* installation
@ 2002-04-06 11:52 Thomas Lohmann
2002-04-07 9:34 ` installation Hans Hagen
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Thomas Lohmann @ 2002-04-06 11:52 UTC (permalink / raw)
Hi everybody,
I tried to update pdftex and context on SuSE-Linux 7.0, using the
tetex-version which comes with 7.0. After solving a couple of problems,
there are obviously some left. I hope, the problems exist due to some
path definition and some of you can help:
Running the following small test program
\setupoutput[pdftex]
\starttext
This is a test.
\stoptext
leads to the messages (reduced)
TeXExec 2.6 - ConTeXt / PRAGMA ADE 1997-2001
executable : pdfetex
format : cont-en
inputfile : test
output : standard
interface : en
current mode : all
TeX run : 1
This is pdfeTeX, Version 3.14159-14h-released-20010417-2.1 (Web2C
7.3.3.1)
entering extended mode
(./test.tex{/usr/share/texmf/pdftex/config/pdftex.cfg}
ConTeXt ver: 2001.11.13 fmt: 2002.4.1 int: english mes: english
language : language en is active
system : cont-new loaded
(/usr/share/texmf/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex!
system (E-TEX) : [line 473] \ifcsname
)
system : cont-old loaded
(/usr/share/texmf/tex/context/base/cont-old.tex
loading : Context Old Macros
)
system : cont-fil loaded
(/usr/share/texmf/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
bodyfont : 12pt rm is loaded
language : patterns 2-en-2 2-uk-2 2-de-2 2-fr-2 2-nl-2 loaded
specials : tex,postscript,rokicki loaded
system : test.top loaded
(./test.top) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo)
(./test.tuo)
(./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo)
(./test.tuo)
specials : tex,postscript,rokicki is reset
specials : loading definition file tpd
(/usr/share/texmf/tex/context/base/spec-tpd.tex
specials : loading definition file fdf
(/usr/share/texmf/tex/context/base/spec-fdf.tex <unprotect 3> <protect
3>)
specials : fdf loaded
)
specials : fdf,tpd loaded
(./test.tuo) (./test.tuo)
systems : begin file test at line 14
[1.1{/var/lib/texmf/dvips/config/psfonts.map
Warning: pdfetex (file /var/lib/texmf/dvips/config/psfonts.map): invalid
entry
for `pagd8r': font file missing
Warning: pdfetex (file /var/lib/texmf/dvips/config/psfonts.map): invalid
entry
for `pagdo8r': font file missing
[...]
Warning: pdfetex (file /var/lib/texmf/dvips/config/psfonts.map): invalid
entry
for `pcrr8rn': SlantFont/ExtendFont can be used only with embedded T1
fonts
Warning: pdfetex (file /var/lib/texmf/dvips/config/psfonts.map): invalid
entry
for `tibo': SlantFont/ExtendFont can be used only with embedded T1 fonts
Warning: pdfetex (file /var/lib/texmf/dvips/config/psfonts.map): invalid
entry
for `tio': SlantFont/ExtendFont can be used only with embedded T1 fonts
}{/usr/share/texmf/pdftex/config/lw35.map}{/usr/share/texmf/pdftex/config/rawfo
nts.map
Warning: pdfetex (file /usr/share/texmf/pdftex/config/rawfonts.map):
entry for
`rpcrr' already exists, duplicates ignored
Warning: pdfetex (file /usr/share/texmf/pdftex/config/rawfonts.map):
entry for
`rpcrb' already exists, duplicates ignored
[...]
Warning: pdfetex (file /usr/share/texmf/pdftex/config/rawfonts.map):
entry for
`rpzdr' already exists, duplicates ignored
}
Warning: pdfetex (file csfontd.mapfile): cannot open font map file
]
systems : end file test at line 18
)
Warning: pdfetex (file cmr12): Font cmr12 at 600 not found
Output written on test.pdf (1 page, 811 bytes).
Transcript written on test.log.
run time : 3 seconds
sorting and checking : running texutil
TeXUtil 7.3 - ConTeXt / PRAGMA ADE 1992-2000
action : processing commands, lists and registers
option : sorting IJ under Y
option : converting high ASCII values
input file : test.tui
output file : test.tuo
passed commands : 6
remapped keys : 0
register entries : 0 -> 0 entries 0 references
synonym entries : 0 -> 0 entries
embedded files : 1
total run time : 4 seconds
The fonts are located on the system, e. g.
