* t-vim module: math in "normal" code and background color
@ 2017-07-17 19:13 Gerion Entrup
2017-07-17 21:17 ` Henri Menke
2017-07-18 2:04 ` Aditya Mahajan
0 siblings, 2 replies; 9+ messages in thread
From: Gerion Entrup @ 2017-07-17 19:13 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi,
I have two questions with the vim module.
1. I want to use the math mode inside the code. I've seen the escape option,
e.g. here [1], but this seems to work only with comments. Is there a
possibility to use it directly in the code, too?
Minimal example:
```
\usemodule[vim]
\definevimtyping[python][syntax=python, escape=on]
\starttext
\startpython
# Returns \m{\sum_{i=1}^{n}i}
def sum_upto(\m{n \in \mathbb{N}})
r = range(1, \m{n} + 1)
return sum(r)
\stoppython
\stoptext
```
2. It would be cool, if I can define some background color for the code.
Unfortunately I'm very new to context and haven't seen a direct option. I
assume this is possible with some kind of extra environment around the code?
(I've subscribed the list, so you don't have to CC me.)
Thank you in advance,
Gerion
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: t-vim module: math in "normal" code and background color 2017-07-17 19:13 t-vim module: math in "normal" code and background color Gerion Entrup @ 2017-07-17 21:17 ` Henri Menke 2017-07-18 2:04 ` Aditya Mahajan 1 sibling, 0 replies; 9+ messages in thread From: Henri Menke @ 2017-07-17 21:17 UTC (permalink / raw) To: ntg-context On Mon, 2017-07-17 at 21:13 +0200, Gerion Entrup wrote: > Hi, > > I have two questions with the vim module. > > 1. I want to use the math mode inside the code. I've seen the escape option, > e.g. here [1], but this seems to work only with comments. Is there a > possibility to use it directly in the code, too? > > Minimal example: > ``` > \usemodule[vim] > \definevimtyping[python][syntax=python, escape=on] > > \starttext > \startpython > # Returns \m{\sum_{i=1}^{n}i} > def sum_upto(\m{n \in \mathbb{N}}) > r = range(1, \m{n} + 1) > return sum(r) > \stoppython > \stoptext > ``` > > 2. It would be cool, if I can define some background color for the code. > Unfortunately I'm very new to context and haven't seen a direct option. I > assume this is possible with some kind of extra environment around the code? Background is no problem, escape in code is not implemented in t-vim. I filed a feature request for /BTEX ... /ETEX escaping as in regular typing on Aditya's GitHub: https://github.com/adityam/filter/ issues/23 \definetextbackground [verbatim] [location=paragraph] \usemodule[vim] \definevimtyping [python] [syntax=python, escape=on, before={\starttextbackground[verbatim]}, after={\stoptextbackground}] \setuptyping [before={\starttextbackground[verbatim]}, after={\stoptextbackground}] \starttext \starttyping[escape=yes] # Returns /BTEX\m{\sum_{i=1}^{n}i}/ETEX def sum_upto(/BTEX\m{n \in \mathbb{N}}/ETEX) r = range(1, \m{n} + 1) return sum(r) \stoptyping \startpython # Returns \m{\sum_{i=1}^{n}i} def sum_upto(\m{n \in \mathbb{N}}w) r = range(1, \m{n} + 1) return sum(r) \stoppython \stoptext > (I've subscribed the list, so you don't have to CC me.) > > Thank you in advance, > Gerion > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: t-vim module: math in "normal" code and background color 2017-07-17 19:13 t-vim module: math in "normal" code and background color Gerion Entrup 2017-07-17 21:17 ` Henri Menke @ 2017-07-18 2:04 ` Aditya Mahajan 2017-07-18 22:30 ` Gerion Entrup 1 sibling, 1 reply; 9+ messages in thread From: Aditya Mahajan @ 2017-07-18 2:04 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, 17 Jul 2017, Gerion Entrup wrote: > Hi, > > I have two questions with the vim module. > > 1. I want to use the math mode inside the code. I've seen the escape option, > e.g. here [1], but this seems to work only with