* Re: Cambria: integral sign has wrong size
2011-06-30 8:46 Cambria: integral sign has wrong size Julian Becker
@ 2011-07-01 6:41 ` Taco Hoekwater
2011-07-01 7:25 ` Julian Becker
2011-07-01 6:57 ` Philipp Stephani
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Taco Hoekwater @ 2011-07-01 6:41 UTC (permalink / raw)
To: ntg-context
On 06/30/2011 10:46 AM, Julian Becker wrote:
> Hello everybody!
> I tried doing some math typesetting with Cambria, but somehow the
> integral sign comes out somewhat smaller than it should be.
> Running the following in the latest beta produces the attached pdf.
> Does anybody have an idea about what's going wrong here, or how to fix it?
It is a regression (it was ok with older context versions) but I am not
sure what is causing it. The most likely cause is that the metrics
patch to CambriaMath is no longer applied, but I do not quite remember
how to check that.
Best wishes,
Taco
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Cambria: integral sign has wrong size
2011-07-01 6:41 ` Taco Hoekwater
@ 2011-07-01 7:25 ` Julian Becker
2011-07-01 8:14 ` Khaled Hosny
0 siblings, 1 reply; 8+ messages in thread
From: Julian Becker @ 2011-07-01 7:25 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1508 bytes --]
In this case, is there a quick workaround? I tried something like redefining
\int
using
\def\int{\getglyph{CambriaMath}{\char"F05C2}\intlimits}
This gives the desired result in displaystyle, but is incompatible with
scriptstyle math. Is there a way to adapt this workaround to account for
this in some way?
Best regards,
Julian
2011/7/1 Taco Hoekwater <taco@elvenkind.com>
> On 06/30/2011 10:46 AM, Julian Becker wrote:
>
>> Hello everybody!
>> I tried doing some math typesetting with Cambria, but somehow the
>> integral sign comes out somewhat smaller than it should be.
>> Running the following in the latest beta produces the attached pdf.
>> Does anybody have an idea about what's going wrong here, or how to fix it?
>>
>
> It is a regression (it was ok with older context versions) but I am not
> sure what is causing it. The most likely cause is that the metrics
> patch to CambriaMath is no longer applied, but I do not quite remember
> how to check that.
>
> Best wishes,
> Taco
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
>
> ___________________________________________________________________________________
>
[-- Attachment #1.2: Type: text/html, Size: 2417 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Cambria: integral sign has wrong size
2011-07-01 7:25 ` Julian Becker
@ 2011-07-01 8:14 ` Khaled Hosny
2011-07-01 8:26 ` Julian Becker
0 siblings, 1 reply; 8+ messages in thread
From: Khaled Hosny @ 2011-07-01 8:14 UTC (permalink / raw)
To: mailing list for ConTeXt users
Try setting \Umathoperatorsize\displaystyle=2em or so until you find a
suitable value.
On Fri, Jul 01, 2011 at 09:25:27AM +0200, Julian Becker wrote:
> In this case, is there a quick workaround? I tried something like redefining \
> int
> using
> \def\int{\getglyph{CambriaMath}{\char"F05C2}\intlimits}
>
> This gives the desired result in displaystyle, but is incompatible with
> scriptstyle math. Is there a way to adapt this workaround to account for this
> in some way?
>
> Best regards,
> Julian
>
>
> 2011/7/1 Taco Hoekwater <taco@elvenkind.com>
>
> On 06/30/2011 10:46 AM, Julian Becker wrote:
>
> Hello everybody!
> I tried doing some math typesetting with Cambria, but somehow the
> integral sign comes out somewhat smaller than it should be.
> Running the following in the latest beta produces the attached pdf.
> Does anybody have an idea about what's going wrong here, or how to fix
> it?
>
>
> It is a regression (it was ok with older context versions) but I am not
> sure what is causing it. The most likely cause is that the metrics
> patch to CambriaMath is no longer applied, but I do not quite remember
> how to check that.
>
> Best wishes,
> Taco
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/
> ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
--
Khaled Hosny
Egyptian
Arab
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Cambria: integral sign has wrong size
2011-07-01 8:14 ` Khaled Hosny
@ 2011-07-01 8:26 ` Julian Becker
0 siblings, 0 replies; 8+ messages in thread
From: Julian Becker @ 2011-07-01 8:26 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 3089 bytes --]
Thanks Khaled,
this works like a charm!
Best wishes,
Julian
2011/7/1 Khaled Hosny <khaledhosny@eglug.org>
> Try setting \Umathoperatorsize\displaystyle=2em or so until you find a
> suitable value.
>
> On Fri, Jul 01, 2011 at 09:25:27AM +0200, Julian Becker wrote:
> > In this case, is there a quick workaround? I tried something like
> redefining \
> > int
> > using
> > \def\int{\getglyph{CambriaMath}{\char"F05C2}\intlimits}
> >
> > This gives the desired result in displaystyle, but is incompatible with
> > scriptstyle math. Is there a way to adapt this workaround to account for
> this
> > in some way?
> >
> > Best regards,
> > Julian
> >
> >
> > 2011/7/1 Taco Hoekwater <taco@elvenkind.com>
> >
> > On 06/30/2011 10:46 AM, Julian Becker wrote:
> >
> > Hello everybody!
> > I tried doing some math typesetting with Cambria, but somehow the
> > integral sign comes out somewhat smaller than it should be.
