* No bonds visibel with ppchtex
2004-12-18 22:42 ` h h extern
@ 2004-12-19 20:23 ` Kai Straube
2004-12-31 21:22 ` Hans Hagen
0 siblings, 1 reply; 15+ messages in thread
From: Kai Straube @ 2004-12-19 20:23 UTC (permalink / raw)
[-- Attachment #1: Type: text/plain, Size: 538 bytes --]
Am Samstag, 18. Dezember 2004 23:42 schrobst Du:
> >>can you try
> >>
> >> texexec --pdf --automp yourfile
> >>
> >>it may be that your context is configured for runtime mp processing while
> >>your tex does not have write18 enabled
> >
> > Thank you for your answer,
> >
> > but this results in no other output ;-(
>
> strange, check your cont-sys.tex file if metafun is run at runtime
> (write18) and if so, make sure that in texmf.cnf write18 is enabled as well
Hi,
here are this files. I dont no if they are correct so ;-(
Kai
[-- Attachment #2: cont-sys.tex --]
[-- Type: text/x-tex, Size: 2978 bytes --]
%D \module
%D [ file=cont-sys,
%D version=1995.10.10,
%D title=\CONTEXT\ Miscellaneous Macros,
%D subtitle=System Specific Setups,
%D author=Hans Hagen,
%D date=\currentdate,
%D copyright={PRAGMA / Hans Hagen \& Ton Otten}]
%C
%C This module is part of the \CONTEXT\ macro||package and is
%C therefore copyrighted by \PRAGMA. See mreadme.pdf for
%C details.
\unprotect
% Here you can take care of overloading some (style)
% defaults. What goes here, depends on your local system.
%
% The following commands sets the default font encoding:
%
% \setupencoding [\s!default=ec]
%
% You can let \CONTEXT\ load the map files for \PDFTEX.
%
% \autoloadmapfilestrue
%
% If you use the more verbose naming scheme, uncomment this:
%
% \usetypescript [map] [default,\defaultencoding]
%
% or :
%
% \usetypescript [map] [all]
%
% In case you have set psfonts.map already, you can comment
% the following lines. Beware: pdftex uses the fontname
% (second entry on map file lines) for (not so) clever
% remapping, so in case of troubles, remove the names (is
% safe)!
%
% \preloadmapfile [original-ams-cmr]
% \preloadmapfile [original-ams-euler]
% \preloadmapfile [il2-ams-cmr]
% \preloadmapfile [pl0-ams-cmr]
%
% If you want the default berry names (ec and 8r only):
%
% \usetypescript [berry] [\defaultencoding]
%
% Overload Lucida by Times cum suis:
%
% \definetypescriptsynonym [lbr] [pos]
%
% Compensate for missing files:
%
% \definefontsynonym [gbhei] [gbsong]
% \definefontsynonym [gbheisl] [gbsong]
% \definefontsynonym [gbheisl] [gbsong]
%
% The already loaded map file list can be reset with:
%
% \forgetmapfiles
%
% Setting up a global figure path:
%
% \setupexternalfigures [\c!gebied={e:/fig/eps,t:/mine/figs}]
%
% Loading a specific special driver:
%
% \setupoutput [dviwindo]
% Changing language defaults:
%
% \setuplanguage
% [nl]
% [\c!leftquote=\upperleftsinglesixquote,
% \c!leftquotation=\upperleftdoublesixquote]
% Loading local preferences, for example
%
% \input prag-gen % company styles
% \input prag-log % more company styles
%
% Enabling run time \METAPOST\ (also enable \write18 in
% texmf.cnf):
\runMPgraphicstrue
\runMPTEXgraphicstrue
% This saves some runtime, but needs a format, which you can
% make with 'texexec --make --alone metafun'. Make sure that
% the mem files are moved to the used web2c path (locate with
% 'kpsewhich plain.mem').