"/usr/share/texmf/fonts/tfm/adobe/avantgar/pagdo8r.tfm".
Thanks for any help,
regards
Thomas Lohmann
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: installation
2002-04-06 11:52 installation Thomas Lohmann
@ 2002-04-07 9:34 ` Hans Hagen
2002-04-07 19:26 ` installation Henning Hraban Ramm
2002-04-08 6:54 ` installation Patrick Gundlach
2 siblings, 0 replies; 10+ messages in thread
From: Hans Hagen @ 2002-04-07 9:34 UTC (permalink / raw)
Cc: ntg-context
At 01:52 PM 4/6/2002 +0200, Thomas Lohmann wrote:
>Warning: pdfetex (file /var/lib/texmf/dvips/config/psfonts.map): invalid
>entry
>for `pagd8r': font file missing
is this font used (if so, it's not installed)
Warning: pdfetex (file /var/lib/texmf/dvips/config/psfonts.map): invalid
>entry
>for `pcrr8rn': SlantFont/ExtendFont can be used only with embedded T1
>fonts
such messages are often harmless
>rpzdr' already exists, duplicates ignored
redefinition/overloading will be handled in next versions of pdftex
>Warning: pdfetex (file cmr12): Font cmr12 at 600 not found
real bad news: looks like you have no fonts on your system!
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
fall-back web server:
www.pragma-ade.nl
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: installation
2002-04-06 11:52 installation Thomas Lohmann
2002-04-07 9:34 ` installation Hans Hagen
@ 2002-04-07 19:26 ` Henning Hraban Ramm
2002-04-08 6:54 ` installation Patrick Gundlach
2 siblings, 0 replies; 10+ messages in thread
From: Henning Hraban Ramm @ 2002-04-07 19:26 UTC (permalink / raw)
Am Samstag, 6. April 2002 13:52 schrieb Thomas Lohmann:
1. Did you run texhash (aka mktexlsr)?
> This is pdfeTeX, Version 3.14159-14h-released-20010417-2.1 (Web2C
2. pdfTeX is rather old. Try an 1.0(pre) release.
--
Grüßlis vom Hraban!
---
http://www.fiee.net/texnique/
---
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: installation
2002-04-06 11:52 installation Thomas Lohmann
2002-04-07 9:34 ` installation Hans Hagen
2002-04-07 19:26 ` installation Henning Hraban Ramm
@ 2002-04-08 6:54 ` Patrick Gundlach
2 siblings, 0 replies; 10+ messages in thread
From: Patrick Gundlach @ 2002-04-08 6:54 UTC (permalink / raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 226 bytes --]
Hallo Thomas
> (./test.tex{/usr/share/texmf/pdftex/config/pdftex.cfg}
it would be interesting what this file looks like
and that one:
> [1.1{/var/lib/texmf/dvips/config/psfonts.map
--
Viele Grüße,
Patrick Gundlach
^ permalink raw reply [flat|nested] 10+ messages in thread
* Installation
@ 2002-09-13 16:28 Roger Mason
2002-09-13 17:12 ` Installation David Antos
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Roger Mason @ 2002-09-13 16:28 UTC (permalink / raw)
Hello,
I am new to ConTeXt and am setting it up on a Linux (RH7.0) system with
the teTeX distribution. I downloaded cont-tmf.zip from the PRAGMA site
and have followed along the instructions in minstall.pdf. When I get to
texexec --make en nl
(invoked as root), I get:
TeXExec 1.9 - ConTeXt / PRAGMA ADE 1997-2000
error : TeXFontsPath set to unknown path
l:/tex/texmf;l:/tex/texmf-local;/
This is pdfeTeX, Version 3.14159-13d-2.1 (Web2C 7.3.1) (INITEX)
entering extended mode
(/usr/share/texmf/tex/context/config/cont-en.ini
(/usr/share/texmf/tex/context/base/cont-en.tex
(/usr/share/texmf/tex/context/base/context.tex
! I can't find file `syst-pln.tex'.
l.34 \input syst-pln.tex
% stripped plain
Please type another input file name:
! Emergency stop.
l.34 \input syst-pln.tex
% stripped plain
No pages of output.
