* letter module
@ 2008-08-13 13:34 Roger Mason
2008-08-13 13:51 ` Wolfgang Schuster
0 siblings, 1 reply; 9+ messages in thread
From: Roger Mason @ 2008-08-13 13:34 UTC (permalink / raw)
To: ntg-context
Hello,
I just downloaded the letter module and installed it by unzipping the
t-letter.zip file into /usr/local/context_minimal/.
When I try a test letter:
\usemodule[letter]
\starttext
\startletter
It is raining again.
\stopletter
\stoptext
context fails with:
systems : system commands are enabled
system : module letter not found
(/usr/local/context_minimal/tex/texmf-local/tex/context/base/sort-lan.tex
loading : Context Sorting Macros (languages)
(/usr/local/context_minimal/tex/texmf-local/tex/context/base/sort-lan.mkii))
(/usr/local/context_minimal/tex/texmf-local/tex/context/base/pdfr-def.tex)
systems : begin file ltrtest at line 3
! Undefined control sequence.
l.4 \startletter
?
The log file tells me
"ConTeXt ver: 2007.08.08 14:35 MKII fmt: 2008.5.6 int:
english/english"
This is on a Gentoo Linux system.
Thanks for any help,
Roger
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: letter module
2008-08-13 13:34 letter module Roger Mason
@ 2008-08-13 13:51 ` Wolfgang Schuster
2008-08-14 10:02 ` Roger Mason
0 siblings, 1 reply; 9+ messages in thread
From: Wolfgang Schuster @ 2008-08-13 13:51 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Wed, Aug 13, 2008 at 3:34 PM, Roger Mason <rmason@esd.mun.ca> wrote:
> Hello,
>
> I just downloaded the letter module and installed it by unzipping the
> t-letter.zip file into /usr/local/context_minimal/.
>
> When I try a test letter:
>
> \usemodule[letter]
>
> \starttext
> \startletter
> It is raining again.
> \stopletter
> \stoptext
>
> context fails with:
>
> systems : system commands are enabled
> system : module letter not found
> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/sort-lan.tex
> loading : Context Sorting Macros (languages)
> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/sort-lan.mkii))
> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/pdfr-def.tex)
> systems : begin file ltrtest at line 3
> ! Undefined control sequence.
> l.4 \startletter
>
> ?
>
> The log file tells me
>
> "ConTeXt ver: 2007.08.08 14:35 MKII fmt: 2008.5.6 int:
> english/english"
>
> This is on a Gentoo Linux system.
Update the file database with 'mktexlsr' or 'texhash'.
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: letter module
2008-08-13 13:51 ` Wolfgang Schuster
@ 2008-08-14 10:02 ` Roger Mason
2008-08-14 13:32 ` Wolfgang Schuster
0 siblings, 1 reply; 9+ messages in thread
From: Roger Mason @ 2008-08-14 10:02 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi Wolfgang,
"Wolfgang Schuster" <schuster.wolfgang@googlemail.com> writes:
> On Wed, Aug 13, 2008 at 3:34 PM, Roger Mason <rmason@esd.mun.ca> wrote:
>> Hello,
>>
>> I just downloaded the letter module and installed it by unzipping the
>> t-letter.zip file into /usr/local/context_minimal/.
>>
>> When I try a test letter:
>>
>> \usemodule[letter]
>>
>> \starttext
>> \startletter
>> It is raining again.
>> \stopletter
>> \stoptext
>>
>> context fails with:
>>
>> systems : system commands are enabled
>> system : module letter not found
>> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/sort-lan.tex
>> loading : Context Sorting Macros (languages)
>> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/sort-lan.mkii))
>> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/pdfr-def.tex)
>> systems : begin file ltrtest at line 3
>> ! Undefined control sequence.
>> l.4 \startletter
>>
>> ?
>>
>> The log file tells me
>>
>> "ConTeXt ver: 2007.08.08 14:35 MKII fmt: 2008.5.6 int:
>> english/english"
>>
>> This is on a Gentoo Linux system.
>
> Update the file database with 'mktexlsr' or 'texhash'.
