* [musl] anyone know how to approach this problem (expect5.x.x hangs)
@ 2022-02-25 17:59 naruto canada
2022-02-25 19:35 ` [musl] " naruto canada
0 siblings, 1 reply; 8+ messages in thread
From: naruto canada @ 2022-02-25 17:59 UTC (permalink / raw)
To: musl
hi
I'm in the process of porting all my desktop env. over to musl.
I'm about 70% done. I hit a few minor snags but got over them.
I had expected a lot more painful experience, but it turned out ok.
I could not get xserver to compile but will work around using vnc for now.
I am quite happy I got qemu to compile.
The last 30% (Browsers !!!), I dare not approach them right now.
Anyway, back to my probem, expect5.x.x hangs,
no seg fault, so I do not know how to approach this problem.
normally I do a simple test:
expect -c "spawn ls" # this always succeeds.
(I use expect to automate password creation)
VNCRP=123456 # need 6 characters # create ~/.vnc/passwd
echo '#!/usr/bin/expect
set timeout -1
spawn vncpasswd
expect "Password:"
send "'$VNCRP'\r"
expect "Verify:"
send "'$VNCRP'\r"
expect "Would you like to enter a view-only password (y/n)?"
send "n\r"
interact' > /tmp/p.ex
expect /tmp/p.ex
This script works fine under glibc, but hangs under musl.
I've already tried the same version of expect and patches from
aports-3.15.0/main/expect/*.patch
I got the same result. (it hangs)
This is not a priority problem for me. I can easily work around it
without using expect.
Just wondering if anyone know how to approach this problem (when there
is no seg fault)
Thanks.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [musl] Re: anyone know how to approach this problem (expect5.x.x hangs)
2022-02-25 17:59 [musl] anyone know how to approach this problem (expect5.x.x hangs) naruto canada
@ 2022-02-25 19:35 ` naruto canada
2022-02-25 23:32 ` Rich Felker
0 siblings, 1 reply; 8+ messages in thread
From: naruto canada @ 2022-02-25 19:35 UTC (permalink / raw)
To: musl
On 2/25/22, naruto canada <narutocanada@gmail.com> wrote:
> hi
>
> I'm in the process of porting all my desktop env. over to musl.
> I'm about 70% done. I hit a few minor snags but got over them.
> I had expected a lot more painful experience, but it turned out ok.
> I could not get xserver to compile but will work around using vnc for now.
> I am quite happy I got qemu to compile.
> The last 30% (Browsers !!!), I dare not approach them right now.
>
> Anyway, back to my probem, expect5.x.x hangs,
> no seg fault, so I do not know how to approach this problem.
> normally I do a simple test:
> expect -c "spawn ls" # this always succeeds.
>
> (I use expect to automate password creation)
> VNCRP=123456 # need 6 characters # create ~/.vnc/passwd
> echo '#!/usr/bin/expect
> set timeout -1
> spawn vncpasswd
> expect "Password:"
> send "'$VNCRP'\r"
> expect "Verify:"
> send "'$VNCRP'\r"
> expect "Would you like to enter a view-only password (y/n)?"
> send "n\r"
> interact' > /tmp/p.ex
> expect /tmp/p.ex
> This script works fine under glibc, but hangs under musl.
>
> I've already tried the same version of expect and patches from
> aports-3.15.0/main/expect/*.patch
> I got the same result. (it hangs)
>
> This is not a priority problem for me. I can easily work around it
> without using expect.
> Just wondering if anyone know how to approach this problem (when there
> is no seg fault)
I did a quick strace, and compare it with glibc:
GLIBC CASE:
...
open("/tmp/p.ex", O_RDONLY) = 4
spawn vncpasswd
open("/dev/ptmx", O_RDWR) = 4
open("/etc/group", O_RDONLY|O_CLOEXEC) = 5
open("/dev/pts/18", O_RDWR|O_NOCTTY) = 5
Password:
Verify:
Would you like to enter a view-only password (y/n)? n
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=956,
si_status=0, si_utime=0, si_stime=0} ---
open("/dev/null", O_RDONLY)
= 4
open("/dev/null", O_RDONLY) = 3
open("/dev/null", O_RDONLY) = 2
open("/dev/null", O_RDONLY) = 0
+++ exited with 0 +++
MUSL CASE:
open("/tmp/p.ex", O_RDONLY|O_LARGEFILE) = 7
spawn vncpasswd
open("/dev/ptmx", O_RDWR|O_NOCTTY|O_LARGEFILE) = 7
open("/dev/pts/3", O_RDWR|O_NOCTTY|O_LARGEFILE) = 8
syscall_397(0xffffff9c, 0xb6f624e0, 0, 0x7ff, 0xbe927e48, 0xb6f624e0)
= -1 (errno 38)
syscall_397(0x8, 0xb6f58350, 0x1000, 0x7ff, 0xbe927e48, 0xb6f624e0) =
-1 (errno 38)
syscall_403(0, 0xbe928258, 0xb6e82de0, 0, 0xbe928334, 0) = -1 (errno 38)
syscall_389(0x10, 0, 0, 0xb6f62170, 0xbe92815c, 0xbe92808c) = -1 (errno 38)
It seems to block or stopped at syscall_389
( arch/arm/bits/syscall.h.in:#define __NR_membarrier 389 )
cd /build/musl-1.2.2/;
grep membarrier * -r
...
include/sys/membarrier.h:int membarrier(int, int);
ldso/dynlink.c:#include <sys/membarrier.h>
ldso/dynlink.c: * if the new dtv pointer is. The __membarrier function has a
ldso/dynlink.c: __membarrier(MEMBARRIER_CMD_PRIVATE_EXPEDITED, 0);
...
src/internal/pthread_impl.h:hidden void __membarrier_init(void);
src/linux/membarrier.c:#include <sys/membarrier.h>
src/linux/membarrier.c:int __membarrier(int cmd, int flags)
src/linux/membarrier.c: int r = __syscall(SYS_membarrier, cmd, flags);
src/linux/membarrier.c:void __membarrier_init(void)
src/linux/membarrier.c: /* If membarrier is linked, attempt to
pre-register to be able to use
src/linux/membarrier.c: __syscall(SYS_membarrier,
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED, 0);
src/linux/membarrier.c:weak_alias(__membarrier, membarrier);
src/thread/pthread_create.c:weak_alias(dummy_0, __membarrier_init);
src/thread/pthread_create.c: __membarrier_init();
I have no idea how to go further.
> Thanks.
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [musl] Re: anyone know how to approach this problem (expect5.x.x hangs)
2022-02-25 19:35 ` [musl] " naruto canada
@ 2022-02-25 23:32 ` Rich Felker
2022-02-26 2:46 ` naruto canada
0 siblings, 1 reply; 8+ messages in thread
From: Rich Felker @ 2022-02-25 23:32 UTC (permalink / raw)
To: naruto canada; +Cc: musl
On Fri, Feb 25, 2022 at 07:35:39PM +0000, naruto canada wrote:
> On 2/25/22, naruto canada <narutocanada@gmail.com> wrote:
> > hi
> >
> > I'm in the process of porting all my desktop env. over to musl.
> > I'm about 70% done. I hit a few minor snags but got over them.
> > I had expected a lot more painful experience, but it turned out ok.
> > I could not get xserver to compile but will work around using vnc for now.
> > I am quite happy I got qemu to compile.
> > The last 30% (Browsers !!!), I dare not approach them right now.
> >
> > Anyway, back to my probem, expect5.x.x hangs,
> > no seg fault, so I do not know how to approach this problem.
> > normally I do a simple test:
> > expect -c "spawn ls" # this always succeeds.
> >
> > (I use expect to automate password creation)
> > VNCRP=123456 # need 6 characters # create ~/.vnc/passwd
> > echo '#!/usr/bin/expect
> > set timeout -1
> > spawn vncpasswd
> > expect "Password:"
> > send "'$VNCRP'\r"
> > expect "Verify:"
> > send "'$VNCRP'\r"
> > expect "Would you like to enter a view-only password (y/n)?"
> > send "n\r"
> > interact' > /tmp/p.ex
> > expect /tmp/p.ex
> > This script works fine under glibc, but hangs under musl.
> >
> > I've already tried the same version of expect and patches from
> > aports-3.15.0/main/expect/*.patch
> > I got the same result. (it hangs)
> >
> > This is not a priority problem for me. I can easily work around it
> > without using expect.
> > Just wondering if anyone know how to approach this problem (when there
> > is no seg fault)
>
> I did a quick strace, and compare it with glibc:
> GLIBC CASE:
> ....