Transcript written on cont-en.log.
fmtutil: `pdfetex -ini -efmt=cont-en -progname=context *cont-en.ini'
failed.
This is pdfeTeX, Version 3.14159-13d-2.1 (Web2C 7.3.1) (INITEX)
entering extended mode
(/usr/share/texmf/tex/context/config/cont-nl.ini
(/usr/share/texmf/tex/context/base/cont-nl.tex
(/usr/share/texmf/tex/context/base/context.tex
! I can't find file `syst-pln.tex'.
l.34 \input syst-pln.tex
% stripped plain
Please type another input file name:
! Emergency stop.
l.34 \input syst-pln.tex
% stripped plain
No pages of output.
Transcript written on cont-nl.log.
fmtutil: `pdfetex -ini -efmt=cont-nl -progname=context *cont-nl.ini'
failed.
executable : pdfetex
format(s) : en nl
Can anyone help?
Thanks
Roger Mason
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Installation
2002-09-13 16:28 Installation Roger Mason
@ 2002-09-13 17:12 ` David Antos
2002-09-13 20:19 ` Installation Roger Mason
2002-09-13 23:58 ` Installation Matthew Huggett
2002-09-14 7:32 ` Installation Henning Hraban Ramm
2 siblings, 1 reply; 10+ messages in thread
From: David Antos @ 2002-09-13 17:12 UTC (permalink / raw)
Cc: NTG ConTeXt Mailing List
On Fri, Sep 13, 2002 at 01:58:30PM -0230, Roger Mason wrote:
> ! I can't find file `syst-pln.tex'.
> l.34 \input syst-pln.tex
> % stripped plain
Have you run texhash (or mktexlsr) before generating the format?
D.A.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Installation
2002-09-13 17:12 ` Installation David Antos
@ 2002-09-13 20:19 ` Roger Mason
0 siblings, 0 replies; 10+ messages in thread
From: Roger Mason @ 2002-09-13 20:19 UTC (permalink / raw)
Hello again,
Firstly thanks to David Antos for his help on my previous post: that fixed
one problem.
Again, following the installation manual I have run the command:
texexec --make metafun
with the following result:
TeXExec 1.9 - ConTeXt / PRAGMA ADE 1997-2000
error : SetupPath set to unknown path
/usr/share/texmf/tex/base/
fmtutil: no info for format `cont-metafun'.
executable : pdfetex
format(s) : metafun
Evidently something is incorrect in the texexec.ini file. Unfortunately, I
don't know exactly what files (or kinds of files) the different variables
in that file should point to. If someone could please provide this
information I'd be most grateful. I give below the result of
texexec --verbose
Thanks,
Roger Mason
TeXExec 1.9 - ConTeXt / PRAGMA ADE 1997-2000
locating ini file : found by kpsewhich
reading : /usr/share/texmf/context/config/texexec.ini
setting : 'TeXFontsPath' to '/usr/share/texmf' for 'all'
setting : 'TeXFormatPath' to '/usr/share/texmf' for 'all'
setting : 'ConTeXtPath' to
'/usr/share/texmf/tex/context/base' for 'all'
setting : 'SetupPath' to '/usr/share/texmf/tex/base' for
'all'
error : SetupPath set to unknown path
/usr/share/texmf/tex/base/
setting : 'TeXShell' to 'tetex' for 'all'
setting : 'UsedInterfaces' to 'en nl metafun mptopdf' for
'all'
setting : 'UserInterface' to 'en' for 'all'
setting : 'TeXExecutable' to 'tex' for 'all'
setting : 'MpExecutable' to 'mpost' for 'all'
setting : 'MpToTeXExecutable' to 'mpto' for 'all'
setting : 'DviToMpExecutable' to 'dvitomp' for 'all'
setting : 'DviSpecialScript' to 'dvispec' for 'all'
setting : 'MpFormat' to 'metafun' for 'all'
setting : 'TeXFormatFlag' to '&' for 'all'
setting : 'MpFormatFlag' to '&' for 'all'
setting : 'TeXExecutable' to 'pdfetex' for 'tetex'
setting : 'TeXVirginFlag' to '-ini' for 'tetex'
setting : 'TeXPassString' to '-progname=context' for
'tetex'
setting : 'TeXBatchFlag' to '-int=batchmode' for 'tetex'
setting : 'MpToTeXExecutable' to 'mpto' for 'tetex'
