* Loop?
@ 2021-02-12 18:39 Angel M Alganza
2021-02-12 18:50 ` Loop? Thomas A. Schmitz
2021-02-12 18:50 ` Loop? Jairo A. del Rio
0 siblings, 2 replies; 12+ messages in thread
From: Angel M Alganza @ 2021-02-12 18:39 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hello:
I am trying to print a list of names always followed by the same info
(generated by a new command). At the moment, I have all the names
followed by the command like so:
Person Number One
\mycommand
Person Number Two
\mycommand
Person Number Three
\mycommand
Person Number Four
\mycommand
Person Number Five
\mycommand
.
.
.
I'd rather have the list of people stored somewhere (a list? an array?)
and loop through it and then inserting \mynewcommand at compilation
time. That way, when I need to replace the list of people with a new
one, I'd just do that instead of building the above structure again and
again.
Is it possible to do that with just ConTeXt or would I need to resort to
Lua. I guess it should be possible both ways, but I haven't figure out
how to do it. Any pointer, please?
Thank you so much in advance.
Cheers,
Ángel
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-12 18:39 Loop? Angel M Alganza
@ 2021-02-12 18:50 ` Thomas A. Schmitz
2021-02-12 18:50 ` Loop? Jairo A. del Rio
1 sibling, 0 replies; 12+ messages in thread
From: Thomas A. Schmitz @ 2021-02-12 18:50 UTC (permalink / raw)
To: ntg-context
On 2/12/21 7:39 PM, Angel M Alganza wrote:
> Is it possible to do that with just ConTeXt or would I need to resort to
> Lua. I guess it should be possible both ways, but I haven't figure out
> how to do it. Any pointer, please?
https://wiki.contextgarden.net/Processing_Lists
which wasn't particularly difficult to find.
Thomas
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-12 18:39 Loop? Angel M Alganza
2021-02-12 18:50 ` Loop? Thomas A. Schmitz
@ 2021-02-12 18:50 ` Jairo A. del Rio
2021-02-12 18:52 ` Loop? Jairo A. del Rio
` (2 more replies)
1 sibling, 3 replies; 12+ messages in thread
From: Jairo A. del Rio @ 2021-02-12 18:50 UTC (permalink / raw)
To: Angel M Alganza, mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1968 bytes --]
Hi, Ángel. Like this?
\def\mylist{Fulano,Mengano,Sutano}
\def\mycommand#1{#1\blank{\red Something here}\blank}
\starttext
\processcommacommand[\mylist]\mycommand
\stoptext
There are better ways to deal with data in ConTeXt, but it's basically that
way, I think.
Jairo
El vie, 12 de feb. de 2021 a la(s) 13:44, Angel M Alganza (ama@ugr.es)
escribió:
> Hello:
>
> I am trying to print a list of names always followed by the same info
> (generated by a new command). At the moment, I have all the names
> followed by the command like so:
>
> Person Number One
> \mycommand
> Person Number Two
> \mycommand
> Person Number Three
> \mycommand
> Person Number Four
> \mycommand
> Person Number Five
> \mycommand
> .
> .
> .
>
> I'd rather have the list of people stored somewhere (a list? an array?)
> and loop through it and then inserting \mynewcommand at compilation
> time. That way, when I need to replace the list of people with a new
> one, I'd just do that instead of building the above structure again and
> again.
>
> Is it possible to do that with just ConTeXt or would I need to resort to
> Lua. I guess it should be possible both ways, but I haven't figure out
> how to do it. Any pointer, please?
>
> Thank you so much in advance.
>
> Cheers,
> Ángel
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
>
> ___________________________________________________________________________________
>
[-- Attachment #1.2: Type: text/html, Size: 3361 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-12 18:50 ` Loop? Jairo A. del Rio
@ 2021-02-12 18:52 ` Jairo A. del Rio
2021-02-12 19:25 ` Loop? Wolfgang Schuster
2021-02-12 19:49 ` Loop? Angel M Alganza
2 siblings, 0 replies; 12+ messages in thread
From: Jairo A. del Rio @ 2021-02-12 18:52 UTC (permalink / raw)
To: Angel M Alganza, mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 2208 bytes --]
Oops, it's "zutano". Sorry for the typo.
Jairo :)
El vie, 12 de feb. de 2021 a la(s) 13:50, Jairo A. del Rio (
jairoadelrio6@gmail.com) escribió:
> Hi, Ángel. Like this?
>
> \def\mylist{Fulano,Mengano,Sutano}
>
> \def\mycommand#1{#1\blank{\red Something here}\blank}
>
> \starttext
>
> \processcommacommand[\mylist]\mycommand
>
> \stoptext
>
> There are better ways to deal with data in ConTeXt, but it's basically
> that way, I think.