> > Running the following in the latest beta produces the attached
> pdf.
> > Does anybody have an idea about what's going wrong here, or how
> to fix
> > it?
> >
> >
> > It is a regression (it was ok with older context versions) but I am
> not
> > sure what is causing it. The most likely cause is that the metrics
> > patch to CambriaMath is no longer applied, but I do not quite
> remember
> > how to check that.
> >
> > Best wishes,
> > Taco
> >
> ___________________________________________________________________________________
> > If your question is of interest to others as well, please add an
> entry to
> > the Wiki!
> >
> > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/
> > ntg-context
> > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> > archive : http://foundry.supelec.fr/projects/contextrev/
> > wiki : http://contextgarden.net
> >
> ___________________________________________________________________________________
> >
> >
>
> >
> ___________________________________________________________________________________
> > If your question is of interest to others as well, please add an entry to
> the Wiki!
> >
> > maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> > archive : http://foundry.supelec.fr/projects/contextrev/
> > wiki : http://contextgarden.net
> >
> ___________________________________________________________________________________
>
>
> --
> Khaled Hosny
> Egyptian
> Arab
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
>
> ___________________________________________________________________________________
>
[-- Attachment #1.2: Type: text/html, Size: 4924 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Cambria: integral sign has wrong size
2011-06-30 8:46 Cambria: integral sign has wrong size Julian Becker
2011-07-01 6:41 ` Taco Hoekwater
@ 2011-07-01 6:57 ` Philipp Stephani
2011-07-01 15:31 ` Hans Hagen
2011-07-09 9:41 ` views63
3 siblings, 0 replies; 8+ messages in thread
From: Philipp Stephani @ 2011-07-01 6:57 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 20:59, schrieb Julian Becker:
> Hello everybody!
> I tried doing some math typesetting with Cambria, but somehow the
> integral sign comes out somewhat smaller than it should be.
> Running the following in the latest beta produces the attached pdf.
> Does anybody have an idea about what's going wrong here, or how to fix it?
>
> Julian
>
> ----
> \usetypescript[cambria]
> \setupbodyfont[cambria,10pt]
>
> \startTEXpage
> \startformula
> \prod_a^b \sum_{n=0}^\infty \int_0^\infty e^{-{\bi\beta}^2}\, {\rm
> d}^3{\bi \beta}
> \stopformula
> \stopTEXpage
> ----
This is a known bug in the Cambria font, the size of the big operators
is not set correctly, but AFAIK ConTeXt already accounts for this by
applying a custom font patch.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Cambria: integral sign has wrong size
2011-06-30 8:46 Cambria: integral sign has wrong size Julian Becker
2011-07-01 6:41 ` Taco Hoekwater
2011-07-01 6:57 ` Philipp Stephani
@ 2011-07-01 15:31 ` Hans Hagen
2011-07-09 9:41 ` views63
3 siblings, 0 replies; 8+ messages in thread
From: Hans Hagen @ 2011-07-01 15:31 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 30-6-2011 10:46, Julian Becker wrote:
> Hello everybody!
> I tried doing some math typesetting with Cambria, but somehow the integral
> sign comes out somewhat smaller than it should be.
> Running the following in the latest beta produces the attached pdf. Does
> anybody have an idea about what's going wrong here, or how to fix it?
It will be fixed in the next beta, in the meantime you can replace
cambria-math.lfg by this:
local function FixDisplayOperatorMinHeight(value,target,original)
local o = original.mathparameters.DisplayOperatorMinHeight
if o < 2800 then
return 2800 * target.parameters.factor
else
return value -- already scaled
end
end
return {
name = "cambria-math",
version = "1.00",
comment = "Goodies that complement cambria.",
author = "Hans Hagen",
copyright = "ConTeXt development team",
mathematics = {
parameters = {
DisplayOperatorMinHeight = FixDisplayOperatorMinHeight,
}
}
}
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Cambria: integral sign has wrong size
2011-06-30 8:46 Cambria: integral sign has wrong size Julian Becker
` (2 preceding siblings ...)
2011-07-01 15:31 ` Hans Hagen
@ 2011-07-09 9:41 ` views63
3 siblings, 0 replies; 8+ messages in thread
From: views63 @ 2011-07-09 9:41 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1199 bytes --]
Hello all,
It was the same in the Charter,Utopia and Garamond.
--
Best regards,
Huang Ze
2011/6/30 Julian Becker <becker.julian@gmail.com>
> Hello everybody!
> I tried doing some math typesetting with Cambria, but somehow the integral
> sign comes out somewhat smaller than it should be.
> Running the following in the latest beta produces the attached pdf. Does
> anybody have an idea about what's going wrong here, or how to fix it?
>
> Julian
>
> ----
> \usetypescript[cambria]
> \setupbodyfont[cambria,10pt]
>
> \startTEXpage
> \startformula
> \prod_a^b \sum_{n=0}^\infty \int_0^\infty e^{-{\bi\beta}^2}\, {\rm d}^3{\bi
> \beta}
> \stopformula
> \stopTEXpage
> ----
>
>
>
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
>
> ___________________________________________________________________________________
>
[-- Attachment #1.2: Type: text/html, Size: 2077 bytes --]
[-- Attachment #2: test.pdf --]
[-- Type: application/pdf, Size: 41978 bytes --]
[-- Attachment #3: test.tex --]
[-- Type: application/x-tex, Size: 1083 bytes --]
[-- Attachment #4: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread