* creating environments @ 2007-01-29 12:21 Wolfgang Schuster 2007-01-29 15:15 ` Aditya Mahajan 0 siblings, 1 reply; 8+ messages in thread From: Wolfgang Schuster @ 2007-01-29 12:21 UTC (permalink / raw) To: ntg-context Hi all, I have a module with a envrionment defined in the following way: \def\startFOO#1\stopFOO{...#1...} I try currently to write a command \defineFOO[MYFOO] that expands to my already created environment. \startMYFOO#1\stopMYFOO -> \startFOO#1\stopFOO I know it is possible to make this in the following way: \def\startMYFOO#1\stopMYFOO{\startFOO#1\stopFOO} but this not what I want. Wolfgang ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: creating environments 2007-01-29 12:21 creating environments Wolfgang Schuster @ 2007-01-29 15:15 ` Aditya Mahajan 2007-01-30 13:01 ` Wolfgang Schuster 0 siblings, 1 reply; 8+ messages in thread From: Aditya Mahajan @ 2007-01-29 15:15 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, 29 Jan 2007, Wolfgang Schuster wrote: > Hi all, > > > I have a module with a envrionment defined in the following way: > > \def\startFOO#1\stopFOO{...#1...} > > > I try currently to write a command \defineFOO[MYFOO] that expands to my > already created environment. > > \startMYFOO#1\stopMYFOO -> \startFOO#1\stopFOO > > > I know it is possible to make this in the following way: > > \def\startMYFOO#1\stopMYFOO{\startFOO#1\stopFOO} > > but this not what I want. Something like this \def\defineFOO[#1]% {\setvalue{\c!start#1}{\startFOO} \setvalue{\c!stop#1} {\stopFOO}} Aditya ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: creating environments 2007-01-29 15:15 ` Aditya Mahajan @ 2007-01-30 13:01 ` Wolfgang Schuster 2007-01-30 15:05 ` Aditya Mahajan 0 siblings, 1 reply; 8+ messages in thread From: Wolfgang Schuster @ 2007-01-30 13:01 UTC (permalink / raw) To: ntg-context On Mon, 29 Jan 2007 10:15:34 -0500 (EST) Aditya Mahajan <adityam@umich.edu> wrote: > On Mon, 29 Jan 2007, Wolfgang Schuster wrote: > > > Hi all, > > > > > > I have a module with a envrionment defined in the following way: > > > > \def\startFOO#1\stopFOO{...#1...} > > > > > > I try currently to write a command \defineFOO[MYFOO] that expands to my > > already created environment. > > > > \startMYFOO#1\stopMYFOO -> \startFOO#1\stopFOO > > > > > > I know it is possible to make this in the following way: > > > > \def\startMYFOO#1\stopMYFOO{\startFOO#1\stopFOO} > > > > but this not what I want. > > Something like this > > \def\defineFOO[#1]% > {\setvalue{\c!start#1}{\startFOO} > \setvalue{\c!stop#1} {\stopFOO}} > Hi Aditya, this can only be used if you define your environment in this way: \def\startFOO{...} \def\stopFoo{...} I defined my environment in this way: \def\startFOO#1\stopFOO{...} This means TeX reads everything from \startFOO till \stopFOO and looks afterwards at the replacement text. I used tried the first way with saving the content into a buffer and using the buffer content. This did no longer work when you try to write: \placefloat {\startFOO ... \stopFOO} or \starcombination[...] {\startFOO ... \stopFOO} {} ... \stopcombination Wolfgang ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: creating environments 2007-01-30 13:01 ` Wolfgang Schuster @ 2007-01-30 15:05 ` Aditya Mahajan 2007-01-31 10:15 ` Wolfgang Schuster 0 siblings, 1 reply; 8+ messages in thread From: Aditya Mahajan @ 2007-01-30 15:05 UTC (permalink / raw) To: mailing list for ConTeXt users On Tue, 30 Jan 2007, Wolfgang Schuster wrote: > On Mon, 29 Jan 2007 10:15:34 -0500 (EST) > Aditya Mahajan <adityam@umich.edu> wrote: > >> On Mon, 29 Jan 2007, Wolfgang Schuster wrote: >> >>> Hi all, >>> >>> >>> I have a module with a envrionment defined in the following way: >>> >>> \def\startFOO#1\stopFOO{...