* No partial contents for parts after the first
@ 2005-11-24 19:26 Giuseppe Bilotta
2005-11-25 17:37 ` Giuseppe Bilotta
2005-11-25 18:24 ` Giuseppe Bilotta
0 siblings, 2 replies; 7+ messages in thread
From: Giuseppe Bilotta @ 2005-11-24 19:26 UTC (permalink / raw)
I'm using the latest ConTeXt reported here, and I'm noticing
that partial contents for the second, third etc part are not
available. I have a bunch of files each of which goes like
\part{some part}
Some text (not always)
\placecontent
\chapter{some chapter}
Each of this file is \input from the master file. However,
only in the first part you actually see the (part-specific)
content: every other part reports
system : part,chapter,section,subsection not found/processed
The setup for the contents is as follows:
\setupcombinedlist[content]
[interaction=all,
partnumber=no,
alternative=c,
level=subsection]
\setuphead[part][alternative=middle,placehead=yes,resetnumber=no]
The problem is the 'resetnumber': if I take that off,
everything works perfectly.
--
Giuseppe "Oblomov" Bilotta
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: No partial contents for parts after the first
2005-11-24 19:26 No partial contents for parts after the first Giuseppe Bilotta
@ 2005-11-25 17:37 ` Giuseppe Bilotta
2005-11-25 18:24 ` Giuseppe Bilotta
1 sibling, 0 replies; 7+ messages in thread
From: Giuseppe Bilotta @ 2005-11-25 17:37 UTC (permalink / raw)
Thursday, November 24, 2005 Giuseppe Bilotta wrote:
> I'm using the latest ConTeXt reported here, and I'm noticing
> that partial contents for the second, third etc part are not
> available. I have a bunch of files each of which goes like
> \part{some part}
> Some text (not always)
> \placecontent
> \chapter{some chapter}
> Each of this file is \input from the master file. However,
> only in the first part you actually see the (part-specific)
> content: every other part reports
> system : part,chapter,section,subsection not found/processed
> The setup for the contents is as follows:
> \setupcombinedlist[content]
> [interaction=all,
> partnumber=no,
> alternative=c,
> level=subsection]
> \setuphead[part][alternative=middle,placehead=yes,resetnumber=no]
> The problem is the 'resetnumber': if I take that off,
> everything works perfectly.
Can somebody please look into this? It's the last thing I
need to print my thesis ...
--
Giuseppe "Oblomov" Bilotta
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: No partial contents for parts after the first
2005-11-24 19:26 No partial contents for parts after the first Giuseppe Bilotta
2005-11-25 17:37 ` Giuseppe Bilotta
@ 2005-11-25 18:24 ` Giuseppe Bilotta
2005-11-26 14:03 ` Re[2]: " Giuseppe Bilotta
2005-11-28 13:01 ` Hans Hagen
1 sibling, 2 replies; 7+ messages in thread
From: Giuseppe Bilotta @ 2005-11-25 18:24 UTC (permalink / raw)
Thursday, November 24, 2005 Giuseppe Bilotta wrote:
> I'm using the latest ConTeXt reported here, and I'm noticing
> that partial contents for the second, third etc part are not
> available. I have a bunch of files each of which goes like
> \part{some part}
> Some text (not always)
> \placecontent
> \chapter{some chapter}
> Each of this file is \input from the master file. However,
> only in the first part you actually see the (part-specific)
> content: every other part reports
> system : part,chapter,section,subsection not found/processed
> The setup for the contents is as follows:
> \setupcombinedlist[content]
> [interaction=all,
> partnumber=no,
> alternative=c,
> level=subsection]
> \setuphead[part][alternative=middle,placehead=yes,resetnumber=no]
> The problem is the 'resetnumber': if I take that off,
> everything works perfectly.