\useMETAFUNformattrue
% Enabling nested pretty printing:
\newprettytrue
% This can be a way to get things working on system with
% name clashes. (Some \TeX's tend do search system wide.)
\protectbufferstrue
% You can enable a more extensive figure searching, but
% normally this is not really needed and even annoying.
%
% \runutilityfiletrue
% You can also load additional encodings here:
% \useregime[cyr]
% \useencoding[cyr]
% \enableregime[cp1251]
% \setupbodyfont[cyr]
% So far.
\protect \endinput
[-- Attachment #3: texmf.cnf --]
[-- Type: text/plain, Size: 21252 bytes --]
% original texmf.cnf -- runtime path configuration file for kpathsea.
% (If you change or delete `original' on the previous line, the
% distribution won't install its version over yours.)
% Public domain.
%
% What follows is a super-summary of what this .cnf file can
% contain. Please read the Kpathsea manual for more information.
%
% texmf.cnf is generated from texmf.in, by replacing @var@ with the
% value of the Make variable `var', via a sed file texmf.sed, generated
% (once) by kpathsea/Makefile (itself generated from kpathsea/Makefile.in
% by configure).
%
% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
% The `=' (and surrounding spaces) is optional.
% No % or @ in texmf.in, for the sake of autogeneration.
% (However, %'s and @'s can be edited into texmf.cnf or put in envvar values.)
% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
%
% Earlier entries (in the same or another file) override later ones, and
% an environment variable foo overrides any texmf.cnf definition of foo.
%
% All definitions are read before anything is expanded, so you can use
% variables before they are defined.
%
% If a variable assignment is qualified with `.PROGRAM', it is ignored
% unless the current executable (last filename component of argv[0]) is
% named PROGRAM. This foo.PROGRAM construct is not recognized on the
% right-hand side. For environment variables, use FOO_PROGRAM.
%
% Which file formats use which paths for searches is described in the
% various programs' and the kpathsea documentation.
%
% // means to search subdirectories (recursively).
% A leading !! means to look only in the ls-R db, never on the disk.
% A leading/trailing/doubled ; in the paths will be expanded into the
% compile-time default. Probably not what you want.
%
% You can use brace notation, for example: /usr/local/{mytex:othertex}
% expands to /usr/local/mytex:/usr/local/othertex. Instead of the path
% separator you can use a comma: /usr/local/{mytex,othertex} also expands
% to /usr/local/mytex:/usr/local/othertex. However, the use of the comma
% instead of the path separator is deprecated.
%
% The text above assumes thet path separator is a colon (:). Non-UNIX
% systems use different path separators, like the semicolon (;).
% \f Part 1: Search paths and directories.
% You can set an environment variable to override TEXMF if you're testing
% a new TeX tree, without changing anything else.
%
% You may wish to use one of the $SELFAUTO... variables here so TeX will
% find where to look dynamically. See the manual and the definition
% below of TEXMFCNF.
% The main tree, which must be mentioned in $TEXMF, below:
TEXMFMAIN = /usr/share/texmf
% A place for local additions to a "standard" texmf tree. For example:
TEXMFLOCAL = /usr/local/share/texmf
% If defined, teTeX's texconfig stores modifications here (instead of the
% TEXMFMAIN tree).
VARTEXMF = /var/lib/texmf
% User texmf trees can be catered for like this...
HOMETEXMF = $HOME/texmf
% Now, list all the texmf trees. If you have multiple trees you can
% use shell brace notation, like this:
% TEXMF = {$HOMETEXMF,!!$TEXMFLOCAL,!!$TEXMFMAIN}
% The braces are necessary. If you set VARTEXMF, you also have to
% - list $VARTEXMF in the TEXMF definition;
% - make sure that $VARTEXMF precedes $TEXMFMAIN in the TEXMF definition.
% TEXMF = $TEXMFMAIN
TEXMF = {$HOMETEXMF,!!${TEXMFLOCAL},!!$VARTEXMF,!!$TEXMFMAIN}
% The system trees. These are the trees that are shared by all the users.