#1...} >>> >>> >>> I try currently to write a command \defineFOO[MYFOO] that expands to my >>> already created environment. >>> >>> \startMYFOO#1\stopMYFOO -> \startFOO#1\stopFOO >>> >>> >>> I know it is possible to make this in the following way: >>> >>> \def\startMYFOO#1\stopMYFOO{\startFOO#1\stopFOO} >>> >>> but this not what I want. >> >> Something like this >> >> \def\defineFOO[#1]% >> {\setvalue{\c!start#1}{\startFOO} >> \setvalue{\c!stop#1} {\stopFOO}} >> > > Hi Aditya, > > > this can only be used if you define your environment in this way: > > \def\startFOO{...} > \def\stopFoo{...} > > > I defined my environment in this way: > > \def\startFOO#1\stopFOO{...} > > This means TeX reads everything from \startFOO till \stopFOO and looks > afterwards at the replacement text. I am not sure how something like that you work. > I used tried the first way with saving the content into a buffer and > using the buffer content. If you want to write to a buffer and later use it, there are low level macros to define your own buffer commands. Have a look at the R module to see an example. Depending on your usage, you will have to keep track of the buffer numbers on your own. Aditya ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: creating environments 2007-01-30 15:05 ` Aditya Mahajan @ 2007-01-31 10:15 ` Wolfgang Schuster 2007-01-31 10:59 ` Hans Hagen 0 siblings, 1 reply; 8+ messages in thread From: Wolfgang Schuster @ 2007-01-31 10:15 UTC (permalink / raw) To: ntg-context On Tue, 30 Jan 2007 10:05:23 -0500 (EST) Aditya Mahajan <adityam@umich.edu> wrote: > On Tue, 30 Jan 2007, Wolfgang Schuster wrote: > > > On Mon, 29 Jan 2007 10:15:34 -0500 (EST) > > Aditya Mahajan <adityam@umich.edu> wrote: > > > >> On Mon, 29 Jan 2007, Wolfgang Schuster wrote: > >> > >>> Hi all, > >>> > >>> > >>> I have a module with a envrionment defined in the following way: > >>> > >>> \def\startFOO#1\stopFOO{...#1...} > >>> > >>> > >>> I try currently to write a command \defineFOO[MYFOO] that expands to my > >>> already created environment. > >>> > >>> \startMYFOO#1\stopMYFOO -> \startFOO#1\stopFOO > >>> > >>> > >>> I know it is possible to make this in the following way: > >>> > >>> \def\startMYFOO#1\stopMYFOO{\startFOO#1\stopFOO} > >>> > >>> but this not what I want. > >> > >> Something like this > >> > >> \def\defineFOO[#1]% > >> {\setvalue{\c!start#1}{\startFOO} > >> \setvalue{\c!stop#1} {\stopFOO}} > >> > > > > Hi Aditya, > > > > > > this can only be used if you define your environment in this way: > > > > \def\startFOO{...} > > \def\stopFoo{...} > > > > > > I defined my environment in this way: > > > > \def\startFOO#1\stopFOO{...