* Problems with TikZ and absolute positioning
@ 2016-01-04 14:51 Michał Goliński
2016-01-04 15:05 ` Hans Hagen
0 siblings, 1 reply; 4+ messages in thread
From: Michał Goliński @ 2016-01-04 14:51 UTC (permalink / raw)
To: ntg-context
The following code:
\usemodule[tikz]
\starttext
\starttikzpicture[remember picture,overlay]
\node [xshift=1cm,yshift=1cm] at (current page.south west)
[text width=7cm,fill=red!20,rounded corners,above right]
{
This is an absolutely positioned text in the
lower left corner. No shipout-hackery is used.
};
\stoptikzpicture
\stoptext
gives a blank page with a red box in the lower left corner. At least
this is how it works in current TeXLive. When compiling, a temporary
.pgf file is created with the following contents:
\pgfsyspdfmark {pgfid1}{4661756}{46204089}
When compiling with the current beta this doesn't work.
If the .pgf file is already present, one gets:
tex error > tex error on line 1 in file mwe.pgf: ! Undefined
control sequence
l.1 \pgfsyspdfmark
{pgfid1}{4661756}{46204089}
1 >> \pgfsyspdfmark {pgfid1}{4661756}{46204089}
When one removes the .pgf file, the compilation succeeds (with empty
.pgf file), but in the PDF there is no red box, and the text is not in
the lower left corner (although text is wrapped as if it were in a box).
When compiling one gets the warning:
Package pgf: Warning! Your graphic driver pgfsys-dvips.def does not
support marking the current position. This warning is given only once.
Non-PDF special ignored!
Non-PDF special ignored!
...
Is this a bug or maybe absolute positioning is done differently?
Best regards
Michal Golinski
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Problems with TikZ and absolute positioning
2016-01-04 14:51 Problems with TikZ and absolute positioning Michał Goliński
@ 2016-01-04 15:05 ` Hans Hagen
2016-01-05 9:16 ` Michał Goliński
2016-01-05 9:32 ` Michał Goliński
0 siblings, 2 replies; 4+ messages in thread
From: Hans Hagen @ 2016-01-04 15:05 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 1/4/2016 3:51 PM, Michał Goliński wrote:
> The following code:
>
> \usemodule[tikz]
add this to cont-new.mkiv:
\let \pdfsavepos \savepos
\let \pdflastxpos \lastxpos
\let \pdflastypos \lastypos
i'll add it for a while to the core till tikz is in sync with the latest
luatex
> \starttext
> \starttikzpicture[remember picture,overlay]
> \node [xshift=1cm,yshift=1cm] at (current page.south west)
> [text width=7cm,fill=red!20,rounded corners,above right]
> {
> This is an absolutely positioned text in the
> lower left corner. No shipout-hackery is used.
> };
> \stoptikzpicture
> \stoptext
>
>
> gives a blank page with a red box in the lower left corner. At least
> this is how it works in current TeXLive. When compiling, a temporary
> .pgf file is created with the following contents:
>
> \pgfsyspdfmark {pgfid1}{4661756}{46204089}
>
>
>
> When compiling with the current beta this doesn't work.
>
> If the .pgf file is already present, one gets:
>
> tex error > tex error on line 1 in file mwe.pgf: ! Undefined
> control sequence
>
> l.1 \pgfsyspdfmark
> {pgfid1}{4661756}{46204089}
>
> 1 >> \pgfsyspdfmark {pgfid1}{4661756}{46204089}
>
>
> When one removes the .pgf file, the compilation succeeds (with empty
> .pgf file), but in the PDF there is no red box, and the text is not in
> the lower left corner (although text is wrapped as if it were in a box).
>
> When compiling one gets the warning:
>
> Package pgf: Warning! Your graphic driver pgfsys-dvips.def does not
> support marking the current position. This warning is given only once.
> Non-PDF special ignored!
> Non-PDF special ignored!
> ...
>
> Is this a bug or maybe absolute positioning is done differently?
>
> Best regards
> Michal Golinski
> ___________________________________________________________________________________
>
> If your question is of interest to others as well, please add an entry
> to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
--
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Problems with TikZ and absolute positioning
2016-01-04 15:05 ` Hans Hagen
@ 2016-01-05 9:16 ` Michał Goliński
2016-01-05 9:32 ` Michał Goliński
1 sibling, 0 replies; 4+ messages in thread
From: Michał Goliński @ 2016-01-05 9:16 UTC (permalink / raw)
To: mailing list for ConTeXt users
Thanks Hans for the reply,
Unfortunately this fix doesn't help. I've tried adding the lines just
after the \unprotect in cont-new.mkiv and just before \protect, and
running:
$ CONTEXTROOT="$PWD/tex"
PATH="$PWD/bin:$CONTEXTROOT/texmf-linux-64/bin:$PATH" mtxrun --script
./bin/mtx-update.lua --force --update --make --context=beta
--platform=linux-64 --texroot="$CONTEXTROOT" --update --modules=all
--fonts=all
but to no avail. The errors are exactly like before.