> open("/tmp/p.ex", O_RDONLY) = 4
> spawn vncpasswd
> open("/dev/ptmx", O_RDWR) = 4
> open("/etc/group", O_RDONLY|O_CLOEXEC) = 5
> open("/dev/pts/18", O_RDWR|O_NOCTTY) = 5
> Password:
> Verify:
> Would you like to enter a view-only password (y/n)? n
> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=956,
> si_status=0, si_utime=0, si_stime=0} ---
>
> open("/dev/null", O_RDONLY)
> = 4
> open("/dev/null", O_RDONLY) = 3
> open("/dev/null", O_RDONLY) = 2
> open("/dev/null", O_RDONLY) = 0
> +++ exited with 0 +++
>
> MUSL CASE:
> open("/tmp/p.ex", O_RDONLY|O_LARGEFILE) = 7
> spawn vncpasswd
> open("/dev/ptmx", O_RDWR|O_NOCTTY|O_LARGEFILE) = 7
> open("/dev/pts/3", O_RDWR|O_NOCTTY|O_LARGEFILE) = 8
> syscall_397(0xffffff9c, 0xb6f624e0, 0, 0x7ff, 0xbe927e48, 0xb6f624e0)
> = -1 (errno 38)
> syscall_397(0x8, 0xb6f58350, 0x1000, 0x7ff, 0xbe927e48, 0xb6f624e0) =
> -1 (errno 38)
> syscall_403(0, 0xbe928258, 0xb6e82de0, 0, 0xbe928334, 0) = -1 (errno 38)
> syscall_389(0x10, 0, 0, 0xb6f62170, 0xbe92815c, 0xbe92808c) = -1 (errno 38)
>
> It seems to block or stopped at syscall_389
> ( arch/arm/bits/syscall.h.in:#define __NR_membarrier 389 )
The syscall has returned, so it's something after that which is
hanging. Running under gdb and hitting ^C could show where.
Something very wrong is going on here, since the syscalls are failing
with ENOSYS but no fallback path has been taken. If it's musl making
them, it will not assume these exist but will check for ENOSYS and
make an alternate syscall if that happens. So it would seem that
either these syscalls are being made directly by the application
(expect) or something went very wrong in building musl (weird patches?
stale build dir previously used for another arch? ..?) that has the
wrong thing happening.
What kernel version are you using? There was a recent thread on the
list where someone had a badly patched kernel from Google that did
something to mess up ENOSYS, and strace hid the bug, so perhaps this
is similar.
Rich
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [musl] Re: anyone know how to approach this problem (expect5.x.x hangs)
2022-02-25 23:32 ` Rich Felker
@ 2022-02-26 2:46 ` naruto canada
2022-02-26 13:48 ` Rich Felker
0 siblings, 1 reply; 8+ messages in thread
From: naruto canada @ 2022-02-26 2:46 UTC (permalink / raw)
To: Rich Felker; +Cc: musl
On 2/25/22, Rich Felker <dalias@libc.org> wrote:
> On Fri, Feb 25, 2022 at 07:35:39PM +0000, naruto canada wrote:
>> On 2/25/22, naruto canada <narutocanada@gmail.com> wrote:
>> > hi
>> >
>> > I'm in the process of porting all my desktop env. over to musl.
>> > I'm about 70% done. I hit a few minor snags but got over them.
>> > I had expected a lot more painful experience, but it turned out ok.
>> > I could not get xserver to compile but will work around using vnc for
>> > now.
>> > I am quite happy I got qemu to compile.
>> > The last 30% (Browsers !!!), I dare not approach them right now.
>> >
>> > Anyway, back to my probem, expect5.x.x hangs,
>> > no seg fault, so I do not know how to approach this problem.
>> > normally I do a simple test:
>> > expect -c "spawn ls" # this always succeeds.
>> >
>> > (I use expect to automate password creation)
>> > VNCRP=123456 # need 6 characters # create ~/.vnc/passwd
>> > echo '#!/usr/bin/expect
>> > set timeout -1
>> > spawn vncpasswd
>> > expect "Password:"
>> > send "'$VNCRP'\r"
>> > expect "Verify:"
>> > send "'$VNCRP'\r"
>> > expect "Would you like to enter a view-only password (y/n)?"
>> > send "n\r"
>> > interact' > /tmp/p.ex
>> > expect /tmp/p.ex
>> > This script works fine under glibc, but hangs under musl.
>> >
>> > I've already tried the same version of expect and patches from
>> > aports-3.15.0/main/expect/*.patch
>> > I got the same result. (it hangs)
>> >
>> > This is not a priority problem for me. I can easily work around it
>> > without using expect.
>> > Just wondering if anyone know how to approach this problem (when there
>> > is no seg fault)
>>
>> I did a quick strace, and compare it with glibc:
>> GLIBC CASE:
>> ....
>> open("/tmp/p.ex", O_RDONLY) = 4
>> spawn vncpasswd
>> open("/dev/ptmx", O_RDWR) = 4
>> open("/etc/group", O_RDONLY|O_CLOEXEC) = 5
>> open("/dev/pts/18", O_RDWR|O_NOCTTY) = 5
>> Password:
>> Verify:
>> Would you like to enter a view-only password (y/n)? n
>> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=956,
>> si_status=0, si_utime=0, si_stime=0} ---
>>
>> open("/dev/null", O_RDONLY)
>> = 4
>> open("/dev/null", O_RDONLY) = 3
>> open("/dev/null", O_RDONLY) = 2
>> open("/dev/null", O_RDONLY) = 0
>> +++ exited with 0 +++
>>
>> MUSL CASE:
>> open("/tmp/p.ex", O_RDONLY|O_LARGEFILE) = 7
>> spawn vncpasswd
>> open("/dev/ptmx", O_RDWR|O_NOCTTY|O_LARGEFILE) = 7
>> open("/dev/pts/3", O_RDWR|O_NOCTTY|O_LARGEFILE) = 8
>> syscall_397(0xffffff9c, 0xb6f624e0, 0, 0x7ff, 0xbe927e48, 0xb6f624e0)
>> = -1 (errno 38)
>> syscall_397(0x8, 0xb6f58350, 0x1000, 0x7ff, 0xbe927e48, 0xb6f624e0) =
>> -1 (errno 38)
>> syscall_403(0, 0xbe928258, 0xb6e82de0, 0, 0xbe928334, 0) = -1 (errno 38)
>> syscall_389(0x10, 0, 0, 0xb6f62170, 0xbe92815c, 0xbe92808c) = -1 (errno
>> 38)
>>
>> It seems to block or stopped at syscall_389
>> ( arch/arm/bits/syscall.h.in:#define __NR_membarrier 389 )
>
> The syscall has returned, so it's something after that which is
> hanging. Running under gdb and hitting ^C could show where.
>
> Something very wrong is going on here, since the syscalls are failing
> with ENOSYS but no fallback path has been taken. If it's musl making
> them, it will not assume these exist but will check for ENOSYS and
> make an alternate syscall if that happens. So it would seem that
> either these syscalls are being made directly by the application
> (expect) or something went very wrong in building musl (weird patches?
> stale build dir previously used for another arch? ..?) that has the
> wrong thing happening.
>
> What kernel version are you using? There was a recent thread on the
> list where someone had a badly patched kernel from Google that did
> something to mess up ENOSYS, and strace hid the bug, so perhaps this
> is similar.
It is compiled on (and running on) android phone.
I have no control over the kernel (3.4.0-perf-g63c3cac) (LG G3).
(I have already matched kernel header (3.4.0) when compile the tool
and the World)
I used 3.10.x before and got into problem, so I matched the kernel header
this time. This is the gdb result (I ran 3 times). It always stopped
at the same place:
gdb expect
GNU gdb (GDB) 7.12.1
Copyright (C) 2017 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "arm-00200-linux-musleabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from expect...done.
(gdb) run /tmp/p.ex
Starting program: /00200/bin/expect /tmp/p.ex
spawn vncpasswd
^C
Program received signal SIGINT, Interrupt.
__cp_begin () at src/thread/arm/syscall_cp.s:23
23 src/thread/arm/syscall_cp.s: No such file or directory.
(gdb)
BTW. gcc is version 5.3.0 and the patch set is exactly as from:
https://github.com/GregorR/musl-gcc-patches
musl-1.2.2 is not patched.
specs file is patched to always emit:
-march=armv4 -mtune=strongarm -mno-thumb-interwork -mfloat-abi=hard
Strange, "svc 0" should not have stopped or blocked, because
normally kernel should have returned right away.
svc 0 <=== line 23
__cp_end:
ldmfd sp!,{r4,r5,r6,r7}
bx lr
I will try the exact same build script later on x86 and see.what happens.
I will report back later.
>
> Rich
>
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [musl] Re: anyone know how to approach this problem (expect5.x.x hangs)
2022-02-26 2:46 ` naruto canada
@ 2022-02-26 13:48 ` Rich Felker
2022-02-27 15:35 ` naruto canada
0 siblings, 1 reply; 8+ messages in thread
From: Rich Felker @ 2022-02-26 13:48 UTC (permalink / raw)
To: naruto canada; +Cc: musl
On Sat, Feb 26, 2022 at 02:46:10AM +0000, naruto canada wrote:
> On 2/25/22, Rich Felker <dalias@libc.org> wrote:
> > On Fri, Feb 25, 2022 at 07:35:39PM +0000, naruto canada wrote:
> >> On 2/25/22, naruto canada <narutocanada@gmail.com> wrote:
> >> > hi
> >> >
> >> > I'm in the process of porting all my desktop env. over to musl.