I've been debugging this, and the reason for the thing not
coming up for parts after the first is that when
resetnumber=no the current level is not properly detected:
in one case you get
\currentlevel ->:1
in the other
\currentlevel ->:2:2:4:2
Which is obviously wrong. Indeed, the problem is here:
\listentry{part}{1}{1}{Introduction}{2::1:0:0:0:0:0:0::7}{8}
\listentry{chapter}{2}{1}{Presentation}{2::1:1:0:0:0:0:0::8}{9}
\listentry{section}{3}{1.1}{History and motivation}{2::1:1:1:0:0:0:0::8}{9}
\listentry{chapter}{11}{2}{The basics}{2::1:2:0:0:0:0:0::12}{13}
\listentry{section}{12}{2.1}{Notation}{2::1:2:1:0:0:0:0::12}{13}
(more stuff)
\listentry{subsection}{78}{2.4.2}{Scaling the coordinate system}{2::1:2:4:2:0:0:0::31}{32}
\listentry{part}{79}{2}{Mathematical tools}{2::2:2:4:2:0:0:0::34}{35}
\listentry{chapter}{82}{3}{Bézier cubic analysis}{2::2:3:0:0:0:0:0::35}{36}
OOOPSIE! Since resetnumber=no, the listentry keeps the old
settings for chapter, section & the like. This is obviously
wrong. Even if the number is not reset, the sectionformat
*must* be reset, since at the beginning of the new
higher section(level) you are not in the previous one
anymore. So for example when starting a new part (with
resetnumber=no), and until
the first chapter of the new part is started we are in
chapter 0 for that part, not in chapter
'last-chapter-from-previous-part'.
Can this be fixed?
--
Giuseppe "Oblomov" Bilotta
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re[2]: No partial contents for parts after the first
2005-11-25 18:24 ` Giuseppe Bilotta
@ 2005-11-26 14:03 ` Giuseppe Bilotta
2005-11-28 13:03 ` Hans Hagen
2005-11-28 13:01 ` Hans Hagen
1 sibling, 1 reply; 7+ messages in thread
From: Giuseppe Bilotta @ 2005-11-26 14:03 UTC (permalink / raw)
Friday, November 25, 2005 Giuseppe Bilotta wrote:
> Thursday, November 24, 2005 Giuseppe Bilotta wrote:
>> I'm using the latest ConTeXt reported here, and I'm noticing
>> that partial contents for the second, third etc part are not
>> available. I have a bunch of files each of which goes like
>> \part{some part}
>> Some text (not always)
>> \placecontent
>> \chapter{some chapter}
>> Each of this file is \input from the master file. However,
>> only in the first part you actually see the (part-specific)
>> content: every other part reports
>> system : part,chapter,section,subsection not found/processed
>> The setup for the contents is as follows:
>> \setupcombinedlist[content]
>> [interaction=all,
>> partnumber=no,
>> alternative=c,
>> level=subsection]
>> \setuphead[part][alternative=middle,placehead=yes,resetnumber=no]
>> The problem is the 'resetnumber': if I take that off,
>> everything works perfectly.
> I've been debugging this, and the reason for the thing not
> coming up for parts after the first is that when
> resetnumber=no the current level is not properly detected:
> in one case you get
> \currentlevel ->:1
> in the other
> \currentlevel ->:2:2:4:2
> Which is obviously wrong. Indeed, the problem is here:
> \listentry{part}{1}{1}{Introduction}{2::1:0:0:0:0:0:0::7}{8}
> \listentry{chapter}{2}{1}{Presentation}{2::1:1:0:0:0:0:0::8}{9}
> \listentry{section}{3}{1.1}{History and
> motivation}{2::1:1:1:0:0:0:0::8}{9}
> \listentry{chapter}{11}{2}{The
> basics}{2::1:2:0:0:0:0:0::12}{13}
> \listentry{section}{12}{2.1}{Notation}{2::1:2:1:0:0:0:0::12}{13}
> (more stuff)
> \listentry{subsection}{78}{2.4.2}{Scaling the
> coordinate system}{2::1:2:4:2:0:0:0::31}{32}
> \listentry{part}{79}{2}{Mathematical
> tools}{2::2:2:4:2:0:0:0::34}{35}
> \listentry{chapter}{82}{3}{Bézier cubic
> analysis}{2::2:3:0:0:0:0:0::35}{36}
> OOOPSIE! Since resetnumber=no, the listentry keeps the old
> settings for chapter, section & the like. This is obviously
> wrong. Even if the number is not reset, the sectionformat
> *must* be reset, since at the beginning of the new
> higher section(level) you are not in the previous one
> anymore. So for example when starting a new part (with
> resetnumber=no), and until
> the first chapter of the new part is started we are in
> chapter 0 for that part, not in chapter
> 'last-chapter-from-previous-part'.
> Can this be fixed?