SYSTEXMF = ${TEXMFLOCAL};$VARTEXMF;$TEXMFMAIN
% Where generated fonts may be written. This tree is used when the sources
% were found in a system tree and either that tree wasn't writable, or the
% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
VARTEXFONTS = /var/cache/fonts
% Where to look for ls-R files. There need not be an ls-R in the
% directories in this path, but if there is one, Kpathsea will use it.
%
% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
% one of the TEXMF directories (avoids overlapping ls-R files).
TEXMFDBS = $HOMETEXMF;${TEXMFLOCAL};$VARTEXMF;$TEXMFMAIN;$OLDTEXMF;$VARTEXFONTS
% It may be convenient to define TEXMF like this:
% TEXMF = {$HOMETEXMF,!!$TEXMFLOCAL,!!$TEXMFMAIN,$HOME}
% which allows users to set up entire texmf trees, and tells TeX to
% look in places like ~/tex and ~/bibtex. If you do this, define TEXMFDBS
% like this:
% TEXMFDBS = $HOMETEXMF;$TEXMFLOCAL;$TEXMFMAIN;$VARTEXFONTS
% or mktexlsr will generate an ls-R file for $HOME when called, which is
% rarely desirable. If you do this you'll want to define SYSTEXMF like
% this:
% SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN
% so that fonts from a user's tree won't escape into the global trees.
%
% On some systems, there will be a system tree which contains all the font
% files that may be created as well as the formats. For example
% VARTEXMF = /var/lib/texmf
% is used on many Linux systems. In this case, set VARTEXFONTS like this
% VARTEXFONTS = $VARTEXMF/fonts
% and do not mention it in TEXMFDBS (but _do_ mention VARTEXMF).
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Usually you will not need to edit any of the other variables in part 1. %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% WEB2C is for Web2C specific files. The current directory may not be
% a good place to look for them.
WEB2C = $HOMETEXMF/web2c;$VARTEXMF/web2c;$TEXMF/web2c
% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
% or \openin, including .sty, .eps, etc.
% Plain TeX. Have the command tex check all directories as a last
% resort, we may have plain-compatible stuff anywhere.
TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//
% Other plain-based formats.
TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}//
TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}//
TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}//
TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}//
TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,plain,generic,}//
% pTeX.
ptex_inputs = .;$TEXMF/{ptex,tex}/{plain,generic,}//
platex209_inputs = .;$TEXMF/{ptex,tex}/{platex209,plain,platex,}//
platex2e_inputs = .;$TEXMF/{ptex,tex}/{platex,latex,generic,}//
TEXINPUTS.platex209 = $platex209_inputs
TEXINPUTS.platex = $platex2e_inputs
TEXINPUTS.ptex = $ptex_inputs
TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}//
TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
% LaTeX 2e specific macros are stored in latex/, macros that can only be
% used with 2.09 in latex209/. In addition, we look in the directory
% latex209, useful for macros that were written for 2.09 and do not
% mention 2e at all, but can be used with 2e.
TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}//
TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}//
% Fontinst needs to read afm files.
TEXINPUTS.fontinst = .;$TEXMF/tex//;$TEXMF/fonts/afm//
% MLTeX.
TEXINPUTS.frlatex = .;$TEXMF/{mltex,tex}/{french,latex,generic,}//
TEXINPUTS.frtex = .;$TEXMF/{mltex,tex}/{french,plain,generic,}//
TEXINPUTS.mllatex = .;$TEXMF/{mltex,tex}/{latex,generic,}//
TEXINPUTS.mltex = .;$TEXMF/{mltex,tex}/{plain,generic,}//
% e-TeX. This form of the input paths is borrowed from teTeX. A certain
% variant of TDS is assumed here, unaffected by the build variables.
