* How do I create a table like this in ConTeXt?
@ 2005-03-18 21:33 Gerben Wierda
2005-03-19 19:38 ` Willi Egger
0 siblings, 1 reply; 10+ messages in thread
From: Gerben Wierda @ 2005-03-18 21:33 UTC (permalink / raw)
In LaTeX, a tabular environment produces a box which then can be part
of another tabular. I tried to do the same with ConTeXt, but failed.
Can someone tell me how to produce
http://mail.rna.nl/~gerben/latex-table.pdf
with ConTeXt?
Thanks,
G
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-18 21:33 How do I create a table like this in ConTeXt? Gerben Wierda
@ 2005-03-19 19:38 ` Willi Egger
2005-03-21 19:18 ` Gerben Wierda
2005-03-21 19:34 ` Gerben Wierda
0 siblings, 2 replies; 10+ messages in thread
From: Willi Egger @ 2005-03-19 19:38 UTC (permalink / raw)
Hi Gerben,
There are different options.
first of all I would have a look into \bTABLE ...\eTABLE constructs see
enatab.pdf manual.
secondly you might use \starttabulate ..\stoptabulate look at MAPS22
Voorjaar 1999, pp 153.
Willi
Gerben Wierda wrote:
> In LaTeX, a tabular environment produces a box which then can be part of
> another tabular. I tried to do the same with ConTeXt, but failed.
>
> Can someone tell me how to produce
>
> http://mail.rna.nl/~gerben/latex-table.pdf
>
> with ConTeXt?
>
> Thanks,
>
> G
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-19 19:38 ` Willi Egger
@ 2005-03-21 19:18 ` Gerben Wierda
2005-03-21 20:05 ` Thomas A.Schmitz
2005-03-21 20:06 ` Tobias Burnus
2005-03-21 19:34 ` Gerben Wierda
1 sibling, 2 replies; 10+ messages in thread
From: Gerben Wierda @ 2005-03-21 19:18 UTC (permalink / raw)
On 19 Mar 2005, at 20:38, Willi Egger wrote:
> Hi Gerben,
>
> There are different options.
> first of all I would have a look into \bTABLE ...\eTABLE constructs
> see enatab.pdf manual.
Where do I find this manual?
Thanks,
G
> secondly you might use \starttabulate ..\stoptabulate look at MAPS22
> Voorjaar 1999, pp 153.
>
> Willi
>
> Gerben Wierda wrote:
>> In LaTeX, a tabular environment produces a box which then can be part
>> of another tabular. I tried to do the same with ConTeXt, but failed.
>> Can someone tell me how to produce
>> http://mail.rna.nl/~gerben/latex-table.pdf
>> with ConTeXt?
>> Thanks,
>> G
>> _______________________________________________
>> ntg-context mailing list
>> ntg-context@ntg.nl
>> http://www.ntg.nl/mailman/listinfo/ntg-context
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-19 19:38 ` Willi Egger
2005-03-21 19:18 ` Gerben Wierda
@ 2005-03-21 19:34 ` Gerben Wierda
2005-03-22 0:04 ` Hans Hagen
1 sibling, 1 reply; 10+ messages in thread
From: Gerben Wierda @ 2005-03-21 19:34 UTC (permalink / raw)
On 19 Mar 2005, at 20:38, Willi Egger wrote:
> secondly you might use \starttabulate ..\stoptabulate look at MAPS22
> Voorjaar 1999, pp 153.
I did look at that. I cannot see how that helps me recreating the
example I posted, sorry.
G
PS. Is it me or is tabulating in ConTeXt a bit counterintuitive? For
instance, take the exampl efrom MAPS:
\starttabulate[|l|k2c|r|]
\NC this and that \NC left and right \NC here and there \NC \NR
Why 4(!) \NC's here? There are only 3 columns...
G
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-21 19:18 ` Gerben Wierda
@ 2005-03-21 20:05 ` Thomas A.Schmitz
2005-03-21 22:05 ` Gerben Wierda
2005-03-22 7:22 ` Gerben Wierda
2005-03-21 20:06 ` Tobias Burnus
1 sibling, 2 replies; 10+ messages in thread
From: Thomas A.Schmitz @ 2005-03-21 20:05 UTC (permalink / raw)
You can download it here:
https://www.pragma-pod.com/dir/general/manuals/enattab.pdf
Best
Thomas
On Mar 21, 2005, at 8:18 PM, Gerben Wierda wrote:
> Where do I find this manual?
>
> Thanks,
>
> G
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-21 19:18 ` Gerben Wierda
2005-03-21 20:05 ` Thomas A.Schmitz
@ 2005-03-21 20:06 ` Tobias Burnus
2005-03-22 0:08 ` Hans Hagen
1 sibling, 1 reply; 10+ messages in thread
From: Tobias Burnus @ 2005-03-21 20:06 UTC (permalink / raw)
Hi,
Gerben Wierda wrote:
> On 19 Mar 2005, at 20:38, Willi Egger wrote:
>> There are different options.