> >> > I'm about 70% done. I hit a few minor snags but got over them.
> >> > I had expected a lot more painful experience, but it turned out ok.
> >> > I could not get xserver to compile but will work around using vnc for
> >> > now.
> >> > I am quite happy I got qemu to compile.
> >> > The last 30% (Browsers !!!), I dare not approach them right now.
> >> >
> >> > Anyway, back to my probem, expect5.x.x hangs,
> >> > no seg fault, so I do not know how to approach this problem.
> >> > normally I do a simple test:
> >> > expect -c "spawn ls" # this always succeeds.
> >> >
> >> > (I use expect to automate password creation)
> >> > VNCRP=123456 # need 6 characters # create ~/.vnc/passwd
> >> > echo '#!/usr/bin/expect
> >> > set timeout -1
> >> > spawn vncpasswd
> >> > expect "Password:"
> >> > send "'$VNCRP'\r"
> >> > expect "Verify:"
> >> > send "'$VNCRP'\r"
> >> > expect "Would you like to enter a view-only password (y/n)?"
> >> > send "n\r"
> >> > interact' > /tmp/p.ex
> >> > expect /tmp/p.ex
> >> > This script works fine under glibc, but hangs under musl.
> >> >
> >> > I've already tried the same version of expect and patches from
> >> > aports-3.15.0/main/expect/*.patch
> >> > I got the same result. (it hangs)
> >> >
> >> > This is not a priority problem for me. I can easily work around it
> >> > without using expect.
> >> > Just wondering if anyone know how to approach this problem (when there
> >> > is no seg fault)
> >>
> >> I did a quick strace, and compare it with glibc:
> >> GLIBC CASE:
> >> ....
> >> open("/tmp/p.ex", O_RDONLY) = 4
> >> spawn vncpasswd
> >> open("/dev/ptmx", O_RDWR) = 4
> >> open("/etc/group", O_RDONLY|O_CLOEXEC) = 5
> >> open("/dev/pts/18", O_RDWR|O_NOCTTY) = 5
> >> Password:
> >> Verify:
> >> Would you like to enter a view-only password (y/n)? n
> >> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=956,
> >> si_status=0, si_utime=0, si_stime=0} ---
> >>
> >> open("/dev/null", O_RDONLY)
> >> = 4
> >> open("/dev/null", O_RDONLY) = 3
> >> open("/dev/null", O_RDONLY) = 2
> >> open("/dev/null", O_RDONLY) = 0
> >> +++ exited with 0 +++
> >>
> >> MUSL CASE:
> >> open("/tmp/p.ex", O_RDONLY|O_LARGEFILE) = 7
> >> spawn vncpasswd
> >> open("/dev/ptmx", O_RDWR|O_NOCTTY|O_LARGEFILE) = 7
> >> open("/dev/pts/3", O_RDWR|O_NOCTTY|O_LARGEFILE) = 8
> >> syscall_397(0xffffff9c, 0xb6f624e0, 0, 0x7ff, 0xbe927e48, 0xb6f624e0)
> >> = -1 (errno 38)
> >> syscall_397(0x8, 0xb6f58350, 0x1000, 0x7ff, 0xbe927e48, 0xb6f624e0) =
> >> -1 (errno 38)
> >> syscall_403(0, 0xbe928258, 0xb6e82de0, 0, 0xbe928334, 0) = -1 (errno 38)
> >> syscall_389(0x10, 0, 0, 0xb6f62170, 0xbe92815c, 0xbe92808c) = -1 (errno
> >> 38)
> >>
> >> It seems to block or stopped at syscall_389
> >> ( arch/arm/bits/syscall.h.in:#define __NR_membarrier 389 )
> >
> > The syscall has returned, so it's something after that which is
> > hanging. Running under gdb and hitting ^C could show where.
> >
> > Something very wrong is going on here, since the syscalls are failing
> > with ENOSYS but no fallback path has been taken. If it's musl making
> > them, it will not assume these exist but will check for ENOSYS and
> > make an alternate syscall if that happens. So it would seem that
> > either these syscalls are being made directly by the application
> > (expect) or something went very wrong in building musl (weird patches?
> > stale build dir previously used for another arch? ..?) that has the
> > wrong thing happening.
> >
> > What kernel version are you using? There was a recent thread on the
> > list where someone had a badly patched kernel from Google that did
> > something to mess up ENOSYS, and strace hid the bug, so perhaps this
> > is similar.
>
> It is compiled on (and running on) android phone.
> I have no control over the kernel (3.4.0-perf-g63c3cac) (LG G3).
> (I have already matched kernel header (3.4.0) when compile the tool
> and the World)
> I used 3.10.x before and got into problem, so I matched the kernel header
> this time. This is the gdb result (I ran 3 times). It always stopped
> at the same place:
The kernel headers you use should not matter at all. Do you know where
we can find the sources for LG's kernel? I'm guessing they did
something horrible...
Rich
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [musl] Re: anyone know how to approach this problem (expect5.x.x hangs)
2022-02-26 13:48 ` Rich Felker
@ 2022-02-27 15:35 ` naruto canada
2022-02-27 21:29 ` naruto canada
0 siblings, 1 reply; 8+ messages in thread
From: naruto canada @ 2022-02-27 15:35 UTC (permalink / raw)
To: Rich Felker; +Cc: musl
On 2/26/22, Rich Felker <dalias@libc.org> wrote:
> On Sat, Feb 26, 2022 at 02:46:10AM +0000, naruto canada wrote:
>> On 2/25/22, Rich Felker <dalias@libc.org> wrote:
>> > On Fri, Feb 25, 2022 at 07:35:39PM +0000, naruto canada wrote:
>> >> On 2/25/22, naruto canada <narutocanada@gmail.com> wrote:
>> >> > hi
>> >> >
>> >> > I'm in the process of porting all my desktop env. over to musl.
>> >> > I'm about 70% done. I hit a few minor snags but got over them.
>> >> > I had expected a lot more painful experience, but it turned out ok.
>> >> > I could not get xserver to compile but will work around using vnc
>> >> > for
>> >> > now.
>> >> > I am quite happy I got qemu to compile.
>> >> > The last 30% (Browsers !!!), I dare not approach them right now.
>> >> >
>> >> > Anyway, back to my probem, expect5.x.x hangs,
>> >> > no seg fault, so I do not know how to approach this problem.
>> >> > normally I do a simple test:
>> >> > expect -c "spawn ls" # this always succeeds.
>> >> >
>> >> > (I use expect to automate password creation)
>> >> > VNCRP=123456 # need 6 characters # create ~/.vnc/passwd
>> >> > echo '#!/usr/bin/expect
>> >> > set timeout -1
>> >> > spawn vncpasswd
>> >> > expect "Password:"
>> >> > send "'$VNCRP'\r"
>> >> > expect "Verify:"
>> >> > send "'$VNCRP'\r"
>> >> > expect "Would you like to enter a view-only password (y/n)?"
>> >> > send "n\r"
>> >> > interact' > /tmp/p.ex
>> >> > expect /tmp/p.ex
>> >> > This script works fine under glibc, but hangs under musl.
>> >> >
>> >> > I've already tried the same version of expect and patches from
>> >> > aports-3.15.0/main/expect/*.patch
>> >> > I got the same result. (it hangs)
>> >> >
>> >> > This is not a priority problem for me. I can easily work around it
>> >> > without using expect.
>> >> > Just wondering if anyone know how to approach this problem (when
>> >> > there
>> >> > is no seg fault)
>> >>
>> >> I did a quick strace, and compare it with glibc:
>> >> GLIBC CASE:
>> >> ....
>> >> open("/tmp/p.ex", O_RDONLY) = 4
>> >> spawn vncpasswd
>> >> open("/dev/ptmx", O_RDWR) = 4
>> >> open("/etc/group", O_RDONLY|O_CLOEXEC) = 5
>> >> open("/dev/pts/18", O_RDWR|O_NOCTTY) = 5
>> >> Password:
>> >> Verify:
>> >> Would you like to enter a view-only password (y/n)? n
>> >> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=956,
>> >> si_status=0, si_utime=0, si_stime=0} ---
>> >>
>> >> open("/dev/null", O_RDONLY)
>> >> = 4
>> >> open("/dev/null", O_RDONLY) = 3
>> >> open("/dev/null", O_RDONLY) = 2
>> >> open("/dev/null", O_RDONLY) = 0
>> >> +++ exited with 0 +++
>> >>
>> >> MUSL CASE:
>> >> open("/tmp/p.ex", O_RDONLY|O_LARGEFILE) = 7
>> >> spawn vncpasswd
>> >> open("/dev/ptmx", O_RDWR|O_NOCTTY|O_LARGEFILE) = 7
>> >> open("/dev/pts/3", O_RDWR|O_NOCTTY|O_LARGEFILE) = 8
>> >> syscall_397(0xffffff9c, 0xb6f624e0, 0, 0x7ff, 0xbe927e48, 0xb6f624e0)
>> >> = -1 (errno 38)
>> >> syscall_397(0x8, 0xb6f58350, 0x1000, 0x7ff, 0xbe927e48, 0xb6f624e0) =
>> >> -1 (errno 38)
>> >> syscall_403(0, 0xbe928258, 0xb6e82de0, 0, 0xbe928334, 0) = -1 (errno
>> >> 38)
>> >> syscall_389(0x10, 0, 0, 0xb6f62170, 0xbe92815c, 0xbe92808c) = -1
>> >> (errno
>> >> 38)
>> >>
>> >> It seems to block or stopped at syscall_389
>> >> ( arch/arm/bits/syscall.h.in:#define __NR_membarrier 389 )
>> >
>> > The syscall has returned, so it's something after that which is
>> > hanging. Running under gdb and hitting ^C could show where.
