* placefigure @ 2006-07-20 15:33 Hans van der Meer 2006-07-21 7:35 ` placefigure Taco Hoekwater 0 siblings, 1 reply; 29+ messages in thread From: Hans van der Meer @ 2006-07-20 15:33 UTC (permalink / raw) [-- Attachment #1.1: Type: text/plain, Size: 667 bytes --] I found a small flaw in the placement of floats. \placefigure[left]... ended at the bottom of the page (before the footnotes), but on the next page the text began as if the figure was still there: xxxxxxxxxxxxxxxx flowing text xxxxx figure xxxxx flowing text xxxxxxxxxxxxxxxx flowing text (some whitespace followed by footnotes) ...........................................pagebreak............ (open space) flowing text first line second line of text starts normal at the left margin Is this known behaviour? Can it perhaps be massaged with parameter settings or is ConText here taking just somewhat oversized vertical space? Hans van der Meer [-- Attachment #1.2: Type: text/html, Size: 1652 bytes --] [-- Attachment #2: Type: text/plain, Size: 139 bytes --] _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2006-07-20 15:33 placefigure Hans van der Meer @ 2006-07-21 7:35 ` Taco Hoekwater 2006-07-21 9:28 ` placefigure Hans van der Meer 0 siblings, 1 reply; 29+ messages in thread From: Taco Hoekwater @ 2006-07-21 7:35 UTC (permalink / raw) Hans van der Meer wrote: > > Is this known behaviour? > Can it perhaps be massaged with parameter settings or is ConText here > taking just somewhat oversized vertical space? You can try to do \setupfloats[after=] to remove the whitespace below the image. Taco ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2006-07-21 7:35 ` placefigure Taco Hoekwater @ 2006-07-21 9:28 ` Hans van der Meer 0 siblings, 0 replies; 29+ messages in thread From: Hans van der Meer @ 2006-07-21 9:28 UTC (permalink / raw) On Jul 21, 2006, at 9:35, Taco Hoekwater wrote: > > > Hans van der Meer wrote: >> >> Is this known behaviour? > >> Can it perhaps be massaged with parameter settings or is ConText here >> taking just somewhat oversized vertical space? > > > You can try to do \setupfloats[after=] to remove the whitespace > below the image. No, that did not work. But thanks to pointing out \setupfloats I found I can change things with [spaceafter=small,spacebefore=small] and that worked for the finetuning. Hans van der Meer ^ permalink raw reply [flat|nested] 29+ messages in thread
* placefigure @ 2007-07-24 9:22 Liesbeth van der Plas 2007-07-24 9:51 ` placefigure luigi scarso 2007-07-24 10:09 ` placefigure Patrick Gundlach 0 siblings, 2 replies; 29+ messages in thread From: Liesbeth van der Plas @ 2007-07-24 9:22 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 747 bytes --] Hallo context users, I have a basic problem on laoding vector drawings. The photograph loads all right, the cat-drawing doensn't show up. ____________________________________________________________________ \useexternalfigure[jpgPhotoSmall][photo][type=jpg,width=2cm] \useexternalfigure[jpgPhotoBig][photo][type=jpg,width=4cm] \useexternalfigure[epsDrawingCat][cat][type=eps,width=4cm] \starttext \placefigure{A cat drawing (eps)}{\externalfigure[epsDrawingCat]} \placefigure{A small photo (jpg)}{\externalfigure[jpgPhotoSmall]} \placefigure{A big photo (jpg) }{\externalfigure[jpgPhotoBig]} \stoptext ___________________________________________________________________ -- liesbethvanderplas@gmail.com www.wiskunde-interactief.nl [-- Attachment #1.2: Type: text/html, Size: 2330 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-24 9:22 placefigure Liesbeth van der Plas @ 2007-07-24 9:51 ` luigi scarso 2007-07-24 13:06 ` placefigure Roelof Langman 2007-07-24 10:09 ` placefigure Patrick Gundlach 1 sibling, 1 reply; 29+ messages in thread From: luigi scarso @ 2007-07-24 9:51 UTC (permalink / raw) To: mailing list for ConTeXt users On 7/24/07, Liesbeth van der Plas <liesbethvanderplas@gmail.com> wrote: > > > Hallo context users, > > > > I have a basic problem on laoding vector drawings. > > The photograph loads all right, the cat-drawing doensn't show up. > > > > ____________________________________________________________________ > > > > \useexternalfigure[jpgPhotoSmall][photo][type=jpg,width=2cm] > \useexternalfigure[jpgPhotoBig][photo][type=jpg,width=4cm] > \useexternalfigure[epsDrawingCat][cat][type=eps,width=4cm] > > \starttext > > \placefigure{A cat drawing > (eps)}{\externalfigure[epsDrawingCat]} > \placefigure{A small photo > (jpg)}{\externalfigure[jpgPhotoSmall]} > > \placefigure{A big photo (jpg) }{\externalfigure[jpgPhotoBig]} > > \stoptext > ____________________ maybe eps to pdf epsDrawingCat ? luigi ---------------------------------------------------------------- If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-24 9:51 ` placefigure luigi scarso @ 2007-07-24 13:06 ` Roelof Langman 2007-07-24 14:03 ` placefigure Martin Schröder 0 siblings, 1 reply; 29+ messages in thread From: Roelof Langman @ 2007-07-24 13:06 UTC (permalink / raw) To: 'mailing list for ConTeXt users' This is a simple case of rtfm. From chapter 7 of the pdftex manual: "pdfTEX supports inclusion of pictures in png, jpeg, tiff and pdf format. The most common technique -the inclusion of eps figures- is replaced by pdf inclusion. eps files can be converted to pdf by GhostScript, Acrobat Distiller or other PostScript--to--pdf convertors." Cheers Roelof ---%><-------------- Roelof Langman Kerkstraat 184 1017 GT Amsterdam M 0622413491 >> The photograph loads all right, the cat-drawing doensn't show