* Re: Strange problem related to \usemodule
@ 2011-10-10 7:26 Hongwen Qiu
0 siblings, 0 replies; 8+ messages in thread
From: Hongwen Qiu @ 2011-10-10 7:26 UTC (permalink / raw)
To: Ntg-context
It seems that if I copied all of the module files under the current
directory, it works perfectly.
And of course mtxrun --locate t-vim.tex gives the correct location just
as indicated by my previously attached log file.
And there's only one environment variable corresponding to TeX settings:
$ env |grep -i TEX
PATH=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-linux-64/bin:.... (It's
very long)
Actually not only the modules under tex/texmf-modules not work on the
"Remote", but also modules under tex/texmf-local don't work either.
On Mon, 2011-10-10 at 12:57 +0800, Hongwen Qiu wrote:
> Hi,
>
> I have access to three machines both running GNU/Linux x86-64, I call
> them "Laptop", "Desktop" and "Remote" respectively here on.
>
> The "Laptop" has full access to the internet, so I always install and
> upgrade my ConTeXt Standalone on it when I'm home.
>
> At workplace, I can surfer the internet with the "Desktop" while the
> RSYNC port is blocked.
>
> I only can access the "Remote" through ssh from the "Desktop" without
> root privilege and can not access the internet.
>
> So, I always copied the ConTeXt standalone from my "Laptop" onto my
> "Desktop", and from my "Desktop" onto "Remote" if necessary. Then, I'll
> delete the cache before I set the PATH to the appropriate location and
> run context --make and mtxrun --generate.
>
> So the ConTeXt standalones are almost identical on both my "Desktop" and
> "Remote". And the following minimal example just works fine on my
> "Desktop" but failed on the "Remote",
> =========== Minimal Example ============================
> \usemodule[vim]
>
> \definevimtyping[RUBY][syntax=ruby]
>
> \starttext
>
> \startRUBY
> puts "Hello"
> \stopRUBY
>
> \stoptext
> =========================================================
> Actually, on "Remote", whatever module I use, it will prompt the
> Undefined Control Sequence error regarding the first command I used from
> that module with the module loaded correctly. Attached is the error log
> accompany the above minimal example.
>
> So, what can be the problem with my "Remote".
>
> TIA. for any help.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Strange problem related to \usemodule
2011-10-11 7:26 ` Hans Hagen
@ 2011-10-11 8:30 ` Hongwen Qiu
0 siblings, 0 replies; 8+ messages in thread
From: Hongwen Qiu @ 2011-10-11 8:30 UTC (permalink / raw)
To: Hans Hagen; +Cc: mailing list for ConTeXt users
On Tue, 2011-10-11 at 09:26 +0200, Hans Hagen wrote:
> can you try to load the file directly with
>
> \input{/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex}
>
> and see if the command is defined then?
This method works with other modules, e.g. t-ruby.tex, but not
t-vim.tex, I think that's because the vim module depends on other
modules that's still in texmf-modules.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Strange problem related to \usemodule
2011-10-11 1:39 ` Hongwen Qiu
2011-10-11 3:09 ` Aditya Mahajan
@ 2011-10-11 7:26 ` Hans Hagen
2011-10-11 8:30 ` Hongwen Qiu
1 sibling, 1 reply; 8+ messages in thread
From: Hans Hagen @ 2011-10-11 7:26 UTC (permalink / raw)
To: Hongwen Qiu; +Cc: mailing list for ConTeXt users
On 11-10-2011 03:39, Hongwen Qiu wrote:
> On Mon, 2011-10-10 at 14:09 +0200, Hans Hagen wrote:
>> can you run with \enabletrackers[modules.loading]
> Attached is the log with \enabletrackers[modules.loading].
can you try to load the file directly with
\input{/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex}
and see if the command is defined then?
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Strange problem related to \usemodule
2011-10-11 3:09 ` Aditya Mahajan
@ 2011-10-11 3:40 ` Hongwen Qiu
0 siblings, 0 replies; 8+ messages in thread
From: Hongwen Qiu @ 2011-10-11 3:40 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Mon, 2011-10-10 at 23:09 -0400, Aditya Mahajan wrote:
> What are the first 10-15 lines of
> /ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex?
$ head
-15 /ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex
%D \module
%D [ file=t-vim,
%D version=2011.09.03,
%D title=\CONTEXT\ User Module,
%D subtitle=Vim syntax highlighting,
%D author=Aditya Mahajan,
%D date=\currentdate,
%D copyright=Aditya Mahajan,
%D email=adityam <at> ieee <dot> org,
%D license=Simplified BSD License]
\writestatus{loading}{Vim syntax highlighting (ver: 2011.09.03)}
\startmodule [vim]
\usemodule [filter]
>
> The vim module usually gives a message
>
> loading > Vim syntax highlighting
>
> (or some variation of it...I have changed the default message
> recently),
> but that message is missing in your log.
