ntg-context - mailing list for ConTeXt users
 help / color / mirror / Atom feed
* Re: "Darwin x86_64" is not supported yet error.
       [not found] <mailman.1.1346666401.23286.ntg-context@ntg.nl>
@ 2012-09-03 10:47 ` dalyoung
  2012-09-04  1:24 ` dalyoung
  2012-09-04  4:13 ` dalyoung
  2 siblings, 0 replies; 6+ messages in thread
From: dalyoung @ 2012-09-03 10:47 UTC (permalink / raw)
  To: ntg-context

Dear Mojca and Sietse,

Thank for your concern.

I have tried to update ConTeXt installed in a MacBook which was upgraded to Mountain Lion a week ago too. 
First-setup.sh runs very well without any errors.

Tomorrow, I will run your first-setup.sh in a iMac which had a problem to update.
I'll report the result tomorrow.

There may be different setting in a terminal as Mojca said.

Best regards,

Dalyoung

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : http://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: "Darwin x86_64" is not supported yet error.
       [not found] <mailman.1.1346666401.23286.ntg-context@ntg.nl>
  2012-09-03 10:47 ` "Darwin x86_64" is not supported yet error dalyoung
@ 2012-09-04  1:24 ` dalyoung
  2012-09-04  4:13 ` dalyoung
  2 siblings, 0 replies; 6+ messages in thread
From: dalyoung @ 2012-09-04  1:24 UTC (permalink / raw)
  To: ntg-context

Dear  Sietse,

I run your code and got the following result:

=== system branch is Darwin: Darwin
=== cpu branch is x86_64: x86_64
=== system:   Darwin
=== cpu:      x86_64
=== platform: osx-64

It seems to me that the system is OK. But first-setup.sh issues the same error message.

After downloading "first-setup.sh" again and try to update again, I'll report the result.

Thank you. 

Best regards,

Dalyoung

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : http://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: "Darwin x86_64" is not supported yet error.
       [not found] <mailman.1.1346666401.23286.ntg-context@ntg.nl>
  2012-09-03 10:47 ` "Darwin x86_64" is not supported yet error dalyoung
  2012-09-04  1:24 ` dalyoung
@ 2012-09-04  4:13 ` dalyoung
  2 siblings, 0 replies; 6+ messages in thread
From: dalyoung @ 2012-09-04  4:13 UTC (permalink / raw)
  To: ntg-context

Dear  Sietse,

I download "first-setup.sh" and run it.
It runs well and updates everything.

the updated version is 
********
ConTeXt  ver: 2012.08.28 20:00 MKIV  fmt: 2012.9.4
********

Thank you for your help. 

Best regards,

Dalyoung

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : http://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: "Darwin x86_64" is not supported yet error.
  2012-09-03  8:15 ` Mojca Miklavec
@ 2012-09-03  8:32   ` Sietse Brouwer
  0 siblings, 0 replies; 6+ messages in thread
From: Sietse Brouwer @ 2012-09-03  8:32 UTC (permalink / raw)
  To: mailing list for ConTeXt users

[-- Attachment #1: Type: text/plain, Size: 1576 bytes --]

Hi Jeong,

Like Mojca says, this is very strange. I've attached a trimmed-down
version of first-setup.sh with some debug print statements sprinkled
in; could you run that and post its output here? The output should be
something like this, possibly without the two 'branch' lines.

=== system branch is Linux: Linux
=== cpu branch is i*86: i686
=== system:   Linux
=== cpu:      i686
=== platform: linux

Cheers,
Sietse


On Mon, Sep 3, 2012 at 10:15 AM, Mojca Miklavec
<mojca.miklavec.lists@gmail.com> wrote:
> On Mon, Sep 3, 2012 at 6:51 AM, Jeong Dalyoung wrote:
>> Dear all,
>>
>> Today I tried to update ConTeXt using first setup and got an error message:
>>
>> Error: your system "Darwin x86_64" is not supported yet.
>>
>>
>> "first setup" worked well before I upgrade Mac OS to Mountain Lion from snow leopard two weeks ago.
>
> I'm clueless. The system Darwin X86_64 is definitely supported and it
> should work without problems on Mountain Lion (apart from maybe
> complaining gatekeeper which is not the case here).
>
> Maybe it's a problem in the shell?
>
> Mojca
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive  : http://foundry.supelec.fr/projects/contextrev/
> wiki     : http://contextgarden.net
> ___________________________________________________________________________________

[-- Attachment #2: debug.sh --]
[-- Type: application/x-sh, Size: 2637 bytes --]

[-- Attachment #3: Type: text/plain, Size: 485 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : http://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: "Darwin x86_64" is not supported yet error.
  2012-09-03  4:51 Jeong Dalyoung
@ 2012-09-03  8:15 ` Mojca Miklavec
  2012-09-03  8:32   ` Sietse Brouwer
  0 siblings, 1 reply; 6+ messages in thread
From: Mojca Miklavec @ 2012-09-03  8:15 UTC (permalink / raw)
  To: mailing list for ConTeXt users

On Mon, Sep 3, 2012 at 6:51 AM, Jeong Dalyoung wrote:
> Dear all,
>
> Today I tried to update ConTeXt using first setup and got an error message:
>
> Error: your system "Darwin x86_64" is not supported yet.
>
>
> "first setup" worked well before I upgrade Mac OS to Mountain Lion from snow leopard two weeks ago.

I'm clueless. The system Darwin X86_64 is definitely supported and it
should work without problems on Mountain Lion (apart from maybe
complaining gatekeeper which is not the case here).

Maybe it's a problem in the shell?

Mojca
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : http://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________


^ permalink raw reply	[flat|nested] 6+ messages in thread

* "Darwin x86_64" is not supported yet error.
@ 2012-09-03  4:51 Jeong Dalyoung
  2012-09-03  8:15 ` Mojca Miklavec
  0 siblings, 1 reply; 6+ messages in thread
From: Jeong Dalyoung @ 2012-09-03  4:51 UTC (permalink / raw)
  To: ntg-context

Dear all,

Today I tried to update ConTeXt using first setup and got an error message:

Error: your system "Darwin x86_64" is not supported yet.


"first setup" worked well before I upgrade Mac OS to Mountain Lion from snow leopard two weeks ago.

 
The current ConTeXt version and Luatex version in my Mac are



ConTeXt ver: 2012.07.20 00:58 MKIV fmt: 2012.7.20 int: english/english

system > cont-new.mkiv loaded
…
mkiv lua stats > latex banner - this is latex, version beta-0.70.2-2012052309 (tex live 2012)


How to update the ConTeXt to latest beta?

Thank you.

Best regards,

Dalyoung


___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : http://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2012-09-04  4:13 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <mailman.1.1346666401.23286.ntg-context@ntg.nl>
2012-09-03 10:47 ` "Darwin x86_64" is not supported yet error dalyoung
2012-09-04  1:24 ` dalyoung
2012-09-04  4:13 ` dalyoung
2012-09-03  4:51 Jeong Dalyoung
2012-09-03  8:15 ` Mojca Miklavec
2012-09-03  8:32   ` Sietse Brouwer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).