On 2016-01-04 16:05, Hans Hagen wrote:
> On 1/4/2016 3:51 PM, Michał Goliński wrote:
>> The following code:
>>
>> \usemodule[tikz]
>
>
> add this to cont-new.mkiv:
>
> \let \pdfsavepos \savepos
> \let \pdflastxpos \lastxpos
> \let \pdflastypos \lastypos
>
> i'll add it for a while to the core till tikz is in sync with the
> latest luatex
>
>
>> \starttext
>> \starttikzpicture[remember picture,overlay]
>> \node [xshift=1cm,yshift=1cm] at (current page.south west)
>> [text width=7cm,fill=red!20,rounded corners,above right]
>> {
>> This is an absolutely positioned text in the
>> lower left corner. No shipout-hackery is used.
>> };
>> \stoptikzpicture
>> \stoptext
>>
>>
>> gives a blank page with a red box in the lower left corner. At least
>> this is how it works in current TeXLive. When compiling, a temporary
>> .pgf file is created with the following contents:
>>
>> \pgfsyspdfmark {pgfid1}{4661756}{46204089}
>>
>>
>>
>> When compiling with the current beta this doesn't work.
>>
>> If the .pgf file is already present, one gets:
>>
>> tex error > tex error on line 1 in file mwe.pgf: ! Undefined
>> control sequence
>>
>> l.1 \pgfsyspdfmark
>> {pgfid1}{4661756}{46204089}
>>
>> 1 >> \pgfsyspdfmark {pgfid1}{4661756}{46204089}
>>
>>
>> When one removes the .pgf file, the compilation succeeds (with empty
>> .pgf file), but in the PDF there is no red box, and the text is not in
>> the lower left corner (although text is wrapped as if it were in a
>> box).
>>
>> When compiling one gets the warning:
>>
>> Package pgf: Warning! Your graphic driver pgfsys-dvips.def does not
>> support marking the current position. This warning is given only once.
>> Non-PDF special ignored!
>> Non-PDF special ignored!
>> ...
>>
>> Is this a bug or maybe absolute positioning is done differently?
>>
>> Best regards
>> Michal Golinski
>> ___________________________________________________________________________________
>>
>> If your question is of interest to others as well, please add an entry
>> to the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
>> archive : http://foundry.supelec.fr/projects/contextrev/
>> wiki : http://contextgarden.net
>> ___________________________________________________________________________________
>
>
> --
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry
> to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Problems with TikZ and absolute positioning
2016-01-04 15:05 ` Hans Hagen
2016-01-05 9:16 ` Michał Goliński
@ 2016-01-05 9:32 ` Michał Goliński
1 sibling, 0 replies; 4+ messages in thread
From: Michał Goliński @ 2016-01-05 9:32 UTC (permalink / raw)
To: mailing list for ConTeXt users
Found a strange interaction with TikZ in my texmf, deleted my texmf and
now everything works as expected (although I have to run context twice).
So please diregard my previous mail.
Best regards
Michal Golinski
On 2016-01-04 16:05, Hans Hagen wrote:
> On 1/4/2016 3:51 PM, Michał Goliński wrote:
>> The following code:
>>
>> \usemodule[tikz]
>
>
> add this to cont-new.mkiv:
>
> \let \pdfsavepos \savepos
> \let \pdflastxpos \lastxpos
> \let \pdflastypos \lastypos
>
> i'll add it for a while to the core till tikz is in sync with the
> latest luatex
>
>
>> \starttext
>> \starttikzpicture[remember picture,overlay]
>> \node [xshift=1cm,yshift=1cm] at (current page.south west)
>> [text width=7cm,fill=red!20,rounded corners,above right]
>> {
>> This is an absolutely positioned text in the
>> lower left corner. No shipout-hackery is used.
>> };
>> \stoptikzpicture
>> \stoptext
>>
>>
>> gives a blank page with a red box in the lower left corner. At least
>> this is how it works in current TeXLive. When compiling, a temporary
>> .pgf file is created with the following contents:
>>
>> \pgfsyspdfmark {pgfid1}{4661756}{46204089}
>>
>>
>>
>> When compiling with the current beta this doesn't work.
>>
>> If the .pgf file is already present, one gets:
>>
>> tex error > tex error on line 1 in file mwe.pgf: ! Undefined
>> control sequence
>>
>> l.1 \pgfsyspdfmark
>> {pgfid1}{4661756}{46204089}
>>
>> 1 >> \pgfsyspdfmark {pgfid1}{4661756}{46204089}
>>
>>
>> When one removes the .pgf file, the compilation succeeds (with empty
>> .pgf file), but in the PDF there is no red box, and the text is not in
>> the lower left corner (although text is wrapped as if it were in a
>> box).
>>
>> When compiling one gets the warning:
>>
>> Package pgf: Warning! Your graphic driver pgfsys-dvips.def does not
>> support marking the current position. This warning is given only once.
>> Non-PDF special ignored!
>> Non-PDF special ignored!
>> ...
>>
>> Is this a bug or maybe absolute positioning is done differently?
>>
>> Best regards
>> Michal Golinski
>> ___________________________________________________________________________________
>>
>> If your question is of interest to others as well, please add an entry
>> to the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
>> archive : http://foundry.supelec.fr/projects/contextrev/
>> wiki : http://contextgarden.net
>> ___________________________________________________________________________________
>
>
> --
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry
> to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-01-05 9:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-04 14:51 Problems with TikZ and absolute positioning Michał Goliński
2016-01-04 15:05 ` Hans Hagen
2016-01-05 9:16 ` Michał Goliński
2016-01-05 9:32 ` Michał Goliński
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).