* Help with citation layout. @ 2011-11-16 19:10 Christian 2011-11-16 21:09 ` Pontus Lurcock 0 siblings, 1 reply; 4+ messages in thread From: Christian @ 2011-11-16 19:10 UTC (permalink / raw) To: mailing list for ConTeXt users Dear list, I need the help of a BibTeX/citation module expert. I want to modify the appearance of @INBOOK entries. Currently they look like this (apa-de style): author (year) _booktitle_, Chapter chaptertitle, pages, publisher, edition. What I'm aming for is this: author (year) _chaptertitle_, In editor (Edt.): _booktitle_, pages, publisher, edition. Where chaptertitle refers to the title of the chapter (usually some sort of article or essay), very similar to arttitle. Is there a way to accomplish this? Or is the INBOOK entry not meant to do this? I'm especially having trouble to get the editor to show up (let alone having "In " in front of it). Does editor and author conflict here? Thank you for you help! ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Help with citation layout. 2011-11-16 19:10 Help with citation layout Christian @ 2011-11-16 21:09 ` Pontus Lurcock 2011-11-16 21:45 ` Christian 0 siblings, 1 reply; 4+ messages in thread From: Pontus Lurcock @ 2011-11-16 21:09 UTC (permalink / raw) To: ntg-context On Wed 16 Nov 2011, Christian wrote: > I need the help of a BibTeX/citation module expert. I want to modify the appearance of @INBOOK entries. > Currently they look like this (apa-de style): > > author (year) _booktitle_, Chapter chaptertitle, pages, publisher, edition. > > What I'm aming for is this: > > author (year) _chaptertitle_, In editor (Edt.): _booktitle_, pages, publisher, edition. > > Where chaptertitle refers to the title of the chapter (usually some sort of article or essay), very similar to arttitle. I encountered the same problem a while ago and discovered that using @incollection solves it. (The documentation at http://www.kfunigraz.ac.at/~binder/texhelp/bibtx-12.html implies that @inbook only supports a chapter number or page range, rather than a titled section.) Example: @incollection{ernst1989anisotropy, title = {Averaging of anisotropy of magnetic susceptibility data}, author = {Ernst, R. E. and Pearce, G. W.}, booktitle = {Statistical Applications in the Earth Sciences}, editor = {Agterberg, F. P. and Bonham-Carter, G. F.}, note = {Paper 89-9}, pages = {297--305}, year = {1989}, publisher = {Geological Survey of Canada} } With the default bibliography style this typesets to: Ernst, R. E. and Pearce, G. W. (1989). Averaging of anisotropy of magnetic susceptibility data. In Agterberg, F. P. and Bonham-Carter, G. F., editors, _Statistical Applications in the Earth Sciences_, pages 297–305. Geological Survey of Canada. Paper 89-9. Pont ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Help with citation layout. 2011-11-16 21:09 ` Pontus Lurcock @ 2011-11-16 21:45 ` Christian 2011-11-16 21:50 ` Christian 0 siblings, 1 reply; 4+ messages in thread From: Christian @ 2011-11-16 21:45 UTC (permalink / raw) To: 'mailing list for ConTeXt users' > > I need the help of a BibTeX/citation module expert. I want to modify the > appearance of @INBOOK entries. > > Currently they look like this (apa-de style): > > > > author (year) _booktitle_, Chapter chaptertitle, pages, publisher, edition. > > > > What I'm aming for is this: > > > > author (year) _chaptertitle_, In editor (Edt.): _booktitle_, pages, publisher, > edition. > > > > Where chaptertitle refers to the title of the chapter (usually some sort of > article or essay), very similar to arttitle. > > I encountered the same problem a while ago and discovered that using > @incollection solves it. (The documentation at > http://www.kfunigraz.ac.at/~binder/texhelp/bibtx-12.html implies that > @inbook only supports a chapter number or page range, rather than a titled > section.) Example: > > @incollection{ernst1989anisotropy, > title = {Averaging of anisotropy of magnetic susceptibility data}, > author = {Ernst, R. E. and Pearce, G. W.}, > booktitle = {Statistical Applications in the Earth Sciences}, > editor = {Agterberg, F. P. and Bonham-Carter, G. F.}, > note = {Paper 89-9}, > pages = {297--305}, > year = {1989}, > publisher = {Geological Survey of Canada} } > > With the default bibliography style this typesets to: > > Ernst, R. E. and Pearce, G. W. (1989). Averaging of anisotropy of magnetic > susceptibility data. In Agterberg, F. P. and Bonham-Carter, G. F., editors, > _Statistical Applications in the Earth Sciences_, pages 297–305. Geological > Survey of Canada. Paper 89-9. Thanks Pont, that is already helpful to know that others encountered this problem, too. However, @inbook supports a chapter title that is placed with \insertchapter. So I thought I could put the "arttitle" in the chapter field and the book title in the title field of bibtex. But I did not manage to get the author and the editor in my layout. Example: % Bibtex: @INBOOK{naunin07, author ={Dietrich Naunin}, editor = {Dietrich Naunin}, title = {Hybrid-, Batterie- und Brennstoffzellen-Elektrofahrzeuge: Technik, Strukturen und Entwicklungen}, chapter = {Elektrische Antriebssysteme}, editor = {Dietrich Naunin}, pages = {20-33}, address = {Renningen}, publisher = {expert-Verlag}, year = {2007}, edition = {4.