[NTG-context] syntax highlighting: pandoc uses Kate

[NTG-context] syntax highlighting: pandoc uses Kate

[Henning Hraban Ramm]

Hi, since we recently discussed editor support and syntax highlighting:

Pandoc can use definitions from Kate[1] for syntax highlighting in a 
code block via "--syntax-definition".

There’s also ConTeXt support (MkIV/LMTX):

https://kate-editor.org/syntax/data/syntax/context.xml

Apparently, it can switch contexts to Lua, XML, MetaPost etc.
But the list of commands is quite short.

In case the author (Philipp A.) is listening: Is this intentional (“not 
necessary, highlight everything that starts with a backslash”)? 
Otherwise it probably would make sense to read in the interface files 
(i-*.xml).

I can’t tell if it would make sense to support this syntax via a module 
(like scite and vim). What we have if probably enough for most of us.

Hraban

[1]
List: https://kate-editor.org/syntax/
Specs: https://api.kde.org/frameworks/syntax-highlighting/html/
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive  : https://github.com/contextgarden/context
wiki     : https://wiki.contextgarden.net
___________________________________________________________________________________

[NTG-context] crossreferences

[Jürgen Hanneder via ntg-context]

I have a larger book, where crossreferences are made with  
\pagereference[label] and \at[label].
The problem is that references forward are resolved correctly,  
references backward result in ??.
My file is complicated, so I tried to produce a simplified minimal  
file and everything is correct.
If anyone has a solution, please let me know. Finding out the element  
that disturbs the references
may take some time.

Best
Jürgen



---

Prof. Dr. Juergen Hanneder
Philipps-Universitaet Marburg
FG Indologie u. Tibetologie
Deutschhausstr.12
35032 Marburg
Germany
Tel. 0049-6421-28-24930
hanneder@staff.uni-marburg.de

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive  : https://github.com/contextgarden/context
wiki     : https://wiki.contextgarden.net
___________________________________________________________________________________

[NTG-context] Re: crossreferences

[Mikael Sundqvist]

Hi,

I suggest that you divide the document and do it again and again until
the problem goes away. And then continue. It is close to impossible
for somebody else to have an idea without seeing any source at all...

/Mikael

On Thu, Sep 26, 2024 at 1:32 PM Jürgen Hanneder via ntg-context
<ntg-context@ntg.nl> wrote:
>
>
> I have a larger book, where crossreferences are made with
> \pagereference[label] and \at[label].
> The problem is that references forward are resolved correctly,
> references backward result in ??.
> My file is complicated, so I tried to produce a simplified minimal
> file and everything is correct.
> If anyone has a solution, please let me know. Finding out the element
> that disturbs the references
> may take some time.
>
> Best
> Jürgen
>
>
>
> ---
>
> Prof. Dr. Juergen Hanneder
> Philipps-Universitaet Marburg
> FG Indologie u. Tibetologie
> Deutschhausstr.12
> 35032 Marburg
> Germany
> Tel. 0049-6421-28-24930
> hanneder@staff.uni-marburg.de
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
> webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
> archive  : https://github.com/contextgarden/context
> wiki     : https://wiki.contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive  : https://github.com/contextgarden/context
wiki     : https://wiki.contextgarden.net
___________________________________________________________________________________

[NTG-context] Re: crossreferences

[Wolfgang Schuster]

Jürgen Hanneder via ntg-context schrieb am 26.09.2024 um 13:27:
> 
> I have a larger book, where crossreferences are made with 
> \pagereference[label] and \at[label].
> The problem is that references forward are resolved correctly, 
> references backward result in ??.
> My file is complicated, so I tried to produce a simplified minimal file 
> and everything is correct.
> If anyone has a solution, please let me know. Finding out the element 
> that disturbs the references
> may take some time.


There are not enough information to provide you with a useful solution 
but you can use debugging information for further inspection.

Put everything before \starttext of the following example to your 
document to find clues for the missing references.

%%%% begin example
\setupinteraction[state=start]

\enabletrackers[nodes.references.show,nodes.references]
\enabletrackers[nodes.destinations.show,nodes.destinations]

\enabletrackers[structures.referencing,structures.referencing.*]

\starttext

See \pagereference[one]reference two at \at{page}[two].

\page

See \pagereference[two]reference one at \at{page}[one].

