* probably well known problem
@ 2003-09-20 17:08 Pawel Jackowski na Onet
2003-09-21 8:34 ` K.H. Wesseling
0 siblings, 1 reply; 7+ messages in thread
From: Pawel Jackowski na Onet @ 2003-09-20 17:08 UTC (permalink / raw)
Hi all!
I've just finished (?) reinstalling and configuring my TeX system. It is
quite small conglomerate of cont-bas, cont-tmf and my own packages. I've
successfully generated all formats using fmtutil. However I
have some troubles with 'cont-en'; it was successfully generated but do not
work properly. I tried to do that also with texexec 'shell'.
I need pl language hyphenation patterns as a default and for some cases also
en and de. That's why I uncommented following lines in cont-usr.tex file:
...
\installlanguage [\s!de] [\c!status=\v!start]
\installlanguage [\s!en] [\c!status=\v!start]
\installlanguage [\s!pl] [\c!status=\v!start]
...
\setupcurrentlanguage[\s!pl]
\definefilesynonym [font-cmr] [font-plr]
% \useencoding[fde] % commented by me
\useencoding[fpl]
...
After these changes I generated format with command
texexec --make --language=pl,en,de --bodyfont=plr en
Log file (cont-fmt):
\unprotect
\installlanguage[\s!pl][\c!status=\v!start]
\installlanguage[\s!en][\c!status=\v!start]
\installlanguage[\s!de][\c!status=\v!start]
\setupcurrentlanguage[\s!pl]
\definetypescriptsynonym[cmr][plr]\definefilesynonym[font-cmr][font-plr]
\protect
\endinput
Is it correct?
After that I expect format with following features:
-- interface: english
-- default language: polish
-- other languages (activated by \language[??]): en,de
-- default font: plr
The problem is that default font is still CMR and I want to use PLR. What is
wrong? What should I do?
Oh by the way, I recomend you cont-bas package; tidy, small and complete.
Regards, Pawe/l
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: probably well known problem
2003-09-20 17:08 probably well known problem Pawel Jackowski na Onet
@ 2003-09-21 8:34 ` K.H. Wesseling
2003-09-21 15:54 ` Pawel Jackowski na Onet
0 siblings, 1 reply; 7+ messages in thread
From: K.H. Wesseling @ 2003-09-21 8:34 UTC (permalink / raw)
You might try
texexec --make --language=pl,en,de --bodyfont=plr en
from the texexec manual.
Best succes...Karel
> Hi all!
>
> I've just finished (?) reinstalling and configuring my TeX system. It
> is quite small conglomerate of cont-bas, cont-tmf and my own packages.
> I've successfully generated all formats using fmtutil. However I have
> some troubles with 'cont-en'; it was successfully generated but do not
> work properly. I tried to do that also with texexec 'shell'.
>
> I need pl language hyphenation patterns as a default and for some
> cases also en and de. That's why I uncommented following lines in
> cont-usr.tex file: ...
> \installlanguage [\s!de] [\c!status=\v!start]
> \installlanguage [\s!en] [\c!status=\v!start]
> \installlanguage [\s!pl] [\c!status=\v!start]
> ...
> \setupcurrentlanguage[\s!pl]
> \definefilesynonym [font-cmr] [font-plr]
> % \useencoding[fde] % commented by me
> \useencoding[fpl]
> ...
>
> After these changes I generated format with command
>
> texexec --make --language=pl,en,de --bodyfont=plr en
>
> Log file (cont-fmt):
>
> \unprotect
> \installlanguage[\s!pl][\c!status=\v!start]
> \installlanguage[\s!en][\c!status=\v!start]
> \installlanguage[\s!de][\c!status=\v!start]
> \setupcurrentlanguage[\s!pl]
> \definetypescriptsynonym[cmr][plr]\definefilesynonym[font-cmr][font-pl
> r] \protect \endinput
>
> Is it correct?
>
> After that I expect format with following features:
> -- interface: english
> -- default language: polish
> -- other languages (activated by \language[??]): en,de
> -- default font: plr
>
> The problem is that default font is still CMR and I want to use PLR.
> What is wrong? What should I do?
>
> Oh by the way, I recomend you cont-bas package; tidy, small and
> complete.
>
>
> Regards, Pawe/l
>
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: probably well known problem
2003-09-21 8:34 ` K.H. Wesseling
@ 2003-09-21 15:54 ` Pawel Jackowski na Onet
2003-09-21 18:23 ` K.H. Wesseling
0 siblings, 1 reply; 7+ messages in thread
From: Pawel Jackowski na Onet @ 2003-09-21 15:54 UTC (permalink / raw)
> You might try
>
> texexec --make --language=pl,en,de --bodyfont=plr en
>
> from the texexec manual.