>> >
>> > Something very wrong is going on here, since the syscalls are failing
>> > with ENOSYS but no fallback path has been taken. If it's musl making
>> > them, it will not assume these exist but will check for ENOSYS and
>> > make an alternate syscall if that happens. So it would seem that
>> > either these syscalls are being made directly by the application
>> > (expect) or something went very wrong in building musl (weird patches?
>> > stale build dir previously used for another arch? ..?) that has the
>> > wrong thing happening.
>> >
>> > What kernel version are you using? There was a recent thread on the
>> > list where someone had a badly patched kernel from Google that did
>> > something to mess up ENOSYS, and strace hid the bug, so perhaps this
>> > is similar.
>>
>> It is compiled on (and running on) android phone.
>> I have no control over the kernel (3.4.0-perf-g63c3cac) (LG G3).
>> (I have already matched kernel header (3.4.0) when compile the tool
>> and the World)
>> I used 3.10.x before and got into problem, so I matched the kernel header
>> this time. This is the gdb result (I ran 3 times). It always stopped
>> at the same place:
>
> The kernel headers you use should not matter at all. Do you know where
> we can find the sources for LG's kernel? I'm guessing they did
> something horrible...
Actually I have downloaded the source code, but I do not know how to config and
match the device tree. There is no config.gz in /proc.
Besides, there are many variants for different countries, there is no way
to be certain that the source file is the one that
was built for and running on the phone.
Ok, here is the results from 2 phones and i686.
I will describe the common build script:
To eliminate complications I switched back to musl-1.1.24.
If there is any time64 issues this should have made it irrelevant.
C(XX)FLAGS enforced by specs file: -ggdb -O0
libssp enabled in gcc-5.3.0. linux-3.4 headers.
I am also monitoring any selinux denied messages from logcat.
0. Linux localhost 4.1.49 #1 SMP Sat Feb 12 17:41:04 UTC 2022 i686 GNU/Linux
1. Linux localhost 3.4.0-perf-g63c3cac #1 SMP PREEMPT Mon Nov 9
19:33:11 KST 2015 armv7l GNU/Linux (LG G3)
2. Linux localhost 3.10.49-g441c924c #1 SMP PREEMPT Mon May 16
19:35:10 CST 2016 armv7l GNU/Linux (Another cheap android phone but
slightly newer kernel)
i686 CASE:
strace -f -ff -o 1 expect /tmp/p.ex
tail 1.*
==> 1.14236 <==
close(0) = 0
write(6, "q", 1) = 1
close(6) = 0
futex(0xbf7fd53c, FUTEX_WAIT_PRIVATE, 2, NULL) = 0
futex(0xb76cf838, FUTEX_WAIT_PRIVATE, -2147483632, NULL) = 0
futex(0xb74dddac, FUTEX_WAIT_PRIVATE, 1, NULL) = 0
futex(0xb77ca568, FUTEX_WAIT, 14240, NULL) = 0
munmap(0xb74bb000, 143360) = 0
exit_group(130) = ?
+++ exited with 130 +++
==> 1.14237 <==
set_thread_area({entry_number:6, base_addr:0xb76c2064, limit:1048575,
seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1,
seg_not_present:0, useable:1}) = 0
set_tid_address(0xb7781568) = 14237
brk(0) = 0x86bf000
brk(0x86c4000) = 0x86c4000
mkdir("/root/.vnc/", 0777) = -1 EEXIST (File exists)
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
TCGETS, {B115200 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_CONTINUE or SNDRV_TIMER_IOCTL_GPARAMS or TCSETSF,
{B115200 opost isig icanon -echo ...}) = 0
read(0, 0xb777ffe8, 1024) = -1 EIO (I/O error)
--- SIGHUP {si_signo=SIGHUP, si_code=SI_KERNEL} ---
+++ killed by SIGHUP +++
==> 1.14238 <==
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 14239
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER, 0xb7787836},
{0x808c34a, [], SA_RESTORER, 0xb7787836}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=14239,
si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, 0xbfb515d4, WNOHANG, NULL) = -1 ECHILD (No child process)
sigreturn() (mask []) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
exit_group(0) = ?
+++ exited with 0 +++
==> 1.14239 <==
close(4) = 0
execve("/bin/stty", ["/bin/stty", "sane"], [/* 40 vars */]) = 0
set_thread_area({entry_number:-1 -> 6, base_addr:0x81d55cc,
limit:1048575, seg_32bit:1, contents:0, read_exec_only:0,
limit_in_pages:1, seg_not_present:0, useable:1}) = 0
set_tid_address(0x81d5e30) = 14239
getuid32() = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
TCGETS, {B115200 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_STOP or SNDRV_TIMER_IOCTL_GINFO or TCSETSW,
{B115200 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
TCGETS, {B115200 opost isig icanon echo ...}) = 0
exit_group(0) = ?
+++ exited with 0 +++
==> 1.14240 <==
read(5, "\0", 1) = 1
select(6, [5], [], [], NULL) = 1 (in [5])
read(5, "q", 1) = 1
close(5) = 0
futex(0xbf7fd53c, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0xb76cf838, FUTEX_WAKE_PRIVATE, 1) = 1
rt_sigprocmask(SIG_BLOCK, ~[RTMIN 33 34], [], 8) = 0
futex(0xb74dddac, FUTEX_WAKE_PRIVATE, 1) = 1
_exit(0) = ?
+++ exited with 130 +++
Total of 5 processes:
2 processes existed normally.
One is killed SIGHUP (main expect script I think)
Two existed with 130 (they are blocked by kernel till ctrl-c ?)
So 3 processes blocked, till ctrl-c was pressed.
LG.G3 CASE:
strace -f -ff -o 1 expect /tmp/p.ex
pstree -w
...
| | \-+= 28384 root strace -f -ff -o 1 expect /tmp/p.ex
| | \-+- 28389 root expect /tmp/p.ex
| | \--= 28390 root vncpasswd
...
tail 1.*
==> 1.27818 <==
fcntl64(2, F_SETFD, FD_CLOEXEC) = 0
close(0) = 0
close(1) = 0
open("/dev/null", O_RDONLY|O_LARGEFILE) = 0
fcntl64(0, F_SETFD, FD_CLOEXEC) = 0
close(3) = 0
close(2) = 0
close(0) = 0
exit_group(1) = ?
+++ exited with 1 +++
==> 1.28389 <==
fcntl64(0, F_SETFD, FD_CLOEXEC) = 0
close(4) = 0
close(3) = 0
close(2) = 0
close(0) = 0
write(6, "q", 1) = 1
close(-1) = -1 EBADF (Bad file descriptor)
munmap(0xb6c27000, 143360) = 0
exit_group(130) = ?
+++ exited with 130 +++
==> 1.28390 <==
set_tls(0x29268, 0x29268, 0xb6f40c60, 0x29268, 0x200) = 0
set_tid_address(0xb6f96e18) = 28390
brk(0) = 0x125d000
brk(0x1262000) = 0x1262000
mkdir("/root/.vnc/", 0777) = -1 EEXIST (File exists)
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_CONTINUE or SNDRV_TIMER_IOCTL_GPARAMS or TCSETSF,
{B38400 opost isig icanon -echo ...}) = 0
read(0, 0xb6f95e44, 1024) = -1 EIO (I/O error)
--- SIGHUP {si_signo=SIGHUP, si_code=SI_KERNEL} ---
+++ killed by SIGHUP +++
==> 1.28391 <==
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 28392
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER, 0xb6f3229c}, {0x5d550,
[], SA_RESTORER, 0xb6f3229c}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=28392,
si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, 0xbece8ebc, WNOHANG, NULL) = -1 ECHILD (No child process)
sigreturn() (mask []) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
exit_group(0) = ?