\stoptext
%%%% end example

Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive  : https://github.com/contextgarden/context
wiki     : https://wiki.contextgarden.net
___________________________________________________________________________________

[NTG-context] Re: crossreferences

[Jürgen Hanneder via ntg-context]

> There are not enough information to provide you with a useful  
> solution but you can use debugging information for further inspection.
>
> Put everything before \starttext of the following example to your  
> document to find clues for the missing references.
>
> %%%% begin example
> \setupinteraction[state=start]
>
> \enabletrackers[nodes.references.show,nodes.references]
> \enabletrackers[nodes.destinations.show,nodes.destinations]
>
> \enabletrackers[structures.referencing,structures.referencing.*]
>
> \starttext
>
> See \pagereference[one]reference two at \at{page}[two].
>
> \page
>
> See \pagereference[two]reference one at \at{page}[one].
>
> \stoptext
> %%%% end example
>
> Wolfgang


Thanks for the hint and the code. While your example runs nicely, if I  
run 15 pages from
my book it produces log file entries not unlike in your example, but  
then crashes with the
errors given below.

Since apart from this the book works just fine, and I can always add  
the references by hand
in the end, there is no need to pursue this too long. I am sure I have  
messed up a few definitions
by copying from examples I did not fully understand.

Best
Jürgen

...
structures      > bookmark: The Text and its Critics
structure       > sectioning > section @ level 3 : 0.1.3 -> The Text  
and its Critics
references      > identifying > type '1a', reference 'internal(0)',  
index 1, prefix '', special 'internal', kind 'special operation'
references      > internal(0)={
  {
   ["kind"]="special operation",
   ["operation"]="0",
   ["reference"]="internal(0)",
   ["special"]="internal",
  },
  ["n"]=15,
  ["prefix"]="",
  ["reference"]="internal(0)",
}
backend         > references > resolving attribute 12
backend         > references > unable to resolve annotation 12
backend         > references > resolving attribute 13
backend         > references > unable to resolve annotation 13
backend         > destinations > resolving attribute 22
backend         > destinations > resolving attribute 21
backend         > destinations > resolving attribute 23
pages           > flushing realpage 16, userpage 16, subpage 16
tex memory      > bumping category 'input' succeeded, details:  
all=640000 | ini=-1 | max=100000 | mem=20000 | min=10000 | ptr=10001 |  
set=100000 | stp=10000 | top=10001
tex memory      > bumping category 'input' succeeded, details:  
all=960000 | ini=-1 | max=100000 | mem=30000 | min=10000 | ptr=20001 |  
set=100000 | stp=10000 | top=20001
tex memory      > bumping category 'input' succeeded, details:  
all=1280000 | ini=-1 | max=100000 | mem=40000 | min=10000 | ptr=30001  
| set=100000 | stp=10000 | top=30001
tex memory      > bumping category 'input' succeeded, details:  
all=1600000 | ini=-1 | max=100000 | mem=50000 | min=10000 | ptr=40001  
| set=100000 | stp=10000 | top=40001
tex memory      > bumping category 'input' succeeded, details:  
all=1920000 | ini=-1 | max=100000 | mem=60000 | min=10000 | ptr=50001  
| set=100000 | stp=10000 | top=50001
tex memory      > bumping category 'input' succeeded, details:  
all=2240000 | ini=-1 | max=100000 | mem=70000 | min=10000 | ptr=60001  
| set=100000 | stp=10000 | top=60001
tex memory      > bumping category 'input' succeeded, details:  
all=2560000 | ini=-1 | max=100000 | mem=80000 | min=10000 | ptr=70001  
| set=100000 | stp=10000 | top=70001
tex memory      > bumping category 'input' succeeded, details:  
all=2880000 | ini=-1 | max=100000 | mem=90000 | min=10000 | ptr=80001  
| set=100000 | stp=10000 | top=80001
tex memory      > bumping category 'token' succeeded, details:  
all=8000000 | ini=553139 | max=10000000 | mem=1000000 | min=1000000 |  
ptr=1272890 | set=10000000 | stp=250000 | top=1000000
tex memory      > bumping category 'input' succeeded, details:  
all=3200000 | ini=-1 | max=100000 | mem=100000 | min=10000 | ptr=90001  
| set=100000 | stp=10000 | top=90001
tex memory      > bumping category 'input' failed, details:  
all=3200000 | ini=-1 | max=100000 | mem=100000 | min=10000 |  
ptr=100001 | set=100000 | stp=10000 | top=100001
tex error       > tex error on line 452 in file Introduction.tex: TeX  
capacity exceeded, sorry [input=100000]



---

Prof. Dr. Juergen Hanneder
Philipps-Universitaet Marburg
FG Indologie u. Tibetologie
Deutschhausstr.12
35032 Marburg
Germany
Tel. 0049-6421-28-24930
hanneder@staff.uni-marburg.de

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive  : https://github.com/contextgarden/context
wiki     : https://wiki.contextgarden.net
___________________________________________________________________________________

[NTG-context] Re: crossreferences

[Wolfgang Schuster]

Jürgen Hanneder via ntg-context schrieb am 27.09.2024 um 15:10:
>> There are not enough information to provide you with a useful 
>> solution but you can use debugging information for further inspection.
>>
>> Put everything before \starttext of the following example to your 
>> document to find clues for the missing references.
>>
>> %%%% begin example
>> \setupinteraction[state=start]
>>
>> \enabletrackers[nodes.references.show,nodes.references]
>> \enabletrackers[nodes.destinations.show,nodes.destinations]
>>
>> \enabletrackers[structures.referencing,structures.referencing.*]

Comment the tracker above to get rid of the reference entries in the log 
file and try again.

