* Re: texexec not launching mpost [not found] ` <200010271431.QAA03427@bar.loria.fr> @ 2000-10-27 15:55 ` Hans Hagen 2000-10-27 19:20 ` textext problem Denis B. Roegel 0 siblings, 1 reply; 24+ messages in thread From: Hans Hagen @ 2000-10-27 15:55 UTC (permalink / raw) Cc: Denis B. Roegel, ntg-context At 04:31 PM 10/27/00 +0200, Denis B. Roegel wrote: >`Hans Hagen' wrote >> >> Did you regenetare the metafun format with the latest context mp files? >> Keep in mind that some of this stuff is rather experimental. > >Yes, I think I regenerated it. But in my mp-text.mp, I have only >one parameter for textext: > >%D version=2000.07.10, > >vardef textext@#(expr txt) = > interim labeloffset := textextoffset ; > noftexpictures := noftexpictures + 1 ; >... > >And the mpgraph.mp file calls it with two parameters if I am not mistaken. Ah, a bug! Indeed "textext" only takes one argument, so the metafun manual is wrong! I'll repair the manual. This went unnoticed since i let mpost run in batch mode and a second arg does not harm the mp output. Thanks for noticing, Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* textext problem 2000-10-27 15:55 ` texexec not launching mpost Hans Hagen @ 2000-10-27 19:20 ` Denis B. Roegel 2000-10-28 14:24 ` Hans Hagen 0 siblings, 1 reply; 24+ messages in thread From: Denis B. Roegel @ 2000-10-27 19:20 UTC (permalink / raw) Cc: Denis B. Roegel, Denis B. Roegel, ntg-context `Hans Hagen' wrote > > Ah, a bug! Indeed "textext" only takes one argument, so the metafun manual > is wrong! > Ok, but there is still the problem with "unknown": vardef textext@#(expr txt) = interim labeloffset := textextoffset ; noftexpictures := noftexpictures + 1 ; if string txt : write "% figure " & decimal charcode & " : " & "texpictures[" & decimal noftexpictures & "] := btex " & txt & " etex ;" to jobname & ".mpt" ; if unknown texpictures[noftexpictures] : thelabel@#("unknown",origin) <--------------------------- else : thelabel@#(texpictures[noftexpictures],origin) fi else : thelabel@#(txt,origin) fi enddef ; Denis ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: textext problem 2000-10-27 19:20 ` textext problem Denis B. Roegel @ 2000-10-28 14:24 ` Hans Hagen 2000-10-30 20:21 ` Denis B. Roegel 0 siblings, 1 reply; 24+ messages in thread From: Hans Hagen @ 2000-10-28 14:24 UTC (permalink / raw) Cc: Denis B. Roegel, ntg-context At 09:20 PM 10/27/00 +0200, Denis B. Roegel wrote: >`Hans Hagen' wrote >> >> Ah, a bug! Indeed "textext" only takes one argument, so the metafun manual >> is wrong! >> > >Ok, but there is still the problem with "unknown": > > thelabel@#("unknown",origin) <--------------------------- This only happens when the file is not processed. There should be a file with the suffix .mpt containing % figure 1 : texpictures[1] := btex \hbox spread 1em{\hss \strut Zapf (1)\hss } This file is generated in the first mp run, and then merged doRunMP($MpName,0) ; # test for labels my $belabels = 0 ; if (open(MP, "<$MpName.mpt")) { while (<MP>) See doRunMP for details. You may want to uncomment the line # unlink "mptrace.tmp" ; rename ($MpFile, "mptrace.tmp") ; and check the tmp file after a run for the zapf text. It works here, but when it works at your and other places as well, it would be great, since then I can start embedding the graph package in context [i already patched hobby's file to provide real tex texts instead of pseudo text so that we can get real good labels and so]. Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: textext problem 2000-10-28 14:24 ` Hans Hagen @ 2000-10-30 20:21 ` Denis B. Roegel 2000-10-31 7:50 ` Hans Hagen 0 siblings, 1 reply; 24+ messages in thread From: Denis B. Roegel @ 2000-10-30 20:21 UTC (permalink / raw) Cc: Denis B. Roegel, Denis B. Roegel, ntg-context `Hans Hagen' wrote > > It works here, but when it works at your and other places as well, it would > be great, since then I can start embedding the graph package in context [i > already patched hobby's file to provide real tex texts instead of pseudo > text so that we can get real good labels and so]. Stupid me, I had some of the .pl files non-executable... When I corrected this, it worked! Sorry for the inconvenience, Denis ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: textext problem 2000-10-30 20:21 ` Denis B. Roegel @ 2000-10-31 7:50 ` Hans Hagen 0 siblings, 0 replies; 24+ messages in thread From: Hans Hagen @ 2000-10-31 7:50 UTC (permalink / raw) Cc: Denis B. Roegel, ntg-context At 09:21 PM 10/30/00 +0100, Denis B. Roegel wrote: >`Hans Hagen' wrote >> >> It works here, but when it works at your and other places as well, it would >> be great, since then I can start embedding the graph package in context [i >> already patched hobby's file to provide real tex texts instead of pseudo >> text so that we can get real good labels and so]. > >Stupid me, I had some of the .pl files non-executable... >When I corrected this, it worked! > >Sorry for the inconvenience, No problem. Another thing you should be aware of is that when you want to use positional graphic, you can best use pdftex and pdf output. It does work in dvi too, but i had no time yet to bundle the perl scripts needed to parse the file [taco hacked an existing dvi parser to handle positioning and it works ok but slow; also, fabrice popineau made windvi pos special robust]. Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* texexec not launching mpost @ 2000-10-18 21:18 Denis B. Roegel 2000-10-19 3:21 ` Mr. Wang Lei 0 siblings, 1 reply; 24+ messages in thread From: Denis B. Roegel @ 2000-10-18 21:18 UTC (permalink / raw) Cc: Denis B. Roegel When I run texexec on the file below, the mpgraph.mp file is created, but not metaposted. I can call texexec as many times as I want, it doesn't help. I have to call mpost by hand and then it works. I have shell_escape = 1 if that matters. Thanks, Denis \starttext \setupcolors[state=start] \startuniqueMPgraphic{concept} draw btex \bf CONCEPT etex rotated 60 withcolor .8white; currentpicture := currentpicture ysized (\overlaywidth-.5cm); \stopuniqueMPgraphic \defineoverlay[concept][\uniqueMPgraphic{concept}] \setupbackgrounds[page][background=concept] Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text Some text \stoptext ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-18 21:18 texexec not launching mpost Denis B. Roegel @ 2000-10-19 3:21 ` Mr. Wang Lei 2000-10-19 9:04 ` Hans Hagen 2000-10-19 13:01 ` Denis B. Roegel 0 siblings, 2 replies; 24+ messages in thread From: Mr. Wang Lei @ 2000-10-19 3:21 UTC (permalink / raw) Cc: NTG-ConTeXt On Wed, 18 Oct 2000, Denis B. Roegel wrote: > When I run texexec on the file below, the mpgraph.mp file > is created, but not metaposted. I can call texexec as many > times as I want, it doesn't help. I have to call mpost > by hand and then it works. I have shell_escape = 1 if it should be "shell_escape = t" You need set other environment as suggestted by hans in metafun manual. you can see if you have set the following in your cont-sys.tex: \runMPgraphicstrue \runMPTEXgraphicstrue \recycleMPslotstrue \useMETAFUNformattrue You'd better set metapost command using texexec in you texmf.cnf: MPXCOMMAND = texexec --mptex TEX = texexec --once --batch --nomp You may need edit the texexec.ini, too. comment the corresponding line which set the MpToTeXExecutable to mptotex. for example, if you use tetex, comment the line: for tetex set MpToTeXExecutable to mptotex Hans, I have not find the excutable command named "mptotex" both in tetex and fptex. They only have "mpto". Another problem is that if I set the output default is pdftex in my cont-usr.tex, texexec will give a "can not found tmpgraphic.1" message if I use \btex ... \etex in the metapost figure. because the part in \btex ... \etex will be processed by texexec and give a pdf output, so there is no dvi and can not generate tmpgraphic.1 which needed by mptopdf. Wang ------------------------------------------------------------------------ Mr. Wang Lei Phone: 86-10-62541687 Institute of Applied Mathematics Email: lwang@amath8.amt.ac.cn Chinese Academy of Science Address: P.O.Box 2734, Beijing, 100080 ------------------------------------------------------------------------ ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-19 3:21 ` Mr. Wang Lei @ 2000-10-19 9:04 ` Hans Hagen 2000-10-19 11:41 ` Mr. Wang Lei 2000-10-19 13:01 ` Denis B. Roegel 1 sibling, 1 reply; 24+ messages in thread From: Hans Hagen @ 2000-10-19 9:04 UTC (permalink / raw) Cc: Denis B. Roegel, NTG-ConTeXt At 11:21 AM 10/19/00 +0800, Mr. Wang Lei wrote: >Hans, I have not find the excutable command named >"mptotex" both in tetex and fptex. They only have >"mpto". Another problem is that if I set the output right, on tetex/fptex it's mpto while in some other distributions mptotex. >default is pdftex in my cont-usr.tex, texexec will >give a "can not found tmpgraphic.1" message if I >use \btex ... \etex in the metapost figure. because Ah, that's a good point: (1) add --output=dvips to \executeMPtex in supp-mps.tex (generate format again) (2) add $OutputFormat = "dvips" before RunConTeXtFile ($MpTmp) in texexec.pl This should force context / pdftex into dvi mode. If it works ok, i'll patch the files. Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-19 9:04 ` Hans Hagen @ 2000-10-19 11:41 ` Mr. Wang Lei 0 siblings, 0 replies; 24+ messages in thread From: Mr. Wang Lei @ 2000-10-19 11:41 UTC (permalink / raw) Cc: Denis B. Roegel, NTG-ConTeXt On Thu, 19 Oct 2000, Hans Hagen wrote: > Ah, that's a good point: > > (1) add --output=dvips to \executeMPtex in supp-mps.tex (generate format > again) > (2) add $OutputFormat = "dvips" before RunConTeXtFile ($MpTmp) in texexec.pl > > This should force context / pdftex into dvi mode. If it works ok, i'll > patch the files. > It works. I test some example files, texexec always get the correct output for the run time metapost files. Wang ------------------------------------------------------------------------ Mr. Wang Lei Phone: 86-10-62541687 Institute of Applied Mathematics Email: lwang@amath8.amt.ac.cn Chinese Academy of Science Address: P.O.Box 2734, Beijing, 100080 ------------------------------------------------------------------------ ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-19 3:21 ` Mr. Wang Lei 2000-10-19 9:04 ` Hans Hagen @ 2000-10-19 13:01 ` Denis B. Roegel 2000-10-19 13:45 ` Hans Hagen 1 sibling, 1 reply; 24+ messages in thread From: Denis B. Roegel @ 2000-10-19 13:01 UTC (permalink / raw) Cc: Denis B. Roegel, NTG-ConTeXt `Mr. Wang Lei' wrote > > On Wed, 18 Oct 2000, Denis B. Roegel wrote: > > > When I run texexec on the file below, the mpgraph.mp file > > is created, but not metaposted. I can call texexec as many > > times as I want, it doesn't help. I have to call mpost > > by hand and then it works. I have shell_escape = 1 if > > it should be "shell_escape = t" I thought anything different from f is true. Anyway, when I make this change and create a cont-sys.tex (where should this file be located in my $HOME/texmf tree?) it doesn't work any better. Please keep in mind that in certain cases, texexec launches the compilation of mpgraph.mp, but not in this case. Hence, there might be another problem. > > You need set other environment as suggestted by hans > in metafun manual. you can see if you have set the following > in your cont-sys.tex: > > \runMPgraphicstrue > \runMPTEXgraphicstrue > \recycleMPslotstrue > \useMETAFUNformattrue > > You'd better set metapost command using texexec in you > texmf.cnf: > > MPXCOMMAND = texexec --mptex > TEX = texexec --once --batch --nomp I am a bit reluctant to make