up. >> \useexternalfigure[jpgPhotoBig][photo][type=jpg,width=4cm] >> \useexternalfigure[epsDrawingCat][cat][type=eps,width=4cm] >> > maybe eps to pdf epsDrawingCat ? > luigi ---------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-24 13:06 ` placefigure Roelof Langman @ 2007-07-24 14:03 ` Martin Schröder 2007-07-25 8:43 ` placefigure Liesbeth van der Plas 0 siblings, 1 reply; 29+ messages in thread From: Martin Schröder @ 2007-07-24 14:03 UTC (permalink / raw) To: mailing list for ConTeXt users 2007/7/24, Roelof Langman <roelof.langman@gmail.com>: > This is a simple case of rtfm. From chapter 7 of the pdftex manual: > > "pdfTEX supports inclusion of pictures in png, jpeg, tiff and pdf format. Please update. tiff is long gone... Best Martin ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-24 14:03 ` placefigure Martin Schröder @ 2007-07-25 8:43 ` Liesbeth van der Plas 2007-07-25 14:34 ` placefigure Patrick Gundlach 0 siblings, 1 reply; 29+ messages in thread From: Liesbeth van der Plas @ 2007-07-25 8:43 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1295 bytes --] In GhostScript: Options àEPS Clip File à Convert à pdfwrite, Variable Page File à Convert à pdfwrite, Fixed Page Size File à Convert à pdfwrite, Shrink to fit Page Size I do get the picture now, but it is inbedded in a (small) 'page'; the frame is too big. Liesbeth 2007/7/24, Martin Schröder <martin@oneiros.de>: > > 2007/7/24, Roelof Langman <roelof.langman@gmail.com>: > > This is a simple case of rtfm. From chapter 7 of the pdftex manual: > > > > "pdfTEX supports inclusion of pictures in png, jpeg, tiff and pdf > format. > > Please update. tiff is long gone... > > Best > Martin > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > -- liesbethvanderplas@gmail.com www.wiskunde-interactief.nl [-- Attachment #1.2: Type: text/html, Size: 5613 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-25 8:43 ` placefigure Liesbeth van der Plas @ 2007-07-25 14:34 ` Patrick Gundlach [not found] ` <abcaff8f0707251140p5d4ed733ia3baeac36a8e6d9d@mail.gmail.com> 0 siblings, 1 reply; 29+ messages in thread From: Patrick Gundlach @ 2007-07-25 14:34 UTC (permalink / raw) To: ntg-context Hello Liesbeth, do you have a small sample eps file which gives you a problem? That way we might be able to help you better. Patrick ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
[parent not found: <abcaff8f0707251140p5d4ed733ia3baeac36a8e6d9d@mail.gmail.com>]
* Re: placefigure [not found] ` <abcaff8f0707251140p5d4ed733ia3baeac36a8e6d9d@mail.gmail.com> @ 2007-07-26 6:36 ` Liesbeth van der Plas 2007-07-26 12:36 ` placefigure Patrick Gundlach ` (2 more replies) 0 siblings, 3 replies; 29+ messages in thread From: Liesbeth van der Plas @ 2007-07-26 6:36 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1221 bytes --] Hallo Patrick, Yesterday I sent a few files, but I got a return that the message body was too big. Here are the three most important files from yesterday's map. Liesbeth 2007/7/25, Liesbeth van der Plas <liesbethvanderplas@gmail.com>: > > Hallo Patrick, > > Here the map with alle files; .tex, .eps, .pdf, ... > > Liesbeth > > > 2007/7/25, Patrick Gundlach <patrick@gundla.ch>: > > > > Hello Liesbeth, > > > > do you have a small sample eps file which gives you a problem? That > > way we might be able to help you better. > > > > Patrick > > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > > to the Wiki! > > > > maillist : ntg-context@ntg.nl / > > http://www.ntg.nl/mailman/listinfo/ntg-context > > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > > archive : https://foundry.supelec.fr/projects/contextrev/ > > wiki : http://contextgarden.net > > > > ___________________________________________________________________________________ > > > > > > -- > liesbethvanderplas@gmail.com > www.wiskunde-interactief.nl > > -- liesbethvanderplas@gmail.com www.wiskunde-interactief.nl [-- Attachment #1.2: Type: text/html, Size: 3182 bytes --] [-- Attachment #2: placefugure problem.zip --] [-- Type: application/zip, Size: 4761 bytes --] [-- Attachment #3: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-26 6:36 ` placefigure Liesbeth van der Plas @ 2007-07-26 12:36 ` Patrick Gundlach 2007-07-26 13:49 ` placefigure Liesbeth van der Plas 2007-07-26 17:27 ` placefigure olivier Turlier 2007-07-27 16:29 ` placefigure Sanjoy Mahajan 2 siblings, 1 reply; 29+ messages in thread From: Patrick Gundlach @ 2007-07-26 12:36 UTC (permalink / raw) To: ntg-context Hello Liesbeth, > Yesterday I sent a few files, but I got a return that the message body was > too big. > Here are the three most important files from yesterday's map. epstopdf breaks with this file. If, by chance, you use Mac OS X, you can use 'pstopdf' (the distiller from adobe). Then the pdf files have a tight bounding box. Patrick ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-26 12:36 ` placefigure Patrick Gundlach @ 2007-07-26 13:49 ` Liesbeth van der Plas 2007-07-26 15:12 ` placefigure Patrick Gundlach 2007-07-26 17:08 ` placefigure Peter Rolf 0 siblings, 2 replies; 29+ messages in thread From: Liesbeth van der Plas @ 2007-07-26 13:49 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1007 bytes --] I use Windows XP. 2007/7/26, Patrick Gundlach <patrick@gundla.ch>: > > Hello Liesbeth, > > > Yesterday I sent a few files, but I got a return that the message body > was > > too big. > > Here are the three most important files from yesterday's map. > > epstopdf breaks with this file. If, by chance, you use Mac OS X, you > can use 'pstopdf' (the distiller from adobe). Then the pdf files have > a tight bounding box. > > Patrick > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > -- liesbethvanderplas@gmail.com www.wiskunde-interactief.nl [-- Attachment #1.2: Type: text/html, Size: 1710 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-26 13:49 ` placefigure Liesbeth van der Plas @ 2007-07-26 15:12 ` Patrick Gundlach 2007-07-26 17:08 ` placefigure Peter Rolf 1 sibling, 0 replies; 29+ messages in thread From: Patrick Gundlach @ 2007-07-26 15:12 UTC (permalink / raw) To: ntg-context > I use Windows XP. Sorry Liesbeth, I am out of my wits then, perhaps there is somebody out here with some tricks. Perhaps you can use some special printer driver that is able to create different kind of eps or pdf and then use 'print to file' to create the pdf. Does ghostscript offer such a thing? I have no idea. Patrick ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-26 13:49 ` placefigure Liesbeth van der Plas 2007-07-26 15:12 ` placefigure Patrick Gundlach @ 2007-07-26 17:08 ` Peter Rolf 2007-07-26 17:49 ` placefigure Peter Rolf 1 sibling, 1 reply; 29+ messages in thread From: Peter Rolf @ 2007-07-26 17:08 UTC (permalink / raw) To: mailing list for ConTeXt users Hi Liesbeth, There is a problem with the bounding box (bb) of the eps file. Although gs shows it correctly (Info), it uses the media size (default A4) as border for the pdf. You can change the media size by hand (set it to bb), but it's less error prone to use "extract..." or "ps to eps" from the file menu. 1. open the eps file with gs 2. use "ps to eps" ( [x] automatically calculate ...] is set here) and save in a different file 3. convert this new file to pdf. The resulting pdf should have the correct size. Sorry, found no way to automatize it (I can't beleave this is not possible). HTH, Peter BTW: why don't you use MetaPost? Liesbeth van der Plas schrieb: > I use Windows XP. > > 2007/7/26, Patrick Gundlach <patrick@gundla.ch <mailto:patrick@gundla.ch>>: > > Hello Liesbeth, > > > Yesterday I sent a few files, but I got a return that the message > body was > > too big. > > Here are the three most important files from yesterday's map. > > epstopdf breaks with this file. If, by chance, you use Mac OS X, you > can use 'pstopdf' (the distiller from adobe). Then the pdf files have > a tight bounding box. > > Patrick > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an > entry to the Wiki! > > maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > > > > > -- > liesbethvanderplas@gmail.com <mailto:liesbethvanderplas@gmail.com> > www.wiskunde-interactief.nl <http://www.wiskunde-interactief.nl> > > > ------------------------------------------------------------------------ > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-26 17:08 ` placefigure Peter Rolf @ 2007-07-26 17:49 ` Peter Rolf 2007-07-27 13:38 ` placefigure Liesbeth van der Plas 0 siblings, 1 reply; 29+ messages in thread From: Peter Rolf @ 2007-07-26 17:49 UTC (permalink / raw) To: mailing list for ConTeXt users Peter Rolf schrieb: > Hi Liesbeth, > > There is a problem with the bounding box (bb) of the eps file. Although > gs shows it correctly (Info), it uses the media size (default A4) as > border for the pdf. > > You can change the media size by hand (set it to bb), but it's less > error prone to use "extract..." or "ps to eps" from the file menu. > sorry, this doesn't work. it seems, that i have made my tests with an already modified (media size) eps graphic. so the only working way i found, is to edit the media size. menu "media"-->"user defined..." set the values to the ones from the bounding box (hit "I" after you have loaded the gfx). for your example: BoundingBox 0 0 244 243 set the first value to 244pt, the second one to 243pt. now the conversion should work (retested!) :) <DEL> > 1. open the eps file with gs > 2. use "ps to eps" ( [x] automatically calculate ...] is set here) and > save in a different file > 3. convert this new file to pdf. The resulting pdf should have the > correct size. > <DEL/> > Sorry, found no way to automatize it (I can't beleave this is not possible). > > HTH, Peter > > BTW: why don't you use MetaPost? > > > Liesbeth van der Plas schrieb: >> I use Windows XP. >> >> 2007/7/26, Patrick Gundlach <patrick@gundla.ch <mailto:patrick@gundla.ch>>: >> >> Hello Liesbeth, >> >> > Yesterday I sent a few files, but I got a return that the message >> body was >> > too big. >> > Here are the three most important files from yesterday's map. >> >> epstopdf breaks with this file. If, by chance, you use Mac OS X, you >> can use 'pstopdf' (the distiller from adobe). Then the pdf files have >> a tight bounding box. >> >> Patrick >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an >> entry to the Wiki! >> >> maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : https://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ >> >> >> >> >> -- >> liesbethvanderplas@gmail.com <mailto:liesbethvanderplas@gmail.com> >> www.wiskunde-interactief.nl <http://www.wiskunde-interactief.nl> >> >> >> ------------------------------------------------------------------------ >> >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an entry to the Wiki! >> >> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : https://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-26 17:49 ` placefigure Peter Rolf @ 2007-07-27 13:38 ` Liesbeth van der Plas 2007-07-27 13:54 ` placefigure Peter Rolf 2007-07-27 14:46 ` placefigure Jörg Hagmann 0 siblings, 2 replies; 29+ messages in thread From: Liesbeth van der Plas @ 2007-07-27 13:38 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 5018 bytes --] Hello Patrick, Peter,.. The 3-step method doesn't work? I tried it over and over again. Changing the media size by hand does work if I guess the size of the picture (I don't have an option bb or bounding box). I think I can work with this method for the time being. Do you know if this bounding box problem is caused by the fact that I used Flash for making the picture? I mean, if I buy another vector drawing program (Adobe Illustrator for instance), the problem doesn't exist? Using MetaPost means that I must first learn the MP-programming language. I don't know if I have enough time for that. Or is there another way? Liesbeth 2007/7/26, Peter Rolf <indiego@gmx.net>: > > Peter Rolf schrieb: > > Hi Liesbeth, > > > > There is a problem with the bounding box (bb) of the eps file. Although > > gs shows it correctly (Info), it uses the media size (default A4) as > > border for the pdf. > > > > You can change the media size by hand (set it to bb), but it's less > > error prone to use "extract..." or "ps to eps" from the file menu. > > > sorry, this doesn't work. it seems, that i have made my tests with an > already modified (media size) eps graphic. so the only working way i > found, is to edit the media size. > > menu "media"-->"user defined..." > set the values to the ones from the bounding box (hit "I" after you have > loaded the gfx). > > for your example: > BoundingBox 0 0 244 243 > set the first value to 244pt, the second one to 243pt. > now the conversion should work (retested!) :) > > > <DEL> > > 1. open the eps file with gs > > 2. use "ps to eps" ( [x] automatically calculate ...] is set here) and > > save in a different file > > 3. convert this new file to pdf. The resulting pdf should have the > > correct size. > > > <DEL/> > > > Sorry, found no way to automatize it (I can't beleave this is not > possible). > > > > HTH, Peter > > > > BTW: why don't you use MetaPost? > > > > > > Liesbeth van der Plas schrieb: > >> I use Windows XP. > >> > >> 2007/7/26, Patrick Gundlach <patrick@gundla.ch <mailto: > patrick@gundla.ch>>: > >> > >> Hello Liesbeth, > >> > >> > Yesterday I sent a few files, but I got a return that the message > >> body was > >> > too big. > >> > Here are the three most important files from yesterday's map. > >> > >> epstopdf breaks with this file. If, by chance, you use Mac OS X, > you > >> can use 'pstopdf' (the distiller from adobe). Then the pdf files > have > >> a tight bounding box. > >> > >> Patrick > >> > ___________________________________________________________________________________ > >> If your question is of interest to others as well, please add an > >> entry to the Wiki! > >> > >> maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / > >> http://www.ntg.nl/mailman/listinfo/ntg-context > >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > >> archive : https://foundry.supelec.fr/projects/contextrev/ > >> wiki : http://contextgarden.net > >> > ___________________________________________________________________________________ > >> > >> > >> > >> > >> -- > >> liesbethvanderplas@gmail.com <mailto:liesbethvanderplas@gmail.com> > >> www.wiskunde-interactief.nl <http://www.wiskunde-interactief.nl> > >> > >> > >> > ------------------------------------------------------------------------ > >> > >> > ___________________________________________________________________________________ > >> If your question is of interest to others as well, please add an entry > to the Wiki! > >> > >> maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > >> archive : https://foundry.supelec.fr/projects/contextrev/ > >> wiki : http://contextgarden.net > >> > ___________________________________________________________________________________ > > > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > > archive : https://foundry.supelec.fr/projects/contextrev/ > > wiki : http://contextgarden.net > > > ___________________________________________________________________________________ > > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > -- liesbethvanderplas@gmail.com www.wiskunde-interactief.nl [-- Attachment #1.2: Type: text/html, Size: 8658 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-27 13:38 ` placefigure Liesbeth van der Plas @ 2007-07-27 13:54 ` Peter Rolf 2007-07-28 5:07 ` placefigure Sanjoy Mahajan 2007-07-27 14:46 ` placefigure Jörg Hagmann 1 sibling, 1 reply; 29+ messages in thread From: Peter Rolf @ 2007-07-27 13:54 UTC (permalink / raw) To: mailing list for ConTeXt users Liesbeth van der Plas schrieb: > Hello Patrick, Peter,.. > > > The 3-step method doesn't work? I tried it over and over again. > yes, sorry about that. only changing the media size works. > Changing the media size by hand does work if I guess the size of the > picture (I don't have an option bb or bounding box). I think I can work > with this method for the time being. > you don't need to guess. you can load the eps graphic in ghostview, then hit the "i"-key. a window is opening, showing you the size of the bounding box. the first two values (0 0) show the coordinates of the lower left corner, the next two (244 243) the coordinates of the upper right corner of the bb. so this gfx is 244pt width and 242pt height (or at least it's bb). but i agree, that this method is a pain in the ???, if you have many graphics. peter > > > Do you know if this bounding box problem is caused by the fact that I > used Flash for making the picture? I mean, if I buy another vector > drawing program (Adobe Illustrator for instance), the problem doesn't > exist? > > > > Using MetaPost means