+++ exited with 0 +++
==> 1.28392 <==
close(4) = 0
execve("/bin/stty", ["/bin/stty", "sane"], [/* 42 vars */]) = 0
set_tls(0x20d25c, 0x20d25c, 0x1c1e28, 0x20d25c, 0) = 0
set_tid_address(0x20d788) = 28392
getuid32() = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_STOP or SNDRV_TIMER_IOCTL_GINFO or TCSETSW,
{B38400 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
TCGETS, {B38400 opost isig icanon echo ...}) = 0
exit_group(0) = ?
+++ exited with 0 +++
==> 1.28393 <==
read(5, "\0", 1) = 1
select(6, [5], [], [], NULL) = ? ERESTARTNOHAND (To be
restarted if no handler)
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_KILLED, si_pid=28390,
si_status=SIGHUP, si_utime=1, si_stime=1} ---
select(6, [5], [], [], NULL) = 1 (in [5])
read(5, "q", 1) = 1
close(5) = 0
rt_sigprocmask(SIG_BLOCK, ~[RTMIN 33 34], [], 8) = 0
futex(0xb6c49da0, FUTEX_WAKE_PRIVATE, 1) = 0
exit(0) = ?
+++ exited with 0 +++
With LG G3, I have a total of 6 processes instead of 5.
Strange. Anyway, the same result, blocked till ctrl-c is pressed.
CHEAPO ANDROID PHONE with linux-3.10.x:
still compiling slowly. I am going to guess I will have similar result.
If it turns out differently, I will post another message.
Since, the i686 kernel is my daily kernel, with no selinux enabled,
I am going to guess, this is not kernel related.
I have no method of getting to the bottom of this issue right now.
I am going to leave it for now.
Maybe it will go away if I use newer gcc.
I am going to test icewm and qemu first, they have only been compiled
but not tested.
>
> Rich
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [musl] Re: anyone know how to approach this problem (expect5.x.x hangs)
2022-02-27 15:35 ` naruto canada
@ 2022-02-27 21:29 ` naruto canada
2022-02-28 0:16 ` Rich Felker
0 siblings, 1 reply; 8+ messages in thread
From: naruto canada @ 2022-02-27 21:29 UTC (permalink / raw)
To: Rich Felker; +Cc: musl
On 2/27/22, naruto canada <narutocanada@gmail.com> wrote:
> On 2/26/22, Rich Felker <dalias@libc.org> wrote:
>> On Sat, Feb 26, 2022 at 02:46:10AM +0000, naruto canada wrote:
>>> On 2/25/22, Rich Felker <dalias@libc.org> wrote:
>>> > On Fri, Feb 25, 2022 at 07:35:39PM +0000, naruto canada wrote:
>>> >> On 2/25/22, naruto canada <narutocanada@gmail.com> wrote:
>>> >> > hi
>>> >> >
>>> >> > I'm in the process of porting all my desktop env. over to musl.
>>> >> > I'm about 70% done. I hit a few minor snags but got over them.
>>> >> > I had expected a lot more painful experience, but it turned out ok.
>>> >> > I could not get xserver to compile but will work around using vnc
>>> >> > for
>>> >> > now.
>>> >> > I am quite happy I got qemu to compile.
>>> >> > The last 30% (Browsers !!!), I dare not approach them right now.
>>> >> >
>>> >> > Anyway, back to my probem, expect5.x.x hangs,
>>> >> > no seg fault, so I do not know how to approach this problem.
>>> >> > normally I do a simple test:
>>> >> > expect -c "spawn ls" # this always succeeds.
>>> >> >
>>> >> > (I use expect to automate password creation)
>>> >> > VNCRP=123456 # need 6 characters # create ~/.vnc/passwd
>>> >> > echo '#!/usr/bin/expect
>>> >> > set timeout -1
>>> >> > spawn vncpasswd
>>> >> > expect "Password:"
>>> >> > send "'$VNCRP'\r"
>>> >> > expect "Verify:"
>>> >> > send "'$VNCRP'\r"
>>> >> > expect "Would you like to enter a view-only password (y/n)?"
>>> >> > send "n\r"
>>> >> > interact' > /tmp/p.ex
>>> >> > expect /tmp/p.ex
>>> >> > This script works fine under glibc, but hangs under musl.
>>> >> >
>>> >> > I've already tried the same version of expect and patches from
>>> >> > aports-3.15.0/main/expect/*.patch
>>> >> > I got the same result. (it hangs)
>>> >> >
>>> >> > This is not a priority problem for me. I can easily work around it
>>> >> > without using expect.
>>> >> > Just wondering if anyone know how to approach this problem (when
>>> >> > there
>>> >> > is no seg fault)
>>> >>
>>> >> I did a quick strace, and compare it with glibc:
>>> >> GLIBC CASE:
>>> >> ....
>>> >> open("/tmp/p.ex", O_RDONLY) = 4
>>> >> spawn vncpasswd
>>> >> open("/dev/ptmx", O_RDWR) = 4
>>> >> open("/etc/group", O_RDONLY|O_CLOEXEC) = 5
>>> >> open("/dev/pts/18", O_RDWR|O_NOCTTY) = 5
>>> >> Password:
>>> >> Verify:
>>> >> Would you like to enter a view-only password (y/n)? n
>>> >> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=956,
>>> >> si_status=0, si_utime=0, si_stime=0} ---
>>> >>
>>> >> open("/dev/null", O_RDONLY)
>>> >> = 4
>>> >> open("/dev/null", O_RDONLY) = 3
>>> >> open("/dev/null", O_RDONLY) = 2
>>> >> open("/dev/null", O_RDONLY) = 0
>>> >> +++ exited with 0 +++
>>> >>
>>> >> MUSL CASE:
>>> >> open("/tmp/p.ex", O_RDONLY|O_LARGEFILE) = 7
>>> >> spawn vncpasswd
>>> >> open("/dev/ptmx", O_RDWR|O_NOCTTY|O_LARGEFILE) = 7
>>> >> open("/dev/pts/3", O_RDWR|O_NOCTTY|O_LARGEFILE) = 8
>>> >> syscall_397(0xffffff9c, 0xb6f624e0, 0, 0x7ff, 0xbe927e48, 0xb6f624e0)
>>> >> = -1 (errno 38)
>>> >> syscall_397(0x8, 0xb6f58350, 0x1000, 0x7ff, 0xbe927e48, 0xb6f624e0) =
>>> >> -1 (errno 38)
>>> >> syscall_403(0, 0xbe928258, 0xb6e82de0, 0, 0xbe928334, 0) = -1 (errno
>>> >> 38)
>>> >> syscall_389(0x10, 0, 0, 0xb6f62170, 0xbe92815c, 0xbe92808c) = -1
>>> >> (errno
>>> >> 38)
>>> >>
>>> >> It seems to block or stopped at syscall_389
>>> >> ( arch/arm/bits/syscall.h.in:#define __NR_membarrier 389 )
>>> >
>>> > The syscall has returned, so it's something after that which is
>>> > hanging. Running under gdb and hitting ^C could show where.
>>> >
>>> > Something very wrong is going on here, since the syscalls are failing
>>> > with ENOSYS but no fallback path has been taken. If it's musl making
>>> > them, it will not assume these exist but will check for ENOSYS and
>>> > make an alternate syscall if that happens. So it would seem that
>>> > either these syscalls are being made directly by the application
>>> > (expect) or something went very wrong in building musl (weird patches?
>>> > stale build dir previously used for another arch? ..?) that has the
>>> > wrong thing happening.
>>> >
>>> > What kernel version are you using? There was a recent thread on the
>>> > list where someone had a badly patched kernel from Google that did
>>> > something to mess up ENOSYS, and strace hid the bug, so perhaps this
>>> > is similar.
>>>
>>> It is compiled on (and running on) android phone.
>>> I have no control over the kernel (3.4.0-perf-g63c3cac) (LG G3).
>>> (I have already matched kernel header (3.4.0) when compile the tool
>>> and the World)
>>> I used 3.10.x before and got into problem, so I matched the kernel
>>> header
>>> this time. This is the gdb result (I ran 3 times). It always stopped
>>> at the same place:
>>
>> The kernel headers you use should not matter at all. Do you know where
>> we can find the sources for LG's kernel? I'm guessing they did
>> something horrible...
> Actually I have downloaded the source code, but I do not know how to config
> and
> match the device tree. There is no config.gz in /proc.
> Besides, there are many variants for different countries, there is no way
> to be certain that the source file is the one that
> was built for and running on the phone.
>
> Ok, here is the results from 2 phones and i686.
> I will describe the common build script:
> To eliminate complications I switched back to musl-1.1.24.
> If there is any time64 issues this should have made it irrelevant.
> C(XX)FLAGS enforced by specs file: -ggdb -O0
> libssp enabled in gcc-5.3.0. linux-3.4 headers.
> I am also monitoring any selinux denied messages from logcat.