comments. Is there a > possibility to use it directly in the code, too? Short answer. No. Long answer. t-vim relies on vim to syntax highlight the code. Since the code is not valid python, the default python syntax highlighting will not work. In principle, it is possible to write a vim syntax highlighting script for a derivative of python where math terms are allowed, but that requires a lot of work for each language. The whole point of t-vim module was that I am lazy and don't want to write the parser for each language :-) > Minimal example: > ``` > \usemodule[vim] > \definevimtyping[python][syntax=python, escape=on] > > \starttext > \startpython > # Returns \m{\sum_{i=1}^{n}i} > def sum_upto(\m{n \in \mathbb{N}}) > r = range(1, \m{n} + 1) > return sum(r) > \stoppython > \stoptext > ``` Another option will be to use the algorithmic module: https://bitbucket.org/wolfs/algorithmic/src/ > 2. It would be cool, if I can define some background color for the code. > Unfortunately I'm very new to context and haven't seen a direct option. I > assume this is possible with some kind of extra environment around the code? You can add \setupbackground[background=color, backgroundcolor=gray] \setupvimtyping[python] [ before={\startbackground}, after={\stopbackground}, ] or, instead of modifying the default background, define a new background and use that. Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: t-vim module: math in "normal" code and background color 2017-07-18 2:04 ` Aditya Mahajan @ 2017-07-18 22:30 ` Gerion Entrup 2017-07-19 19:07 ` Aditya Mahajan 0 siblings, 1 reply; 9+ messages in thread From: Gerion Entrup @ 2017-07-18 22:30 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1: Type: text/plain, Size: 3269 bytes --] Am Dienstag, 18. Juli 2017, 04:04:51 CEST schrieb Aditya Mahajan: > On Mon, 17 Jul 2017, Gerion Entrup wrote: > > > Hi, > > > > I have two questions with the vim module. > > > > 1. I want to use the math mode inside the code. I've seen the escape option, > > e.g. here [1], but this seems to work only with comments. Is there a > > possibility to use it directly in the code, too? > > Short answer. No. > > Long answer. t-vim relies on vim to syntax highlight the code. Since the > code is not valid python, the default python syntax highlighting will not > work. In principle, it is possible to write a vim syntax highlighting > script for a derivative of python where math terms are allowed, but that > requires a lot of work for each language. The whole point of t-vim module > was that I am lazy and don't want to write the parser for each language > :-) I've invested some time and rewrote parts of the vimscript file of t-vim. Now one or more escapechars can be defined, that helps vim to not interpret the text: ``` \usemodule[vim] \definevimtyping[python][syntax=python] \definevimtyping[cpp][syntax=cpp] \starttext \startpython # Returns range(°\m{\sum_{i=1}^{n}i \in F \int_i f}° def sum_upto(°\m{n \in \mathbb{N} \sum_{i=1}}°) r = range(1, °\m{n}° + °\m{\sum_{i=1} 1}°) return sum(r) \stoppython \startcpp foobar(°\m{q_0}°); \stopcpp \stoptext ``` I'm not familiar enough with TeX or ConTeXt to get the TeX part to work, so the escapechar '°' is hardcoded at the moment. If you like the patch, this has to be fixed. Another problem, as you see in the above example, is, that vim interprets the second ')' in the startcpp section as color code "Error", so the whole part is colorized. This can be circumventented with the escapechars '°"', but I have no idea how to teach tex/lua to not interpret the '"'. Simply writing -c "let escapechar='°\"'" % etc. in the t-vim.tex does not work. Another point I saw is, that highlight together with TeX-code is not really usable: ``` \usemodule[vim] \definevimtyping[python][syntax=python, escape=on] \starttext \startpython[highlight=1] # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} \stoppython \stoptext ``` > > Minimal example: > > ``` > > \usemodule[vim] > > \definevimtyping[python][syntax=python, escape=on] > > > > \starttext > > \startpython > > # Returns \m{\sum_{i=1}^{n}i} > > def sum_upto(\m{n \in \mathbb{N}}) > > r = range(1, \m{n} + 1) > > return sum(r) > > \stoppython > > \stoptext > > ``` > > Another option will be to use the algorithmic module: https://bitbucket.org/wolfs/algorithmic/src/ > > > 2. It would be cool, if I can define some background color for the code. > > Unfortunately I'm very new to context and haven't seen a direct option. I > > assume this is possible with some kind of extra environment around the code? > > You can add > > \setupbackground[background=color, backgroundcolor=gray] > > \setupvimtyping[python] > [ > before={\startbackground}, > after={\stopbackground}, > ] > > or, instead of modifying the default background, define a new background > and use that. OK, thank you. Gerion [-- Attachment #2: 0001-t-vim-extended-escape-mode.patch --] [-- Type: text/x-patch, Size: 5310 bytes --] From 994de513a23210f1f4d50d24270f8f988abdd21c Mon Sep 17 00:00:00 2001 From: Gerion Entrup <gerion.entrup@flump.de> Date: Wed, 19 Jul 2017 00:13:52 +0200 Subject: [PATCH] t-vim: extended escape mode With this change it is possible to define one or more escapechars, that are used by vim to recognize parts that should not be interpreted. --- 2context.vim | 50 +++++++++++++++++++++++++++++++++----------------- t-vim.tex | 12 ++---------- 2 files changed, 35 insertions(+), 27 deletions(-) diff --git a/2context.vim b/2context.vim index 9c72ba1..b208e65 100644 --- a/2context.vim +++ b/2context.vim @@ -8,6 +8,11 @@ " output buffer. The script parses content line-by-line from the first buffer " and pastes the modified result on the second buffer. +" Compare a char of <string> at <bytepos> with some Unicode <ochar> +function UnicodeCompare(string, bytepos, ochar) + return strpart(a:string, a:bytepos, max([strlen(a:ochar), 1])) ==# a:ochar +endfunction + " Split screen and go to the second buffer, ensure modifiable is set, and the " buffer is empty. sblast @@ -38,9 +43,9 @@ if !exists("highlight") let highlight=[] endif -" Set escapecomments -if !exists("escapecomments") - let escapecomments=0 +" Set escapechar +if !exists("escapechar") + let escapechar='' endif let s:strip = strlen( matchstr( getline(s:lstart), '^\s*' ) ) @@ -71,37 +76,48 @@ let s:lines = [] let s:buffer_lnum = 1 let s:lnum = s:lstart +let s:lenesc = strlen(escapechar) + while s:lnum <= s:lstop " Get the current line let s:line = getline(s:lnum) let s:len = strlen(s:line) - let s:new = '' + let s:new = '' " Loop over each character in the line - let s:col = s:strip + 1 - while s:col <= s:len + let s:col = s:strip + while s:col < s:len let s:startcol = s:col " The start column for processing text - let s:id = synID (s:lnum, s:col, 1) - let s:col = s:col + 1 + let s:temp = '' +" ignore escaped sequences + if UnicodeCompare(s:line, s:col, escapechar) + let s:nextesc = stridx(s:line, escapechar, s:col + 1) + let s:temp = strpart(s:line, s:col + s:lenesc, s:nextesc - s:col - s:lenesc) + let s:col = s:nextesc + s:lenesc + let s:startcol = s:col + endif + if s:col > s:len + let s:id = 0 " dummy id if whole line is escaped + else + let s:id = synID (s:lnum, s:col + 1, 1) + let s:col = s:col + 1 " Speed loop (it's small - that's the trick) -" Go along till we find a change in synID - while s:col <= s:len && s:id == synID(s:lnum, s:col, 1) - let s:col = s:col + 1 - endwhile +" Go along till we find a change in synID or an escapechar + while s:col < s:len && !UnicodeCompare(s:line, s:col, escapechar) && s:id == synID(s:lnum, s:col + 1, 1) + let s:col = s:col + 1 + endwhile + endif " Output the text with the same