* line correction @ 2017-09-28 14:21 MF 2017-09-28 19:48 ` Henri 0 siblings, 1 reply; 14+ messages in thread From: MF @ 2017-09-28 14:21 UTC (permalink / raw) To: mailing list for ConTeXt users Hello list, I would like ConTeXt to snap normal text to grid after a quotation. This example does not work: -------------- \setupquotation[before={\switchtobodyfont[9pt]}] \starttext \showgrid \input knuth \startlinecorrection[halfline] \startquotation \input sapolsky \stopquotation \stoplinecorrection \input knuth \stoptext -------------- If I prepend a \setuplayout[grid=yes], it works, but grid snapping introduces also other side effects I don't want (i.e. tall formulas inside text taking too much vertical space). I would like the halfline spaces before and after the quotation to shrink or stretch a bit to the nearest multiple of the main text line height. Is there an automatic way to get the normal text "return" on the grid after a quotation without turning on a global grid snapping? Thanks, Massi ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 14:21 line correction MF @ 2017-09-28 19:48 ` Henri 2017-09-28 21:30 ` mf 0 siblings, 1 reply; 14+ messages in thread From: Henri @ 2017-09-28 19:48 UTC (permalink / raw) To: ntg-context On Thu, 2017-09-28 at 16:21 +0200, MF wrote: > Hello list, > I would like ConTeXt to snap normal text to grid after a quotation. > This example does not work: > > -------------- > \setupquotation[before={\switchtobodyfont[9pt]}] > > \starttext > \showgrid > > \input knuth > > \startlinecorrection[halfline] > \startquotation > \input sapolsky > \stopquotation > \stoplinecorrection > > \input knuth > > \stoptext > -------------- > > If I prepend a \setuplayout[grid=yes], it works, but grid snapping > introduces also other side effects I don't want (i.e. tall formulas > inside text taking too much vertical space). > > I would like the halfline spaces before and after the quotation to > shrink or stretch a bit to the nearest multiple of the main text line > height. > > Is there an automatic way to get the normal text "return" on the grid > after a quotation without turning on a global grid snapping? \setuplayout[grid=both] to round down both height and width when snapping. > > Thanks, > Massi > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 19:48 ` Henri @ 2017-09-28 21:30 ` mf 2017-09-28 21:47 ` luigi scarso ` (2 more replies) 0 siblings, 3 replies; 14+ messages in thread From: mf @ 2017-09-28 21:30 UTC (permalink / raw) To: ntg-context Thank you Henri. Now consider this: ------------------------------- \setuplayout[grid=both] \setupquotation[before={\switchtobodyfont[9pt]}] \starttext \showgrid \input knuth \startlinecorrection[halfline] \startquotation \input sapolsky \stopquotation \stoplinecorrection \input knuth $\displaystyle{\frac{1}{a + b}}$ \input knuth \stoptext ------------------------------- Now the text snaps to the grid after the quotation, but the tall formula inside the text overlaps with the text lines. The solution would be a grid configuration that gives the line containing the formula two lines of height, putting that only line in the middle and then snapping the following lines again to the grid (still solving the alignment of quotations as in the grid=both case). Is it possible? Best regards, Massi Il giorno ven, 29/09/2017 alle 08.48 +1300, Henri ha scritto: > On Thu, 2017-09-28 at 16:21 +0200, MF wrote: > > Hello list, > > I would like ConTeXt to snap normal text to grid after a quotation. > > This example does not work: > > > > -------------- > > \setupquotation[before={\switchtobodyfont[9pt]}] > > > > \starttext > > \showgrid > > > > \input knuth > > > > \startlinecorrection[halfline] > > \startquotation > > \input sapolsky > > \stopquotation > > \stoplinecorrection > > > > \input knuth > > > > \stoptext > > -------------- > > > > If I prepend a \setuplayout[grid=yes], it works, but grid snapping > > introduces also other side effects I don't want (i.e. tall formulas > > inside text taking too much vertical space). > > > > I would like the halfline spaces before and after the quotation to > > shrink or stretch a bit to the nearest multiple of the main text > > line > > height. > > > > Is there an automatic way to get the normal text "return" on the > > grid > > after a quotation without turning on a global grid snapping? > > \setuplayout[grid=both] to round down both height and width when > snapping. > > > > > Thanks, > > Massi > > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 21:30 ` mf @ 2017-09-28 21:47 ` luigi scarso 2017-09-29 8:33 ` Hans Hagen 2017-09-28 21:51 ` Henri 2017-09-28 21:55 ` Henri 2 siblings, 1 reply; 14+ messages in thread From: luigi scarso @ 2017-09-28 21:47 UTC (permalink / raw) To: mailing list for ConTeXt users On Thu, Sep 28, 2017 at 11:30 PM, mf <massifr@fastwebnet.it> wrote: > Thank you Henri. > > Now consider this: > ------------------------------- > \setuplayout[grid=both] > \setupquotation[before={\switchtobodyfont[9pt]}] > > \starttext > \showgrid > > \input knuth > > \startlinecorrection[halfline] > \startquotation > \input sapolsky > \stopquotation > \stoplinecorrection > > \input knuth > $\displaystyle{\frac{1}{a + b}}$ > \input knuth > > \stoptext > ------------------------------- > > Now the text snaps to the grid after the quotation, but the tall > formula inside the text overlaps with the text lines. > > The solution would be a grid configuration that gives the line > containing the formula two lines of height, putting that only line in > the middle and then snapping the following lines again to the grid > (still solving the alignment of quotations as in the grid=both case). > Is it possible? I suppose that this is not what you want, but perhaps it can give you some some idea \setuplayout[grid=both] \setupquotation[before={\switchtobodyfont[9pt]}] \starttext \showgrid \input knuth \startlinecorrection[halfline] \startquotation \input sapolsky \stopquotation \stoplinecorrection \input knuth \setbox0=\hbox{$\displaystyle{\frac{1}{a + b}}$}% \ruledvbox to 1\lineheight{\hsize=\wd0\vrule width0pt height0pt depth1\lineheight \vss\box0\vss} \input knuth \stoptext -- luigi ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 21:47 ` luigi scarso @ 2017-09-29 8:33 ` Hans Hagen 0 siblings, 0 replies; 14+ messages in thread From: Hans Hagen @ 2017-09-29 8:33 UTC (permalink / raw) To: ntg-context On 9/28/2017 11:47 PM, luigi scarso wrote: > On Thu, Sep 28, 2017 at 11:30 PM, mf <massifr@fastwebnet.it> wrote: >> Thank you Henri. >> >> Now consider this: >> ------------------------------- >> \setuplayout[grid=both] >> \setupquotation[before={\switchtobodyfont[9pt]}] >> >> \starttext >> \showgrid >> >> \input knuth >> >> \startlinecorrection[halfline] >> \startquotation >> \input sapolsky >> \stopquotation >> \stoplinecorrection >> >> \input knuth >> $\displaystyle{\frac{1}{a + b}}$ >> \input knuth >> >> \stoptext >> ------------------------------- >> >> Now the text snaps to the grid after the quotation, but the tall >> formula inside the text overlaps with the text lines. >> >> The solution would be a grid configuration that gives the line >> containing the formula two lines of height, putting that only line in >> the middle and then snapping the following lines again to the grid >> (still solving the alignment of quotations as in the grid=both case). >> Is it possible? > > > I suppose that this is not what you want, > but perhaps it can give you some some idea > > > > \setuplayout[grid=both] > \setupquotation[before={\switchtobodyfont[9pt]}] > > \starttext > \showgrid > > \input knuth > > \startlinecorrection[halfline] > \startquotation > \input sapolsky > \stopquotation > \stoplinecorrection linecorrection is to be used only with boxed material (normally something framed) > \input knuth > \setbox0=\hbox{$\displaystyle{\frac{1}{a + b}}$}% > \ruledvbox to 1\lineheight{\hsize=\wd0\vrule width0pt height0pt > depth1\lineheight \vss\box0\vss} > \input knuth > > \stoptext > > -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 21:30 ` mf 2017-09-28 21:47 ` luigi scarso @ 2017-09-28 21:51 ` Henri 2017-09-28 21:55 ` Henri 2 siblings, 0 replies; 14+ messages in thread From: Henri @ 2017-09-28 21:51 UTC (permalink / raw) To: ntg-context On Thu, 2017-09-28 at 23:30 +0200, mf wrote: > Thank you Henri. > > Now consider this: > ------------------------------- > \setuplayout[grid=both] > \setupquotation[before={\switchtobodyfont[9pt]}] > > \starttext > \showgrid > > \input knuth > > \startlinecorrection[halfline] > \startquotation > \input sapolsky > \stopquotation > \stoplinecorrection > > \input knuth > $\displaystyle{\frac{1}{a + b}}$ \startformula \frac{1}{a + b} \stopformula Using \displaystyle in inline math will always produce rubbish. > \input knuth > > \stoptext > ------------------------------- > > Now the text snaps to the grid after the quotation, but the tall > formula inside the text overlaps with the text lines. > > The solution would be a grid configuration that gives the line > containing the formula two lines of height, putting that only line in > the middle and then snapping the following lines again to the grid > (still solving the alignment of quotations as in the grid=both case). > Is it possible? > > Best regards, > Massi > > Il giorno ven, 29/09/2017 alle 08.48 +1300, Henri ha scritto: > > > > On Thu, 2017-09-28 at 16:21 +0200, MF wrote: > > > > > > Hello list, > > > I would like ConTeXt to snap normal text to grid after a quotation. > > > This example does not work: > > > > > > -------------- > > > \setupquotation[before={\switchtobodyfont[9pt]}] > > > > > > \starttext > > > \showgrid > > > > > > \input knuth > > > > > > \startlinecorrection[halfline] > > > \startquotation > > > \input sapolsky > > > \stopquotation > > > \stoplinecorrection > > > > > > \input knuth > > > > > > \stoptext > > > -------------- > > > > > > If I prepend a \setuplayout[grid=yes], it works, but grid snapping > > > introduces also other side effects I don't want (i.e. tall formulas > > > inside text taking too much vertical space). > > > > > > I would like the halfline spaces before and after the quotation to > > > shrink or stretch a bit to the nearest multiple of the main text > > > line > > > height. > > > > > > Is there an automatic way to get the normal text "return" on the > > > grid > > > after a quotation without turning on a global grid snapping? > > \setuplayout[grid=both] to round down both height and width when > > snapping. > > > > > > > > > > > Thanks, > > > Massi > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 21:30 ` mf 2017-09-28 21:47 ` luigi scarso 2017-09-28 21:51 ` Henri @ 2017-09-28 21:55 ` Henri 2017-09-28 22:35 ` mf 2 siblings, 1 reply; 14+ messages in thread From: Henri @ 2017-09-28 21:55 UTC (permalink / raw) To: ntg-context On Thu, 2017-09-28 at 23:30 +0200, mf wrote: > Thank you Henri. > > Now consider this: > ------------------------------- > \setuplayout[grid=both] > \setupquotation[before={\switchtobodyfont[9pt]}] > > \starttext > \showgrid > > \input knuth > > \startlinecorrection[halfline] > \startquotation > \input sapolsky > \stopquotation > \stoplinecorrection > > \input knuth > $\displaystyle{\frac{1}{a + b}}$ If you are really keen on screwing up your linespacing you can use \vadjust pre{\blank[line]}% $\displaystyle{\frac{1}{a + b}}$ \vadjust{\blank[line]}% as a one-off solution. But better make it a displayed formula or tweak it such that it does not disrupt spacing and blends in with the text. In this example I'd change $\displaystyle\frac{1}{a + b}$ to $(a+b)^{-1}$. Trust someone who does math typesetting every day. > \input knuth > > \stoptext > ------------------------------- > > Now the text snaps to the grid after the quotation, but the tall > formula inside the text overlaps with the text lines. > > The solution would be a grid configuration that gives the line > containing the formula two lines of height, putting that only line in > the middle and then snapping the following lines again to the grid > (still solving the alignment of quotations as in the grid=both case). > Is it possible? > > Best regards, > Massi > > Il giorno ven, 29/09/2017 alle 08.48 +1300, Henri ha scritto: > > > > On Thu, 2017-09-28 at 16:21 +0200, MF wrote: > > > > > > Hello list, > > > I would like ConTeXt to snap normal text to grid after a quotation. > > > This example does not work: > > > > > > -------------- > > > \setupquotation[before={\switchtobodyfont[9pt]}] > > > > > > \starttext > > > \showgrid > > > > > > \input knuth > > > > > > \startlinecorrection[halfline] > > > \startquotation > > > \input sapolsky > > > \stopquotation > > > \stoplinecorrection > > > > > > \input knuth > > > > > > \stoptext > > > -------------- > > > > > > If I prepend a \setuplayout[grid=yes], it works, but grid snapping > > > introduces also other side effects I don't want (i.e. tall formulas > > > inside text taking too much vertical space). > > > > > > I would like the halfline spaces before and after the quotation to > > > shrink or stretch a bit to the nearest multiple of the main text > > > line > > > height. > > > > > > Is there an automatic way to get the normal text "return" on the > > > grid > > > after a quotation without turning on a global grid snapping? > > \setuplayout[grid=both] to round down both height and width when > > snapping. > > > > > > > > > > > Thanks, > > > Massi > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 21:55 ` Henri @ 2017-09-28 22:35 ` mf 2017-09-29 3:19 ` Rik Kabel 2017-09-29 8:37 ` Hans Hagen 0 siblings, 2 replies; 14+ messages in thread From: mf @ 2017-09-28 22:35 UTC (permalink / raw) To: ntg-context Thank you Henri, a slightly modified version of your solution works! This is what I wanted to achieve: \setuplayout[grid=both] \setupquotation[before={\switchtobodyfont[9pt]}] \starttext \showgrid \input knuth \startlinecorrection[halfline] \startquotation \input sapolsky \stopquotation \stoplinecorrection \input knuth %\vadjust pre{\blank[line]}% not line, but halfline! \vadjust pre{\blank[halfline]}% $\displaystyle{\frac{1}{a + b}}$ %\vadjust{\blank[line]}% not line, but halfline! \vadjust{\blank[halfline]}% \input knuth \stoptext In general, I'm ok without grid snapping, because the default typesetting of taller formulas inside text is good enough for my goals. But I have many quotations (and floats), whose spaces before and after should be manually tuned not to push the main text out of the grid. And here grid snapping does a very good (and automated) job. But sometimes grid snapping is too strict, as in the tall formula example. I'm still afraid it's too strict and it will hurt in other places of the text, but now I have a solution, at least for that problem. So thank you again, best regards, Massi Il giorno ven, 29/09/2017 alle 10.55 +1300, Henri ha scritto: > On Thu, 2017-09-28 at 23:30 +0200, mf wrote: > > Thank you Henri. > > > > Now consider this: > > ------------------------------- > > \setuplayout[grid=both] > > \setupquotation[before={\switchtobodyfont[9pt]}] > > > > \starttext > > \showgrid > > > > \input knuth > > > > \startlinecorrection[halfline] > > \startquotation > > \input sapolsky > > \stopquotation > > \stoplinecorrection > > > > \input knuth > > $\displaystyle{\frac{1}{a + b}}$ > > If you are really keen on screwing up your linespacing you can use > > \vadjust pre{\blank[line]}% > $\displaystyle{\frac{1}{a + b}}$ > \vadjust{\blank[line]}% > > as a one-off solution. But better make it a displayed formula or > tweak it such that it does not > disrupt spacing and blends in with the text. In this example I'd > change $\displaystyle\frac{1}{a + > b}$ to $(a+b)^{-1}$. Trust someone who does math typesetting every > day. > > > \input knuth > > > > \stoptext > > ------------------------------- > > > > Now the text snaps to the grid after the quotation, but the tall > > formula inside the text overlaps with the text lines. > > > > The solution would be a grid configuration that gives the line > > containing the formula two lines of height, putting that only line > > in > > the middle and then snapping the following lines again to the grid > > (still solving the alignment of quotations as in the grid=both > > case). > > Is it possible? > > > > Best regards, > > Massi > > > > Il giorno ven, 29/09/2017 alle 08.48 +1300, Henri ha scritto: > > > > > > On Thu, 2017-09-28 at 16:21 +0200, MF wrote: > > > > > > > > Hello list, > > > > I would like ConTeXt to snap normal text to grid after a > > > > quotation. > > > > This example does not work: > > > > > > > > -------------- > > > > \setupquotation[before={\switchtobodyfont[9pt]}] > > > > > > > > \starttext > > > > \showgrid > > > > > > > > \input knuth > > > > > > > > \startlinecorrection[halfline] > > > > \startquotation > > > > \input sapolsky > > > > \stopquotation > > > > \stoplinecorrection > > > > > > > > \input knuth > > > > > > > > \stoptext > > > > -------------- > > > > > > > > If I prepend a \setuplayout[grid=yes], it works, but grid > > > > snapping > > > > introduces also other side effects I don't want (i.e. tall > > > > formulas > > > > inside text taking too much vertical space). > > > > > > > > I would like the halfline spaces before and after the quotation > > > > to > > > > shrink or stretch a bit to the nearest multiple of the main > > > > text > > > > line > > > > height. > > > > > > > > Is there an automatic way to get the normal text "return" on > > > > the > > > > grid > > > > after a quotation without turning on a global grid snapping? > > > > > > \setuplayout[grid=both] to round down both height and width when > > > snapping. > > > > > > > > > > > > > > > Thanks, > > > > Massi > > > > > > > > ___________________________________________________________________ > > ________________ > > If your question is of interest to others as well, please add an > > entry to the Wiki! > > > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ > > ntg-context > > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > > archive : https://bitbucket.org/phg/context-mirror/commits/ > > wiki : http://contextgarden.net > > ___________________________________________________________________ > > ________________ > > _____________________________________________________________________ > ______________ > If your question is of interest to others as well, please add an > entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/nt > g-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > _____________________________________________________________________ > ______________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 22:35 ` mf @ 2017-09-29 3:19 ` Rik Kabel 2017-09-29 9:30 ` Risposta: " MF 2017-09-29 8:37 ` Hans Hagen 1 sibling, 1 reply; 14+ messages in thread From: Rik Kabel @ 2017-09-29 3:19 UTC (permalink / raw) To: ntg-context Massi and list, There is one issue with \startlinecorrection of which you should be aware. The text is set in a vbox. If the block quotation it encloses (or whatever text it encloses) does not fit on the current page, a page break will be generated. This makes it useless with quotes near the bottom of a page. Enclosed texts longer than a page run over the bottom margin of the new page. It would be nice to have an alternative that does not have that limitation. -- Rik On 2017-09-28 18:35, mf wrote: > Thank you Henri, > a slightly modified version of your solution works! > > This is what I wanted to achieve: > > \setuplayout[grid=both] > \setupquotation[before={\switchtobodyfont[9pt]}] > > \starttext > \showgrid > > \input knuth > > \startlinecorrection[halfline] > \startquotation > \input sapolsky > \stopquotation > \stoplinecorrection > > \input knuth > %\vadjust pre{\blank[line]}% not line, but halfline! > \vadjust pre{\blank[halfline]}% > $\displaystyle{\frac{1}{a + b}}$ > %\vadjust{\blank[line]}% not line, but halfline! > \vadjust{\blank[halfline]}% > \input knuth > > \stoptext > > In general, I'm ok without grid snapping, because the default > typesetting of taller formulas inside text is good enough for my goals. > > But I have many quotations (and floats), whose spaces before and after > should be manually tuned not to push the main text out of the grid. > And here grid snapping does a very good (and automated) job. > > But sometimes grid snapping is too strict, as in the tall formula > example. I'm still afraid it's too strict and it will hurt in other > places of the text, but now I have a solution, at least for that > problem. > So thank you again, > best regards, > Massi > > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Risposta: line correction 2017-09-29 3:19 ` Rik Kabel @ 2017-09-29 9:30 ` MF 2017-09-29 12:08 ` Hans Hagen 0 siblings, 1 reply; 14+ messages in thread From: MF @ 2017-09-29 9:30 UTC (permalink / raw) To: ntg-context Il giorno gio, 28/09/2017 alle 23.19 -0400, Rik Kabel ha scritto: > Massi and