} > > > > This means TeX reads everything from \startFOO till \stopFOO and looks > > afterwards at the replacement text. > > I am not sure how something like that you work. > > > I used tried the first way with saving the content into a buffer and > > using the buffer content. > > If you want to write to a buffer and later use it, there are low level > macros to define your own buffer commands. Have a look at the R module > to see an example. Depending on your usage, you will have to keep > track of the buffer numbers on your own. > > Aditya Hi Aditya, I tried to use a buffer but you cannot make something like this: \starttext \placefigure {} {\startbuffer{mybuffer} Floating text from a buffer \stopbuffer \getbuffer{mybuffer}} \stoptext with content saved in a buffer. It's not a real problem but I wanted to know if it is possible to define a environment in the way I wanted. Wolfgang ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: creating environments 2007-01-31 10:15 ` Wolfgang Schuster @ 2007-01-31 10:59 ` Hans Hagen 2007-01-31 16:24 ` Wolfgang Schuster 0 siblings, 1 reply; 8+ messages in thread From: Hans Hagen @ 2007-01-31 10:59 UTC (permalink / raw) To: mailing list for ConTeXt users Wolfgang Schuster wrote: > On Tue, 30 Jan 2007 10:05:23 -0500 (EST) > Aditya Mahajan <adityam@umich.edu> wrote: > > >> On Tue, 30 Jan 2007, Wolfgang Schuster wrote: >> >> >>> On Mon, 29 Jan 2007 10:15:34 -0500 (EST) >>> Aditya Mahajan <adityam@umich.edu> wrote: >>> >>> >>>> On Mon, 29 Jan 2007, Wolfgang Schuster wrote: >>>> >>>> >>>>> Hi all, >>>>> >>>>> >>>>> I have a module with a envrionment defined in the following way: >>>>> >>>>> \def\startFOO#1\stopFOO{...#1...} >>>>> >>>>> >>>>> I try currently to write a command \defineFOO[MYFOO] that expands to my >>>>> already created environment. >>>>> >>>>> \startMYFOO#1\stopMYFOO -> \startFOO#1\stopFOO >>>>> >>>>> >>>>> I know it is possible to make this in the following way: >>>>> >>>>> \def\startMYFOO#1\stopMYFOO{\startFOO#1\stopFOO} >>>>> >>>>> but this not what I want. >>>>> >>>> Something like this >>>> >>>> \def\defineFOO[#1]% >>>> {\setvalue{\c!start#1}{\startFOO} >>>> \setvalue{\c!stop#1} {\stopFOO}} >>>> >>>> >>> Hi Aditya, >>> >>> >>> this can only be used if you define your environment in this way: >>> >>> \def\startFOO{...} >>> \def\stopFoo{...} >>> >>> >>> I defined my environment in this way: >>> >>> \def\startFOO#1\stopFOO{...} >>> >>> This means TeX reads everything from \startFOO till \stopFOO and looks >>> afterwards at the replacement text. >>> >> I am not sure how something like that you work. >> >> >>> I used tried the first way with saving the content into a buffer and >>> using the buffer content. >>> >> If you want to write to a buffer and later use it, there are low level >> macros to define your own buffer commands. Have a look at the R module >> to see an example. Depending on your usage, you will have to keep >> track of the buffer numbers on your own. >> >> Aditya >> > > Hi Aditya, > > I tried to use a buffer but you cannot make something like this: > > \starttext > > \placefigure > {} > {\startbuffer{mybuffer} > Floating text from a buffer > \stopbuffer > \getbuffer{mybuffer}} > > \stoptext > > with content saved in a buffer. > no, there is \setbuffer but in general (at least not in context mkii) buffers are to be defined at the outer level > It's not a real problem but I wanted to know if it is possible to > define a environment in the way I wanted. > -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: creating environments 2007-01-31 10:59 ` Hans Hagen @ 2007-01-31 16:24 ` Wolfgang Schuster 2007-02-05 13:01 ` Wolfgang Schuster 0 siblings, 1 reply; 8+ messages in thread From: Wolfgang Schuster @ 2007-01-31 16:24 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2848 bytes --] 2007/1/31, Hans Hagen <pragma@wxs.nl>: > > Wolfgang Schuster wrote: > > On Tue, 30 Jan 2007 10:05:23 -0500 (EST) > > Aditya Mahajan <adityam@umich.edu> wrote: > > > > > >> On Tue, 30 Jan 2007, Wolfgang Schuster wrote: > >> > >> > >>> On Mon, 29 Jan 2007 10:15:34 -0500 (EST) > >>> Aditya Mahajan <adityam@umich.edu> wrote: > >>> > >>> > >>>> On Mon, 29 Jan 2007, Wolfgang Schuster wrote: > >>>> > >>>> > >>>>> Hi all, > >>>>> > >>>>> > >>>>> I have a module with a envrionment defined in the following way: > >>>>> > >>>>> \def\startFOO#1\stopFOO{...