ntg-context - mailing list for ConTeXt users
 help / color / mirror / Atom feed
* Re: Installation of Context (on MikTeX)
@ 2000-11-02 16:17 michou
  2000-11-02 17:12 ` Hans Hagen
  0 siblings, 1 reply; 4+ messages in thread
From: michou @ 2000-11-02 16:17 UTC (permalink / raw)


>Adding the path to the ini file should work ok. But, can you try a newer
>texexec (version 2.3 now) 

I tried with the last beta version, but the problem is still the same.
Perhaps 
there is something wrong with my ini file.
The format file is found but it appears that when it is passed to pdftex,
there
is no double quotes around it. In the MikTeX distribution it seems that the
format passed to pdftex has to be enclosed around quotes. When I try the
command :
        pdftex    "&d:\\cont-en.fmt" test.tex
 then I get a correct test.dvi file. But no pdf file. (The output is at the
end)

Is there a way to  automaticly put quotes as above with texexec ? Could
that be the problem ?

Yanick Michou
----------------------------------------------------------------------------
---------------------------------------
> D:\texmf\context\perltk>texexec --format="d:\\cont-en.fmt" --verbose
test.tex

TeXExec 2.3 - ConTeXt / PRAGMA ADE 1997-2000

     locating ini file : kpsewhich not found in path
     locating ini file : found by searching
               reading : .\texexec.ini
...
            executable : pdftex
                format : d:\\cont-en.fmt
             inputfile : test

pdftex    &d:\\cont-en.fmt test

This is pdfTeX, Version 3.14159-14e-released-20000217 (MiKTeX 1.20e
(Snapshot build 187))
**
! End of file on the terminal... why?òÊ???ù­9t_?é³?´b?????: not found
òÊ???ù­9t_?é³?´b?????: not found
9t_?é³?´b?????: not found
9t_?é³?´b?????: not found
é³?: not found
é³?: not found

              run time : 0 seconds
----------------------------------------------------------------------------
--------------------------------------------

----------------------------------------------------------------------------
--------------------------------------------
D:\texmf\context\perltk>pdftex "&d:/cont-en" test.tex
This is pdfTeX, Version 3.14159-14e-released-20000217 (MiKTeX 1.20e
(Snapshot bu
ild 187))
(test.tex{pdftex.cfg}

ConTeXt  ver: 2000.10.3  fmt: 2000.11.2  int: english  mes: english

language       : language en is active
system         : cont-new loaded
(d:\texmf\tex\context\base\cont-new.tex
systems        : beware: some patches loaded from cont-new.tex!
)
system         : cont-old loaded
(d:\texmf\tex\context\base\cont-old.tex
loading        : Context Old Macros
)
system         : cont-fil loaded
(d:\texmf\tex\context\base\cont-fil.tex
loading        : Context File Synonyms
)
bodyfont       : 12pt rm is loaded
language       : patterns 2-en-2 2-uk-2 2-de-2 2-fr-2 2-sp-2 loaded
specials       : tex,postscript,rokicki loaded
systems        : begin file test at line 1
[1.1]
systems        : end file test at line 3
 )
Output written on test.dvi (1 page, 428 bytes).
Transcript written on test.log.

D:\texmf\context\perltk>


^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: Installation of Context (on MikTeX)
@ 2000-10-31 17:46 michou
  2000-11-01  9:04 ` Hans Hagen
  0 siblings, 1 reply; 4+ messages in thread
From: michou @ 2000-10-31 17:46 UTC (permalink / raw)


By including the format file parameter in the command line, in this way (2
backslashes needed), the format file seems to be found :

>texexec --verbose --format=d:\\localtexmf\\miktex\\fmt\\cont-en.fmt test.tex

It doesn't work when the format file is specified in the texexec.ini file
because it seems  that  the extension ".fmt" is needed and that does not
appear in this case.