>
> My guess is that the t-vim module that you have is somehow corrupted,
> and
> therefore, \definevimtyping command is undefined.
This couldn't be the problem (anyhow, I attached the 15 lines of
t-vim.tex above), since I have said in my previous messages that if I
copied the neccessary files from the tex/texmf-modules to the current
directory it works just fine, and the problem are not only relates to
t-vim module, all of the modules under tex/texmf-modules and
tex/texmf-local just does not work.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Strange problem related to \usemodule
2011-10-11 1:39 ` Hongwen Qiu
@ 2011-10-11 3:09 ` Aditya Mahajan
2011-10-11 3:40 ` Hongwen Qiu
2011-10-11 7:26 ` Hans Hagen
1 sibling, 1 reply; 8+ messages in thread
From: Aditya Mahajan @ 2011-10-11 3:09 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Tue, 11 Oct 2011, Hongwen Qiu wrote:
> On Mon, 2011-10-10 at 14:09 +0200, Hans Hagen wrote:
>> can you run with \enabletrackers[modules.loading]
> Attached is the log with \enabletrackers[modules.loading].
What are the first 10-15 lines of
/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex?
The vim module usually gives a message
loading > Vim syntax highlighting
(or some variation of it...I have changed the default message recently),
but that message is missing in your log.
My guess is that the t-vim module that you have is somehow corrupted, and
therefore, \definevimtyping command is undefined.
Aditya
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Strange problem related to \usemodule
2011-10-10 12:09 ` Hans Hagen
@ 2011-10-11 1:39 ` Hongwen Qiu
2011-10-11 3:09 ` Aditya Mahajan
2011-10-11 7:26 ` Hans Hagen
0 siblings, 2 replies; 8+ messages in thread
From: Hongwen Qiu @ 2011-10-11 1:39 UTC (permalink / raw)
To: Hans Hagen; +Cc: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 164 bytes --]
On Mon, 2011-10-10 at 14:09 +0200, Hans Hagen wrote:
> can you run with \enabletrackers[modules.loading]
Attached is the log with \enabletrackers[modules.loading].
[-- Attachment #2: b.log --]
[-- Type: text/x-log, Size: 6091 bytes --]
(b.tex
ConTeXt ver: 2011.10.08 11:42 MKIV fmt: 2011.10.10 int: english/english
system > cont-new.mkiv loaded
(/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/cont-new.mkiv
system > beware: some patches loaded from cont-new.mkiv
)
system > b.top loaded
system > options > start used options
used options > % runtime options files (command line driven)
used options > \unprotect
used options > % feedback and basic job control
used options > % handy for special styles
used options > \startluacode
used options > document = document or { }
used options > document.arguments={
used options > }
used options > document.files={
used options > "b.tex",
used options > }
used options > \stopluacode
used options > % process info
used options > \setupsystem[inputfile=b.tex]
used options > \setupsystem[\c!n=1,\c!m=1]
used options > % modes
used options > % options (not that important)
used options > \startsetups *runtime:options
used options > \stopsetups
used options > % styles and modules
used options > \startsetups *runtime:modules
used options > \stopsetups
used options > % done
used options > \protect \endinput
system > options > stop used options
(b.top)
fonts > latin modern fonts are not preloaded
languages > language en is active
resolvers > modules > locating: prefix: '', askedname: 'vim', truename: 'vim'
resolvers > modules > checking file: 'm-vim.mkvi'
resolvers > modules > checking file: 'm-vim.mkiv'
resolvers > modules > checking file: 'm-vim.tex'
resolvers > modules > checking file: 'm-vim.cld'
resolvers > modules > checking file: 'm-vim.lua'
resolvers > modules > checking file: 'p-vim.mkvi'
resolvers > modules > checking file: 'p-vim.mkiv'
resolvers > modules > checking file: 'p-vim.tex'
resolvers > modules > checking file: 'p-vim.cld'
resolvers > modules > checking file: 'p-vim.lua'
resolvers > modules > checking file: 's-vim.mkvi'
resolvers > modules > checking file: 's-vim.mkiv'
resolvers > modules > checking file: 's-vim.tex'
resolvers > modules > checking file: 's-vim.cld'
resolvers > modules > checking file: 's-vim.lua'
resolvers > modules > checking file: 'x-vim.mkvi'
resolvers > modules > checking file: 'x-vim.mkiv'
resolvers > modules > checking file: 'x-vim.tex'
resolvers > modules > checking file: 'x-vim.cld'
resolvers > modules > checking file: 'x-vim.lua'
resolvers > modules > checking file: 'v-vim.mkvi'
resolvers > modules > checking file: 'v-vim.mkiv'
resolvers > modules > checking file: 'v-vim.tex'
resolvers > modules > checking file: 'v-vim.cld'
resolvers > modules > checking file: 'v-vim.lua'
resolvers > modules > checking file: 't-vim.mkvi'
resolvers > modules > checking file: 't-vim.mkiv'
resolvers > modules > checking file: 't-vim.tex'
resolvers > modules > loading: '/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex'
resolvers > modules > loaded: 'vim'
! Undefined control sequence.
system > tex > error on line 4 in file b.tex: Undefined control sequence ...