list, > > There is one issue with \startlinecorrection of which you should be > aware. The text is set in a vbox. If the block quotation it encloses > (or > whatever text it encloses) does not fit on the current page, a page > break will be generated. This makes it useless with quotes near the > bottom of a page. Enclosed texts longer than a page run over the > bottom > margin of the new page. > Thank you Rik, I overlooked that (and now I'm reading Hans' reply about line correction being for framed material and not for quotations). I need to decide whether to - turn off grid snapping and adjust every single quotation or - turn grid snapping on, benefit from line correction most of the time and manually adjust the cases where a quotation is across a page boundary It depends on the texts I'm working on. This question reminds me the chapter about line profiling in the "Still" manual. There's no general, fully automated solution. > It would be nice to have an alternative that does not have that > limitation. > Hans talked about that at the last ConTeXt Meeting. If I understand well, it's very hard to calculate how much of the vertical space of the page TeX has used. And once it flushes the page, it frees the memory and forgets about it. Add inserts like footnotes to the problem and it gets really hard. Best regards, Massi ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Risposta: line correction 2017-09-29 9:30 ` Risposta: " MF @ 2017-09-29 12:08 ` Hans Hagen 0 siblings, 0 replies; 14+ messages in thread From: Hans Hagen @ 2017-09-29 12:08 UTC (permalink / raw) To: ntg-context On 9/29/2017 11:30 AM, MF wrote: > Il giorno gio, 28/09/2017 alle 23.19 -0400, Rik Kabel ha scritto: >> Massi and list, >> >> There is one issue with \startlinecorrection of which you should be >> aware. The text is set in a vbox. If the block quotation it encloses >> (or >> whatever text it encloses) does not fit on the current page, a page >> break will be generated. This makes it useless with quotes near the >> bottom of a page. Enclosed texts longer than a page run over the >> bottom >> margin of the new page. you can play with widow penalties \keeplinestogether{10} ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: line correction 2017-09-28 22:35 ` mf 2017-09-29 3:19 ` Rik Kabel @ 2017-09-29 8:37 ` Hans Hagen 2017-09-29 9:53 ` Risposta: " MF 1 sibling, 1 reply; 14+ messages in thread From: Hans Hagen @ 2017-09-29 8:37 UTC (permalink / raw) To: ntg-context On 9/29/2017 12:35 AM, mf wrote: > Thank you Henri, > a slightly modified version of your solution works! > > This is what I wanted to achieve: > > \setuplayout[grid=both] > \setupquotation[before={\switchtobodyfont[9pt]}] > > \starttext > \showgrid > > \input knuth > > \startlinecorrection[halfline] > \startquotation > \input sapolsky > \stopquotation > \stoplinecorrection > > \input knuth > %\vadjust pre{\blank[line]}% not line, but halfline! > \vadjust pre{\blank[halfline]}% > $\displaystyle{\frac{1}{a + b}}$ > %\vadjust{\blank[line]}% not line, but halfline! > \vadjust{\blank[halfline]}% > \input knuth > > \stoptext > > In general, I'm ok without grid snapping, because the default > typesetting of taller formulas inside text is good enough for my goals. for a bit more complex doc with many different unpredictable elements snapping seldom works ... we never use it (in production it often leads to more whitespace than one wants) ... the tex glue model is good enough (the requirement often comes from cases where snapping is the only way to get spacing right ... similar to the use of ragged right and no hyphenation because the used system can't handle it well ... in the worst case the limitations of a system then become undisputable 'good practice' and 'it's the default' and 'it's better for reader' etc) > But I have many quotations (and floats), whose spaces before and after > should be manually tuned not to push the main text out of the grid. > And here grid snapping does a very good (and automated) job. > > But sometimes grid snapping is too strict, as in the tall formula > example. I'm still afraid it's too strict and it will hurt in other > places of the text, but now I have