* XML command synonyms
@ 2003-09-25 12:57 Pawel Jackowski na Onet
2003-09-25 14:41 ` Willi Egger
2003-09-25 19:13 ` Simon Pepping
0 siblings, 2 replies; 10+ messages in thread
From: Pawel Jackowski na Onet @ 2003-09-25 12:57 UTC (permalink / raw)
Hi all!
Is there any way to define XML command synonyms? Assume that one defined
\deifneXMLenvirnment[subsubsubsubsection] {.......} {.......}
How to define 'SSSS' as a synonym of 'subsubsubsubsection' without wrtiting
the same code twice?
Thanks, Pawe/l
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: XML command synonyms
2003-09-25 12:57 XML command synonyms Pawel Jackowski na Onet
@ 2003-09-25 14:41 ` Willi Egger
2003-09-25 15:18 ` Willi Egger
2003-09-25 19:13 ` Simon Pepping
1 sibling, 1 reply; 10+ messages in thread
From: Willi Egger @ 2003-09-25 14:41 UTC (permalink / raw)
Hi Pawel
>
> Is there any way to define XML command synonyms? Assume that one defined
>
> \deifneXMLenvirnment[subsubsubsubsection] {.......} {.......}
>
> How to define 'SSSS' as a synonym of 'subsubsubsubsection' without
wrtiting
> the same code twice?
Though the following does not yet really work the solution must be looked
for in the following instructions to Context:
\definesection[SSSS]
\setupsection[SSSS][subsubsubsubsection] %the section SSSS inherits the
settings of subsubsubsubsection
\definehead[Pawel][section=SSSS]
Willi
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: XML command synonyms
2003-09-25 14:41 ` Willi Egger
@ 2003-09-25 15:18 ` Willi Egger
0 siblings, 0 replies; 10+ messages in thread
From: Willi Egger @ 2003-09-25 15:18 UTC (permalink / raw)
Sorry, apparently I missed part of the message while thinking of a solution.
Willi
----- Original Message -----
From: "Willi Egger" <w.egger@boede.nl>
To: <ntg-context@ntg.nl>
Sent: Thursday, September 25, 2003 4:41 PM
Subject: Re: [NTG-context] XML command synonyms
> Hi Pawel
> >
> > Is there any way to define XML command synonyms? Assume that one defined
> >
> > \deifneXMLenvirnment[subsubsubsubsection] {.......} {.......}
> >
> > How to define 'SSSS' as a synonym of 'subsubsubsubsection' without
> wrtiting
> > the same code twice?
>
> Though the following does not yet really work the solution must be looked
> for in the following instructions to Context:
>
> \definesection[SSSS]
> \setupsection[SSSS][subsubsubsubsection] %the section SSSS inherits the
> settings of subsubsubsubsection
>
> \definehead[Pawel][section=SSSS]
>
> Willi
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: XML command synonyms
2003-09-25 12:57 XML command synonyms Pawel Jackowski na Onet
2003-09-25 14:41 ` Willi Egger
@ 2003-09-25 19:13 ` Simon Pepping
2003-09-27 5:41 ` Pawel Jackowski na Onet
1 sibling, 1 reply; 10+ messages in thread
From: Simon Pepping @ 2003-09-25 19:13 UTC (permalink / raw)
On Thu, Sep 25, 2003 at 02:57:17PM +0200, Pawel Jackowski na Onet wrote:
> Hi all!
>
> Is there any way to define XML command synonyms? Assume that one defined
>
> \deifneXMLenvirnment[subsubsubsubsection] {.......} {.......}
>
> How to define 'SSSS' as a synonym of 'subsubsubsubsection' without wrtiting
> the same code twice?
From DocbookInContext:
%D A \type{\let} for XML environments
\def\letXMLenvironment#1#2%
{\letvaluevalue{\@@XMLelement:#1/}{\@@XMLelement:#2/}%
\letvaluevalue{\@@XMLelement:#1}{\@@XMLelement:#2}%
\letvaluevalue{\@@XMLelement:/#1}{\@@XMLelement:/#2}}%
Works for XMLenvironment.