>> \starttext
>>
>> See \pagereference[one]reference two at \at{page}[two].
>>
>> \page
>>
>> See \pagereference[two]reference one at \at{page}[one].
>>
>> \stoptext
>> %%%% end example
>>
>> Wolfgang
>
>
> Thanks for the hint and the code. While your example runs nicely, if I 
> run 15 pages from
> my book it produces log file entries not unlike in your example, but 
> then crashes with the
> errors given below.
>
> Since apart from this the book works just fine, and I can always add 
> the references by hand
> in the end, there is no need to pursue this too long. I am sure I have 
> messed up a few definitions
> by copying from examples I did not fully understand.

Can you show these definitions, maybe it's something obvious?

Wolfgang

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive  : https://github.com/contextgarden/context
wiki     : https://wiki.contextgarden.net
___________________________________________________________________________________

[NTG-context] Re: crossreferences

[Jürgen Hanneder via ntg-context]

>
> Can you show these definitions, maybe it's something obvious?

May well be, because I still do not understand too many details.
Here is the setup of the file:


\enableregime[utf]
\definepapersize[IeT][width=155mm, height=220mm]
\setuppapersize[IeT][IeT]
\setuplayout[width=fit,height=200mm,header=14pt,marking=on,backspace=13mm,topspace=15mm,headerdistance=4mm,bottomdistance=2pt,location=doublesided,setup=strict]
\setupheader[leftwidth=.8\hsize,rightwidth=.8\hsize,style=\tfx]
\setuppagenumbering[alternative=doublesided,location={header,right},sectionnumber=no,strut=yes,  
state=start]
\setupheadertexts[section][pagenumber][pagenumber][chapter]
\mainlanguage[en]

\setupbodyfontenvironment [default][em=italic]
\definefontfeature[default][default][fakecombining=yes,compose=yes,itlc=yes,protrusion=quality,expansion=quality,onum=yes]
\setupbodyfont[xcharter,10pt]

\setupalign[hz,hanging,tolerant]
\setupinterlinespace[line=2.72ex]
\clubpenalty=10000 \widowpenalty=10000
\setuptolerance[{horizontal, tolerant},{vertical, strict}]
\setupwhitespace[medium]
\setupindenting[yes,1.36em]

\setupnotation[footnote] [alternative=serried]
\setupnote[footnote][way=bypage,paragraph=yes,rule=on]
\definenote [variant] [footnote]
\setupnotation[variant][number=no]
\setupnote[variant][way=bypage,paragraph=yes,rule=off]

\setuphead	[title]		[style=\tfd\ss, page=yes, placehead=yes,  
align=right,color=darkgray]
\setuphead	[chapter]	[style=\tfb\bf,page=right,header=none,number=no]
\setuphead	[section]	[style=\tfa,header=none,number=no]
\setuphead	[subsection]	[style=\tf\it,header=none,number=no]

\definestartstop[verse][before={\blank\setuplines[indenting=always]\startalignment[right]\startlines},
			after={\stoplines\stopalignment\blank}]

\defineblank[ZitatDistance][5pt]
\definestartstop[Zitat][
    before={\blank[ZitatDistance]
       \setupnarrower[left=2pc,right=2pc]
       \startnarrower[left,right]
       \noindent},
    after={\stopnarrower
       \blank[ZitatDistance]
       \indenting[next]}]

\definestartstop[SmallZitat][
    before={\blank[ZitatDistance]
       \setupnarrower[left=2pc,right=2pc]
       \startnarrower[left,right]
       \noindent,style=\tfx\setupinterlinespace},
    after={\stopnarrower
       \blank[ZitatDistance]
       \indenting[next]}]

\setupitemize[packed]

\definedescription[Litverz][headstyle=normal, style=normal, align=flushleft,
   alternative=hanging, width=broad, margin=1cm, distance=1mm]

% %         SANSKRIT  VERSES
\definelines[sloka][][indenting={always, 0em},
   before=\setupnarrower[left=1cm,right=2pc]\startnarrower[left,right],
   after=\stopnarrower]

\definelines[smallsloka][][indenting={always,0em},
   before=\setupnarrower[left=1cm,right=2pc]\startnarrower[left,right],
   after=\stopnarrower]

\definedescription[patha][headstyle=normal, text={}, style=normal,  
align=flushleft,
   margin=1.3cm, style=\tfx\setupinterlinespace,before=\blank[-3mm]]