setting : 'MpVirginFlag' to '-ini' for 'tetex'
setting : 'MpPassString' to '-progname=mpost' for 'tetex'
setting : 'MpBatchFlag' to '-int=batchmode' for 'tetex'
used setting : TeXShell = tetex
used setting : SetupPath = /usr/share/texmf/tex/base
used setting : UserInterface = en
used setting : UsedInterfaces = en nl metafun mptopdf
used setting : MpExecutable = mpost
used setting : MpToTeXExecutable = mpto
used setting : DviToMpExecutable = dvitomp
used setting : TeXProgramPath =
used setting : TeXFormatPath = /usr/share/texmf
used setting : ConTeXtPath = /usr/share/texmf/tex/context/base
used setting : TeXScriptsPath =
used setting : TeXExecutable = pdfetex
used setting : TeXVirginFlag = -ini
used setting : TeXPassString = -progname=context
used setting : TeXFormatFlag = &
used setting : FmtLanguage =
used setting : FmtBodyFont =
used setting : TcXPath =
locating fmtutil : found
--help show this or more, e.g. '--help interface'
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Installation
2002-09-13 16:28 Installation Roger Mason
2002-09-13 17:12 ` Installation David Antos
@ 2002-09-13 23:58 ` Matthew Huggett
2002-09-14 7:32 ` Installation Henning Hraban Ramm
2 siblings, 0 replies; 10+ messages in thread
From: Matthew Huggett @ 2002-09-13 23:58 UTC (permalink / raw)
Cc: ntg-context
----- Original Message -----
From: "Roger Mason" <rmason@sparky2.esd.mun.ca>
To: "ConTeXt" <ntg-context@ntg.nl>
Sent: Saturday, September 14, 2002 1:28 AM
Subject: Installation
> Hello,
>
> I am new to ConTeXt and am setting it up on a Linux (RH7.0) system with
> the teTeX distribution. I downloaded cont-tmf.zip from the PRAGMA site
> and have followed along the instructions in minstall.pdf. When I get to
>
> texexec --make en nl
>
> (invoked as root), I get:
>
> TeXExec 1.9 - ConTeXt / PRAGMA ADE 1997-2000
>
> error : TeXFontsPath set to unknown path
> l:/tex/texmf;l:/tex/texmf-local;/
> This is pdfeTeX, Version 3.14159-13d-2.1 (Web2C 7.3.1) (INITEX)
> entering extended mode
> (/usr/share/texmf/tex/context/config/cont-en.ini
> (/usr/share/texmf/tex/context/base/cont-en.tex
> (/usr/share/texmf/tex/context/base/context.tex
> ! I can't find file `syst-pln.tex'.
> l.34 \input syst-pln.tex
> % stripped plain
> Please type another input file name:
> ! Emergency stop.
> l.34 \input syst-pln.tex
> % stripped plain
> No pages of output.
> Transcript written on cont-en.log.
> fmtutil: `pdfetex -ini -efmt=cont-en -progname=context *cont-en.ini'
> failed.
> This is pdfeTeX, Version 3.14159-13d-2.1 (Web2C 7.3.1) (INITEX)
> entering extended mode
> (/usr/share/texmf/tex/context/config/cont-nl.ini
> (/usr/share/texmf/tex/context/base/cont-nl.tex
> (/usr/share/texmf/tex/context/base/context.tex
> ! I can't find file `syst-pln.tex'.
> l.34 \input syst-pln.tex
> % stripped plain
> Please type another input file name:
> ! Emergency stop.
> l.34 \input syst-pln.tex
> % stripped plain
> No pages of output.
> Transcript written on cont-nl.log.
> fmtutil: `pdfetex -ini -efmt=cont-nl -progname=context *cont-nl.ini'
> failed.
>
> executable : pdfetex
> format(s) : en nl
>
> Can anyone help?
>
> Thanks
>
> Roger Mason
>
>
****************************************
From a previous mailing:
****************************************
Hi,
did you update your lsr?
'texconfig rehash'
should do the trick.
Andreas
On Sun, 2 Jun 2002, David Petrou wrote:
> Hi. I'm a new ConTeXt user. I'm installing over TeTeX. I know that
> TeTeX already has ConTeXt support, but I want to use a newer ConTeXt
> than came with my TeTeX distribution.