Ok, I came up with a solution that seems to work:
\def\definesection[#1]%
{\doifundefined{\??se#1}
{\doifelsenothing\firstsection
{\def\firstsection{#1}%
\setevalue{\??se#1\c!before}{\v!text}%
\setevalue{\??se\v!text\c!after}{#1}}
{\setevalue{\??se\commalistelement\c!after}{#1}%
\setevalue{\??se#1\c!before}{\lastsection}%
\setevalue{\??se\lastsection\c!after}{#1}}%
\advance\nofsections \plusone
\setevalue{\??se#1\c!level}{\the\nofsections}%
\letvalue{\??se#1\c!after}\empty
\setvalue{\e!next#1}{\@@nextsectionnumber{#1}}%
\setvalue{#1\c!number}{\@@longsectionnumber{#1}}%
\setvalue{#1\s!format}{\@@longformatnumber{#1}}%
\setevalue{\??by#1}{#1}%
\setevalue{\??by\v!by#1}{#1}%
\makecounter{\??se#1}%
\makecounter{\??se lastvalueof#1}% GB
\edef\lastsection{#1}%
\setvalue{\??sk#1}{#1}%
\letvalue{\??se#1\c!marking}\empty
\setupsection[#1][\c!previousnumber=\v!yes]}}%
% New command preserves the value of the next sectionlevel
% when resetnumber=no
\def\checkpreservevalueafter#1%
{\ifnum\getvalue{\??se#1\c!level}<\the\nofsections
\edef\preservedsection{\getvalue{\??se#1\c!after}}%
\ifconditional\@@resetsubheadnumbers
\setcounter{\??se lastvalueof\preservedsection}%
{0}%
\else
\setcounter{\??se lastvalueof\preservedsection}%
{\countervalue{\??se\preservedsection}}%
\fi
\fi}
\def\@@setsectionnumber#1#2%
{\letgvalueempty{\??se#1\s!start}% signal i.p.v. boolean
\setcounter{\??se#1}{#2}%
\checkpreservevalueafter{#1}
\resetsectioncounters{#1}
\checkpagecounter}
\def\@@nextsectionnumber#1%
{\letgvalueempty{\??se#1\s!start}% signal i.p.v. boolean
\ifnum\countervalue{\??se lastvalueof#1}>\zerocount
\setcounter{\??se#1}{\countervalue{\??se lastvalueof#1}}
\setcounter{\??se lastvalueof#1}{0}
\fi
\pluscounter{\??se#1}%
\checkpreservevalueafter{#1}
\resetsectioncounters{#1}
\checkpagecounter}
This has been tested in a fairly complex document (some
levels with resetnumber=no, some with the usual resetnumber;
sectionblocks etc). It works, and fixes the placecontent not
working. Will this go into mainline?
--
Giuseppe "Oblomov" Bilotta
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: No partial contents for parts after the first
2005-11-25 18:24 ` Giuseppe Bilotta
2005-11-26 14:03 ` Re[2]: " Giuseppe Bilotta
@ 2005-11-28 13:01 ` Hans Hagen
2005-11-28 15:49 ` Re[2]: " Giuseppe Bilotta
1 sibling, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2005-11-28 13:01 UTC (permalink / raw)
Giuseppe Bilotta wrote:
>
>I've been debugging this, and the reason for the thing not
>coming up for parts after the first is that when
>resetnumber=no the current level is not properly detected:
>in one case you get
>
>\currentlevel ->:1
>
>in the other
>
>\currentlevel ->:2:2:4:2
>
>Which is obviously wrong. Indeed, the problem is here:
>
>\listentry{part}{1}{1}{Introduction}{2::1:0:0:0:0:0:0::7}{8}
>\listentry{chapter}{2}{1}{Presentation}{2::1:1:0:0:0:0:0::8}{9}
>\listentry{section}{3}{1.1}{History and motivation}{2::1:1:1:0:0:0:0::8}{9}
>\listentry{chapter}{11}{2}{The basics}{2::1:2:0:0:0:0:0::12}{13}
>\listentry{section}{12}{2.1}{Notation}{2::1:2:1:0:0:0:0::12}{13}
>(more stuff)
>\listentry{subsection}{78}{2.4.2}{Scaling the coordinate system}{2::1:2:4:2:0:0:0::31}{32}
>\listentry{part}{79}{2}{Mathematical tools}{2::2:2:4:2:0:0:0::34}{35}
>\listentry{chapter}{82}{3}{B�zier cubic analysis}{2::2:3:0:0:0:0:0::35}{36}
>
>OOOPSIE! Since resetnumber=no, the listentry keeps the old
>settings for chapter, section & the like. This is obviously
>wrong. Even if the number is not reset, the sectionformat
>*must* be reset, since at the beginning of the new
>higher section(level) you are not in the previous one
>anymore. So for example when starting a new part (with
>resetnumber=no), and until
>the first chapter of the new part is started we are in
>chapter 0 for that part, not in chapter
>'last-chapter-from-previous-part'.