synID, with class set to {s:id_name} let s:id = synIDtrans (s:id) let s:id_name = synIDattr (s:id, "name", "gui") - let s:temp = strpart(s:line, s:startcol - 1, s:col - s:startcol) + let s:part = strpart(s:line, s:startcol, s:col - s:startcol) + let s:temp = s:temp . escape( s:part, '\{}') " Remove line endings (on unix machines reading windows files) let s:temp = substitute(s:temp, '\r*$', '', '') " It might have happened that that one has been the last item in a row, so " we don't need to print in in that case if strlen(s:temp) > 0 -" Change special TeX characters to escape sequences. - if !(escapecomments && s:id_name == "Comment") - let s:temp = escape( s:temp, '\{}') - endif if !empty(s:id_name) let s:temp = '\SYN[' . s:id_name . ']{' . s:temp . '}' endif diff --git a/t-vim.tex b/t-vim.tex index 542261f..9d0bb50 100644 --- a/t-vim.tex +++ b/t-vim.tex @@ -129,7 +129,7 @@ -c "let contextstartline=\externalfilterparameter\c!start \letterbar\space % let contextstopline=\externalfilterparameter\c!stop \letterbar\space % let strip=\getvalue{\vimtyping@id-\c!strip-\externalfilterparameter\c!strip}" % - -c "let escapecomments=\getvalue{\vimtyping@id-\c!escape-\externalfilterparameter\c!escape}" % + -c "let escapechar='°'" % -c "let highlight=[\externalfilterparameter\c!highlight]" % \vimrc_extras\space -c "source \vimtyping@script_name" % @@ -140,18 +140,10 @@ \setvalue{\vimtyping@id-\c!strip-\v!off}{0} \setvalue{\vimtyping@id-\c!strip-\v!on}{1} -\setvalue{\vimtyping@id-\c!escape-\v!off}{0} -\setvalue{\vimtyping@id-\c!escape-\v!on}{1} - - % Undocumented ... but useful if the user makes a mistake \setvalue{\vimtyping@id-\c!strip-\v!no}{0} \setvalue{\vimtyping@id-\c!strip-\v!yes}{1} -\setvalue{\vimtyping@id-\c!escape-\v!no}{0} -\setvalue{\vimtyping@id-\c!escape-\v!yes}{1} - - \setupvimtyping [% \c!tab=4, % \c!start=1, @@ -163,7 +155,7 @@ % \c!style=\tttf, % \c!color=, \c!strip=\v!off, - \c!escape=\v!off, + % \c!escapechar=, % \c!highlight=, % \c!highlightcolor=lightgray, \c!filtercommand=\vimtyping@filter_command, -- 2.13.0 [-- Attachment #3: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: t-vim module: math in "normal" code and background color 2017-07-18 22:30 ` Gerion Entrup @ 2017-07-19 19:07 ` Aditya Mahajan 2017-07-19 19:45 ` Gerion Entrup 2017-07-19 20:39 ` Henri Menke 0 siblings, 2 replies; 9+ messages in thread From: Aditya Mahajan @ 2017-07-19 19:07 UTC (permalink / raw) To: mailing list for ConTeXt users On Wed, 19 Jul 2017, Gerion Entrup wrote: > Am Dienstag, 18. Juli 2017, 04:04:51 CEST schrieb Aditya Mahajan: >> On Mon, 17 Jul 2017, Gerion Entrup wrote: >> >>> Hi, >>> >>> I have two questions with the vim module. >>> >>> 1. I want to use the math mode inside the code. I've seen the escape option, >>> e.g. here [1], but this seems to work only with comments. Is there a >>> possibility to use it directly in the code, too? >> >> Short answer. No. >> >> Long answer. t-vim relies on vim to syntax highlight the code. Since the >> code is not valid python, the default python syntax highlighting will not >> work. In principle, it is possible to write a vim syntax highlighting >> script for a derivative of python where math terms are allowed, but that >> requires a lot of work for each language. The whole point of t-vim module >> was that I am lazy and don't want to write the parser for each language >> :-) > > I've invested some time and rewrote parts of the vimscript file of t-vim. > Now one or more escapechars can be defined, that helps vim to not interpret > the text: I'll look at this later.... > Another point I saw is, that highlight together with TeX-code is not really usable: > ``` > \usemodule[vim] > \definevimtyping[python][syntax=python, escape=on] > > \starttext > \startpython[highlight=1] > # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} > \stoppython > \stoptext > ``` By default, the highlighting is done using the bars mechanism. It works for simple cases but fails with math mode (the spaces are not covered). One option is to highlight using the textbackground mechanism: \definetextbackground[texthighlight] [ background=color, backgroundcolor=gray, frame=off, ] \define[1]\texthighlight{\starttexthighlight#1\stoptexthighlight} \usemodule[vim] \definevimtyping[python][syntax=python, escape=on, highlightcommand=\texthighlight] \starttext \startpython[highlight=3] for x in 1:n print(x) # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} for x in 1:n print(x) \stoppython \stoptext The spacing in math mode is bad. What is happening is the following. To make sure that spaces are obeyed in the code listing, I set (a modified version of) \activatespacehandler{on}, so the output that you get is the following: {\obeyspaces \def\obeyedspace{\hskip\interwordspace\relax} \m{\sum_{i=1}^{n}i \in F \int_i f}} The simplest way to fix this is to define a new command: \define[1]\MATH{\bgroup\activatespacehandler{off}\m{\rescan{#1}}\egroup} and use \MATH{....} instead of \m{....}. I'll test this is a bit, and if the solution is robust, then I will map \m{...} to something equivalent to the above in the t-vim environments. Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: t-vim module: math in "normal" code and background color 2017-07-19 19:07 ` Aditya Mahajan @ 2017-07-19 19:45 ` Gerion Entrup 2017-07-20 0:06 ` Aditya Mahajan 2017-07-19 20:39 ` Henri Menke 1 sibling, 1 reply; 9+ messages in thread From: Gerion Entrup @ 2017-07-19 19:45 UTC (permalink / raw) To: mailing list for ConTeXt users Am Mittwoch, 19. Juli 2017, 21:07:09 CEST schrieb Aditya Mahajan: > On Wed, 19 Jul 2017, Gerion Entrup wrote: > > > Am Dienstag, 18. Juli 2017, 04:04:51 CEST schrieb Aditya Mahajan: > >> On Mon, 17 Jul 2017, Gerion Entrup wrote: > >> > >>> Hi, > >>> > >>> I have two questions with the vim module. > >>> > >>> 1. I want to use the math mode inside the code. I've seen the escape option, > >>> e.g. here [1], but this seems to work only with comments. Is there a > >>> possibility to use it directly in the code, too? > >> > >> Short answer. No. > >> > >> Long answer. t-vim relies on vim to syntax highlight the code. Since the > >> code is not valid python, the default python syntax highlighting will not > >> work. In principle, it is possible to write a vim syntax highlighting > >> script for a derivative of python where math terms are allowed, but that > >> requires a lot of work for each language. The whole point of t-vim module > >> was that I am lazy and don't want to write the parser for each language > >> :-) > > > > I've invested some time and rewrote parts of the vimscript file of t-vim. > > Now one or more escapechars can be defined, that helps vim to not interpret > > the text: > > I'll look at this later.... > > > Another point I saw is, that highlight together with TeX-code is not really usable: > > ``` > > \usemodule[vim] > > \definevimtyping[python][syntax=python, escape=on] > > > > \starttext > > \startpython[highlight=1] > > # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} > > \stoppython > > \stoptext > > ``` > > By default, the highlighting is done using the bars mechanism. It works > for simple cases but fails with math mode (the spaces are not covered). > One option is to highlight using the textbackground mechanism: > > \definetextbackground[texthighlight] > [ > background=color, > backgroundcolor=gray, > frame=off, > ] > > \define[1]\texthighlight{\starttexthighlight#1\stoptexthighlight} > > \usemodule[vim] > \definevimtyping[python][syntax=python, escape=on, highlightcommand=\texthighlight] > > \starttext > > \startpython[highlight=3] > for x in 1:n > print(x) > # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} > for