Regards, Simon
--
Simon Pepping
email: spepping@scaprea.hobby.nl
home page: http://scaprea.hobby.nl
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: XML command synonyms
2003-09-25 19:13 ` Simon Pepping
@ 2003-09-27 5:41 ` Pawel Jackowski na Onet
2003-09-27 10:18 ` Hans Hagen
0 siblings, 1 reply; 10+ messages in thread
From: Pawel Jackowski na Onet @ 2003-09-27 5:41 UTC (permalink / raw)
From: "Simon Pepping" <spepping@scaprea.hobby.nl>
> >P: How to define 'SSSS' as a synonym of 'subsubsubsubsection' without
wrtiting
> >P: the same code twice?
>
> From DocbookInContext:
>
> %D A \type{\let} for XML environments
> \def\letXMLenvironment#1#2%
> {\letvaluevalue{\@@XMLelement:#1/}{\@@XMLelement:#2/}%
> \letvaluevalue{\@@XMLelement:#1}{\@@XMLelement:#2}%
> \letvaluevalue{\@@XMLelement:/#1}{\@@XMLelement:/#2}}%
>
> Works for XMLenvironment.
>
> Regards, Simon
Thanks a lot, but I'm afraid that doesn't work. TeX complains about
undefined control sequence:
ConTeXt ver: 2002.5.24 fmt: 2003.9.3 int: english mes: english
....
! Undefined control sequence.
\letXMLenvironment #1#2->\letvaluevalue
{\@@XMLelement:#1/}{\@@XMLelement:#2...
l.15 \letXMLenvironment{chapter}{X}
?
! Emergency stop.
\letXMLenvironment #1#2->\letvaluevalue
{\@@XMLelement:#1/}{\@@XMLelement:#2...
l.15 \letXMLenvironment{chapter}{X}
End of file on the terminal!
Is my ConTeXt to old?
Pawe/l
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: XML command synonyms
2003-09-27 5:41 ` Pawel Jackowski na Onet
@ 2003-09-27 10:18 ` Hans Hagen
2003-09-27 22:28 ` Pawel Jackowski na Onet
2003-09-29 18:30 ` Simon Pepping
0 siblings, 2 replies; 10+ messages in thread
From: Hans Hagen @ 2003-09-27 10:18 UTC (permalink / raw)
At 07:41 27/09/2003 +0200, you wrote:
>From: "Simon Pepping" <spepping@scaprea.hobby.nl>
>
> > >P: How to define 'SSSS' as a synonym of 'subsubsubsubsection' without
>wrtiting
> > >P: the same code twice?
> >
> > From DocbookInContext:
> >
> > %D A \type{\let} for XML environments
> > \def\letXMLenvironment#1#2%
> > {\letvaluevalue{\@@XMLelement:#1/}{\@@XMLelement:#2/}%
> > \letvaluevalue{\@@XMLelement:#1}{\@@XMLelement:#2}%
> > \letvaluevalue{\@@XMLelement:/#1}{\@@XMLelement:/#2}}%
\letcsnamecsname\csname\@@XMLelement:#1\endcsname\csname\@@XMLelement:#2\endcsname
etc, but before you enter that track, what exactly do you want?
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
information: http://www.pragma-ade.com/roadmap.pdf
documentation: http://www.pragma-ade.com/showcase.pdf
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: XML command synonyms
2003-09-27 10:18 ` Hans Hagen
@ 2003-09-27 22:28 ` Pawel Jackowski na Onet
2003-09-29 18:30 ` Simon Pepping
1 sibling, 0 replies; 10+ messages in thread
From: Pawel Jackowski na Onet @ 2003-09-27 22:28 UTC (permalink / raw)
Hello!
From: "Hans Hagen" <pragma@wxs.nl>
>
\letcsnamecsname\csname\@@XMLelement:#1\endcsname\csname\@@XMLelement:#2\end
csname
>
> etc, but before you enter that track, what exactly do you want?