>
>Can this be fixed?
>
>
>
sure, but i need a small test file -)
Hans
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: No partial contents for parts after the first
2005-11-26 14:03 ` Re[2]: " Giuseppe Bilotta
@ 2005-11-28 13:03 ` Hans Hagen
0 siblings, 0 replies; 7+ messages in thread
From: Hans Hagen @ 2005-11-28 13:03 UTC (permalink / raw)
Giuseppe Bilotta wrote:
>Friday, November 25, 2005 Giuseppe Bilotta wrote:
>
>
>
>>Thursday, November 24, 2005 Giuseppe Bilotta wrote:
>>
>>
>
>
>
>>>I'm using the latest ConTeXt reported here, and I'm noticing
>>>that partial contents for the second, third etc part are not
>>>available. I have a bunch of files each of which goes like
>>>
>>>
>
>
>
>>>\part{some part}
>>>
>>>
>
>
>
>>>Some text (not always)
>>>
>>>
>
>
>
>>>\placecontent
>>>
>>>
>
>
>
>>>\chapter{some chapter}
>>>
>>>
>
>
>
>>>Each of this file is \input from the master file. However,
>>>only in the first part you actually see the (part-specific)
>>>content: every other part reports
>>>
>>>
>
>
>
>>>system : part,chapter,section,subsection not found/processed
>>>
>>>
>
>
>
>
>>>The setup for the contents is as follows:
>>>
>>>
>
>
>
>>>\setupcombinedlist[content]
>>> [interaction=all,
>>> partnumber=no,
>>> alternative=c,
>>> level=subsection]
>>>
>>>
>
>
>
>>>\setuphead[part][alternative=middle,placehead=yes,resetnumber=no]
>>>
>>>
>
>
>
>>>The problem is the 'resetnumber': if I take that off,
>>>everything works perfectly.
>>>
>>>
>
>
>
>>I've been debugging this, and the reason for the thing not
>>coming up for parts after the first is that when
>>resetnumber=no the current level is not properly detected:
>>in one case you get
>>
>>
>
>
>
>>\currentlevel ->:1
>>
>>
>
>
>
>>in the other
>>
>>
>
>
>
>>\currentlevel ->:2:2:4:2
>>
>>
>
>
>
>>Which is obviously wrong. Indeed, the problem is here:
>>
>>
>
>
>
>>\listentry{part}{1}{1}{Introduction}{2::1:0:0:0:0:0:0::7}{8}
>>\listentry{chapter}{2}{1}{Presentation}{2::1:1:0:0:0:0:0::8}{9}
>>\listentry{section}{3}{1.1}{History and
>>motivation}{2::1:1:1:0:0:0:0::8}{9}
>>\listentry{chapter}{11}{2}{The
>>basics}{2::1:2:0:0:0:0:0::12}{13}
>>\listentry{section}{12}{2.1}{Notation}{2::1:2:1:0:0:0:0::12}{13}
>>(more stuff)
>>\listentry{subsection}{78}{2.4.2}{Scaling the
>>coordinate system}{2::1:2:4:2:0:0:0::31}{32}
>>\listentry{part}{79}{2}{Mathematical
>>tools}{2::2:2:4:2:0:0:0::34}{35}
>>\listentry{chapter}{82}{3}{B�zier cubic
>>analysis}{2::2:3:0:0:0:0:0::35}{36}
>>
>>
>
>
>
>>OOOPSIE! Since resetnumber=no, the listentry keeps the old
>>settings for chapter, section & the like. This is obviously
>>wrong. Even if the number is not reset, the sectionformat
>>*must* be reset, since at the beginning of the new
>>higher section(level) you are not in the previous one
>>anymore. So for example when starting a new part (with
>>resetnumber=no), and until
>>the first chapter of the new part is started we are in
>>chapter 0 for that part, not in chapter
>>'last-chapter-from-previous-part'.