>
> 0. Linux localhost 4.1.49 #1 SMP Sat Feb 12 17:41:04 UTC 2022 i686
> GNU/Linux
> 1. Linux localhost 3.4.0-perf-g63c3cac #1 SMP PREEMPT Mon Nov 9
> 19:33:11 KST 2015 armv7l GNU/Linux (LG G3)
> 2. Linux localhost 3.10.49-g441c924c #1 SMP PREEMPT Mon May 16
> 19:35:10 CST 2016 armv7l GNU/Linux (Another cheap android phone but
> slightly newer kernel)
>
> i686 CASE:
> strace -f -ff -o 1 expect /tmp/p.ex
> tail 1.*
>
> ==> 1.14236 <==
> close(0) = 0
> write(6, "q", 1) = 1
> close(6) = 0
> futex(0xbf7fd53c, FUTEX_WAIT_PRIVATE, 2, NULL) = 0
> futex(0xb76cf838, FUTEX_WAIT_PRIVATE, -2147483632, NULL) = 0
> futex(0xb74dddac, FUTEX_WAIT_PRIVATE, 1, NULL) = 0
> futex(0xb77ca568, FUTEX_WAIT, 14240, NULL) = 0
> munmap(0xb74bb000, 143360) = 0
> exit_group(130) = ?
> +++ exited with 130 +++
>
> ==> 1.14237 <==
> set_thread_area({entry_number:6, base_addr:0xb76c2064, limit:1048575,
> seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1,
> seg_not_present:0, useable:1}) = 0
> set_tid_address(0xb7781568) = 14237
> brk(0) = 0x86bf000
> brk(0x86c4000) = 0x86c4000
> mkdir("/root/.vnc/", 0777) = -1 EEXIST (File exists)
> ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> TCGETS, {B115200 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_CONTINUE or SNDRV_TIMER_IOCTL_GPARAMS or TCSETSF,
> {B115200 opost isig icanon -echo ...}) = 0
> read(0, 0xb777ffe8, 1024) = -1 EIO (I/O error)
> --- SIGHUP {si_signo=SIGHUP, si_code=SI_KERNEL} ---
> +++ killed by SIGHUP +++
>
> ==> 1.14238 <==
> wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 14239
> rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER, 0xb7787836},
> {0x808c34a, [], SA_RESTORER, 0xb7787836}, 8) = 0
> rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=14239,
> si_status=0, si_utime=0, si_stime=0} ---
> wait4(-1, 0xbfb515d4, WNOHANG, NULL) = -1 ECHILD (No child process)
> sigreturn() (mask []) = 0
> rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
> rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> exit_group(0) = ?
> +++ exited with 0 +++
>
> ==> 1.14239 <==
> close(4) = 0
> execve("/bin/stty", ["/bin/stty", "sane"], [/* 40 vars */]) = 0
> set_thread_area({entry_number:-1 -> 6, base_addr:0x81d55cc,
> limit:1048575, seg_32bit:1, contents:0, read_exec_only:0,
> limit_in_pages:1, seg_not_present:0, useable:1}) = 0
> set_tid_address(0x81d5e30) = 14239
> getuid32() = 0
> ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> TCGETS, {B115200 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_STOP or SNDRV_TIMER_IOCTL_GINFO or TCSETSW,
> {B115200 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> TCGETS, {B115200 opost isig icanon echo ...}) = 0
> exit_group(0) = ?
> +++ exited with 0 +++
>
> ==> 1.14240 <==
> read(5, "\0", 1) = 1
> select(6, [5], [], [], NULL) = 1 (in [5])
> read(5, "q", 1) = 1
> close(5) = 0
> futex(0xbf7fd53c, FUTEX_WAKE_PRIVATE, 1) = 1
> futex(0xb76cf838, FUTEX_WAKE_PRIVATE, 1) = 1
> rt_sigprocmask(SIG_BLOCK, ~[RTMIN 33 34], [], 8) = 0
> futex(0xb74dddac, FUTEX_WAKE_PRIVATE, 1) = 1
> _exit(0) = ?
> +++ exited with 130 +++
>
> Total of 5 processes:
> 2 processes existed normally.
> One is killed SIGHUP (main expect script I think)
> Two existed with 130 (they are blocked by kernel till ctrl-c ?)
> So 3 processes blocked, till ctrl-c was pressed.
>
> LG.G3 CASE:
> strace -f -ff -o 1 expect /tmp/p.ex
> pstree -w
> ...
> | | \-+= 28384 root strace -f -ff -o 1 expect /tmp/p.ex
> | | \-+- 28389 root expect /tmp/p.ex
> | | \--= 28390 root vncpasswd
> ...
>
> tail 1.*
> ==> 1.27818 <==
> fcntl64(2, F_SETFD, FD_CLOEXEC) = 0
> close(0) = 0
> close(1) = 0
> open("/dev/null", O_RDONLY|O_LARGEFILE) = 0
> fcntl64(0, F_SETFD, FD_CLOEXEC) = 0
> close(3) = 0
> close(2) = 0
> close(0) = 0
> exit_group(1) = ?
> +++ exited with 1 +++
>
> ==> 1.28389 <==
> fcntl64(0, F_SETFD, FD_CLOEXEC) = 0
> close(4) = 0
> close(3) = 0
> close(2) = 0
> close(0) = 0
> write(6, "q", 1) = 1
> close(-1) = -1 EBADF (Bad file descriptor)
> munmap(0xb6c27000, 143360) = 0
> exit_group(130) = ?
> +++ exited with 130 +++
>
> ==> 1.28390 <==
> set_tls(0x29268, 0x29268, 0xb6f40c60, 0x29268, 0x200) = 0
> set_tid_address(0xb6f96e18) = 28390
> brk(0) = 0x125d000
> brk(0x1262000) = 0x1262000
> mkdir("/root/.vnc/", 0777) = -1 EEXIST (File exists)
> ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> TCGETS, {B38400 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_CONTINUE or SNDRV_TIMER_IOCTL_GPARAMS or TCSETSF,
> {B38400 opost isig icanon -echo ...}) = 0
> read(0, 0xb6f95e44, 1024) = -1 EIO (I/O error)
> --- SIGHUP {si_signo=SIGHUP, si_code=SI_KERNEL} ---
> +++ killed by SIGHUP +++
>
> ==> 1.28391 <==
> wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 28392
> rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER, 0xb6f3229c}, {0x5d550,
> [], SA_RESTORER, 0xb6f3229c}, 8) = 0
> rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=28392,
> si_status=0, si_utime=0, si_stime=0} ---
> wait4(-1, 0xbece8ebc, WNOHANG, NULL) = -1 ECHILD (No child process)
> sigreturn() (mask []) = 0
> rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
> rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> exit_group(0) = ?
> +++ exited with 0 +++
>
> ==> 1.28392 <==
> close(4) = 0
> execve("/bin/stty", ["/bin/stty", "sane"], [/* 42 vars */]) = 0
> set_tls(0x20d25c, 0x20d25c, 0x1c1e28, 0x20d25c, 0) = 0
> set_tid_address(0x20d788) = 28392
> getuid32() = 0
> ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> TCGETS, {B38400 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_STOP or SNDRV_TIMER_IOCTL_GINFO or TCSETSW,
> {B38400 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> TCGETS, {B38400 opost isig icanon echo ...}) = 0
> exit_group(0) = ?
> +++ exited with 0 +++
>
> ==> 1.28393 <==
> read(5, "\0", 1) = 1
> select(6, [5], [], [], NULL) = ? ERESTARTNOHAND (To be
> restarted if no handler)
> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_KILLED, si_pid=28390,
> si_status=SIGHUP, si_utime=1, si_stime=1} ---
> select(6, [5], [], [], NULL) = 1 (in [5])
> read(5, "q", 1) = 1
> close(5) = 0
> rt_sigprocmask(SIG_BLOCK, ~[RTMIN 33 34], [], 8) = 0
> futex(0xb6c49da0, FUTEX_WAKE_PRIVATE, 1) = 0
> exit(0) = ?
> +++ exited with 0 +++
>
> With LG G3, I have a total of 6 processes instead of 5.
> Strange. Anyway, the same result, blocked till ctrl-c is pressed.
>
> CHEAPO ANDROID PHONE with linux-3.10.x:
> still compiling slowly. I am going to guess I will have similar result.
> If it turns out differently, I will post another message.
It turns out, I was over thinking the problem, thinking
maybe it is something buried deep. The problem was not "expect" but
the program "vncpasswd". I manually tried the program and it behaved
differently when compiled with musl. For some reason, it failed to flush
the prompt to the user, and "expect" was waiting forever instead.
I am not sure if this is correct fix for tigervnc-1.7.1, it works around
no prompt on my system:
sed -i.bak "s/\(fputs(prompt, stdout)\)/\1;fflush(stdout)/"
unix/vncpasswd/vncpasswd.cxx
>
> Since, the i686 kernel is my daily kernel, with no selinux enabled,
> I am going to guess, this is not kernel related.
> I have no method of getting to the bottom of this issue right now.
> I am going to leave it for now.
> Maybe it will go away if I use newer gcc.
>
> I am going to test icewm and qemu first, they have only been compiled
> but not tested.