>
> Jairo
>
>
>
> El vie, 12 de feb. de 2021 a la(s) 13:44, Angel M Alganza (ama@ugr.es)
> escribió:
>
>> Hello:
>>
>> I am trying to print a list of names always followed by the same info
>> (generated by a new command). At the moment, I have all the names
>> followed by the command like so:
>>
>> Person Number One
>> \mycommand
>> Person Number Two
>> \mycommand
>> Person Number Three
>> \mycommand
>> Person Number Four
>> \mycommand
>> Person Number Five
>> \mycommand
>> .
>> .
>> .
>>
>> I'd rather have the list of people stored somewhere (a list? an array?)
>> and loop through it and then inserting \mynewcommand at compilation
>> time. That way, when I need to replace the list of people with a new
>> one, I'd just do that instead of building the above structure again and
>> again.
>>
>> Is it possible to do that with just ConTeXt or would I need to resort to
>> Lua. I guess it should be possible both ways, but I haven't figure out
>> how to do it. Any pointer, please?
>>
>> Thank you so much in advance.
>>
>> Cheers,
>> Ángel
>>
>> ___________________________________________________________________________________
>> If your question is of interest to others as well, please add an entry to
>> the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
>> archive : https://bitbucket.org/phg/context-mirror/commits/
>> wiki : http://contextgarden.net
>>
>> ___________________________________________________________________________________
>>
>
[-- Attachment #1.2: Type: text/html, Size: 3838 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-12 18:50 ` Loop? Jairo A. del Rio
2021-02-12 18:52 ` Loop? Jairo A. del Rio
@ 2021-02-12 19:25 ` Wolfgang Schuster
2021-02-12 19:48 ` Loop? Jairo A. del Rio
2021-02-12 19:49 ` Loop? Angel M Alganza
2 siblings, 1 reply; 12+ messages in thread
From: Wolfgang Schuster @ 2021-02-12 19:25 UTC (permalink / raw)
To: mailing list for ConTeXt users, Jairo A. del Rio
Jairo A. del Rio schrieb am 12.02.2021 um 19:50:
> Hi, Ángel. Like this?
>
> \def\mylist{Fulano,Mengano,Sutano}
>
> \def\mycommand#1{#1\blank{\red Something here}\blank}
>
> \starttext
>
> \processcommacommand[\mylist]\mycommand
>
> \stoptext
>
> There are better ways to deal with data in ConTeXt, but it's basically
> that way, I think.
You can use the commalist environment:
\starttext
\startprocesscommalist[One,Two,Three,Four]
Person Number \currentcommalistitem\par
\stopprocesscommalist
\blank
\defineexpandable\NameList{One,Two,Three,Four}
\startprocesscommacommand[\NameList]
Person Number \currentcommalistitem\par
\stopprocesscommacommand
\stoptext
Another way is to use the database module:
\usemodule[database]
\starttext
\defineseparatedlist
[namelist]
[command=\NameEntry]
\starttexdefinition unexpanded NameEntry #1
Person Number #1\par
\stoptexdefinition
\startseparatedlist[namelist]
One
Two
Three
Four
\stopseparatedlist
\stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-12 19:25 ` Loop? Wolfgang Schuster
@ 2021-02-12 19:48 ` Jairo A. del Rio
2021-02-13 10:42 ` Loop? Angel M Alganza
0 siblings, 1 reply; 12+ messages in thread
From: Jairo A. del Rio @ 2021-02-12 19:48 UTC (permalink / raw)
To: Wolfgang Schuster; +Cc: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1488 bytes --]
Oh, I knew about the environment form, but I didn't know about
\currentcommalistitem. Useful to avoid to define ad hoc commands :)
As always, thank you very much for the lesson.
Best regards,
Jairo
El vie, 12 de feb. de 2021 a la(s) 14:25, Wolfgang Schuster (
wolfgang.schuster.lists@gmail.com) escribió:
> Jairo A. del Rio schrieb am 12.02.2021 um 19:50:
> > Hi, Ángel. Like this?
> >
> > \def\mylist{Fulano,Mengano,Sutano}
> >
> > \def\mycommand#1{#1\blank{\red Something here}\blank}
> >
> > \starttext
> >
> > \processcommacommand[\mylist]\mycommand
> >
> > \stoptext
> >
> > There are better ways to deal with data in ConTeXt, but it's basically
> > that way, I think.