that I must first learn the MP-programming > language. I don't know if I have enough time for that. Or is there > another way? > > > Liesbeth > > > 2007/7/26, Peter Rolf <indiego@gmx.net <mailto:indiego@gmx.net>>: > > Peter Rolf schrieb: > > Hi Liesbeth, > > > > There is a problem with the bounding box (bb) of the eps file. > Although > > gs shows it correctly (Info), it uses the media size (default A4) as > > border for the pdf. > > > > You can change the media size by hand (set it to bb), but it's less > > error prone to use "extract..." or "ps to eps" from the file menu. > > > sorry, this doesn't work. it seems, that i have made my tests with an > already modified (media size) eps graphic. so the only working way i > found, is to edit the media size. > > menu "media"-->"user defined..." > set the values to the ones from the bounding box (hit "I" after you have > loaded the gfx). > > for your example: > BoundingBox 0 0 244 243 > set the first value to 244pt, the second one to 243pt. > now the conversion should work (retested!) :) > > > <DEL> > > 1. open the eps file with gs > > 2. use "ps to eps" ( [x] automatically calculate ...] is set here) and > > save in a different file > > 3. convert this new file to pdf. The resulting pdf should have the > > correct size. > > > <DEL/> > > > Sorry, found no way to automatize it (I can't beleave this is not > possible). > > > > HTH, Peter > > > > BTW: why don't you use MetaPost? > > > > > > Liesbeth van der Plas schrieb: > >> I use Windows XP. > >> > >> 2007/7/26, Patrick Gundlach <patrick@gundla.ch > <mailto:patrick@gundla.ch> <mailto: patrick@gundla.ch > <mailto:patrick@gundla.ch>>>: > >> > >> Hello Liesbeth, > >> > >> > Yesterday I sent a few files, but I got a return that the > message > >> body was > >> > too big. > >> > Here are the three most important files from yesterday's map. > >> > >> epstopdf breaks with this file. If, by chance, you use Mac OS > X, you > >> can use 'pstopdf' (the distiller from adobe). Then the pdf > files have > >> a tight bounding box. > >> > >> Patrick > >> > ___________________________________________________________________________________ > >> If your question is of interest to others as well, please add an > >> entry to the Wiki! > >> > >> maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> > <mailto:ntg-context@ntg.nl <mailto:ntg-context@ntg.nl>> / > >> http://www.ntg.nl/mailman/listinfo/ntg-context > >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > >> archive : https://foundry.supelec.fr/projects/contextrev/ > >> wiki : http://contextgarden.net > >> > ___________________________________________________________________________________ > >> > >> > >> > >> > >> -- > >> liesbethvanderplas@gmail.com > <mailto:liesbethvanderplas@gmail.com> > <mailto:liesbethvanderplas@gmail.com > <mailto:liesbethvanderplas@gmail.com>> > >> www.wiskunde-interactief.nl <http://www.wiskunde-interactief.nl> > < http://www.wiskunde-interactief.nl> > >> > >> > >> > ------------------------------------------------------------------------ > >> > >> > ___________________________________________________________________________________ > > >> If your question is of interest to others as well, please add an > entry to the Wiki! > >> > >> maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / > http://www.ntg.nl/mailman/listinfo/ntg-context > >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > >> archive : https://foundry.supelec.fr/projects/contextrev/ > >> wiki : http://contextgarden.net > >> > ___________________________________________________________________________________ > > > > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an > entry to the Wiki! > > > > maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / > http://www.ntg.nl/mailman/listinfo/ntg-context > > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > > archive : https://foundry.supelec.fr/projects/contextrev/ > > wiki : http://contextgarden.net <http://contextgarden.net> > > > ___________________________________________________________________________________ > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an > entry to the Wiki! > > maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > > > > > -- > liesbethvanderplas@gmail.com <mailto:liesbethvanderplas@gmail.com> > www.wiskunde-interactief.nl <http://www.wiskunde-interactief.nl> > > > ------------------------------------------------------------------------ > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-27 13:54 ` placefigure Peter Rolf @ 2007-07-28 5:07 ` Sanjoy Mahajan 2007-07-28 7:19 ` placefigure Liesbeth van der Plas 0 siblings, 1 reply; 29+ messages in thread From: Sanjoy Mahajan @ 2007-07-28 5:07 UTC (permalink / raw) To: mailing list for ConTeXt users > you can load the eps graphic in ghostview, then hit the "i"-key. > but i agree, that this method is a pain in the ???, if you have many > graphics. The following command often finds the right bounding box: gs -sDEVICE=bbox -dSAFER -dBATCH -dNOPAUSE -q file.eps -Sanjoy "Creativity can be a social contribution, but only in so far as society is free to use the results." --Richard Stallman ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-28 5:07 ` placefigure Sanjoy Mahajan @ 2007-07-28 7:19 ` Liesbeth van der Plas 2007-07-28 15:14 ` placefigure Wolfgang Schuster 2007-07-29 4:24 ` placefigure Sanjoy Mahajan 0 siblings, 2 replies; 29+ messages in thread From: Liesbeth van der Plas @ 2007-07-28 7:19 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1122 bytes --] Hallo Sanjoy, I tried your command but it