* Part label and chapter numbers @ 2021-01-04 2:22 jbf 2021-01-04 9:27 ` Marco Patzer 0 siblings, 1 reply; 4+ messages in thread From: jbf @ 2021-01-04 2:22 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1496 bytes --] This is a Mark IV issue rather than LMTX, and while it is almost certainly simple enough, I seem to have got myself confused and am not getting the results I need. essentially I am dealing with a book that is divided into parts and chapter, but the parts need to be called 'Section' not 'Part', and the Chapter numbers need to be words and sequential throughout the book, not restarting at each part/section. Issue 1: Parts need to be called 'Section' (Section 1, section 2 etc.). I thought I could achieve this with: \setuphead [part] [ placehead=yes, bodypartlabel=section, ] but then I just get the number 1, 2, not Section 1, Section 2 Of course, if I write bodypartlabel=part, then I do get Part 1, Part 2, etc. How do I achieve 'Section' rather than 'Part'? Issue 2: While the above 'sections' are numbered in arabic numbers, Chapters are meant to be in words. I thought I could do it with \setuphead [chapter] [deepnumbercommand=\convertnumber{words}] but this throws an error. How do I achieve this? I want Chapter One, not Chapter 1.1 Issue 3 might already be solved once I resolve Issue 2! But given that I have parts, the chapters at the moment come out as Chapter 1.1... Chapter 2.1 etc. and I simply want Chapter One, Chapter Two and so on, sequentially throughout the book. I thought I might be able to do it with something like \setuphead[section-2][bodypartconversion=Characters] |But that doesn't work. Any thoughts? Julian | [-- Attachment #1.2: Type: text/html, Size: 4239 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Part label and chapter numbers 2021-01-04 2:22 Part label and chapter numbers jbf @ 2021-01-04 9:27 ` Marco Patzer [not found] ` <138bedb9-f559-cf6b-db34-e012f8c19ddb@gmail.com> 0 siblings, 1 reply; 4+ messages in thread From: Marco Patzer @ 2021-01-04 9:27 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, 4 Jan 2021 13:22:55 +1100 jbf <roma83537@gmail.com> wrote: > Issue 1: > > Parts need to be called 'Section' (Section 1, section 2 etc.). \setuphead [part] [placehead=yes, bodypartlabel=part] \setuplabeltext [part=Section\nobreakspace] > Issue 2: > > While the above 'sections' are numbered in arabic numbers, Chapters > are meant to be in words. \setuplabeltext [chapter=Chapter\nobreakspace] \setuphead [chapter] [conversion=Words] > Issue 3 might already be solved once I resolve Issue 2! > > But given that I have parts, the chapters at the moment come out as > Chapter 1.1... Chapter 2.1 etc. and I simply want Chapter One, > Chapter Two and so on \setuphead [chapter] [sectionsegments=chapter] \setuphead [section] [sectionsegments=chapter:section] > Any thoughts? An MWE would have been nice to have. Marco ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <138bedb9-f559-cf6b-db34-e012f8c19ddb@gmail.com>]
* Re: Part label and chapter numbers [not found] ` <138bedb9-f559-cf6b-db34-e012f8c19ddb@gmail.com> @ 2021-01-04 22:09 ` Marco Patzer 2021-01-04 22:27 ` jbf 0 siblings, 1 reply; 4+ messages in thread From: Marco Patzer @ 2021-01-04 22:09 UTC (permalink / raw) To: mailing list for ConTeXt users On Tue, 5 Jan 2021 08:32:33 +1100 jbf <roma83537@gmail.com> wrote: > and apologies if you didn't think I provided an MWE. The idea is that people can just copy-paste the code into an editor and keep tweaking. It doesn't have to produce the correct output, but it should compile. If you add an MWE you're more likely to get a response. > Of the three issues below, only the first is not resolved, meaning > that part=Section\nobreakspace does not make any difference, or put > another way, at least it stops things from throwing an error, but the > result I get is not 'Section 1. My title' but simply '1. My title'. Here's what an MWE with the code I posted looks like: \setuphead [part] [placehead=yes, bodypartlabel=part] \setuplabeltext [part=Section\nobreakspace] \setuplabeltext [chapter=Chapter\nobreakspace] \setuphead [chapter] [conversion=Words] \setuphead [chapter] [sectionsegments=chapter] \setuphead [section] [sectionsegments=chapter:section] \starttext \startpart [title=Mypart] \startchapter [title=Some Chapter] \startsection [title=Some Section] \samplefile{knuth} \stopsection \stopchapter \stoppart \stoptext And the string “Section 1 Mypart” shows up there. > Below is exactly what I have in my preamble. Note that I have also > included \setuphead [section] which is the true 'section' level below > 'chapter'. Is it possible that this causes some confusion? > Unfortunately, the author still wants 'Part' to be actually named as > 'Section'! > > \setuphead > [part] > [ > placehead=yes, > page=no, > bodypartlabel=part > ] First, there a bunch of (U+00A0) NO-BREAK SPACEs in your code. I don't know if that's added by your mail client or if that's actually in your code. If it's also in the code: Context doesn't like it. The NO-BREAK SPACEs have to go. Second, you have a space (new line) after “bodypartlabel=part”. Add a comma, percent sign or move the closing bracket after the word “part”. Marco ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Part label and chapter numbers 2021-01-04 22:09 ` Marco Patzer @ 2021-01-04 22:27 ` jbf 0 siblings, 0 replies; 4+ messages in thread From: jbf @ 2021-01-04 22:27 UTC (permalink / raw) To: Marco Patzer; +Cc: mailing list for ConTeXt users Indeed the no-break spaces were the problem, something I had quite overlooked (so have made a 'message to brain' not to overlook this in the future). I did know about the use of %, but if one searches on the Contextgarden Wiki for \nobreakspace, one finds nothing. Clearly a TeX command that one just has to know! Once again thank you for gently moving me in the right direction! Julian On 5/1/21 9:09 am, Marco Patzer wrote: > On Tue, 5 Jan 2021 08:32:33 +1100 > jbf <roma83537@gmail.com> wrote: > >> and apologies if you didn't think I provided an MWE. > The idea is that people can just copy-paste the code into an editor > and keep tweaking. It doesn't have to produce the correct output, > but it should compile. If you add an MWE you're more likely to get a > response. > >> Of the three issues below, only the first is not resolved, meaning >> that part=Section\nobreakspace does not make any difference, or put >> another way, at least it stops things from throwing an error, but the >> result I get is not 'Section 1. My title' but simply '1. My title'. > Here's what an MWE with the code I posted looks like: > > \setuphead > [part] > [placehead=yes, > bodypartlabel=part] > > \setuplabeltext > [part=Section\nobreakspace] > > \setuplabeltext > [chapter=Chapter\nobreakspace] > > \setuphead > [chapter] > [conversion=Words] > > \setuphead > [chapter] > [sectionsegments=chapter] > > \setuphead > [section] > [sectionsegments=chapter:section] > > \starttext > \startpart [title=Mypart] > \startchapter [title=Some Chapter] > \startsection [title=Some Section] > \samplefile{knuth} > \stopsection > \stopchapter > \stoppart > \stoptext > > And the string “Section 1 Mypart” shows up there. > >> Below is exactly what I have in my preamble. Note that I have also >> included \setuphead [section] which is the true 'section' level below >> 'chapter'. Is it possible that this causes some confusion? >> Unfortunately, the author still wants 'Part' to be actually named as >> 'Section'! >> >> \setuphead >> [part] >> [ >> placehead=yes, >> page=no, >> bodypartlabel=part >> ] > First, there a bunch of (U+00A0) NO-BREAK SPACEs in your code. I > don't know if that's added by your mail client or if that's actually > in your code. If it's also in the code: Context doesn't like it. The > NO-BREAK SPACEs have to go. > > Second, you have a space (new line) after “bodypartlabel=part”. Add > a comma, percent sign or move the closing bracket after the word > “part”. > > Marco > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-01-04 22:27 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-01-04 2:22 Part label and chapter numbers jbf 2021-01-04 9:27 ` Marco Patzer [not found] ` <138bedb9-f559-cf6b-db34-e012f8c19ddb@gmail.com> 2021-01-04 22:09 ` Marco Patzer 2021-01-04 22:27 ` jbf
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).