}, ISBN = {3-8169-2625-8}, } % Context: \setuppublicationlayout[inbook]{% \insertauthors{}{ }{}% \insertpubyear{(}{). }{\unskip.}% \insertchapter{\bgroup \it}{\egroup. }{\unskip}% \inserteditors{In\ }{, editors: }{}% \inserttitle{\bgroup \it}{\egroup. }{\unskip}% \insertpages{}{}{}%} With this I get: Naunin, Dietrich (2007). _Elektrische Antriebssysteme_. _Hybrid-, Batterie- und Brennstoff- zellen-Elektrofahrzeuge: Technik, Strukturen und Entwicklungen_. 20-33 The editor is not inserted, but the pages are :( This may be a bad example since the author of the chapter is the editor, but it's also not working anywhere else. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Help with citation layout. 2011-11-16 21:45 ` Christian @ 2011-11-16 21:50 ` Christian 0 siblings, 0 replies; 4+ messages in thread From: Christian @ 2011-11-16 21:50 UTC (permalink / raw) To: 'mailing list for ConTeXt users' > > > I need the help of a BibTeX/citation module expert. I want to modify > > > the > > appearance of @INBOOK entries. > > > Currently they look like this (apa-de style): > > > > > > author (year) _booktitle_, Chapter chaptertitle, pages, publisher, edition. > > > > > > What I'm aming for is this: > > > > > > author (year) _chaptertitle_, In editor (Edt.): _booktitle_, pages, > > > publisher, > > edition. > > > > > > Where chaptertitle refers to the title of the chapter (usually some > > > sort of > > article or essay), very similar to arttitle. > > > > I encountered the same problem a while ago and discovered that using > > @incollection solves it. (The documentation at > > http://www.kfunigraz.ac.at/~binder/texhelp/bibtx-12.html implies that > > @inbook only supports a chapter number or page range, rather than a > > titled > > section.) Example: > > > > @incollection{ernst1989anisotropy, > > title = {Averaging of anisotropy of magnetic susceptibility data}, > > author = {Ernst, R. E. and Pearce, G. W.}, > > booktitle = {Statistical Applications in the Earth Sciences}, > > editor = {Agterberg, F. P. and Bonham-Carter, G. F.}, > > note = {Paper 89-9}, > > pages = {297--305}, > > year = {1989}, > > publisher = {Geological Survey of Canada} } > > > > With the default bibliography style this typesets to: > > > > Ernst, R. E. and Pearce, G. W. (1989). Averaging of anisotropy of > > magnetic susceptibility data. In Agterberg, F. P. and Bonham-Carter, > > G. F., editors, _Statistical Applications in the Earth Sciences_, > > pages 297–305. Geological Survey of Canada. Paper 89-9. > > Thanks Pont, that is already helpful to know that others encountered this > problem, too. > > However, @inbook supports a chapter title that is placed with \insertchapter. > So I thought I could put the "arttitle" in the chapter field and the book title in > the title field of bibtex. > But I did not manage to get the author and the editor in my layout. > > Example: > % Bibtex: > @INBOOK{naunin07, > author ={Dietrich Naunin}, > editor = {Dietrich Naunin}, > title = {Hybrid-, Batterie- und Brennstoffzellen-Elektrofahrzeuge: > Technik, Strukturen und Entwicklungen}, > chapter = {Elektrische Antriebssysteme}, > editor = {Dietrich Naunin}, > pages = {20-33}, > address = {Renningen}, > publisher = {expert-Verlag}, > year = {2007}, > edition = {4.}, > ISBN = {3-8169-2625-8}, > } > % Context: > \setuppublicationlayout[inbook]{% > \insertauthors{}{ }{}% > \insertpubyear{(}{). }{\unskip.}% > \insertchapter{\bgroup \it}{\egroup. }{\unskip}% \inserteditors{In\ }{, > editors: }{}% \inserttitle{\bgroup \it}{\egroup. }{\unskip}% > \insertpages{}{}{}%} > > With this I get: > > Naunin, Dietrich (2007). _Elektrische Antriebssysteme_. _Hybrid-, Batterie- > und Brennstoff- > zellen-Elektrofahrzeuge: Technik, Strukturen und Entwicklungen_. 20-33 > > The editor is not inserted, but the pages are :( This may be a bad example > since the author of the chapter is the editor, but it's also not working > anywhere else. OK, I just checked, the editor doesn't even make it into the bbl-file :P I guess that’s why Wikipedia says "author or editor" (not both, I guess). So I guess theres only a non-clean way to do this. Using incollection (probably better), like you suggested, Pont, or inserting the editor in another field an customizing the inbook appearance. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-11-16 21:50 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-11-16 19:10 Help with citation layout Christian 2011-11-16 21:09 ` Pontus Lurcock 2011-11-16 21:45 ` Christian 2011-11-16 21:50 ` Christian
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).