In example; assume that 'subsubsubsubsection' is already defined part of a
document
\defineXMLenvironment
[subsubsubsubsection]
{\subsubsubsubsection}
{\relax}
Now I would like to define some abbreviations like 'SSSS' (or 'ssss' or even
'S4') in the way that
<SSSS> ... </SSSS>
will work as well as
<subsubsubsubsection> ... </subsubsubsubsection>
Of course I can rewrie environment definitions for each needed abbreviation,
but it doesn't seems to be clever way...
Another simple example;
defineXMLargument
[center]
{\midaligned}
How defne 'mid' tag as a synonym of 'center' without rewriting
defineXMLargument
[mid]
{\midaligned}
So the <bf>question</bf> is how to define <b>synonyms</b> for XML elements,
singular commands, entities...
Regards, Pawe/l
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: XML command synonyms
2003-09-27 10:18 ` Hans Hagen
2003-09-27 22:28 ` Pawel Jackowski na Onet
@ 2003-09-29 18:30 ` Simon Pepping
2003-09-30 8:04 ` Hans Hagen
1 sibling, 1 reply; 10+ messages in thread
From: Simon Pepping @ 2003-09-29 18:30 UTC (permalink / raw)
On Sat, Sep 27, 2003 at 12:18:21PM +0200, Hans Hagen wrote:
> At 07:41 27/09/2003 +0200, you wrote:
>
> >From: "Simon Pepping" <spepping@scaprea.hobby.nl>
> >
> >> >P: How to define 'SSSS' as a synonym of 'subsubsubsubsection' without
> >wrtiting
> >> >P: the same code twice?
> >>
> >> From DocbookInContext:
> >>
> >> %D A \type{\let} for XML environments
> >> \def\letXMLenvironment#1#2%
> >> {\letvaluevalue{\@@XMLelement:#1/}{\@@XMLelement:#2/}%
> >> \letvaluevalue{\@@XMLelement:#1}{\@@XMLelement:#2}%
> >> \letvaluevalue{\@@XMLelement:/#1}{\@@XMLelement:/#2}}%
>
>
> \letcsnamecsname\csname\@@XMLelement:#1\endcsname\csname\@@XMLelement:#2\endcsname
>
> etc, but before you enter that track, what exactly do you want?
I use it in the same way as let, but for XML environments. For
example,
store the current value
\letXMLenvironment{origindexterm}{indexterm}%
redefine XML environment indexterm,
do some work,
restore the old value
\letXMLenvironment{indexterm}{origindexterm}}
Regards, Simon
--
Simon Pepping
email: spepping@scaprea.hobby.nl
home page: http://scaprea.hobby.nl
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: XML command synonyms
2003-09-29 18:30 ` Simon Pepping
@ 2003-09-30 8:04 ` Hans Hagen
2003-09-30 19:06 ` pushmacro Simon Pepping
0 siblings, 1 reply; 10+ messages in thread
From: Hans Hagen @ 2003-09-30 8:04 UTC (permalink / raw)
At 20:30 29/09/2003 +0200, you wrote:
>On Sat, Sep 27, 2003 at 12:18:21PM +0200, Hans Hagen wrote:
> > At 07:41 27/09/2003 +0200, you wrote:
> >
> > >From: "Simon Pepping" <spepping@scaprea.hobby.nl>
> > >
> > >> >P: How to define 'SSSS' as a synonym of 'subsubsubsubsection' without
> > >wrtiting
> > >> >P: the same code twice?
> > >>
> > >> From DocbookInContext:
> > >>
> > >> %D A \type{\let} for XML environments
> > >> \def\letXMLenvironment#1#2%
> > >> {\letvaluevalue{\@@XMLelement:#1/}{\@@XMLelement:#2/}%
> > >> \letvaluevalue{\@@XMLelement:#1}{\@@XMLelement:#2}%
> > >> \letvaluevalue{\@@XMLelement:/#1}{\@@XMLelement:/#2}}%
> >
> >
> >
> \letcsnamecsname\csname\@@XMLelement:#1\endcsname\csname\@@XMLelement:#2\endcsname
> >
> > etc, but before you enter that track, what exactly do you want?