>
texhash: Updating /usr/local/context_minimal/tex/texmf/ls-R...
texhash: Updating /usr/local/context_minimal/tex/texmf-extra/ls-R...
texhash: Updating /usr/local/context_minimal/tex/texmf-fonts/ls-R...
texhash: Updating /usr/local/context_minimal/tex/texmf-linux/ls-R...
texhash: Updating /usr/local/context_minimal/tex/texmf-local/ls-R...
texhash: Done.
Unfortunately that did not fix it. I get the exact same error.
Thanks for your help.
Roger
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: letter module
2008-08-14 10:02 ` Roger Mason
@ 2008-08-14 13:32 ` Wolfgang Schuster
2008-08-14 20:02 ` Roger Mason
0 siblings, 1 reply; 9+ messages in thread
From: Wolfgang Schuster @ 2008-08-14 13:32 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Thu, Aug 14, 2008 at 12:02 PM, Roger Mason <rmason@esd.mun.ca> wrote:
> Hi Wolfgang,
>
> "Wolfgang Schuster" <schuster.wolfgang@googlemail.com> writes:
>
>> On Wed, Aug 13, 2008 at 3:34 PM, Roger Mason <rmason@esd.mun.ca> wrote:
>>> Hello,
>>>
>>> I just downloaded the letter module and installed it by unzipping the
>>> t-letter.zip file into /usr/local/context_minimal/.
>>>
>>> When I try a test letter:
>>>
>>> \usemodule[letter]
>>>
>>> \starttext
>>> \startletter
>>> It is raining again.
>>> \stopletter
>>> \stoptext
>>>
>>> context fails with:
>>>
>>> systems : system commands are enabled
>>> system : module letter not found
>>> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/sort-lan.tex
>>> loading : Context Sorting Macros (languages)
>>> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/sort-lan.mkii))
>>> (/usr/local/context_minimal/tex/texmf-local/tex/context/base/pdfr-def.tex)
>>> systems : begin file ltrtest at line 3
>>> ! Undefined control sequence.
>>> l.4 \startletter
>>>
>>> ?
>>>
>>> The log file tells me
>>>
>>> "ConTeXt ver: 2007.08.08 14:35 MKII fmt: 2008.5.6 int:
>>> english/english"
>>>
>>> This is on a Gentoo Linux system.
>>
>> Update the file database with 'mktexlsr' or 'texhash'.
>>
>
> texhash: Updating /usr/local/context_minimal/tex/texmf/ls-R...
> texhash: Updating /usr/local/context_minimal/tex/texmf-extra/ls-R...
> texhash: Updating /usr/local/context_minimal/tex/texmf-fonts/ls-R...
> texhash: Updating /usr/local/context_minimal/tex/texmf-linux/ls-R...
> texhash: Updating /usr/local/context_minimal/tex/texmf-local/ls-R...
> texhash: Done.
>
> Unfortunately that did not fix it. I get the exact same error.
Unzip the archive either in '/usr/local/context_minimal/tex/texmf-local/'
or in in the local TeX tree in your home folder.
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* letter module
@ 2009-09-21 19:00 Wolfgang Schuster
0 siblings, 0 replies; 9+ messages in thread
From: Wolfgang Schuster @ 2009-09-21 19:00 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi all,
I uploaded a new version of the letter module that deals with the recent
changes in the MkIV spacing model, as a result of this you need todays
beta (2009.09.21) or later.
For MkII users this message is unimportant because the changes don't
affect
them and older installations can be used without problems, if there are
problems report them and I will fix it.
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Letter module
@ 2014-06-25 15:30 Mo Abrahams
2014-06-26 13:55 ` Mo Abrahams
0 siblings, 1 reply; 9+ messages in thread
From: Mo Abrahams @ 2014-06-25 15:30 UTC (permalink / raw)
To: ntg-context
Hello,
Is there any updated documentation for the letter/correspondence module? All I can find
is version 2010.08.27 and I can see from this list that things have
changed, I just don't know where to find out what.
Also, can anyone tell me how to remove the label above the date, how to
add a pdf containing my letterheading as the page background, and how to
add a horizontal line between the backaddress and the toaddress?
For the page background I currently have:
\setupletter[
backgroundimage={letterhead}
]
but it doesn't seem to do anything. I've tried adding the file
extension.