>
> I'm following the directions in the ConTeXt installation manual.
>
> I unzipping the ConTeXt archive, Then I made symlinks to all the .pl
> files, like:
>
> ln -s texexec.pl texexec
>
> and made sure that all the links I made were in my search path.
>
> I ran `fmtutil --edit' and saw that everything looked ok. But, when I
> run `fmtutil --all', I get:
>
> ----------------------------------------------------------------------
> This is pdfeTeX, Version 3.14159-13d-2.1 (Web2C 7.3.1) (INITEX)
> entering extended mode
> (/var/lib/texmf/tex/context/config/cont-cz.ini
> (/usr/share/texmf/tex/context/base/cont-cz.tex
> (/usr/share/texmf/tex/context/base/context.tex
> ! I can't find file `syst-pln.tex'.
> l.34 \input syst-pln.tex
> % stripped plain
> Please type another input file name:
> ! Emergency stop.
> l.34 \input syst-pln.tex
> % stripped plain
> No pages of output.
> Transcript written on cont-cz.log.
> fmtutil: `pdfetex -ini -efmt=cont-cz -progname=context *cont-cz.ini'
> failed.
> ----------------------------------------------------------------------
>
> I do have this file, though:
>
> ----------------------------------------------------------------------
> bash-2.04# pwd
> /usr/share/texmf
> bash-2.04# find . -name syst-pln.tex
> ./tex/context/base/syst-pln.tex
> ----------------------------------------------------------------------
>
> Anyway, I pressed on added `map +context.map' to my pdftex.cfg file.
> Then I copied texexec.rme to texexec.ini and ensured that TeXShell was
> set to tetex. Then I tried `texexec --make en de nl' and got:
>
> ----------------------------------------------------------------------
> TeXExec 2.8 - ConTeXt / PRAGMA ADE 1997-2002
>
> This is pdfeTeX, Version 3.14159-13d-2.1 (Web2C 7.3.1) (INITEX)
> entering extended mode
> (/var/lib/texmf/tex/context/config/cont-en.ini
> (/usr/share/texmf/tex/context/base/cont-en.tex
> (/usr/share/texmf/tex/context/base/context.tex
> ! I can't find file `syst-pln.tex'.
> l.34 \input syst-pln.tex
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Installation
2002-09-13 16:28 Installation Roger Mason
2002-09-13 17:12 ` Installation David Antos
2002-09-13 23:58 ` Installation Matthew Huggett
@ 2002-09-14 7:32 ` Henning Hraban Ramm
2002-09-14 8:23 ` Installation Henning Hraban Ramm
2 siblings, 1 reply; 10+ messages in thread
From: Henning Hraban Ramm @ 2002-09-14 7:32 UTC (permalink / raw)
Am Freitag, 13. September 2002 18:28 schrieb Roger Mason:
> I am new to ConTeXt and am setting it up on a Linux (RH7.0) system with
> the teTeX distribution. I downloaded cont-tmf.zip from the PRAGMA site
> and have followed along the instructions in minstall.pdf. When I get to
It seems you didn't download a recent version (look at
www.pragma-de.com/context/beta/cont-tmf.zip) or there is an older one on your
system:
> TeXExec 1.9 - ConTeXt / PRAGMA ADE 1997-2000
texexec is now at 3.2...
You should have a look at Bill's beginner's page (see link at one of my pages
below or at "third" at pragma's) or mine, if you understand german.
Grüßlis vom Hraban!
--
http://www.fiee.net/texnique/
http://www.ramm.ch/context/
---
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2002-09-14 8:23 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-04-06 11:52 installation Thomas Lohmann
2002-04-07 9:34 ` installation Hans Hagen
2002-04-07 19:26 ` installation Henning Hraban Ramm
2002-04-08 6:54 ` installation Patrick Gundlach
2002-09-13 16:28 Installation Roger Mason
2002-09-13 17:12 ` Installation David Antos
2002-09-13 20:19 ` Installation Roger Mason
2002-09-13 23:58 ` Installation Matthew Huggett
2002-09-14 7:32 ` Installation Henning Hraban Ramm
2002-09-14 8:23 ` Installation Henning Hraban Ramm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).