TEXINPUTS.elatex = .;$TEXMF/{etex,tex}/{latex,generic,}//
TEXINPUTS.etex = .;$TEXMF/{etex,tex}/{plain,generic,}//
% pdfTeX. This form of the input paths is borrowed from teTeX. A certain
% variant of TDS is assumed here, unaffected by the build variables.
TEXINPUTS.pdfcslatex = .;$TEXMF/{pdftex,tex}/{cslatex,csplain,latex,generic,}//
TEXINPUTS.pdfcsplain = .;$TEXMF/{pdftex,tex}/{csplain,plain,generic,}//
TEXINPUTS.pdfjadetex = .;$TEXMF/{pdftex,tex}/{jadetex,plain,generic,}//
TEXINPUTS.pdflatex = .;$TEXMF/{pdftex,tex}/{latex,generic,}//
TEXINPUTS.pdfmex = .;$TEXMF/{pdftex,tex}/{mex,plain,generic,}//
TEXINPUTS.pdftex = .;$TEXMF/{pdftex,tex}/{plain,generic,}//
TEXINPUTS.pdftexinfo = .;$TEXMF/{pdftex,tex}/{texinfo,plain,generic,}//
TEXINPUTS.pdfamstex = .;$TEXMF/{pdftex,tex}/{amstex,plain,generic,}//
% pdfeTeX.
TEXINPUTS.pdfelatex = .;$TEXMF/{pdfetex,pdftex,etex,tex}/{latex,generic,}//
TEXINPUTS.pdfetex = .;$TEXMF/{pdfetex,pdftex,etex,tex}/{plain,generic,}//
% Omega.
TEXINPUTS.lambda = .;$TEXMF/{omega,tex}/{lambda,latex,generic,}//
TEXINPUTS.omega = .;$TEXMF/{omega,tex}/{plain,generic,}//
% Context macros by Hans Hagen:
TEXINPUTS.context = .;$TEXMF/{pdftex,etex,tex}/{context,plain,generic,}//
% odd formats needing their own paths
TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}//
TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}//
TEXINPUTS.mex-pl = .;$TEXMF/tex/{mex,plain,generic,}//
TEXINPUTS.platex-pl = .;$TEXMF/tex/{platex,latex,generic,}//
TEXINPUTS.pdfplatex = .;$TEXMF/{pdftex,tex}/{platex,latex,generic,}//
TEXINPUTS.pdfmex-pl = .;$TEXMF/{pdftex,tex}/{mex,plain,generic,}//
TEXINPUTS.pdfemex = .;$TEXMF/{pdfetex,pdftex,etex,tex}/{mex,plain,generic,}//
TEXINPUTS.pdfemex-pl = .;$TEXMF/{pdfetex,pdftex,etex,tex}/{mex,plain,generic,}//
% For xmltex and pdfxmltex
TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
TEXINPUTS.pdfxmltex = .;$TEXMF/{pdftex,tex}/{xmltex,latex,generic,}//
% Earlier entries override later ones, so put this last.
TEXINPUTS = .;$TEXMF/tex/{generic,}//
% Metafont, MetaPost inputs.
MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
MPINPUTS = .;$TEXMF/metapost//
% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read (see web2c/INSTALL),
% and string pools (.pool) for ini{tex,mf,mp}. It is silly that we have six
% paths and directories here (they all resolve to a single place by default),
% but historically ...
TEXFORMATS = .;$WEB2C
MFBASES = .;$WEB2C
MPMEMS = .;$WEB2C
TEXPOOL = .;$WEB2C
MFPOOL = .;$WEB2C
MPPOOL = .;$WEB2C
% Device-independent font metric files.
VFFONTS = .;$TEXMF/fonts/vf//
TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
% The $MAKETEX_MODE below means the drivers will not use a cx font when
% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init
% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual.
% The modeless part guarantees that bitmaps for PostScript fonts are found.
PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
% Similarly for the GF format, which only remains in existence because
% Metafont outputs it (and MF isn't going to change).
GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
% A backup for PKFONTS and GFFONTS. Not used for anything.