x in 1:n > print(x) > \stoppython > \stoptext Thank you, this works much better (critic on high level: the sum symbol is higher than the highlight box, relevant on fractions). > The spacing in math mode is bad. What is happening is the following. To > make sure that spaces are obeyed in the code listing, I set (a modified > version of) \activatespacehandler{on}, so the output that you get is the > following: > > {\obeyspaces > \def\obeyedspace{\hskip\interwordspace\relax} > \m{\sum_{i=1}^{n}i \in F \int_i f}} > > The simplest way to fix this is to define a new command: > > \define[1]\MATH{\bgroup\activatespacehandler{off}\m{\rescan{#1}}\egroup} > > and use \MATH{....} instead of \m{....}. > > I'll test this is a bit, and if the solution is robust, then I will map > \m{...} to something equivalent to the above in the t-vim environments. I saw the strange spacing. Thank you very much to provide a solution. Gerion ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: t-vim module: math in "normal" code and background color 2017-07-19 19:45 ` Gerion Entrup @ 2017-07-20 0:06 ` Aditya Mahajan 0 siblings, 0 replies; 9+ messages in thread From: Aditya Mahajan @ 2017-07-20 0:06 UTC (permalink / raw) To: mailing list for ConTeXt users On Wed, 19 Jul 2017, Gerion Entrup wrote: > Am Mittwoch, 19. Juli 2017, 21:07:09 CEST schrieb Aditya Mahajan: >> On Wed, 19 Jul 2017, Gerion Entrup wrote: >> >> > Am Dienstag, 18. Juli 2017, 04:04:51 CEST schrieb Aditya Mahajan: >> >> On Mon, 17 Jul 2017, Gerion Entrup wrote: >> >> >> >>> Hi, >> >>> >> >>> I have two questions with the vim module. >> >>> >> >>> 1. I want to use the math mode inside the code. I've seen the escape option, >> >>> e.g. here [1], but this seems to work only with comments. Is there a >> >>> possibility to use it directly in the code, too? >> >> >> >> Short answer. No. >> >> >> >> Long answer. t-vim relies on vim to syntax highlight the code. Since the >> >> code is not valid python, the default python syntax highlighting will not >> >> work. In principle, it is possible to write a vim syntax highlighting >> >> script for a derivative of python where math terms are allowed, but that >> >> requires a lot of work for each language. The whole point of t-vim module >> >> was that I am lazy and don't want to write the parser for each language >> >> :-) >> > >> > I've invested some time and rewrote parts of the vimscript file of t-vim. >> > Now one or more escapechars can be defined, that helps vim to not interpret >> > the text: >> >> I'll look at this later.... >> >> > Another point I saw is, that highlight together with TeX-code is not really usable: >> > ``` >> > \usemodule[vim] >> > \definevimtyping[python][syntax=python, escape=on] >> > >> > \starttext >> > \startpython[highlight=1] >> > # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} >> > \stoppython >> > \stoptext >> > ``` >> >> By default, the highlighting is done using the bars mechanism. It works >> for simple cases but fails with math mode (the spaces are not covered). >> One option is to highlight using the textbackground mechanism: >> >> \definetextbackground[texthighlight] >> [ >> background=color, >> backgroundcolor=gray, >> frame=off, >> ] >> >> \define[1]\texthighlight{\starttexthighlight#1\stoptexthighlight} >> >> \usemodule[vim] >> \definevimtyping[python][syntax=python, escape=on, highlightcommand=\texthighlight] >> >> \starttext >> >> \startpython[highlight=3] >> for x in 1:n >> print(x) >> # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} >> for x in 1:n >> print(x) >> \stoppython >> \stoptext > Thank you, this works much better (critic on high level: the sum symbol is > higher than the highlight box, relevant on fractions). Another option (slightly better visually, but increases the interline