a solution, at least for that > problem. > So thank you again, > best regards, > Massi > > Il giorno ven, 29/09/2017 alle 10.55 +1300, Henri ha scritto: >> On Thu, 2017-09-28 at 23:30 +0200, mf wrote: >>> Thank you Henri. >>> >>> Now consider this: >>> ------------------------------- >>> \setuplayout[grid=both] >>> \setupquotation[before={\switchtobodyfont[9pt]}] >>> >>> \starttext >>> \showgrid >>> >>> \input knuth >>> >>> \startlinecorrection[halfline] >>> \startquotation >>> \input sapolsky >>> \stopquotation >>> \stoplinecorrection >>> >>> \input knuth >>> $\displaystyle{\frac{1}{a + b}}$ >> >> If you are really keen on screwing up your linespacing you can use >> >> \vadjust pre{\blank[line]}% >> $\displaystyle{\frac{1}{a + b}}$ >> \vadjust{\blank[line]}% >> >> as a one-off solution. But better make it a displayed formula or >> tweak it such that it does not >> disrupt spacing and blends in with the text. In this example I'd >> change $\displaystyle\frac{1}{a + >> b}$ to $(a+b)^{-1}$. Trust someone who does math typesetting every >> day. >> >>> \input knuth >>> >>> \stoptext >>> ------------------------------- >>> >>> Now the text snaps to the grid after the quotation, but the tall >>> formula inside the text overlaps with the text lines. >>> >>> The solution would be a grid configuration that gives the line >>> containing the formula two lines of height, putting that only line >>> in >>> the middle and then snapping the following lines again to the grid >>> (still solving the alignment of quotations as in the grid=both >>> case). >>> Is it possible? >>> >>> Best regards, >>> Massi >>> >>> Il giorno ven, 29/09/2017 alle 08.48 +1300, Henri ha scritto: >>>> >>>> On Thu, 2017-09-28 at 16:21 +0200, MF wrote: >>>>> >>>>> Hello list, >>>>> I would like ConTeXt to snap normal text to grid after a >>>>> quotation. >>>>> This example does not work: >>>>> >>>>> -------------- >>>>> \setupquotation[before={\switchtobodyfont[9pt]}] >>>>> >>>>> \starttext >>>>> \showgrid >>>>> >>>>> \input knuth >>>>> >>>>> \startlinecorrection[halfline] >>>>> \startquotation >>>>> \input sapolsky >>>>> \stopquotation >>>>> \stoplinecorrection >>>>> >>>>> \input knuth >>>>> >>>>> \stoptext >>>>> -------------- >>>>> >>>>> If I prepend a \setuplayout[grid=yes], it works, but grid >>>>> snapping >>>>> introduces also other side effects I don't want (i.e. tall >>>>> formulas >>>>> inside text taking too much vertical space). >>>>> >>>>> I would like the halfline spaces before and after the quotation >>>>> to >>>>> shrink or stretch a bit to the nearest multiple of the main >>>>> text >>>>> line >>>>> height. >>>>> >>>>> Is there an automatic way to get the normal text "return" on >>>>> the >>>>> grid >>>>> after a quotation without turning on a global grid snapping? >>>> >>>> \setuplayout[grid=both] to round down both height and width when >>>> snapping. >>>> >>>>> >>>>> >>>>> Thanks, >>>>> Massi >>>>> >>> >>> ___________________________________________________________________ >>> ________________ >>> If your question is of interest to others as well, please add an >>> entry to the Wiki! >>> >>> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ >>> ntg-context >>> webpage : http://www.pragma-ade.nl / http://context.aanhet.net >>> archive : https://bitbucket.org/phg/context-mirror/commits/ >>> wiki : http://contextgarden.net >>> ___________________________________________________________________ >>> ________________ >> >> _____________________________________________________________________ >> ______________ >> If your question is of interest to others as well, please add an >> entry to the Wiki! >> >> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/nt >> g-context >> webpage : http://www.pragma-ade.nl / http://context.aanhet.net >> archive : https://bitbucket.org/phg/context-mirror/commits/ >> wiki : http://contextgarden.net >> _____________________________________________________________________ >> ______________ > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Risposta: line correction 2017-09-29 8:37 ` Hans Hagen @ 2017-09-29 9:53 ` MF 2017-09-29 21:38 ` Rik Kabel 0 siblings, 1 reply; 14+ messages in thread From: MF @ 2017-09-29 