GLYPHFONTS = .;$TEXMF/fonts
% A place to puth everything that doesn't fit the other font categories.
MISCFONTS = .;$TEXMF/fonts/misc//;$TEXMF/fonts/hbf//
% For texfonts.map and included map files used by mktexpk.
% See ftp://ftp.tug.org/tex/fontname.tar.gz.
TEXFONTMAPS = .;$TEXMF/fontname
% support non"k"-xdvi:
PKFONTS.XDvi = .:$TEXMF/%s:$VARTEXFONTS/pk/{%m,modeless}//
VFFONTS.XDvi = .:$TEXMF/%s
PSHEADERS.XDvi = .:$TEXMF/%q{dvips,fonts/type1}//
TEXPICTS.XDvi = .:$TEXMF/%q{dvips,tex}//
% BibTeX bibliographies and style files.
BIBINPUTS.jbibtex = .;$TEXMF/{jbibtex,bibtex}/bib//
BSTINPUTS.jbibtex = .;$TEXMF/{jbibtex,bibtex}/bst//
BIBINPUTS = .;$TEXMF/bibtex/{bib,}//
BSTINPUTS = .;$TEXMF/bibtex/{bst,}//
% MFT style files.
MFTINPUTS = .;$TEXMF/mft//
% PostScript headers, prologues (.pro), encodings (.enc) and fonts.
% for pdvips which is a patched dvips to use with the Japanese pTeX:
TEXPSHEADERS.pdvips = .;$TEXMF/{pdvips,pdftex,tex,fonts/type1}//
% for the regular dvips:
TEXPSHEADERS = .;$TEXMF/{dvips,pdftex,tex,fonts/type1}//
TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,pdftex,tex,fonts/{type1,truetype}}//
% PostScript Type 1 outline fonts.
T1FONTS = .;$TEXMF/fonts/type1//
% PostScript AFM metric files.
AFMFONTS = .;$TEXMF/fonts/afm//
% TrueType outline fonts.
TTFONTS = .;$TEXMF/fonts/truetype//
% Type 42 outline fonts.
T42FONTS = .;$TEXMF/fonts/type42//
% Dvips' config.* files (this name should not start with `TEX'!).
TEXCONFIG = $TEXMF/dvips//
% Makeindex style (.ist) files.
INDEXSTYLE = .;$TEXMF/makeindex//
% Used by DMP (ditroff-to-mpx), called by makempx -troff.
TRFONTS = /usr/lib/font/devpost
MPSUPPORT = .;$TEXMF/metapost/support
% For xdvi to find mime.types and .mailcap, if they do not exist in
% $HOME. These are single directories, not paths.
% (But the default mime.types, at least, may well suffice.)
MIMELIBDIR = /etc
MAILCAPLIBDIR = /etc
% TeX documentation and source files, for use with kpsewhich.
TEXDOCS = .;$TEXMF/doc//
TEXSOURCES = .;$TEXMF/source//
TEXDOCSSUFFIX = .dvi;.ps;.html;.txt
TEXDOCSCOMPRESS = ;.gz;.bz2;.zip;.Z
TEXDOCEXT = {$TEXDOCSSUFFIX}{$TEXDOCSCOMPRESS}
% Web and CWeb input paths.
WEBINPUTS = .;$TEXMF/web//
CWEBINPUTS = .;$TEXMF/cweb//
% Omega-related fonts and other files. The odd construction for OFMFONTS
% makes it behave in the face of a definition of TFMFONTS. Unfortunately
% no default substitution would take place for TFMFONTS, so an explicit
% path is retained.
OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//;$TFMFONTS
OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovf//
OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
OTPINPUTS = .;$TEXMF/omega/otp//
OCPINPUTS = .;$TEXMF/omega/ocp//
% Some additional input variables for several programs. If you add
% a program that uses the 'other text files' or 'other binary files'
% search formats, you'll want to add their variables here as well.