>
>>
>> Rich
>>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [musl] Re: anyone know how to approach this problem (expect5.x.x hangs)
2022-02-27 21:29 ` naruto canada
@ 2022-02-28 0:16 ` Rich Felker
0 siblings, 0 replies; 8+ messages in thread
From: Rich Felker @ 2022-02-28 0:16 UTC (permalink / raw)
To: naruto canada; +Cc: musl
On Sun, Feb 27, 2022 at 09:29:49PM +0000, naruto canada wrote:
> On 2/27/22, naruto canada <narutocanada@gmail.com> wrote:
> > On 2/26/22, Rich Felker <dalias@libc.org> wrote:
> >> On Sat, Feb 26, 2022 at 02:46:10AM +0000, naruto canada wrote:
> >>> On 2/25/22, Rich Felker <dalias@libc.org> wrote:
> >>> > On Fri, Feb 25, 2022 at 07:35:39PM +0000, naruto canada wrote:
> >>> >> On 2/25/22, naruto canada <narutocanada@gmail.com> wrote:
> >>> >> > hi
> >>> >> >
> >>> >> > I'm in the process of porting all my desktop env. over to musl.
> >>> >> > I'm about 70% done. I hit a few minor snags but got over them.
> >>> >> > I had expected a lot more painful experience, but it turned out ok.
> >>> >> > I could not get xserver to compile but will work around using vnc
> >>> >> > for
> >>> >> > now.
> >>> >> > I am quite happy I got qemu to compile.
> >>> >> > The last 30% (Browsers !!!), I dare not approach them right now.
> >>> >> >
> >>> >> > Anyway, back to my probem, expect5.x.x hangs,
> >>> >> > no seg fault, so I do not know how to approach this problem.
> >>> >> > normally I do a simple test:
> >>> >> > expect -c "spawn ls" # this always succeeds.
> >>> >> >
> >>> >> > (I use expect to automate password creation)
> >>> >> > VNCRP=123456 # need 6 characters # create ~/.vnc/passwd
> >>> >> > echo '#!/usr/bin/expect
> >>> >> > set timeout -1
> >>> >> > spawn vncpasswd
> >>> >> > expect "Password:"
> >>> >> > send "'$VNCRP'\r"
> >>> >> > expect "Verify:"
> >>> >> > send "'$VNCRP'\r"
> >>> >> > expect "Would you like to enter a view-only password (y/n)?"
> >>> >> > send "n\r"
> >>> >> > interact' > /tmp/p.ex
> >>> >> > expect /tmp/p.ex
> >>> >> > This script works fine under glibc, but hangs under musl.
> >>> >> >
> >>> >> > I've already tried the same version of expect and patches from
> >>> >> > aports-3.15.0/main/expect/*.patch
> >>> >> > I got the same result. (it hangs)
> >>> >> >
> >>> >> > This is not a priority problem for me. I can easily work around it
> >>> >> > without using expect.
> >>> >> > Just wondering if anyone know how to approach this problem (when
> >>> >> > there
> >>> >> > is no seg fault)
> >>> >>
> >>> >> I did a quick strace, and compare it with glibc:
> >>> >> GLIBC CASE:
> >>> >> ....
> >>> >> open("/tmp/p.ex", O_RDONLY) = 4
> >>> >> spawn vncpasswd
> >>> >> open("/dev/ptmx", O_RDWR) = 4
> >>> >> open("/etc/group", O_RDONLY|O_CLOEXEC) = 5
> >>> >> open("/dev/pts/18", O_RDWR|O_NOCTTY) = 5
> >>> >> Password:
> >>> >> Verify:
> >>> >> Would you like to enter a view-only password (y/n)? n
> >>> >> --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=956,
> >>> >> si_status=0, si_utime=0, si_stime=0} ---
> >>> >>
> >>> >> open("/dev/null", O_RDONLY)
> >>> >> = 4
> >>> >> open("/dev/null", O_RDONLY) = 3
> >>> >> open("/dev/null", O_RDONLY) = 2
> >>> >> open("/dev/null", O_RDONLY) = 0
> >>> >> +++ exited with 0 +++
> >>> >>
> >>> >> MUSL CASE:
> >>> >> open("/tmp/p.ex", O_RDONLY|O_LARGEFILE) = 7
> >>> >> spawn vncpasswd
> >>> >> open("/dev/ptmx", O_RDWR|O_NOCTTY|O_LARGEFILE) = 7
> >>> >> open("/dev/pts/3", O_RDWR|O_NOCTTY|O_LARGEFILE) = 8
> >>> >> syscall_397(0xffffff9c, 0xb6f624e0, 0, 0x7ff, 0xbe927e48, 0xb6f624e0)
> >>> >> = -1 (errno 38)
> >>> >> syscall_397(0x8, 0xb6f58350, 0x1000, 0x7ff, 0xbe927e48, 0xb6f624e0) =
> >>> >> -1 (errno 38)
> >>> >> syscall_403(0, 0xbe928258, 0xb6e82de0, 0, 0xbe928334, 0) = -1 (errno
> >>> >> 38)
> >>> >> syscall_389(0x10, 0, 0, 0xb6f62170, 0xbe92815c, 0xbe92808c) = -1
> >>> >> (errno
> >>> >> 38)
> >>> >>
> >>> >> It seems to block or stopped at syscall_389
> >>> >> ( arch/arm/bits/syscall.h.in:#define __NR_membarrier 389 )
> >>> >
> >>> > The syscall has returned, so it's something after that which is
> >>> > hanging. Running under gdb and hitting ^C could show where.
> >>> >
> >>> > Something very wrong is going on here, since the syscalls are failing
> >>> > with ENOSYS but no fallback path has been taken. If it's musl making
> >>> > them, it will not assume these exist but will check for ENOSYS and
> >>> > make an alternate syscall if that happens. So it would seem that
> >>> > either these syscalls are being made directly by the application
> >>> > (expect) or something went very wrong in building musl (weird patches?
> >>> > stale build dir previously used for another arch? ..?) that has the
> >>> > wrong thing happening.
> >>> >
> >>> > What kernel version are you using? There was a recent thread on the
> >>> > list where someone had a badly patched kernel from Google that did
> >>> > something to mess up ENOSYS, and strace hid the bug, so perhaps this
> >>> > is similar.
> >>>
> >>> It is compiled on (and running on) android phone.
> >>> I have no control over the kernel (3.4.0-perf-g63c3cac) (LG G3).
> >>> (I have already matched kernel header (3.4.0) when compile the tool
> >>> and the World)
> >>> I used 3.10.x before and got into problem, so I matched the kernel
> >>> header
> >>> this time. This is the gdb result (I ran 3 times). It always stopped
> >>> at the same place:
> >>
> >> The kernel headers you use should not matter at all. Do you know where
> >> we can find the sources for LG's kernel? I'm guessing they did
> >> something horrible...
> > Actually I have downloaded the source code, but I do not know how to config
> > and
> > match the device tree. There is no config.gz in /proc.
> > Besides, there are many variants for different countries, there is no way
> > to be certain that the source file is the one that
> > was built for and running on the phone.
> >
> > Ok, here is the results from 2 phones and i686.
> > I will describe the common build script:
> > To eliminate complications I switched back to musl-1.1.24.
> > If there is any time64 issues this should have made it irrelevant.
> > C(XX)FLAGS enforced by specs file: -ggdb -O0
> > libssp enabled in gcc-5.3.0. linux-3.4 headers.
> > I am also monitoring any selinux denied messages from logcat.
> >
> > 0. Linux localhost 4.1.49 #1 SMP Sat Feb 12 17:41:04 UTC 2022 i686
> > GNU/Linux
> > 1. Linux localhost 3.4.0-perf-g63c3cac #1 SMP PREEMPT Mon Nov 9
> > 19:33:11 KST 2015 armv7l GNU/Linux (LG G3)
> > 2. Linux localhost 3.10.49-g441c924c #1 SMP PREEMPT Mon May 16
> > 19:35:10 CST 2016 armv7l GNU/Linux (Another cheap android phone but
> > slightly newer kernel)
> >
> > i686 CASE:
> > strace -f -ff -o 1 expect /tmp/p.ex
> > tail 1.*
> >
> > ==> 1.14236 <==
> > close(0) = 0
> > write(6, "q", 1) = 1
> > close(6) = 0
> > futex(0xbf7fd53c, FUTEX_WAIT_PRIVATE, 2, NULL) = 0
> > futex(0xb76cf838, FUTEX_WAIT_PRIVATE, -2147483632, NULL) = 0
> > futex(0xb74dddac, FUTEX_WAIT_PRIVATE, 1, NULL) = 0
> > futex(0xb77ca568, FUTEX_WAIT, 14240, NULL) = 0
> > munmap(0xb74bb000, 143360) = 0
> > exit_group(130) = ?