9:53 UTC (permalink / raw) To: ntg-context > > In general, I'm ok without grid snapping, because the default > > typesetting of taller formulas inside text is good enough for my > > goals. > > for a bit more complex doc with many different unpredictable > elements > snapping seldom works ... we never use it (in production it often > leads > to more whitespace than one wants) ... the tex glue model is good > enough > > (the requirement often comes from cases where snapping is the only > way > to get spacing right ... similar to the use of ragged right and no > hyphenation because the used system can't handle it well ... in the > worst case the limitations of a system then become undisputable > 'good > practice' and 'it's the default' and 'it's better for reader' etc) > So for quotations and adjust the space around them are you suggesting manual adjustment? I was already more convinced of keeping snap-to-grid turned off. Now the problem is how to adjust the spaces around quotations (and floats) at the minimum cost. Since the line heights of the main text and the ones of quotations do not change, the adjustment depends only on the number of lines of quotations. I could compile a table for more common cases: # of lines | adjustment 1 line | ... pt 2 lines | ... pt 3 lines | ... pt ... 20 lines | ... pt I should teach users how to insert adjustments, but the task would be eased because they should only copy a value from a table or insert a name that corresponds the the number of lines (i.e. "adjust-3-lines", "adjust-4-lines", etc.) Greetings, Massi ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Risposta: line correction 2017-09-29 9:53 ` Risposta: " MF @ 2017-09-29 21:38 ` Rik Kabel 0 siblings, 0 replies; 14+ messages in thread From: Rik Kabel @ 2017-09-29 21:38 UTC (permalink / raw) To: ntg-context On 2017-09-29 05:53, MF wrote: > So for quotations and adjust the space around them are you suggesting > manual adjustment? > > I was already more convinced of keeping snap-to-grid turned off. Now > the problem is how to adjust the spaces around quotations (and floats) > at the minimum cost. > > Since the line heights of the main text and the ones of quotations do > not change, the adjustment depends only on the number of lines of > quotations. I could compile a table for more common cases: > > # of lines | adjustment > 1 line | ... pt > 2 lines | ... pt > 3 lines | ... pt > ... > 20 lines | ... pt > > I should teach users how to insert adjustments, but the task would be > eased because they should only copy a value from a table or insert a > name that corresponds the the number of lines (i.e. "adjust-3-lines", > "adjust-4-lines", etc.) > > Greetings, > Massi > ___________________________________________________________________________________ Be careful not to insert an adjustment after a block that is split over two pages. A more useful (from a user perspective, I do not know about the coding) solution would be a command to snap to the nearest grid line (up or down, half or whole step). But both your count and my \snapto suffer from a common problem. Both are likely to leave different amounts of space before and after the block. A more evenly balanced approach is to compute the height of the block plus the vertical space by which it should be set off plus the vertical space needed to reach a grid-line or half-grid and, if the block stays on the page, split the difference top and bottom. If the block does not stay on the page, some portion with the top offset must be calculated and placed on the page if it otherwise meets widow/orphan tests. -- Rik ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2017-09-29 21:38 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-09-28 14:21 line correction MF 2017-09-28 19:48 ` Henri 2017-09-28 21:30 ` mf 2017-09-28 21:47 ` luigi scarso 2017-09-29 8:33 ` Hans Hagen 2017-09-28 21:51 ` Henri 2017-09-28 21:55 ` Henri 2017-09-28 22:35 ` mf 2017-09-29 3:19 ` Rik Kabel 2017-09-29 9:30 ` Risposta: " MF 2017-09-29 12:08 ` Hans Hagen 2017-09-29 8:37 ` Hans Hagen 2017-09-29 9:53 ` Risposta: " MF 2017-09-29 21:38 ` Rik Kabel
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).