>>
>>
>
>
>
>>Can this be fixed?
>>
>>
>
>
>Ok, I came up with a solution that seems to work:
>
>\def\definesection[#1]%
> {\doifundefined{\??se#1}
> {\doifelsenothing\firstsection
> {\def\firstsection{#1}%
> \setevalue{\??se#1\c!before}{\v!text}%
> \setevalue{\??se\v!text\c!after}{#1}}
> {\setevalue{\??se\commalistelement\c!after}{#1}%
> \setevalue{\??se#1\c!before}{\lastsection}%
> \setevalue{\??se\lastsection\c!after}{#1}}%
> \advance\nofsections \plusone
> \setevalue{\??se#1\c!level}{\the\nofsections}%
> \letvalue{\??se#1\c!after}\empty
> \setvalue{\e!next#1}{\@@nextsectionnumber{#1}}%
> \setvalue{#1\c!number}{\@@longsectionnumber{#1}}%
> \setvalue{#1\s!format}{\@@longformatnumber{#1}}%
> \setevalue{\??by#1}{#1}%
> \setevalue{\??by\v!by#1}{#1}%
> \makecounter{\??se#1}%
> \makecounter{\??se lastvalueof#1}% GB
> \edef\lastsection{#1}%
> \setvalue{\??sk#1}{#1}%
> \letvalue{\??se#1\c!marking}\empty
> \setupsection[#1][\c!previousnumber=\v!yes]}}%
>
>% New command preserves the value of the next sectionlevel
>% when resetnumber=no
>
>\def\checkpreservevalueafter#1%
> {\ifnum\getvalue{\??se#1\c!level}<\the\nofsections
> \edef\preservedsection{\getvalue{\??se#1\c!after}}%
> \ifconditional\@@resetsubheadnumbers
> \setcounter{\??se lastvalueof\preservedsection}%
> {0}%
> \else
> \setcounter{\??se lastvalueof\preservedsection}%
> {\countervalue{\??se\preservedsection}}%
> \fi
> \fi}
>
>\def\@@setsectionnumber#1#2%
> {\letgvalueempty{\??se#1\s!start}% signal i.p.v. boolean
> \setcounter{\??se#1}{#2}%
> \checkpreservevalueafter{#1}
> \resetsectioncounters{#1}
> \checkpagecounter}
>
>\def\@@nextsectionnumber#1%
> {\letgvalueempty{\??se#1\s!start}% signal i.p.v. boolean
> \ifnum\countervalue{\??se lastvalueof#1}>\zerocount
> \setcounter{\??se#1}{\countervalue{\??se lastvalueof#1}}
> \setcounter{\??se lastvalueof#1}{0}
> \fi
> \pluscounter{\??se#1}%
> \checkpreservevalueafter{#1}
> \resetsectioncounters{#1}
> \checkpagecounter}
>
>This has been tested in a fairly complex document (some
>levels with resetnumber=no, some with the usual resetnumber;
>sectionblocks etc). It works, and fixes the placecontent not
>working. Will this go into mainline?
>
>
>
no problem, until some other problem shows up -)
Hans
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re[2]: No partial contents for parts after the first
2005-11-28 13:01 ` Hans Hagen
@ 2005-11-28 15:49 ` Giuseppe Bilotta
0 siblings, 0 replies; 7+ messages in thread
From: Giuseppe Bilotta @ 2005-11-28 15:49 UTC (permalink / raw)
Monday, November 28, 2005 Hans Hagen wrote:
> sure, but i need a small test file -)
\setuphead[part][placehead=yes,resetnumber=no]
\starttext
\part{Part one}
\placecontent
\chapter{One}
\section{One-one}
\chapter{Two}
\section{Two-one}
\part{Part two}
\placecontent
\chapter{Three}
\chapter{Four}
\section{Four-one}
\stoptext
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-11-28 15:49 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-11-24 19:26 No partial contents for parts after the first Giuseppe Bilotta
2005-11-25 17:37 ` Giuseppe Bilotta
2005-11-25 18:24 ` Giuseppe Bilotta
2005-11-26 14:03 ` Re[2]: " Giuseppe Bilotta
2005-11-28 13:03 ` Hans Hagen
2005-11-28 13:01 ` Hans Hagen
2005-11-28 15:49 ` Re[2]: " Giuseppe Bilotta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).