* Re: First page of chapter
@ 2010-02-02 22:03 Andreas Harder
2010-02-03 2:51 ` Tom
0 siblings, 1 reply; 3+ messages in thread
From: Andreas Harder @ 2010-02-02 22:03 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1566 bytes --]
> I am struggling with getting the first pages of my chapters laid out as
> desired. What I want on the top third of the page is a roughly 2 inch square
> graphic on the left with the chapter number and chapter title on the right
> in large print. The following chunk errors out as shown but works when
> hard-coded. Am I headed off in the wrong direction by trying to use columns
> in this way? Previously, I tried treating the chapter number and title as
> text with startfiguretext. It works but I can't format the chapter titles to
> fit properly. Any suggestions for a ConTeXt beginner?
>
>
> \def\ChapterTop#1#2{
> \startcolumns[n=2]
> \placefigure[left]{none}{\externalfigure[chief]}
> \column
> \switchtobodyfont[26pt] {\ss\bf\sl #1}
> \blank[large]\blank[large]
> {\ss\bf #2}
> \stopcolumns}
>
> \setuphead[chapter]
> [command=\ChapterTop, header=high,footer=pagenumber,page=center]
>
> \input c:. %chapter used to test the code
Hi!
I think you search for something like this:
\def\ChapterTop#1#2% bottom-aligned
{\framed[width=broad,offset=overlay]
{\framed[width=2in,height=2in]{GRAPHIC}\hfill
\framed[align=right]{#1\blank[2*big]#2}}}
\definetext[ChapterFoot][footer][pagenumber]
\setuphead
[chapter]
[command=\ChapterTop,
header=high,
footer=ChapterFoot,
numberstyle=\ssbid,
textstyle=\ssbfd]
\starttext \showframe
\dorecurse{3}{\chapter{First Chapter}\dorecurse{5}{\input tufte}}
\stoptext
Greetings
Andreas
[-- Attachment #1.2: Type: text/html, Size: 3761 bytes --]
[-- Attachment #2: Type: text/plain, Size: 486 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: First page of chapter
2010-02-02 22:03 First page of chapter Andreas Harder
@ 2010-02-03 2:51 ` Tom
0 siblings, 0 replies; 3+ messages in thread
From: Tom @ 2010-02-03 2:51 UTC (permalink / raw)
To: 'mailing list for ConTeXt users'
That works. Now I have to figure out how to insert the picture in the place
marked GRAPHIC, get rid of all the boxes and get the page number to print on
the bottom of the first page of the chapter.
Tom Benjey
717-258-9733 voice
717-243-0074 fax
Twitter: @TomBenjey
From: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] On
Behalf Of Andreas Harder
Sent: Tuesday, February 02, 2010 5:04 PM
To: mailing list for ConTeXt users
Subject: Re: [NTG-context] First page of chapter
I am struggling with getting the first pages of my chapters laid out as
desired. What I want on the top third of the page is a roughly 2 inch square
graphic on the left with the chapter number and chapter title on the right
in large print. The following chunk errors out as shown but works when
hard-coded. Am I headed off in the wrong direction by trying to use columns
in this way? Previously, I tried treating the chapter number and title as
text with startfiguretext. It works but I can't format the chapter titles to
fit properly. Any suggestions for a ConTeXt beginner?
\def\ChapterTop#1#2{
\startcolumns[n=2]
\placefigure[left]{none}{\externalfigure[chief]}
\column
\switchtobodyfont[26pt] {\ss\bf\sl #1}
\blank[large]\blank[large]
{\ss\bf #2}
\stopcolumns}
\setuphead[chapter]
[command=\ChapterTop, header=high,footer=pagenumber,page=center]
\input c:. %chapter used to test the code
Hi!
I think you search for something like this:
\def\ChapterTop#1#2% bottom-aligned
{\framed[width=broad,offset=overlay]
{\framed[width=2in,height=2in]{GRAPHIC}\hfill
\framed[align=right]{#1\blank[2*big]#2}}}
\definetext[ChapterFoot][footer][pagenumber]
\setuphead
[chapter]
[command=\ChapterTop,
header=high,
footer=ChapterFoot,
numberstyle=\ssbid,
textstyle=\ssbfd]
\starttext \showframe
\dorecurse{3}{\chapter{First Chapter}\dorecurse{5}{\input tufte}}
\stoptext
Greetings
Andreas
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
* First page of chapter
@ 2010-02-02 17:01 Tom
0 siblings, 0 replies; 3+ messages in thread
From: Tom @ 2010-02-02 17:01 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1.1.1: Type: text/plain, Size: 1052 bytes --]
I am struggling with getting the first pages of my chapters laid out as
desired. What I want on the top third of the page is a roughly 2 inch square
graphic on the left with the chapter number and chapter title on the right
in large print. The following chunk errors out as shown but works when
hard-coded. Am I headed off in the wrong direction by trying to use columns
in this way? Previously, I tried treating the chapter number and title as
text with startfiguretext. It works but I can't format the chapter titles to
fit properly. Any suggestions for a ConTeXt beginner?
\def\ChapterTop#1#2{
\startcolumns[n=2]
\placefigure[left]{none}{\externalfigure[chief]}
\column
\switchtobodyfont[26pt] {\ss\bf\sl #1}
\blank[large]\blank[large]
{\ss\bf #2}
\stopcolumns}
\setuphead[chapter]
[command=\ChapterTop, header=high,footer=pagenumber,page=center]
\input c:. %chapter used to test the code
Tom Benjey
717-258-9733 voice
717-243-0074 fax
Twitter: @TomBenjey
Football player w C small
[-- Attachment #1.1.2: Type: text/html, Size: 28088 bytes --]
[-- Attachment #1.2: image003.jpg --]
[-- Type: image/jpeg, Size: 2475 bytes --]
[-- Attachment #2: Type: text/plain, Size: 486 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-02-03 2:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-02-02 22:03 First page of chapter Andreas Harder
2010-02-03 2:51 ` Tom
-- strict thread matches above, loose matches on Subject: below --
2010-02-02 17:01 Tom
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).