>
>I use it in the same way as let, but for XML environments. For
>example,
>
>store the current value
>\letXMLenvironment{origindexterm}{indexterm}%
>redefine XML environment indexterm,
>do some work,
>restore the old value
>\letXMLenvironment{indexterm}{origindexterm}}
in that case:
\expandafter\pushmacro\csname...\endcsname
\expandafter\popmacro\csname ...\endcsname
is nicer since it works nested as well
wo maybe we should have: \pushXMLmeaning \popXMLmeaning
\def\pushXMLmeaning#1%
{\@EA\pushmacro\csname\@@XMLelement:#1/\endcsname
\@EA\pushmacro\csname\@@XMLelement:#1\endcsname
\@EA\pushmacro\csname\@@XMLelement:/#1\endcsname}
\def\popXMLmeaning#1%
{\@EA\popmacro\csname\@@XMLelement:#1/\endcsname
\@EA\popmacro\csname\@@XMLelement:#1\endcsname
\@EA\popmacro\csname\@@XMLelement:/#1\endcsname}
Does that suit your needs?
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
information: http://www.pragma-ade.com/roadmap.pdf
documentation: http://www.pragma-ade.com/showcase.pdf
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: pushmacro
2003-09-30 8:04 ` Hans Hagen
@ 2003-09-30 19:06 ` Simon Pepping
0 siblings, 0 replies; 10+ messages in thread
From: Simon Pepping @ 2003-09-30 19:06 UTC (permalink / raw)
On Tue, Sep 30, 2003 at 10:04:11AM +0200, Hans Hagen wrote:
> At 20:30 29/09/2003 +0200, you wrote:
> >I use it in the same way as let, but for XML environments. For
> >example,
> >
> >store the current value
> >\letXMLenvironment{origindexterm}{indexterm}%
> >redefine XML environment indexterm,
> >do some work,
> >restore the old value
> >\letXMLenvironment{indexterm}{origindexterm}}
>
> in that case:
>
> \expandafter\pushmacro\csname...\endcsname
> \expandafter\popmacro\csname ...\endcsname
>
> is nicer since it works nested as well
>
> wo maybe we should have: \pushXMLmeaning \popXMLmeaning
>
> \def\pushXMLmeaning#1%
> {\@EA\pushmacro\csname\@@XMLelement:#1/\endcsname
> \@EA\pushmacro\csname\@@XMLelement:#1\endcsname
> \@EA\pushmacro\csname\@@XMLelement:/#1\endcsname}
>
> \def\popXMLmeaning#1%
> {\@EA\popmacro\csname\@@XMLelement:#1/\endcsname
> \@EA\popmacro\csname\@@XMLelement:#1\endcsname
> \@EA\popmacro\csname\@@XMLelement:/#1\endcsname}
>
> Does that suit your needs?
I have never used \pushmacro, but if I see it right, it pushes the
macro on a stack for later restore. That would suit the example I have
given. But it would not always satisfy me. For example, when I want to
use a predefined value as the new value:
store the current value
\pushXMLmeaning{indexterm}%
redefine XML environment indexterm,
e.g. as \letXMLenvironment{indexterm}{specialindexterm}
do some work,
restore the old value
\popXMLmeaning{indexterm}
Regards, Simon
--
Simon Pepping
email: spepping@scaprea.hobby.nl
home page: http://scaprea.hobby.nl
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2003-09-30 19:06 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-25 12:57 XML command synonyms Pawel Jackowski na Onet
2003-09-25 14:41 ` Willi Egger
2003-09-25 15:18 ` Willi Egger
2003-09-25 19:13 ` Simon Pepping
2003-09-27 5:41 ` Pawel Jackowski na Onet
2003-09-27 10:18 ` Hans Hagen
2003-09-27 22:28 ` Pawel Jackowski na Onet
2003-09-29 18:30 ` Simon Pepping
2003-09-30 8:04 ` Hans Hagen
2003-09-30 19:06 ` pushmacro Simon Pepping
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).