doens't work on my pc. Liesbeth 2007/7/28, Sanjoy Mahajan <sanjoy@mrao.cam.ac.uk>: > > > you can load the eps graphic in ghostview, then hit the "i"-key. > > but i agree, that this method is a pain in the ???, if you have many > > graphics. > > The following command often finds the right bounding box: > > gs -sDEVICE=bbox -dSAFER -dBATCH -dNOPAUSE -q file.eps > > -Sanjoy > > "Creativity can be a social contribution, but only in so > far as society is free to use the results." --Richard Stallman > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > -- liesbethvanderplas@gmail.com www.wiskunde-interactief.nl [-- Attachment #1.2: Type: text/html, Size: 1918 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-28 7:19 ` placefigure Liesbeth van der Plas @ 2007-07-28 15:14 ` Wolfgang Schuster 2007-07-29 4:24 ` placefigure Sanjoy Mahajan 1 sibling, 0 replies; 29+ messages in thread From: Wolfgang Schuster @ 2007-07-28 15:14 UTC (permalink / raw) To: ntg-context On Sat, 28 Jul 2007 09:19:45 +0200 "Liesbeth van der Plas" <liesbethvanderplas@gmail.com> wrote: > Hallo Sanjoy, > > I tried your command but it doens't work on my pc. > > Liesbeth try "gswin32c -sDEVICE=bbox -dSAFER -dBATCH -dNOPAUSE -q file.eps" Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-28 7:19 ` placefigure Liesbeth van der Plas 2007-07-28 15:14 ` placefigure Wolfgang Schuster @ 2007-07-29 4:24 ` Sanjoy Mahajan 1 sibling, 0 replies; 29+ messages in thread From: Sanjoy Mahajan @ 2007-07-29 4:24 UTC (permalink / raw) To: mailing list for ConTeXt users > I tried your command but it doesn't work on my pc. Maybe ghostscript isn't installed? What was the exact error? On my system (i386 laptop with Ubuntu GNU/Linux): $ gs -h GPL Ghostscript 8.54 (2006-05-17) but most versions of ghostscript should work. -Sanjoy "Creativity can be a social contribution, but only in so far as society is free to use the results." --Richard Stallman ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-27 13:38 ` placefigure Liesbeth van der Plas 2007-07-27 13:54 ` placefigure Peter Rolf @ 2007-07-27 14:46 ` Jörg Hagmann 1 sibling, 0 replies; 29+ messages in thread From: Jörg Hagmann @ 2007-07-27 14:46 UTC (permalink / raw) To: mailing list for ConTeXt users I use Illustrator. That certainly works -- you can save the pictures as pdfs (it's Adobe, after all). Liesbeth van der Plas wrote: > Hello Patrick, Peter,.. > > > The 3-step method doesn't work? I tried it over and over again. > > Changing the media size by hand does work if I guess the size of the > picture (I don't have an option bb or bounding box). I think I can > work with this method for the time being. > > > > Do you know if this bounding box problem is caused by the fact that I > used Flash for making the picture? I mean, if I buy another vector > drawing program (Adobe Illustrator for instance), the problem doesn't > exist? > > > > Using MetaPost means that I must first learn the MP-programming > language. I don't know if I have enough time for that. Or is there > another way? > > > Liesbeth > > > 2007/7/26, Peter Rolf <indiego@gmx.net <mailto:indiego@gmx.net>>: > > Peter Rolf schrieb: > > Hi Liesbeth, > > > > There is a problem with the bounding box (bb) of the eps file. > Although > > gs shows it correctly (Info), it uses the media size (default A4) as > > border for the pdf. > > > > You can change the media size by hand (set it to bb), but it's less > > error prone to use "extract..." or "ps to eps" from the file menu. > > > sorry, this doesn't work. it seems, that i have made my tests with an > already modified (media size) eps graphic. so the only working way i > found, is to edit the media size. > > menu "media"-->"user defined..." > set the values to the ones from the bounding box (hit "I" after > you have > loaded the gfx). > > for your example: > BoundingBox 0 0 244 243 > set the first value to 244pt, the second one to 243pt. > now the conversion should work (retested!) :) > > > <DEL> > > 1. open the eps file with gs > > 2. use "ps to eps" ( [x] automatically calculate ...] is set > here) and > > save in a different file > > 3. convert this new file to pdf. The resulting pdf should have the > > correct size. > > > <DEL/> > > > Sorry, found no way to automatize it (I can't beleave this is > not possible). > > > > HTH, Peter > > > > BTW: why don't you use MetaPost? > > > > > > Liesbeth van der Plas schrieb: > >> I use Windows XP. > >> > >> 2007/7/26, Patrick Gundlach <patrick@gundla.ch > <mailto:patrick@gundla.ch> <mailto: patrick@gundla.ch > <mailto:patrick@gundla.ch>>>: > >> > >> Hello Liesbeth, > >> > >> > Yesterday I sent a few files, but I got a return that the > message > >> body was > >> > too big. > >> > Here are the three most important files from yesterday's map. > >> > >> epstopdf breaks with this file. If, by chance, you use Mac > OS X, you > >> can use 'pstopdf' (the distiller from adobe). Then the pdf > files have > >> a tight bounding box. > >> > >> Patrick > >> > ___________________________________________________________________________________ > >> If your question is of interest to others as well, please > add an > >> entry to the Wiki! > >> > >> maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> > <mailto:ntg-context@ntg.nl <mailto:ntg-context@ntg.nl>> / > >> http://www.ntg.nl/mailman/listinfo/ntg-context > >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > >> archive : https://foundry.supelec.fr/projects/contextrev/ > >> wiki : http://contextgarden.net > >> > ___________________________________________________________________________________ > >> > >> > >> > >> > >> -- > >> liesbethvanderplas@gmail.com > <mailto:liesbethvanderplas@gmail.com> > <mailto:liesbethvanderplas@gmail.com > <mailto:liesbethvanderplas@gmail.com>> > >> www.wiskunde-interactief.nl > <http://www.wiskunde-interactief.nl> < > http://www.wiskunde-interactief.nl> > >> > >> > >> > ------------------------------------------------------------------------ > >> > >> > ___________________________________________________________________________________ > > >> If your question is of interest to others as well, please add > an entry to the Wiki! > >> > >> maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / > http://www.ntg.nl/mailman/listinfo/ntg-context > >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > >> archive : https://foundry.supelec.fr/projects/contextrev/ > >> wiki : http://contextgarden.net > >> > ___________________________________________________________________________________ > > > > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an > entry to the Wiki! > > > > maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / > http://www.ntg.nl/mailman/listinfo/ntg-context > > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > > archive : https://foundry.supelec.fr/projects/contextrev/ > > wiki : http://contextgarden.net <http://contextgarden.net> > > > ___________________________________________________________________________________ > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an > entry to the Wiki! > > maillist : ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > > > > > -- > liesbethvanderplas@gmail.com <mailto:liesbethvanderplas@gmail.com> > www.wiskunde-interactief.nl <http://www.wiskunde-interactief.nl> > ------------------------------------------------------------------------ > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > -- Prof.Dr.med. Jörg Hagmann-Zanolari Institute of Biochemistry and Genetics Centre of Biomedicine, University of Basel Mattenstrasse 28 CH-4058 Basel Switzerland Phone +41 (0)61 267 3565 ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-26 6:36 ` placefigure Liesbeth van der Plas 2007-07-26 12:36 ` placefigure Patrick Gundlach @ 2007-07-26 17:27 ` olivier Turlier 2007-07-27 16:29 ` placefigure Sanjoy Mahajan 2 siblings, 0 replies; 29+ messages in thread From: olivier Turlier @ 2007-07-26 17:27 UTC (permalink / raw) To: ntg-context Le Thu, 26 Jul 2007 08:36:53 +0200, Liesbeth van der Plas a écrit : > Hallo Patrick, > > Yesterday I sent a few files, but I got a return that the message body was > too big. > Here are the three most important files from yesterday's map. > > Liesbeth > > > > 2007/7/25, Liesbeth van der Plas <liesbethvanderplas@gmail.com>: >> >> Hallo Patrick, >> >> Here the map with alle files; .tex, .eps, .pdf, ... >> >> Liesbeth >> >> >> 2007/7/25, Patrick Gundlach <patrick@gundla.ch>: >> > >> > Hello Liesbeth, >> > >> > do you have a small sample eps file which gives you a problem? That >> > way we might be able to help you better. >> > >> > Patrick >> > >> > ___________________________________________________________________________________ >> > If your question is of interest to others as well, please add an entry >> > to the Wiki! >> > >> > maillist : ntg-context@ntg.nl / >> > http://www.ntg.nl/mailman/listinfo/ntg-context >> > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> > archive : https://foundry.supelec.fr/projects/contextrev/ >> > wiki : http://contextgarden.net >> > >> > ___________________________________________________________________________________ >> > >> >> >> >> -- >> liesbethvanderplas@gmail.com >> www.wiskunde-interactief.nl >> >> Hi Liesbeth, If you cannot convert correctly your image, I can try to 'pstopdf' it. Send it directly to my mail address if it's under 9.5 M, an if bigger, winrar can cut it into smaller chunks. Maybe it'll solve your pb. -- Olivier TURLIER CRP La Rouguière 101 Bd des Libérateurs 13367 MARSEILLE CEDEX 11 tel : (33) 04 91 18 56 00 o.turlier@gmail.com ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-26 6:36 ` placefigure Liesbeth van der Plas 2007-07-26 12:36 ` placefigure Patrick Gundlach 2007-07-26 17:27 ` placefigure olivier Turlier @ 2007-07-27 16:29 ` Sanjoy Mahajan 2 siblings, 0 replies; 29+ messages in thread From: Sanjoy Mahajan @ 2007-07-27 16:29 UTC (permalink / raw) To: mailing list for ConTeXt users > Here are the three most important files from yesterday's map. I looked at the .eps file in emacs, and it has junk at the beginning and the end. My system (GNU/Linux) says: $ file testPlaatje.eps testPlaatje.eps: DOS EPS Binary File Postscript starts at byte 30 length 4085 Metafile starts at byte 4115 length 2658 If I delete those bytes at the beginning and end, then epstopdf produces a pdf with a tight bounding box (at least here). Not sure what a 'Metafile' is, but maybe it's some MS-Windows-specific stuff. But it's not needed for the .eps to work. -Sanjoy "Creativity can be a social contribution, but only in so far as society is free to use the results." --Richard Stallman ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-24 9:22 placefigure Liesbeth van der Plas 2007-07-24 9:51 ` placefigure luigi scarso @ 2007-07-24 10:09 ` Patrick Gundlach 2007-07-24 12:45 ` placefigure Liesbeth van der Plas 1 sibling, 1 reply; 29+ messages in thread From: Patrick Gundlach @ 2007-07-24 10:09 UTC (permalink / raw) To: ntg-context Hello, > I have a basic problem on laoding vector drawings. > > The photograph loads all right, the cat-drawing doensn't show up. > Perhaps this is due to the fact