1 \enabletrackers[modules.loading]
2 \usemodule[vim]
3
4 >> \definevimtyping[RUBY][syntax=ruby]
5
6 \starttext
7
8 \startRUBY
9 puts "Hello"
10 \stopRUBY
11
12 \stoptext
13
l.4 \definevimtyping
[RUBY][syntax=ruby]
? X
system > files > start used files
used files > 1: filename=mult-mps.lua | filetype=tex | format=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/mult-mps.lua | usedmethod=database
used files > 2: filename=b.tex | foundname=b.tex | usedmethod=direct
used files > 3: filename=cont-new.mkiv | filetype=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/cont-new.mkiv | usedmethod=database
used files > 4: filename=b.top | foundname=b.top | usedmethod=direct
used files > 5: filename=lang-us.lua | filetype=lua | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/patterns/lang-us.lua | usedmethod=database
used files > 6: filename=t-vim.tex | filetype=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex | usedmethod=database
system > files > stop used files
system > structure > start used structure
used structure > text: b
system > structure > stop used structure
mkiv lua stats > used config file - selfautoparent:texmf/web2c/texmfcnf.lua
mkiv lua stats > used cache path - /ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606
mkiv lua stats > resource resolver - loadtime 0.032 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 6 found files, scanned paths:
mkiv lua stats > stored bytecode data - 295 modules, 63 tables, 358 chunks
mkiv lua stats > cleaned up reserved nodes - 32 nodes, 9 lists of 424
mkiv lua stats > node memory usage - 18 glue_spec, 1 dir
mkiv lua stats > node list callback tasks - 6 unique task lists, 1 instances (re)created, 104 calls
mkiv lua stats > used backend - pdf (backend for directly generating pdf output)
mkiv lua stats > loaded tex modules - 1 requested, 1 found (*-vim), 0 missing
mkiv lua stats > loaded patterns - en::2
mkiv lua stats > callbacks - 114 direct, 619 indirect, 733 total
mkiv lua stats > result saved in file - b.pdf
mkiv lua stats > luatex banner - this is luatex, version beta-0.70.1-2011051918 (rev 4277)
mkiv lua stats > control sequences - 29441 of 165536
mkiv lua stats > current memory usage - 25 MB (ctx: 26 MB)
mkiv lua stats > runtime - 2.787 seconds
[-- Attachment #3: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Strange problem related to \usemodule
2011-10-10 4:57 Hongwen Qiu
@ 2011-10-10 12:09 ` Hans Hagen
2011-10-11 1:39 ` Hongwen Qiu
0 siblings, 1 reply; 8+ messages in thread
From: Hans Hagen @ 2011-10-10 12:09 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 10-10-2011 06:57, Hongwen Qiu wrote:
> Actually, on "Remote", whatever module I use, it will prompt the
> Undefined Control Sequence error regarding the first command I used from
> that module with the module loaded correctly. Attached is the error log
> accompany the above minimal example.
>
> So, what can be the problem with my "Remote".
weird, as the log mentions that the file is loaded
can you run with \enabletrackers[modules.loading]
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Strange problem related to \usemodule
@ 2011-10-10 4:57 Hongwen Qiu
2011-10-10 12:09 ` Hans Hagen
0 siblings, 1 reply; 8+ messages in thread
From: Hongwen Qiu @ 2011-10-10 4:57 UTC (permalink / raw)
To: Ntg-context
[-- Attachment #1: Type: text/plain, Size: 1442 bytes --]
Hi,
I have access to three machines both running GNU/Linux x86-64, I call
them "Laptop", "Desktop" and "Remote" respectively here on.
The "Laptop" has full access to the internet, so I always install and
upgrade my ConTeXt Standalone on it when I'm home.
At workplace, I can surfer the internet with the "Desktop" while the
RSYNC port is blocked.
I only can access the "Remote" through ssh from the "Desktop" without
root privilege and can not access the internet.
So, I always copied the ConTeXt standalone from my "Laptop" onto my
"Desktop", and from my "Desktop" onto "Remote" if necessary. Then, I'll
delete the cache before I set the PATH to the appropriate location and
run context --make and mtxrun --generate.