T4HTINPUTS = .;$TEXMF/tex4ht//
% xdvik and dvipdfm can share some files with dvips
XDVIINPUTS = .;$TEXMF/{xdvi,dvips}//
DVIPDFMINPUTS = .;$TEXMF/{dvipdfm,dvips}//
%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
% KPSE_DOT = .
% This definition isn't used from this .cnf file itself (that would be
% paradoxical), but the compile-time default in paths.h is built from it.
% The SELFAUTO* variables are set automatically from the location of
% argv[0], in kpse_set_progname.
%
% The TETEXDIR stuff isn't likely to relevant unless you're using teTeX,
% but it doesn't hurt.
%
% For security reasons, it is better not to have . part of the path.
%
TEXMFCNF = /etc/texmf:$VARTEXMF/web2c:/usr/share/texmf/web2c:/.$TETEXDIR
% \f Part 2: Non-path options.
% Write .log/.dvi/etc. files here, if the current directory is unwritable.
% TEXMFOUTPUT = /tmp
% If a dynamic file creation fails, log the command to this file, in
% either the current directory or TEXMFOUTPUT. Set to the
% empty string or 0 to avoid logging.
MISSFONT_LOG = missfont.log
% Set to a colon-separated list of words specifying warnings to suppress.
% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
% TEX_HUSH = checksum:lostchar:readable:special
% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
TEX_HUSH = none
% Enable system commands via \write18{...}?
shell_escape = f
% Allow TeX \openin, \openout, or \input on filenames starting with `.'
% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
% a (any) : any file can be opened.
% r (restricted) : disallow opening "dotfiles".
% p (paranoid) : as 'r' and disallow going to parent directories, and
% restrict absolute paths to be under $TEXMFOUTPUT.
openout_any = p
openin_any = a
% Allow TeX, MF, and MP to parse the first line of an input file for
% the %&format construct.
parse_first_line = f
% Enable the mktex... scripts by default? These must be set to 0 or 1.
% Particular programs can and do override these settings, for example
% dvips's -M option. Your first chance to specify whether the scripts
% are invoked by default is at configure time.
%
% These values are ignored if the script names are changed; e.g., if you
% set DVIPSMAKEPK to `foo', what counts is the value of the environment
% variable/config value `FOO', not the `MKTEXPK' value.
%
% MKTEXTEX = 0
% MKTEXPK = 0
% MKTEXMF = 0
% MKTEXTFM = 0
% MKTEXFMT = 0
% MKOCP = 0
% MKOFM = 0
% What MetaPost runs to make MPX files. This is passed an option -troff
% if MP is in troff mode. Set to `0' to disable this feature.
MPXCOMMAND = makempx
% \f Part 3: Array and other sizes for TeX (and Metafont and MetaPost).
%
% If you want to change some of these sizes only for a certain TeX
% variant, the usual dot notation works, e.g.,
% main_memory.hugetex = 20000000
%
% If a change here appears to be ignored, try redumping the format file.
% Memory. Must be less than 8,000,000 total.
%
% main_memory is relevant only to initex, extra_mem_* only to non-ini.
% Thus, have to redump the .fmt file after changing main_memory; to add
% to existing fmt files, increase extra_mem_*. (To get an idea of how
% much, try \tracingstats=2 in your TeX source file;
% web2c/tests/memtest.tex might also be interesting.)
%
% To increase space for boxes (as might be needed by, e.g., PiCTeX),
% increase extra_mem_bot.
%
% For some xy-pic samples, you may need as much as 700000 words of memory.
% For the vast majority of documents, 60000 or less will do.