Thanks,
Mo.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Letter module
2014-06-25 15:30 Letter module Mo Abrahams
@ 2014-06-26 13:55 ` Mo Abrahams
2014-06-29 8:00 ` Wolfgang Schuster
0 siblings, 1 reply; 9+ messages in thread
From: Mo Abrahams @ 2014-06-26 13:55 UTC (permalink / raw)
To: ntg-context
Hello again,
I managed to get the backaddress looking how I wanted by reading again
through the main ConTeXt manual. I've also got my letterhead loading as
the page background to some degree like so:
\defineletterelement[layer][lettermain][Stationery]{\externalfigure[letterhead][width=210mm,height=297mm]}
\setupletterlayer
[lettermain]
[x=0mm,
y=0mm,
alternative=Stationery]
but there seems to be a tiny border around it rather than being flush to
the edges of the page. I've tried other methods using layers and
\setupbackgrounds but they seem to have no effect at all.
Can someone help with that?
I still haven't worked out how to remove the lavel above the date, and
to make matters worse it doesn't seem to be affected by changing the
document language either!
Mo.
On Wed, Jun 25, 2014 at 05:30:56PM +0200, Mo Abrahams wrote:
> Hello,
>
> Is there any updated documentation for the letter/correspondence module? All I can find
> is version 2010.08.27 and I can see from this list that things have
> changed, I just don't know where to find out what.
>
> Also, can anyone tell me how to remove the label above the date, how to
> add a pdf containing my letterheading as the page background, and how to
> add a horizontal line between the backaddress and the toaddress?
>
> For the page background I currently have:
>
> \setupletter[
> backgroundimage={letterhead}
> ]
>
> but it doesn't seem to do anything. I've tried adding the file
> extension.
>
> Thanks,
>
> Mo.
>
--
Mo
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Letter module
2014-06-26 13:55 ` Mo Abrahams
@ 2014-06-29 8:00 ` Wolfgang Schuster
0 siblings, 0 replies; 9+ messages in thread
From: Wolfgang Schuster @ 2014-06-29 8:00 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 26.06.2014 um 15:55 schrieb Mo Abrahams <moabrahams+context@dashavoo.com>:
> Hello again,
>
> I managed to get the backaddress looking how I wanted by reading again
> through the main ConTeXt manual. I've also got my letterhead loading as
> the page background to some degree like so:
>
> \defineletterelement[layer][lettermain][Stationery]{\externalfigure[letterhead][width=210mm,height=297mm]}
>
> \setupletterlayer
> [lettermain]
> [x=0mm,
> y=0mm,
> alternative=Stationery]
>
> but there seems to be a tiny border around it rather than being flush to
> the edges of the page. I've tried other methods using layers and
> \setupbackgrounds but they seem to have no effect at all.
>
> Can someone help with that?
>
> I still haven't worked out how to remove the lavel above the date, and
> to make matters worse it doesn't seem to be affected by changing the
> document language either!
To put a image in the background you can use the “backgroundimage” key for the \setupletteroptions
command, the image will then be placed in the back of each page.
\usemodule[letter]
\setupexternalfigures[location=default]
\setupletteroptions[backgroundimage=mill]
\startletter
\dorecurse{6}{\input knuth\par}
\stopletter
You can also use the “lettermain” and “letternext” layers when you want more control about the placement
of the backgrounds. What’s missing in your setup above is to remove the offset for background which can
be done with \setupletterframe[…][offset=overlay], to control on which page the image is shown you can
use the “state” key for \setupletterlayer.
\usemodule[letter]
\setupexternalfigures[location=default]
\startsetups[letter:layer:lettermain]
\externalfigure[mill][width=210mm,height=297mm]
\stopsetups
\setupletterlayer
[lettermain]
[x=0mm,
y=0mm,
%state=repeat,
alternative=setups]
\setupletterframe
[lettermain]
[offset=overlay]
\startletter
\dorecurse{6}{\input knuth\par}
\stopletter
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2014-06-29 8:00 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-08-13 13:34 letter module Roger Mason
2008-08-13 13:51 ` Wolfgang Schuster
2008-08-14 10:02 ` Roger Mason
2008-08-14 13:32 ` Wolfgang Schuster
2008-08-14 20:02 ` Roger Mason
2009-09-21 19:00 Wolfgang Schuster
2014-06-25 15:30 Letter module Mo Abrahams
2014-06-26 13:55 ` Mo Abrahams
2014-06-29 8:00 ` Wolfgang Schuster
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).