>
> Best succes...Karel
Thanks, but You probably haven't read my letter to the end. I wrote:
> > After these changes I generated format with command
> >
> > texexec --make --language=pl,en,de --bodyfont=plr en
And than I wrote that it was not the solution.
I respect ntg-list and always try to ask the manual first :)
>
> > Hi all!
> >
> > I've just finished (?) reinstalling and configuring my TeX system. It
> > is quite small conglomerate of cont-bas, cont-tmf and my own packages.
> > I've successfully generated all formats using fmtutil. However I have
> > some troubles with 'cont-en'; it was successfully generated but do not
> > work properly. I tried to do that also with texexec 'shell'.
> >
> > I need pl language hyphenation patterns as a default and for some
> > cases also en and de. That's why I uncommented following lines in
> > cont-usr.tex file: ...
> > \installlanguage [\s!de] [\c!status=\v!start]
> > \installlanguage [\s!en] [\c!status=\v!start]
> > \installlanguage [\s!pl] [\c!status=\v!start]
> > ...
> > \setupcurrentlanguage[\s!pl]
> > \definefilesynonym [font-cmr] [font-plr]
> > % \useencoding[fde] % commented by me
> > \useencoding[fpl]
> > ...
> >
> > After these changes I generated format with command
> >
> > texexec --make --language=pl,en,de --bodyfont=plr en
> >
> > Log file (cont-fmt):
> >
> > \unprotect
> > \installlanguage[\s!pl][\c!status=\v!start]
> > \installlanguage[\s!en][\c!status=\v!start]
> > \installlanguage[\s!de][\c!status=\v!start]
> > \setupcurrentlanguage[\s!pl]
> > \definetypescriptsynonym[cmr][plr]\definefilesynonym[font-cmr][font-pl
> > r] \protect \endinput
> >
> > Is it correct?
> >
> > After that I expect format with following features:
> > -- interface: english
> > -- default language: polish
> > -- other languages (activated by \language[??]): en,de
> > -- default font: plr
> >
> > The problem is that default font is still CMR and I want to use PLR.
> > What is wrong? What should I do?
> >
> > Oh by the way, I recomend you cont-bas package; tidy, small and
> > complete.
> >
> >
> > Regards, Pawe/l
> >
> >
> > _______________________________________________
> > ntg-context mailing list
> > ntg-context@ntg.nl
> > http://www.ntg.nl/mailman/listinfo/ntg-context
> >
>
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: probably well known problem
2003-09-21 15:54 ` Pawel Jackowski na Onet
@ 2003-09-21 18:23 ` K.H. Wesseling
2003-09-21 19:30 ` Pawel Jackowski na Onet
0 siblings, 1 reply; 7+ messages in thread
From: K.H. Wesseling @ 2003-09-21 18:23 UTC (permalink / raw)
I am sorry to have irritated you. I read this list and in most cases
don't even understand the questions. In this particular case I
recognized a question since I assembled a beginners texexec manual a
few years ago with Hans. That's why I added from the manual to
indicate that it is not my own knowledge, with no intention to imply
that you don't do your reading. Karel.
> > You might try
> >
> > texexec --make --language=pl,en,de --bodyfont=plr en
> >
> > from the texexec manual.
> >
> > Best succes...Karel
>
> Thanks, but You probably haven't read my letter to the end. I wrote:
>
> > > After these changes I generated format with command
> > >
> > > texexec --make --language=pl,en,de --bodyfont=plr en
>
> And than I wrote that it was not the solution.
> I respect ntg-list and always try to ask the manual first :)
>
> >
> > > Hi all!
> > >
> > > I've just finished (?) reinstalling and configuring my TeX system.
> > > It is quite small conglomerate of cont-bas, cont-tmf and my own
> > > packages. I've successfully generated all formats using fmtutil.
> > > However I have some troubles with 'cont-en'; it was successfully
> > > generated but do not work properly. I tried to do that also with
> > > texexec 'shell'.
> > >
> > > I need pl language hyphenation patterns as a default and for some
> > > cases also en and de. That's why I uncommented following lines in
> > > cont-usr.tex file: ...
> > > \installlanguage [\s!de] [\c!status=\v!start]
> > > \installlanguage [\s!en] [\c!status=\v!start]
> > > \installlanguage [\s!pl] [\c!status=\v!start]
> > > ...