The test file is just this one :
\starttext
 \framed {Let's see if it works}
\stoptext

>From the output (at the end), it seems that some files are not found again.
But I can't figure out which ones ? 
I should specify also that no  output  file (test.pdf) is created here.

I probably need to specify more paths but it is not clear which ones either.

Thanks again for any information.

Yanick Michou

The result resulting output is as follows :

----------------------------------------------------------------------------
-----
 TeXExec 2.0 - ConTeXt / PRAGMA ADE 1997-2000

     locating ini file : kpsewhich not found in path
     locating ini file : found by searching
               reading : d:\LOCALT~2\context\perltk\texexec.ini
               setting : 'TeXShell' to 'miktex' for 'all'
               setting : 'UsedInterfaces' to 'en,nl,de,uk' for 'all'
               setting : 'UserInterface' to 'en' for 'all'
               setting : 'TeXExecutable' to 'tex' for 'all'
               setting : 'MpExecutable' to 'mpost' for 'all'
               setting : 'MpToTeXExecutable' to 'mpto' for 'all'
               setting : 'DviToMpExecutable' to 'dvitomp' for 'all'
               setting : 'DviSpecialScript' to 'dvispec' for 'all'
               setting : 'MpFormat' to 'metafun' for 'all'
               setting : 'TeXFormatFlag' to '&' for 'all'
               setting : 'MpFormatFlag' to '&' for 'all'
               setting : 'TeXFontsPath' to
'd:\\texmf\\fonts\\";"d:\\localtexmf\\fonts' for 'all'
               setting : 'UsedInterfaces' to 'en,nl,de,uk' for 'miktex'
               setting : 'UserInterface' to 'en' for 'miktex'
               setting : 'TeXExecutable' to 'pdftex' for 'miktex'
               setting : 'TeXVirginFlag' to '--initialize' for 'miktex'
               setting : 'TeXBatchString' to '' for 'miktex'
               setting : 'MpVirginFlag' to '-ini' for 'miktex'
               setting : 'MpPassString' to '' for 'miktex'
               setting : 'MpBatchString' to '' for 'miktex'

          used setting : TeXShell = miktex
          used setting : SetupPath =
          used setting : UserInterface = en
          used setting : UsedInterfaces = en,nl,de,uk
          used setting : TeXFontsPath =
d:\\texmf\\fonts\\";"d:\\localtexmf\\fonts
          used setting : MpExecutable = mpost
          used setting : MpToTeXExecutable = mpto
          used setting : DviToMpExecutable = dvitomp
          used setting : TeXProgramPath =
          used setting : TeXFormatPath =
          used setting : ConTeXtPath =
          used setting : TeXScriptsPath =
          used setting : TeXExecutable = pdftex
          used setting : TeXVirginFlag = --initialize
          used setting : TeXPassString =
          used setting : TeXFormatFlag = &
          used setting : FmtLanguage =
          used setting : FmtBodyFont =
          used setting : TcXPath =

            executable : pdftex
                format : d:\\localtexmf\\miktex\\\fmt\\\cont-en.fmt
             inputfile : test

pdftex    &d:\\localtexmf\\miktex\\\fmt\\\cont-en.fmt test

This is pdfTeX, Version 3.14159-14e-released-20000217 (MiKTeX 1.20e
(Snapshot bu
ild 187))
**
! End of file on the terminal... why?òÊ???ù­9t_?ʳ?+b?????: not found
òÊ???ù­9t_?ʳ?+b?????: not found
9t_?ʳ?+b?????: not found
9t_?ʳ?+b?????: not found
ʳ?: not found
ʳ?: not found

              run time : 1 seconds
----------------------------------------------------------------------------
-----


^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2000-11-02 17:12 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-11-02 16:17 Installation of Context (on MikTeX) michou
2000-11-02 17:12 ` Hans Hagen
  -- strict thread matches above, loose matches on Subject: below --
2000-10-31 17:46 michou
2000-11-01  9:04 ` Hans Hagen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).