that pdftex doesn't handle eps? If this is true, you can convert eps files to pdf with epstopdf, that ships with texlive. Patrick ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2007-07-24 10:09 ` placefigure Patrick Gundlach @ 2007-07-24 12:45 ` Liesbeth van der Plas 0 siblings, 0 replies; 29+ messages in thread From: Liesbeth van der Plas @ 2007-07-24 12:45 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1337 bytes --] I don't succeed in using the program epstopdf for my drawing. Probably it is also not very handy to alter a lot of drawings bij hand first? Or maybe there is a way to make MetaPost drawings without learning the MetaPost language? I have a lot of drawings made in Macromedia(=Adobe) Flash (or FreeHand). These programs have no export option to pdf or MetaPost. following the instructions of 2007/7/24, Patrick Gundlach <patrick@gundla.ch>: > > Hello, > > > > I have a basic problem on laoding vector drawings. > > > > The photograph loads all right, the cat-drawing doensn't show up. > > > Perhaps this is due to the fact that pdftex doesn't handle eps? If > this is true, you can convert eps files to pdf with epstopdf, that > ships with texlive. > > Patrick > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > -- liesbethvanderplas@gmail.com www.wiskunde-interactief.nl [-- Attachment #1.2: Type: text/html, Size: 2116 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* placefigure @ 2013-03-21 16:26 Hans Hagen 2013-03-21 22:04 ` placefigure Sietse Brouwer 0 siblings, 1 reply; 29+ messages in thread From: Hans Hagen @ 2013-03-21 16:26 UTC (permalink / raw) To: mailing list for ConTeXt users Hi, while fixing some buglets that showed up in the test suite I ran into: \starttext test \placefigure[somewhere:alpha][whatever]{alpha}{} test \placefigure[somewhere:beta] [whatever]{beta}{} test \placefigure[somewhere:gamma][whatever]{gamma}{} test \placefigure[somewhere:delta][whatever]{delta}{} test \placefigure{}{} in \in{figure}[whatever] bla bla \placenamedfloat[figure][*l*] \placenamedfloat[figure][gamma] \placenamedfloat[figure][beta] \stoptext maybe worth wikifying (bug will be solved in beta) ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2013-03-21 16:26 placefigure Hans Hagen @ 2013-03-21 22:04 ` Sietse Brouwer 2013-03-21 22:08 ` placefigure Hans Hagen 0 siblings, 1 reply; 29+ messages in thread From: Sietse Brouwer @ 2013-03-21 22:04 UTC (permalink / raw) To: mailing list for ConTeXt users On 21 March 2013 17:26, Hans Hagen <pragma@wxs.nl> wrote: > while fixing some buglets that showed up in the test suite I ran into \placenamedfloat > maybe worth wikifying (bug will be solved in beta) Wikified: http://wiki.contextgarden.net/Command/placenamedfloat Below is what I wrote; is that correct? Groetjes, Sietse == Description == If a float is placed (with \placefloat) location argument somewhere:name, it is not placed immediately. Instead, it may be manually placed elsewhere with \placenamedfloat. == Example == This example declares four figures to be placed elsewhere: alpha, beta, gamma, and delta. The first \placenamedfloat call places all figures with l in their name (i.e. alpha and delta; the next two calls place gamma and beta, respectively. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: placefigure 2013-03-21 22:04 ` placefigure Sietse Brouwer @ 2013-03-21 22:08 ` Hans Hagen 0 siblings, 0 replies; 29+ messages in thread From: Hans Hagen @ 2013-03-21 22:08 UTC (permalink / raw) To: mailing list for ConTeXt users On 3/21/2013 11:04 PM, Sietse Brouwer wrote: > On 21 March 2013 17:26, Hans Hagen <pragma@wxs.nl> wrote: >> while fixing some buglets that showed up in the test suite I ran into \placenamedfloat >> maybe worth wikifying (bug will be solved in beta) > > Wikified: > http://wiki.contextgarden.net/Command/placenamedfloat > > Below is what I wrote; is that correct? indeed, thanks, Hans -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 29+ messages in thread
end of thread, other threads:[~2013-03-21 22:08 UTC | newest] Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2006-07-20 15:33 placefigure Hans van der Meer 2006-07-21 7:35 ` placefigure Taco Hoekwater 2006-07-21 9:28 ` placefigure Hans van der Meer 2007-07-24 9:22 placefigure Liesbeth van der Plas 2007-07-24 9:51 ` placefigure luigi scarso 2007-07-24 13:06 ` placefigure Roelof Langman 2007-07-24 14:03 ` placefigure Martin Schröder 2007-07-25 8:43 ` placefigure Liesbeth van der Plas 2007-07-25 14:34 ` placefigure Patrick Gundlach [not found] ` <abcaff8f0707251140p5d4ed733ia3baeac36a8e6d9d@mail.gmail.com> 2007-07-26 6:36 ` placefigure Liesbeth van der Plas 2007-07-26 12:36 ` placefigure Patrick Gundlach 2007-07-26 13:49 ` placefigure Liesbeth van der Plas 2007-07-26 15:12 ` placefigure Patrick Gundlach 2007-07-26 17:08 ` placefigure Peter Rolf 2007-07-26 17:49 ` placefigure Peter Rolf 2007-07-27 13:38 ` placefigure Liesbeth van der Plas 2007-07-27 13:54 ` placefigure Peter Rolf 2007-07-28 5:07 ` placefigure Sanjoy Mahajan 2007-07-28 7:19 ` placefigure Liesbeth van der Plas 2007-07-28 15:14 ` placefigure Wolfgang Schuster 2007-07-29 4:24 ` placefigure Sanjoy Mahajan 2007-07-27 14:46 ` placefigure Jörg Hagmann 2007-07-26 17:27 ` placefigure olivier Turlier 2007-07-27 16:29 ` placefigure Sanjoy Mahajan 2007-07-24 10:09 ` placefigure Patrick Gundlach 2007-07-24 12:45 ` placefigure Liesbeth van der Plas 2013-03-21 16:26 placefigure Hans Hagen 2013-03-21 22:04 ` placefigure Sietse Brouwer 2013-03-21 22:08 ` placefigure Hans Hagen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).