#1...} > >>>>> > >>>>> > >>>>> I try currently to write a command \defineFOO[MYFOO] that expands to > my > >>>>> already created environment. > >>>>> > >>>>> \startMYFOO#1\stopMYFOO -> \startFOO#1\stopFOO > >>>>> > >>>>> > >>>>> I know it is possible to make this in the following way: > >>>>> > >>>>> \def\startMYFOO#1\stopMYFOO{\startFOO#1\stopFOO} > >>>>> > >>>>> but this not what I want. > >>>>> > >>>> Something like this > >>>> > >>>> \def\defineFOO[#1]% > >>>> {\setvalue{\c!start#1}{\startFOO} > >>>> \setvalue{\c!stop#1} {\stopFOO}} > >>>> > >>>> > >>> Hi Aditya, > >>> > >>> > >>> this can only be used if you define your environment in this way: > >>> > >>> \def\startFOO{...} > >>> \def\stopFoo{...} > >>> > >>> > >>> I defined my environment in this way: > >>> > >>> \def\startFOO#1\stopFOO{...} > >>> > >>> This means TeX reads everything from \startFOO till \stopFOO and looks > >>> afterwards at the replacement text. > >>> > >> I am not sure how something like that you work. > >> > >> > >>> I used tried the first way with saving the content into a buffer and > >>> using the buffer content. > >>> > >> If you want to write to a buffer and later use it, there are low level > >> macros to define your own buffer commands. Have a look at the R module > >> to see an example. Depending on your usage, you will have to keep > >> track of the buffer numbers on your own. > >> > >> Aditya > >> > > > > Hi Aditya, > > > > I tried to use a buffer but you cannot make something like this: > > > > \starttext > > > > \placefigure > > {} > > {\startbuffer{mybuffer} > > Floating text from a buffer > > \stopbuffer > > \getbuffer{mybuffer}} > > > > \stoptext > > > > with content saved in a buffer. > > > no, there is \setbuffer but in general (at least not in context mkii) > buffers are to be defined at the outer level > > It's not a real problem but I wanted to know if it is possible to > > define a environment in the way I wanted. > > Hi Hans, I looked into core-buf but this was not what I was looking for. What I want is a command like this: \def\defineFOO[#1]% {\expandafter\def\csname start#1\endcsname##1\csname stop#1\endcsname% {\startFOO##1\stopFOO}} and after I wrote \defineFOO[MYFOO] I can use the next command \startMYFOO...\stopMYFOO Wolfgang [-- Attachment #1.2: Type: text/html, Size: 4434 bytes --] [-- Attachment #2: Type: text/plain, Size: 139 bytes --] _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: creating environments 2007-01-31 16:24 ` Wolfgang Schuster @ 2007-02-05 13:01 ` Wolfgang Schuster 0 siblings, 0 replies; 8+ messages in thread From: Wolfgang Schuster @ 2007-02-05 13:01 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 3250 bytes --] 2007/1/31, Wolfgang Schuster <schuster.wolfgang@googlemail.com>: > > > > 2007/1/31, Hans Hagen <pragma@wxs.nl>: > > > > Wolfgang Schuster wrote: > > > On Tue, 30 Jan 2007 10:05:23 -0500 (EST) > > > Aditya Mahajan < adityam@umich.edu> wrote: > > > > > > > > >> On Tue, 30 Jan 2007, Wolfgang Schuster wrote: > > >> > > >> > > >>> On Mon, 29 Jan 2007 10:15:34 -0500 (EST) > > >>> Aditya Mahajan < adityam@umich.edu> wrote: > > >>> > > >>> > > >>>> On Mon, 29 Jan 2007, Wolfgang Schuster wrote: > > >>>> > > >>>> > > >>>>> Hi all, > > >>>>> > > >>>>> > > >>>>> I have a module with a envrionment defined in the following way: > > >>>>> > > >>>>> \def\startFOO#1\stopFOO{...