> > +++ exited with 130 +++
> >
> > ==> 1.14237 <==
> > set_thread_area({entry_number:6, base_addr:0xb76c2064, limit:1048575,
> > seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1,
> > seg_not_present:0, useable:1}) = 0
> > set_tid_address(0xb7781568) = 14237
> > brk(0) = 0x86bf000
> > brk(0x86c4000) = 0x86c4000
> > mkdir("/root/.vnc/", 0777) = -1 EEXIST (File exists)
> > ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> > TCGETS, {B115200 opost isig icanon echo ...}) = 0
> > ioctl(0, SNDCTL_TMR_CONTINUE or SNDRV_TIMER_IOCTL_GPARAMS or TCSETSF,
> > {B115200 opost isig icanon -echo ...}) = 0
> > read(0, 0xb777ffe8, 1024) = -1 EIO (I/O error)
> > --- SIGHUP {si_signo=SIGHUP, si_code=SI_KERNEL} ---
> > +++ killed by SIGHUP +++
> >
> > ==> 1.14238 <==
> > wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 14239
> > rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER, 0xb7787836},
> > {0x808c34a, [], SA_RESTORER, 0xb7787836}, 8) = 0
> > rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> > --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=14239,
> > si_status=0, si_utime=0, si_stime=0} ---
> > wait4(-1, 0xbfb515d4, WNOHANG, NULL) = -1 ECHILD (No child process)
> > sigreturn() (mask []) = 0
> > rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
> > rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> > exit_group(0) = ?
> > +++ exited with 0 +++
> >
> > ==> 1.14239 <==
> > close(4) = 0
> > execve("/bin/stty", ["/bin/stty", "sane"], [/* 40 vars */]) = 0
> > set_thread_area({entry_number:-1 -> 6, base_addr:0x81d55cc,
> > limit:1048575, seg_32bit:1, contents:0, read_exec_only:0,
> > limit_in_pages:1, seg_not_present:0, useable:1}) = 0
> > set_tid_address(0x81d5e30) = 14239
> > getuid32() = 0
> > ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> > TCGETS, {B115200 opost isig icanon echo ...}) = 0
> > ioctl(0, SNDCTL_TMR_STOP or SNDRV_TIMER_IOCTL_GINFO or TCSETSW,
> > {B115200 opost isig icanon echo ...}) = 0
> > ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> > TCGETS, {B115200 opost isig icanon echo ...}) = 0
> > exit_group(0) = ?
> > +++ exited with 0 +++
> >
> > ==> 1.14240 <==
> > read(5, "\0", 1) = 1
> > select(6, [5], [], [], NULL) = 1 (in [5])
> > read(5, "q", 1) = 1
> > close(5) = 0
> > futex(0xbf7fd53c, FUTEX_WAKE_PRIVATE, 1) = 1
> > futex(0xb76cf838, FUTEX_WAKE_PRIVATE, 1) = 1
> > rt_sigprocmask(SIG_BLOCK, ~[RTMIN 33 34], [], 8) = 0
> > futex(0xb74dddac, FUTEX_WAKE_PRIVATE, 1) = 1
> > _exit(0) = ?
> > +++ exited with 130 +++
> >
> > Total of 5 processes:
> > 2 processes existed normally.
> > One is killed SIGHUP (main expect script I think)
> > Two existed with 130 (they are blocked by kernel till ctrl-c ?)
> > So 3 processes blocked, till ctrl-c was pressed.
> >
> > LG.G3 CASE:
> > strace -f -ff -o 1 expect /tmp/p.ex
> > pstree -w
> > ...
> > | | \-+= 28384 root strace -f -ff -o 1 expect /tmp/p.ex
> > | | \-+- 28389 root expect /tmp/p.ex
> > | | \--= 28390 root vncpasswd
> > ...
> >
> > tail 1.*
> > ==> 1.27818 <==
> > fcntl64(2, F_SETFD, FD_CLOEXEC) = 0
> > close(0) = 0
> > close(1) = 0
> > open("/dev/null", O_RDONLY|O_LARGEFILE) = 0
> > fcntl64(0, F_SETFD, FD_CLOEXEC) = 0
> > close(3) = 0
> > close(2) = 0
> > close(0) = 0
> > exit_group(1) = ?
> > +++ exited with 1 +++
> >
> > ==> 1.28389 <==
> > fcntl64(0, F_SETFD, FD_CLOEXEC) = 0
> > close(4) = 0
> > close(3) = 0
> > close(2) = 0
> > close(0) = 0
> > write(6, "q", 1) = 1
> > close(-1) = -1 EBADF (Bad file descriptor)
> > munmap(0xb6c27000, 143360) = 0
> > exit_group(130) = ?
> > +++ exited with 130 +++
> >
> > ==> 1.28390 <==
> > set_tls(0x29268, 0x29268, 0xb6f40c60, 0x29268, 0x200) = 0
> > set_tid_address(0xb6f96e18) = 28390
> > brk(0) = 0x125d000
> > brk(0x1262000) = 0x1262000
> > mkdir("/root/.vnc/", 0777) = -1 EEXIST (File exists)
> > ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> > TCGETS, {B38400 opost isig icanon echo ...}) = 0
> > ioctl(0, SNDCTL_TMR_CONTINUE or SNDRV_TIMER_IOCTL_GPARAMS or TCSETSF,
> > {B38400 opost isig icanon -echo ...}) = 0
> > read(0, 0xb6f95e44, 1024) = -1 EIO (I/O error)
> > --- SIGHUP {si_signo=SIGHUP, si_code=SI_KERNEL} ---
> > +++ killed by SIGHUP +++
> >
> > ==> 1.28391 <==
> > wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 28392
> > rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER, 0xb6f3229c}, {0x5d550,
> > [], SA_RESTORER, 0xb6f3229c}, 8) = 0
> > rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> > --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=28392,
> > si_status=0, si_utime=0, si_stime=0} ---
> > wait4(-1, 0xbece8ebc, WNOHANG, NULL) = -1 ECHILD (No child process)
> > sigreturn() (mask []) = 0
> > rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
> > rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> > exit_group(0) = ?
> > +++ exited with 0 +++
> >
> > ==> 1.28392 <==
> > close(4) = 0
> > execve("/bin/stty", ["/bin/stty", "sane"], [/* 42 vars */]) = 0
> > set_tls(0x20d25c, 0x20d25c, 0x1c1e28, 0x20d25c, 0) = 0
> > set_tid_address(0x20d788) = 28392
> > getuid32() = 0
> > ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> > TCGETS, {B38400 opost isig icanon echo ...}) = 0
> > ioctl(0, SNDCTL_TMR_STOP or SNDRV_TIMER_IOCTL_GINFO or TCSETSW,
> > {B38400 opost isig icanon echo ...}) = 0
> > ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or
> > TCGETS, {B38400 opost isig icanon echo ...}) = 0
> > exit_group(0) = ?
> > +++ exited with 0 +++
> >
> > ==> 1.28393 <==
> > read(5, "\0", 1) = 1
> > select(6, [5], [], [], NULL) = ? ERESTARTNOHAND (To be
> > restarted if no handler)
> > --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_KILLED, si_pid=28390,
> > si_status=SIGHUP, si_utime=1, si_stime=1} ---
> > select(6, [5], [], [], NULL) = 1 (in [5])
> > read(5, "q", 1) = 1
> > close(5) = 0
> > rt_sigprocmask(SIG_BLOCK, ~[RTMIN 33 34], [], 8) = 0
> > futex(0xb6c49da0, FUTEX_WAKE_PRIVATE, 1) = 0
> > exit(0) = ?
> > +++ exited with 0 +++
> >
> > With LG G3, I have a total of 6 processes instead of 5.
> > Strange. Anyway, the same result, blocked till ctrl-c is pressed.
> >
> > CHEAPO ANDROID PHONE with linux-3.10.x:
> > still compiling slowly. I am going to guess I will have similar result.
> > If it turns out differently, I will post another message.
>
> It turns out, I was over thinking the problem, thinking
> maybe it is something buried deep. The problem was not "expect" but
> the program "vncpasswd". I manually tried the program and it behaved
> differently when compiled with musl. For some reason, it failed to flush
> the prompt to the user, and "expect" was waiting forever instead.
> I am not sure if this is correct fix for tigervnc-1.7.1, it works around
> no prompt on my system:
> sed -i.bak "s/\(fputs(prompt, stdout)\)/\1;fflush(stdout)/"
> unix/vncpasswd/vncpasswd.cxx
Yes, that's the right fix.
Rich
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-02-28 0:16 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-25 17:59 [musl] anyone know how to approach this problem (expect5.x.x hangs) naruto canada
2022-02-25 19:35 ` [musl] " naruto canada
2022-02-25 23:32 ` Rich Felker
2022-02-26 2:46 ` naruto canada
2022-02-26 13:48 ` Rich Felker
2022-02-27 15:35 ` naruto canada
2022-02-27 21:29 ` naruto canada
2022-02-28 0:16 ` Rich Felker
Code repositories for project(s) associated with this public inbox
https://git.vuxu.org/mirror/musl/
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).