> > > \setupcurrentlanguage[\s!pl]
> > > \definefilesynonym [font-cmr] [font-plr]
> > > % \useencoding[fde] % commented by me
> > > \useencoding[fpl]
> > > ...
> > >
> > > After these changes I generated format with command
> > >
> > > texexec --make --language=pl,en,de --bodyfont=plr en
> > >
> > > Log file (cont-fmt):
> > >
> > > \unprotect
> > > \installlanguage[\s!pl][\c!status=\v!start]
> > > \installlanguage[\s!en][\c!status=\v!start]
> > > \installlanguage[\s!de][\c!status=\v!start]
> > > \setupcurrentlanguage[\s!pl]
> > > \definetypescriptsynonym[cmr][plr]\definefilesynonym[font-cmr][fon
> > > t-pl r] \protect \endinput
> > >
> > > Is it correct?
> > >
> > > After that I expect format with following features:
> > > -- interface: english
> > > -- default language: polish
> > > -- other languages (activated by \language[??]): en,de
> > > -- default font: plr
> > >
> > > The problem is that default font is still CMR and I want to use
> > > PLR. What is wrong? What should I do?
> > >
> > > Oh by the way, I recomend you cont-bas package; tidy, small and
> > > complete.
> > >
> > >
> > > Regards, Pawe/l
> > >
> > >
> > > _______________________________________________
> > > ntg-context mailing list
> > > ntg-context@ntg.nl
> > > http://www.ntg.nl/mailman/listinfo/ntg-context
> > >
> >
> >
> > _______________________________________________
> > ntg-context mailing list
> > ntg-context@ntg.nl
> > http://www.ntg.nl/mailman/listinfo/ntg-context
> >
>
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: probably well known problem
2003-09-21 18:23 ` K.H. Wesseling
@ 2003-09-21 19:30 ` Pawel Jackowski na Onet
2003-09-23 21:48 ` Hans Hagen
0 siblings, 1 reply; 7+ messages in thread
From: Pawel Jackowski na Onet @ 2003-09-21 19:30 UTC (permalink / raw)
Hi Karel!
"K.H. Wesseling" <k.h.wesseling@planet.nl> wrote:
> I am sorry to have irritated you[...]
You didn't at all so let's forget about it. I'm aware that answering silly
questions isn't easy...
I'm also aware that asking silly questions with counsiousness that they are
silly is also hard.
The hardest for squealers is to ask questions and show that they aren't so
silly as they look like (:
Best regards, squealer Pawe/l
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: probably well known problem
2003-09-21 19:30 ` Pawel Jackowski na Onet
@ 2003-09-23 21:48 ` Hans Hagen
2003-09-24 5:53 ` is / notation (similar to german active ") still being Pawel Jackowski na Onet
0 siblings, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2003-09-23 21:48 UTC (permalink / raw)
At 21:30 21/09/2003 +0200, you wrote:
>Best regards, squealer Pawe/l
just curious, is this / notation (similar to german active ") still being
used in poland (and tex)?
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
information: http://www.pragma-ade.com/roadmap.pdf
documentation: http://www.pragma-ade.com/showcase.pdf
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: is / notation (similar to german active ") still being...
2003-09-23 21:48 ` Hans Hagen
@ 2003-09-24 5:53 ` Pawel Jackowski na Onet
0 siblings, 0 replies; 7+ messages in thread
From: Pawel Jackowski na Onet @ 2003-09-24 5:53 UTC (permalink / raw)
Cc: jackowski boguslaw
"Hans Hagen" <pragma@wxs.nl> wrote:
> At 21:30 21/09/2003 +0200, you wrote:
>
> >Best regards, squealer Pawe/l
>
> just curious, is this / notation (similar to german active ") still being
> used in poland (and tex)?
>
> Hans
Some Poles use \prefixing (MeX command which activate / notation) but it is
not common. I use it for exchanging i.e sample files with other Poles to
ensure that they will not be confused about encoding I send them. It is also
usefull for those who don't use/like TCX tables. Anyway / notation is
neither confortable for writing nor for reading but using it is to be on
safe side.
Regards
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-09-24 5:53 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-20 17:08 probably well known problem Pawel Jackowski na Onet
2003-09-21 8:34 ` K.H. Wesseling
2003-09-21 15:54 ` Pawel Jackowski na Onet
2003-09-21 18:23 ` K.H. Wesseling
2003-09-21 19:30 ` Pawel Jackowski na Onet
2003-09-23 21:48 ` Hans Hagen
2003-09-24 5:53 ` is / notation (similar to german active ") still being Pawel Jackowski na Onet
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).