#1...} > > >>>>> > > >>>>> > > >>>>> I try currently to write a command \defineFOO[MYFOO] that expands > > to my > > >>>>> already created environment. > > >>>>> > > >>>>> \startMYFOO#1\stopMYFOO -> \startFOO#1\stopFOO > > >>>>> > > >>>>> > > >>>>> I know it is possible to make this in the following way: > > >>>>> > > >>>>> \def\startMYFOO#1\stopMYFOO{\startFOO#1\stopFOO} > > >>>>> > > >>>>> but this not what I want. > > >>>>> > > >>>> Something like this > > >>>> > > >>>> \def\defineFOO[#1]% > > >>>> {\setvalue{\c!start#1}{\startFOO} > > >>>> \setvalue{\c!stop#1} {\stopFOO}} > > >>>> > > >>>> > > >>> Hi Aditya, > > >>> > > >>> > > >>> this can only be used if you define your environment in this way: > > >>> > > >>> \def\startFOO{...} > > >>> \def\stopFoo{...} > > >>> > > >>> > > >>> I defined my environment in this way: > > >>> > > >>> \def\startFOO#1\stopFOO{...} > > >>> > > >>> This means TeX reads everything from \startFOO till \stopFOO and > > looks > > >>> afterwards at the replacement text. > > >>> > > >> I am not sure how something like that you work. > > >> > > >> > > >>> I used tried the first way with saving the content into a buffer and > > > > >>> using the buffer content. > > >>> > > >> If you want to write to a buffer and later use it, there are low > > level > > >> macros to define your own buffer commands. Have a look at the R > > module > > >> to see an example. Depending on your usage, you will have to keep > > >> track of the buffer numbers on your own. > > >> > > >> Aditya > > >> > > > > > > Hi Aditya, > > > > > > I tried to use a buffer but you cannot make something like this: > > > > > > \starttext > > > > > > \placefigure > > > {} > > > {\startbuffer{mybuffer} > > > Floating text from a buffer > > > \stopbuffer > > > \getbuffer{mybuffer}} > > > > > > \stoptext > > > > > > with content saved in a buffer. > > > > > no, there is \setbuffer but in general (at least not in context mkii) > > buffers are to be defined at the outer level > > > It's not a real problem but I wanted to know if it is possible to > > > define a environment in the way I wanted. > > > > > > Hi Hans, > > I looked into core-buf but this was not what I was looking for. > > What I want is a command like this: > > \def\defineFOO[#1]% > {\expandafter\def\csname start#1\endcsname##1\csname stop#1\endcsname% > {\startFOO##1\stopFOO}} > > and after I wrote > > \defineFOO[MYFOO] > > I can use the next command > > \startMYFOO...\stopMYFOO > > Wolfgang > Hi all, I found now a solution for my problem. Thanks for all messages. Wolfgang [-- Attachment #1.2: Type: text/html, Size: 5237 bytes --] [-- Attachment #2: Type: text/plain, Size: 139 bytes --] _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-02-05 13:01 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2007-01-29 12:21 creating environments Wolfgang Schuster 2007-01-29 15:15 ` Aditya Mahajan 2007-01-30 13:01 ` Wolfgang Schuster 2007-01-30 15:05 ` Aditya Mahajan 2007-01-31 10:15 ` Wolfgang Schuster 2007-01-31 10:59 ` Hans Hagen 2007-01-31 16:24 ` Wolfgang Schuster 2007-02-05 13:01 ` Wolfgang Schuster
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).