distance) \defineframed[texthighlight] [ background=color, backgroundcolor=gray, frame=off, location=middle, ] \usemodule[vim] \definevimtyping[python][syntax=python, escape=on, highlightcommand=\dontleavehmode\texthighlight] \starttext \startpython[highlight=3] for x in 1:n print(x) # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} for x in 1:n print(x) \stoppython \stoptext Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: t-vim module: math in "normal" code and background color 2017-07-19 19:07 ` Aditya Mahajan 2017-07-19 19:45 ` Gerion Entrup @ 2017-07-19 20:39 ` Henri Menke 2017-07-19 23:56 ` Aditya Mahajan 1 sibling, 1 reply; 9+ messages in thread From: Henri Menke @ 2017-07-19 20:39 UTC (permalink / raw) To: ntg-context On Wed, 2017-07-19 at 15:07 -0400, Aditya Mahajan wrote: > On Wed, 19 Jul 2017, Gerion Entrup wrote: > > > > > Am Dienstag, 18. Juli 2017, 04:04:51 CEST schrieb Aditya Mahajan: > > > > > > On Mon, 17 Jul 2017, Gerion Entrup wrote: > > > > > > > > > > > Hi, > > > > > > > > I have two questions with the vim module. > > > > > > > > 1. I want to use the math mode inside the code. I've seen the escape option, > > > > e.g. here [1], but this seems to work only with comments. Is there a > > > > possibility to use it directly in the code, too? > > > Short answer. No. > > > > > > Long answer. t-vim relies on vim to syntax highlight the code. Since the > > > code is not valid python, the default python syntax highlighting will not > > > work. In principle, it is possible to write a vim syntax highlighting > > > script for a derivative of python where math terms are allowed, but that > > > requires a lot of work for each language. The whole point of t-vim module > > > was that I am lazy and don't want to write the parser for each language > > > :-) > > I've invested some time and rewrote parts of the vimscript file of t-vim. > > Now one or more escapechars can be defined, that helps vim to not interpret > > the text: > I'll look at this later.... > > > > > Another point I saw is, that highlight together with TeX-code is not really usable: > > ``` > > \usemodule[vim] > > \definevimtyping[python][syntax=python, escape=on] > > > > \starttext > > \startpython[highlight=1] > > # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} > > \stoppython > > \stoptext > > ``` > By default, the highlighting is done using the bars mechanism. It works > for simple cases but fails with math mode (the spaces are not covered). > One option is to highlight using the textbackground mechanism: > > \definetextbackground[texthighlight] > [ > background=color, > backgroundcolor=gray, > frame=off, > ] > > \define[1]\texthighlight{\starttexthighlight#1\stoptexthighlight} > > \usemodule[vim] > \definevimtyping[python][syntax=python, escape=on, highlightcommand=\texthighlight] > > \starttext > > \startpython[highlight=3] > for x in 1:n > print(x) > # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} > for x in 1:n > print(x) > \stoppython > \stoptext > > The spacing in math mode is bad. What is happening is the following. To > make sure that spaces are obeyed in the code listing, I set (a modified > version of) \activatespacehandler{on}, so the output that you get is the > following: > > {\obeyspaces > \def\obeyedspace{\hskip\interwordspace\relax} > \m{\sum_{i=1}^{n}i \in F \int_i f}} > > The simplest way to fix this is to define a new command: > > \define[1]\MATH{\bgroup\activatespacehandler{off}\m{\rescan{#1}}\egroup} Why not just this? \def\obeyedspace{\ifmmode\else\hskip\interwordspace\relax\fi} > > and use \MATH{....} instead of \m{....}. > > I'll test this is a bit, and if the solution is robust, then I will map > \m{...