\def\lem{\kern0em{}]\enskip}
\setupexternalfigures[directory={images}]
\setupfloats[indentnext=no]

\setupheadtext[content=Contents]
\setuplist[chapter][style=\tfa\bf,pagestyle=bold,numberstyle=bold,alternative=a]
\setuplist[section][style=normal, alternative=d]
\setupcombinedlist[content][list={chapter,section}]

\definedescription[Biblio][alternative=serried, width=broad,  
distance=5mm, headstyle=bold]

  % \setupinteraction[state=start]
  % \enabletrackers[nodes.references.show,nodes.references]
  % \enabletrackers[nodes.destinations.show,nodes.destinations]
  % \enabletrackers[structures.referencing,structures.referencing.*]

\starttext






---

Prof. Dr. Juergen Hanneder
Philipps-Universitaet Marburg
FG Indologie u. Tibetologie
Deutschhausstr.12
35032 Marburg
Germany
Tel. 0049-6421-28-24930
hanneder@staff.uni-marburg.de

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive  : https://github.com/contextgarden/context
wiki     : https://wiki.contextgarden.net
___________________________________________________________________________________

[NTG-context] Re: crossreferences

[Wolfgang Schuster]

hanneder@staff.uni-marburg.de schrieb am 28.09.2024 um 08:39:
> 
>>
>> Can you show these definitions, maybe it's something obvious?
> 
> May well be, because I still do not understand too many details.
> Here is the setup of the file:

There is nothing in your setups which would lead to missing references 
which means the problem lies somewhere in your document itself.

> \enableregime[utf]

This can removed because UTF-8 is the default input encoding.

> \definepapersize[IeT][width=155mm, height=220mm]
> \setuppapersize[IeT][IeT]
> \setuplayout[width=fit,height=200mm,header=14pt,marking=on,backspace=13mm,topspace=15mm,headerdistance=4mm,bottomdistance=2pt,location=doublesided,setup=strict] 

1. Don't use "width=fit" unless you know what you're doing.

2. The location setting is only used when you use different page and 
paper sizes.

3. There is only a setups key but no setup and the argument *strict 
(which a * at the beginning)-

\setuplayout
   [backspace=13mm,
    width=119.3mm,
    topspace=15mm,
    header=14pt,
    headerdistance=4mm,
    height=200m,
    bottomdistance=2pt,
    setups=*strict]

> \setupheader[leftwidth=.8\hsize,rightwidth=.8\hsize,style=\tfx]
> \setuppagenumbering[alternative=doublesided,location={header,right},sectionnumber=no,strut=yes, 
> state=start]

1. There is no sectionnumber setting.

2. The strut and state settings have these values by default.

\setuppagenumbering
   [alternative=doublesided,
    location={header,right}]

> \setupheadertexts[section][pagenumber][pagenumber][chapter]
> \mainlanguage[en]

Not necessary because english is the default language.

> \setupbodyfontenvironment [default][em=italic]

Not necessary for charter because there is only a italic style, you need 
this only for fonts which have an italic and slanted style at the same time.

> \definefontfeature[default][default][fakecombining=yes,compose=yes,itlc=yes,protrusion=quality,expansion=quality,onum=yes] 
> 
> \setupbodyfont[xcharter,10pt]
> 
> \setupalign[hz,hanging,tolerant]
> \setupinterlinespace[line=2.72ex]
> \clubpenalty=10000 \widowpenalty=10000

You can remove the \clubpenalty and \widowpenalty settings when you 
apply the *strict (which sets both penalties) value with \setuplayout in 
the correct way (see above).

> \setuptolerance[{horizontal, tolerant},{vertical, strict}]

Not possible in this way, you have to set the horizontal and vertical 
value one by one.

\setuptolerance[horizontal,tolerant]
\setuptolerance[vertical,strict]

The horizontal setting can be even left out because you alredy set the 
value with \setupalign.

> \setupwhitespace[medium]
> \setupindenting[yes,1.36em]
> 
> \setupnotation[footnote] [alternative=serried]
> \setupnote[footnote][way=bypage,paragraph=yes,rule=on]
> \definenote [variant] [footnote]
> \setupnotation[variant][number=no]
> \setupnote[variant][way=bypage,paragraph=yes,rule=off]
> 
> \setuphead    [title]        [style=\tfd\ss, page=yes, placehead=yes, 
> align=right,color=darkgray]

No need for placehead=yes because this is a default value.

> \setuphead    [chapter]    [style=\tfb\bf,page=right,header=none,number=no]
> \setuphead    [section]    [style=\tfa,header=none,number=no]
> \setuphead    [subsection]    [style=\tf\it,header=none,number=no]

You can leave "header=none" out for section and subsection because none 
of them start a new page.

Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage  : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive  : https://github.com/contextgarden/context
wiki     : https://wiki.contextgarden.net
___________________________________________________________________________________