%
main_memory = 1000000 % words of inimemory available; also applies to inimf&mp
extra_mem_top = 0 % extra high memory for chars, tokens, etc.
extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
% ConTeXt is a memory hog...
extra_mem_top.context = 2000000
extra_mem_bot.context = 4000000
main_memory.context = 1500000
main_memory.mpost = 1500000
% Words of font info for TeX (total size of all TFM files, approximately).
font_mem_size = 500000
% Total number of fonts. Must be >= 50 and <= 2000 (without tex.ch changes).
font_max = 1000
% Extra space for the hash table of control sequences (which allows 10K
% names as distributed).
hash_extra = 50000
% Max number of characters in all strings, including all error messages,
% help texts, font names, control sequences. These values apply to TeX and MP.
pool_size = 1250000
% Minimum pool space after TeX/MP's own strings; must be at least
% 25000 less than pool_size, but doesn't need to be nearly that large.
string_vacancies = 90000
% Maximum number of strings.
max_strings = 100000
% min pool space left after loading .fmt
pool_free = 47500
% Hyphenation trie. As distributed, the maximum is 65535; this should
% work unless `unsigned short' is not supported or is smaller than 16
% bits. This value should suffice for UK English, US English, French,
% and German (for example). To increase, you must change
% `ssup_trie_opcode' and `ssup_trie_size' in tex.ch (and rebuild TeX);
% the trie will then consume four bytes per entry, instead of two.
%
% US English, German, and Portuguese: 30000.
% German: 14000.
% US English: 10000.
%
trie_size = 262000
% Buffer size. TeX uses the buffer to contain input lines, but macro
% expansion works by writing material into the buffer and reparsing the
% line. As a consequence, certain constructs require the buffer to be
% very large. As distributed, the size is 50000; most documents can be
% handled within a tenth of this size.
buf_size = 200000
hyph_size = 1000 % number of hyphenation exceptions, >610 and <32767.
nest_size = 500 % simultaneous semantic levels (e.g., groups)
max_in_open = 15 % simultaneous input files and error insertions
param_size = 5000 % simultaneous macro parameters
save_size = 5000 % for saving values outside current group
stack_size = 1500 % simultaneous input sources
% These are Omega-specific.
ocp_buf_size = 20000 % character buffers for ocp filters.
ocp_stack_size = 10000 % stacks for ocp computations.
ocp_list_size = 1000 % control for multiple ocps.
% Parameter specific to MetaPost.
% Maximum number of knots between breakpoints of a path.
% Set to 2000 by default.
% path_size.mpost = 10000
% These are pdftex-specific.
obj_tab_size = 300000 % PDF objects
dest_names_size = 300000 % destinations
% These work best if they are the same as the I/O buffer size, but it
% doesn't matter much. Must be a multiple of 8.
dvi_buf_size = 16384 % TeX
gf_buf_size = 16384 % MF
% It's probably inadvisable to change these. At any rate, we must have:
% 45 < error_line < 255;
% 30 < half_error_line < error_line - 15;
% 60 <= max_print_line;
% These apply to Metafont and MetaPost as well.
error_line = 79
half_error_line = 50
max_print_line = 79
% These are xmltex specific
main_memory.xmltex = 1500000
param_size.xmltex = 1500
stack_size.xmltex = 1500
hash_extra.xmltex = 50000
string_vacancies.xmltex = 45000
pool_free.xmltex = 47500
nest_size.xmltex = 500
save_size.xmltex = 10000
pool_size.xmltex = 500000
max_strings.xmltex = 55000
% These are pdfxmltex specific
main_memory.pdfxmltex = 2500000
param_size.pdfxmltex = 1500
stack_size.pdfxmltex = 1500
hash_extra.pdfxmltex = 50000
string_vacancies.pdfxmltex = 45000
pool_free.pdfxmltex = 47500
nest_size.pdfxmltex = 500
save_size.pdfxmltex = 10000
pool_size.pdfxmltex = 500000
max_strings.pdfxmltex = 55000
% These are jadetex specific
main_memory.jadetex = 499999
hash_extra.jadetex = 25000
pool_size.jadetex = 500000
save_size.jadetex = 15000
[-- Attachment #4: Type: text/plain, Size: 139 bytes --]
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 15+ messages in thread