>> first of all I would have a look into \bTABLE ...\eTABLE constructs
>> see enatab.pdf manual.
> Where do I find this manual?
As always: Go to http://www.pragma-ade.com/dir/ and look around.
http://www.pragma-ade.com/general/manuals/enattab.pdf
> \starttabulate[|l|k2c|r|]
> \NC this and that \NC left and right \NC here and there \NC \NR
>
> Why 4(!) \NC's here? There are only 3 columns...
Well, in prinziple two \NC would be enough "col1 \NC col2 \NC col3 \NR";
but the idea is seeming as follows:
anytime a new column begins/ends the \NC is added, add it always when
you would add a vertical line in a table (though nice-looking tables
shan't have that many "|").
Tobias
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-21 20:05 ` Thomas A.Schmitz
@ 2005-03-21 22:05 ` Gerben Wierda
2005-03-22 7:22 ` Gerben Wierda
1 sibling, 0 replies; 10+ messages in thread
From: Gerben Wierda @ 2005-03-21 22:05 UTC (permalink / raw)
On 21 Mar 2005, at 21:05, Thomas A.Schmitz wrote:
> You can download it here:
>
> https://www.pragma-pod.com/dir/general/manuals/enattab.pdf
That link did not work, but going one dir higher and then selecting
worked. Thanks.
G
>
> Best
>
> Thomas
>
> On Mar 21, 2005, at 8:18 PM, Gerben Wierda wrote:
>
>> Where do I find this manual?
>>
>> Thanks,
>>
>> G
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-21 19:34 ` Gerben Wierda
@ 2005-03-22 0:04 ` Hans Hagen
0 siblings, 0 replies; 10+ messages in thread
From: Hans Hagen @ 2005-03-22 0:04 UTC (permalink / raw)
Gerben Wierda wrote:
> On 19 Mar 2005, at 20:38, Willi Egger wrote:
>
>> secondly you might use \starttabulate ..\stoptabulate look at MAPS22
>> Voorjaar 1999, pp 153.
>
>
> I did look at that. I cannot see how that helps me recreating the
> example I posted, sorry.
>
> G
>
> PS. Is it me or is tabulating in ConTeXt a bit counterintuitive? For
> instance, take the exampl efrom MAPS:
>
> \starttabulate[|l|k2c|r|]
> \NC this and that \NC left and right \NC here and there \NC \NR
>
> Why 4(!) \NC's here? There are only 3 columns...
to keep it kind of code-compatible with the starttable mechanism where each
column is separated by NC or VL or .. ; just consider NC to be a column boundary
mark
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-21 20:06 ` Tobias Burnus
@ 2005-03-22 0:08 ` Hans Hagen
0 siblings, 0 replies; 10+ messages in thread
From: Hans Hagen @ 2005-03-22 0:08 UTC (permalink / raw)
Tobias Burnus wrote:
> Well, in prinziple two \NC would be enough "col1 \NC col2 \NC col3 \NR";
interesting thought -)
as with most table mechanism that use halign, some separator is needed; also, in
context actually there are (hidden) extra columns used for spacing issues;
i once had a bunch of macros that took the ibm line/corner chars as separators,
kind of ascii wysiwyg
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: How do I create a table like this in ConTeXt?
2005-03-21 20:05 ` Thomas A.Schmitz
2005-03-21 22:05 ` Gerben Wierda
@ 2005-03-22 7:22 ` Gerben Wierda
1 sibling, 0 replies; 10+ messages in thread
From: Gerben Wierda @ 2005-03-22 7:22 UTC (permalink / raw)
On 21 Mar 2005, at 21:05, Thomas A.Schmitz wrote:
> You can download it here:
>
> https://www.pragma-pod.com/dir/general/manuals/enattab.pdf
Having looked at these examples, I wonder if there is also a good
description somewhere. For instance, how do I influence borders of
cells? Can I have a dashed border (as in my LaTeX example which btw
uses hvdashline.sty).
G
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-03-22 7:22 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-03-18 21:33 How do I create a table like this in ConTeXt? Gerben Wierda
2005-03-19 19:38 ` Willi Egger
2005-03-21 19:18 ` Gerben Wierda
2005-03-21 20:05 ` Thomas A.Schmitz
2005-03-21 22:05 ` Gerben Wierda
2005-03-22 7:22 ` Gerben Wierda
2005-03-21 20:06 ` Tobias Burnus
2005-03-22 0:08 ` Hans Hagen
2005-03-21 19:34 ` Gerben Wierda
2005-03-22 0:04 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).