>
>
> You can use the commalist environment:
>
> \starttext
>
> \startprocesscommalist[One,Two,Three,Four]
> Person Number \currentcommalistitem\par
> \stopprocesscommalist
>
> \blank
>
> \defineexpandable\NameList{One,Two,Three,Four}
>
> \startprocesscommacommand[\NameList]
> Person Number \currentcommalistitem\par
> \stopprocesscommacommand
>
> \stoptext
>
>
> Another way is to use the database module:
>
> \usemodule[database]
>
> \starttext
>
> \defineseparatedlist
> [namelist]
> [command=\NameEntry]
>
> \starttexdefinition unexpanded NameEntry #1
> Person Number #1\par
> \stoptexdefinition
>
> \startseparatedlist[namelist]
> One
> Two
> Three
> Four
> \stopseparatedlist
>
> \stoptext
>
>
> Wolfgang
>
[-- Attachment #1.2: Type: text/html, Size: 2034 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-12 18:50 ` Loop? Jairo A. del Rio
2021-02-12 18:52 ` Loop? Jairo A. del Rio
2021-02-12 19:25 ` Loop? Wolfgang Schuster
@ 2021-02-12 19:49 ` Angel M Alganza
2021-02-12 19:57 ` Loop? Jairo A. del Rio
2 siblings, 1 reply; 12+ messages in thread
From: Angel M Alganza @ 2021-02-12 19:49 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi Jairo:
On Fri, Feb 12, 2021 at 01:50:58PM -0500, Jairo A. del Rio wrote:
> Hi, Ángel. Like this?
> \def\mylist{Fulano,Mengano,Sutano}
> \def\mycommand#1{#1\blank{\red Something here}\blank}
> \starttext
> \processcommacommand[\mylist]\mycommand
> \stoptext
Yes, exactly like this, thank you. Now, I have the names writen like:
Family Name, Name
So, is it possible to use a list separatd by something else than a
comma? A semicolon, for example? To test I've replaced those commas by
a colon and it works fine, but I'd rather have a comma, if possible.
Again, thank you so much!
Cheers,
Ángel
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-12 19:49 ` Loop? Angel M Alganza
@ 2021-02-12 19:57 ` Jairo A. del Rio
0 siblings, 0 replies; 12+ messages in thread
From: Jairo A. del Rio @ 2021-02-12 19:57 UTC (permalink / raw)
To: Angel M Alganza, mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1567 bytes --]
There's \processseparatedlist[<list>][<separator>]\command with an
arbitrary <separator> other than a comma...
You should take a look at syst-aux.mkiv and syst-aux.mkxl to see more
helpers:
https://source.contextgarden.net/tex/context/base/mkiv/syst-aux.mkxl
El vie, 12 de feb. de 2021 a la(s) 14:49, Angel M Alganza (ama@ugr.es)
escribió:
> Hi Jairo:
>
> On Fri, Feb 12, 2021 at 01:50:58PM -0500, Jairo A. del Rio wrote:
>
> > Hi, Ángel. Like this?
>
> > \def\mylist{Fulano,Mengano,Sutano}
> > \def\mycommand#1{#1\blank{\red Something here}\blank}
> > \starttext
> > \processcommacommand[\mylist]\mycommand
> > \stoptext
>
> Yes, exactly like this, thank you. Now, I have the names writen like:
>
> Family Name, Name
>
> So, is it possible to use a list separatd by something else than a
> comma? A semicolon, for example? To test I've replaced those commas by
> a colon and it works fine, but I'd rather have a comma, if possible.
>
> Again, thank you so much!
>
> Cheers,
> Ángel
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
>
> ___________________________________________________________________________________
>
[-- Attachment #1.2: Type: text/html, Size: 2501 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-12 19:48 ` Loop? Jairo A. del Rio
@ 2021-02-13 10:42 ` Angel M Alganza
2021-02-13 11:12 ` Loop? Wolfgang Schuster
0 siblings, 1 reply; 12+ messages in thread
From: Angel M Alganza @ 2021-02-13 10:42 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Fri, Feb 12, 2021 at 02:48:23PM -0500, Jairo A. del Rio wrote:
> Oh, I knew about the environment form, but I didn't know about
> El vie, 12 de feb. de 2021 a la(s) 14:25, Wolfgang Schuster (
> wolfgang.schuster.lists@gmail.com) escribió:
>> You can use the commalist environment:
>> Another way is to use the database module:
Thank you so much, Jairo and Wolfgang.
All your solutions work fine!
I had been looking for info on loops and some other ideas for a few days
already. I never thought about "lists". :-)
Cheers,
Ángel
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-13 10:42 ` Loop? Angel M Alganza
@ 2021-02-13 11:12 ` Wolfgang Schuster
2021-02-13 13:23 ` Loop? Angel M Alganza
0 siblings, 1 reply; 12+ messages in thread
From: Wolfgang Schuster @ 2021-02-13 11:12 UTC (permalink / raw)
To: mailing list for ConTeXt users
Angel M Alganza schrieb am 13.02.2021 um 11:42:
> On Fri, Feb 12, 2021 at 02:48:23PM -0500, Jairo A. del Rio wrote:
>> Oh, I knew about the environment form, but I didn't know about
>
>> El vie, 12 de feb. de 2021 a la(s) 14:25, Wolfgang Schuster (
>> wolfgang.schuster.lists@gmail.com) escribió:
>
>>> You can use the commalist environment:
>
>>> Another way is to use the database module:
>
> Thank you so much, Jairo and Wolfgang.
> All your solutions work fine!
>
> I had been looking for info on loops and some other ideas for a few days
> already. I never thought about "lists". :-)
Below is another version.
Using the \startsetups block to set the content for the loop/list makes
it easier to strucuture (format) the text. With \recursestring you can
print the value of the current loop entry.
The list of entries for the loop can be moved from the argument itself
to a macro. To make adding and removing (can be done by commenting
entries with %) you can use the \starttexdefinition environment with
each name on a separate line.
%%%% begin example
\starttext
\startsetups [NameEntry]
Person Number \recursestring\par
\stopsetups
\doloopoverlist{One,Two,Three,Four}{\directsetup{NameEntry}}
\blank
%\defineexpandable\NameList
% {One,
% Two,
% Three,
% Four}
\starttexdefinition NameList
One,
Two,
Three,
Four
\stoptexdefinition
\doloopoverlist{\NameList}{\directsetup{NameEntry}}
\stoptext
%%%% end example
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-13 11:12 ` Loop? Wolfgang Schuster
@ 2021-02-13 13:23 ` Angel M Alganza
2021-02-13 13:39 ` Loop? Hans Hagen
0 siblings, 1 reply; 12+ messages in thread
From: Angel M Alganza @ 2021-02-13 13:23 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Sat, Feb 13, 2021 at 12:12:47PM +0100, Wolfgang Schuster wrote:
> Using the \startsetups block to set the content for the loop/list
> makes it easier to strucuture (format) the text. With \recursestring
> you can print the value of the current loop entry.
Very nice and easy to maintain the list of names.
Thank you so much!
Cheers,
Ángel
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Loop?
2021-02-13 13:23 ` Loop? Angel M Alganza
@ 2021-02-13 13:39 ` Hans Hagen
0 siblings, 0 replies; 12+ messages in thread
From: Hans Hagen @ 2021-02-13 13:39 UTC (permalink / raw)
To: Angel M Alganza, mailing list for ConTeXt users
On 2/13/2021 2:23 PM, Angel M Alganza wrote:
> On Sat, Feb 13, 2021 at 12:12:47PM +0100, Wolfgang Schuster wrote:
>
>> Using the \startsetups block to set the content for the loop/list
>> makes it easier to strucuture (format) the text. With \recursestring
>> you can print the value of the current loop entry.
>
> Very nice and easy to maintain the list of names.
You have to wikify all the answers ... here's another one:
\doloopovermatch {([^\letterpercent s,]+)} {aa, bb, cc, dd} {/#1/}
or more complex matching:
\doloopovermatch {(\letterpercent w+) *(\letterpercent w*)} {aa bb cc dd} {
[
\doloopovermatch{(\letterpercent w)(\letterpercent w)} {#1} {(##1 ##2)}
\doloopovermatch{(\letterpercent w)(\letterpercent w)} {#2} {(##1 ##2)}
]
}
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-02-13 13:39 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-12 18:39 Loop? Angel M Alganza
2021-02-12 18:50 ` Loop? Thomas A. Schmitz
2021-02-12 18:50 ` Loop? Jairo A. del Rio
2021-02-12 18:52 ` Loop? Jairo A. del Rio
2021-02-12 19:25 ` Loop? Wolfgang Schuster
2021-02-12 19:48 ` Loop? Jairo A. del Rio
2021-02-13 10:42 ` Loop? Angel M Alganza
2021-02-13 11:12 ` Loop? Wolfgang Schuster
2021-02-13 13:23 ` Loop? Angel M Alganza
2021-02-13 13:39 ` Loop? Hans Hagen
2021-02-12 19:49 ` Loop? Angel M Alganza
2021-02-12 19:57 ` Loop? Jairo A. del Rio
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).