} to something equivalent to the above in the t-vim environments. > > > Aditya > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: t-vim module: math in "normal" code and background color 2017-07-19 20:39 ` Henri Menke @ 2017-07-19 23:56 ` Aditya Mahajan 0 siblings, 0 replies; 9+ messages in thread From: Aditya Mahajan @ 2017-07-19 23:56 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1: Type: text/plain, Size: 3208 bytes --] On Thu, 20 Jul 2017, Henri Menke wrote: > On Wed, 2017-07-19 at 15:07 -0400, Aditya Mahajan wrote: >> On Wed, 19 Jul 2017, Gerion Entrup wrote: >> >> > >> > Am Dienstag, 18. Juli 2017, 04:04:51 CEST schrieb Aditya Mahajan: >> > > >> > > On Mon, 17 Jul 2017, Gerion Entrup wrote: >> > > >> > > > >> > > > Hi, >> > > > >> > > > I have two questions with the vim module. >> > > > >> > > > 1. I want to use the math mode inside the code. I've seen the escape option, >> > > > e.g. here [1], but this seems to work only with comments. Is there a >> > > > possibility to use it directly in the code, too? >> > > Short answer. No. >> > > >> > > Long answer. t-vim relies on vim to syntax highlight the code. Since the >> > > code is not valid python, the default python syntax highlighting will not >> > > work. In principle, it is possible to write a vim syntax highlighting >> > > script for a derivative of python where math terms are allowed, but that >> > > requires a lot of work for each language. The whole point of t-vim module >> > > was that I am lazy and don't want to write the parser for each language >> > > :-) >> > I've invested some time and rewrote parts of the vimscript file of t-vim. >> > Now one or more escapechars can be defined, that helps vim to not interpret >> > the text: >> I'll look at this later.... >> >> > >> > Another point I saw is, that highlight together with TeX-code is not really usable: >> > ``` >> > \usemodule[vim] >> > \definevimtyping[python][syntax=python, escape=on] >> > >> > \starttext >> > \startpython[highlight=1] >> > # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} >> > \stoppython >> > \stoptext >> > ``` >> By default, the highlighting is done using the bars mechanism. It works >> for simple cases but fails with math mode (the spaces are not covered). >> One option is to highlight using the textbackground mechanism: >> >> \definetextbackground[texthighlight] >> [ >> background=color, >> backgroundcolor=gray, >> frame=off, >> ] >> >> \define[1]\texthighlight{\starttexthighlight#1\stoptexthighlight} >> >> \usemodule[vim] >> \definevimtyping[python][syntax=python, escape=on, highlightcommand=\texthighlight] >> >> \starttext >> >> \startpython[highlight=3] >> for x in 1:n >> print(x) >> # Returns \m{\sum_{i=1}^{n}i \in F \int_i f} >> for x in 1:n >> print(x) >> \stoppython >> \stoptext >> >> The spacing in math mode is bad. What is happening is the following. To >> make sure that spaces are obeyed in the code listing, I set (a modified >> version of) \activatespacehandler{on}, so the output that you get is the >> following: >> >> {\obeyspaces >> \def\obeyedspace{\hskip\interwordspace\relax} >> \m{\sum_{i=1}^{n}i \in F \int_i f}} >> >> The simplest way to fix this is to define a new command: >> >> \define[1]\MATH{\bgroup\activatespacehandler{off}\m{\rescan{#1}}\egroup} > > Why not just this? > > \def\obeyedspace{\ifmmode\else\hskip\interwordspace\relax\fi} That's a good suggestion and will be easier to incorporate in t-vim. Thanks, Aditya [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-07-20 0:06 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-07-17 19:13 t-vim module: math in "normal" code and background color Gerion Entrup 2017-07-17 21:17 ` Henri Menke 2017-07-18 2:04 ` Aditya Mahajan 2017-07-18 22:30 ` Gerion Entrup 2017-07-19 19:07 ` Aditya Mahajan 2017-07-19 19:45 ` Gerion Entrup 2017-07-20 0:06 ` Aditya Mahajan 2017-07-19 20:39 ` Henri Menke 2017-07-19 23:56 ` Aditya Mahajan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).