复: " wangjianjian (C)

Code repositories for project(s) associated with this public inbox

	https://git.vuxu.org/mirror/musl/

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).