So the ConTeXt standalones are almost identical on both my "Desktop" and
"Remote". And the following minimal example just works fine on my
"Desktop" but failed on the "Remote",
=========== Minimal Example ============================
\usemodule[vim]
\definevimtyping[RUBY][syntax=ruby]
\starttext
\startRUBY
puts "Hello"
\stopRUBY
\stoptext
=========================================================
Actually, on "Remote", whatever module I use, it will prompt the
Undefined Control Sequence error regarding the first command I used from
that module with the module loaded correctly. Attached is the error log
accompany the above minimal example.
So, what can be the problem with my "Remote".
TIA. for any help.
[-- Attachment #2: b.log --]
[-- Type: text/x-log, Size: 4292 bytes --]
(b.tex
ConTeXt ver: 2011.10.08 11:42 MKIV fmt: 2011.10.10 int: english/english
system > cont-new.mkiv loaded
(/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/cont-new.mkiv
system > beware: some patches loaded from cont-new.mkiv
)
system > b.top loaded
system > options > start used options
used options > % runtime options files (command line driven)
used options > \unprotect
used options > % feedback and basic job control
used options > % handy for special styles
used options > \startluacode
used options > document = document or { }
used options > document.arguments={
used options > }
used options > document.files={
used options > "b.tex",
used options > }
used options > \stopluacode
used options > % process info
used options > \setupsystem[inputfile=b.tex]
used options > \setupsystem[\c!n=1,\c!m=1]
used options > % modes
used options > % options (not that important)
used options > \startsetups *runtime:options
used options > \stopsetups
used options > % styles and modules
used options > \startsetups *runtime:modules
used options > \stopsetups
used options > % done
used options > \protect \endinput
system > options > stop used options
(b.top)
fonts > latin modern fonts are not preloaded
languages > language en is active
resolvers > modules > loaded: 'vim'
! Undefined control sequence.
system > tex > error on line 3 in file b.tex: Undefined control sequence ...
1 \usemodule[vim]
2
3 >> \definevimtyping[RUBY][syntax=ruby]
4
5 \starttext
6
7 \startRUBY
8 puts "Hello"
9 \stopRUBY
10
11 \stoptext
12
l.3 \definevimtyping
[RUBY][syntax=ruby]
? X
system > files > start used files
used files > 1: filename=mult-mps.lua | filetype=tex | format=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/mult-mps.lua | usedmethod=database
used files > 2: filename=b.tex | foundname=b.tex | usedmethod=direct
used files > 3: filename=cont-new.mkiv | filetype=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/cont-new.mkiv | usedmethod=database
used files > 4: filename=b.top | foundname=b.top | usedmethod=direct
used files > 5: filename=lang-us.lua | filetype=lua | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/patterns/lang-us.lua | usedmethod=database
used files > 6: filename=t-vim.tex | filetype=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex | usedmethod=database
system > files > stop used files
system > structure > start used structure
used structure > text: b
system > structure > stop used structure
mkiv lua stats > used config file - selfautoparent:texmf/web2c/texmfcnf.lua
mkiv lua stats > used cache path - /ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606
mkiv lua stats > resource resolver - loadtime 0.016 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 6 found files, scanned paths:
mkiv lua stats > stored bytecode data - 295 modules, 63 tables, 358 chunks
mkiv lua stats > cleaned up reserved nodes - 32 nodes, 9 lists of 424
mkiv lua stats > node memory usage - 18 glue_spec, 1 dir
mkiv lua stats > node list callback tasks - 6 unique task lists, 1 instances (re)created, 104 calls
mkiv lua stats > used backend - pdf (backend for directly generating pdf output)
mkiv lua stats > loaded tex modules - 1 requested, 1 found (*-vim), 0 missing
mkiv lua stats > loaded patterns - en::2
mkiv lua stats > callbacks - 114 direct, 618 indirect, 732 total
mkiv lua stats > result saved in file - b.pdf
mkiv lua stats > luatex banner - this is luatex, version beta-0.70.1-2011051918 (rev 4277)
mkiv lua stats > control sequences - 29441 of 165536
mkiv lua stats > current memory usage - 25 MB (ctx: 26 MB)
mkiv lua stats > runtime - 3.384 seconds
[-- Attachment #3: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2011-10-11 8:30 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-10-10 7:26 Strange problem related to \usemodule Hongwen Qiu
-- strict thread matches above, loose matches on Subject: below --
2011-10-10 4:57 Hongwen Qiu
2011-10-10 12:09 ` Hans Hagen
2011-10-11 1:39 ` Hongwen Qiu
2011-10-11 3:09 ` Aditya Mahajan
2011-10-11 3:40 ` Hongwen Qiu
2011-10-11 7:26 ` Hans Hagen
2011-10-11 8:30 ` Hongwen Qiu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).