these changes, since I will not always be using texexec. I often use tex, latex and mpost alone. I case it matters, below is the compilation of my example with no prior mpgraph present: bar context2 221 % texexec test16 TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 executable : pdfetex format : cont-en inputfile : test16 output : standard interface : en current mode : all TeX run : 1 This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) entering extended mode (./test16.tex{/local/hugo/texlive5/texmf/pdftex/config/pdftex.cfg} ConTeXt ver: 2000.9.21 fmt: 2000.10.5 int: english mes: english language : language en is active system : cont-new loaded (/usr/local/tex/texmflocal/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! ) system : cont-old loaded (/usr/local/tex/texmflocal/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/tex/texmflocal/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (./cont-sys.tex) bodyfont : 12pt rm is loaded language : patterns 2-en-2 2-de-2 2-fr-2 2-nl-2 loaded specials : tex,postscript,rokicki loaded system : test16.top loaded (./test16.top) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) systems : begin file test16 at line 1 color : rgb color space is supported color : cmyk color space is supported color : system rgb is global activated layout : calculating backgrounds Randomizer initialized to 1045559809. TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 metapost to tex : mpgraph executable : pdfetex format : cont-en inputfile : tmpgraph output : standard interface : en options : once batch nomp current mode : all This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) entering extended mode run time : 1 seconds dvi to metapost : mpgraph metapost : mpgraph format : metafun This is MetaPost, Version 0.641 (Web2C 7.3.2x) figures : figure mpgraph can not be found (./test16.tuo) [1.1] [2.2] systems : end file test16 at line 105 ) Output written on test16.dvi (2 pages, 4744 bytes). Transcript written on test16.log. run time : 5 seconds sorting and checking : running texutil TeXUtil 7.3 - ConTeXt / PRAGMA ADE 1992-2000 action : processing commands, lists and registers option : sorting IJ under Y option : converting high ASCII values input file : test16.tui output file : test16.tuo passed commands : 5 remapped keys : 0 register entries : 0 -> 0 entries 0 references synonym entries : 0 -> 0 entries embedded files : 1 bar context2 222 % ------------------------------------------------------------------------ But the copilation of \setupcolors[state=start] \starttext \runMPgraphicstrue \def\processword#1{\noindent\framed[frame=off,background=lions]{#1}\space} \startuniqueMPgraphic{lions b} path p; p:=fullsquare xyscaled (\overlaywidth,\overlayheight) randomized 5pt; pickup pencircle scaled 1pt; fill p withcolor .850white; draw p withcolor .625yellow; \stopuniqueMPgraphic \defineoverlay[lions][\uniqueMPgraphic{lions b}] \setupalign[broad,middle] \processwords {As you may know, \TeX's ambassador is a lion, while \METAFONT{} is represented by a lioness. It is still unclear if they have a relationship, but if so, and if a baby is born, may it enjoy \METAFUN.} \stoptext triggers metapost with exactly the same environment. Even if I add \runMPgraphicstrue to my first example (previous posting), there are still no mpgraph.1, etc. around. When I did the tests, I took care to remove all auxiliary files in both cases. Denis ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-19 13:01 ` Denis B. Roegel @ 2000-10-19 13:45 ` Hans Hagen 2000-10-19 19:17 ` Denis B. Roegel 0 siblings, 1 reply; 24+ messages in thread From: Hans Hagen @ 2000-10-19 13:45 UTC (permalink / raw) Cc: Mr. Wang Lei, Denis B. Roegel, NTG-ConTeXt At 03:01 PM 10/19/00 +0200, Denis B. Roegel wrote: >> You'd better set metapost command using texexec in you >> texmf.cnf: >> >> MPXCOMMAND = texexec --mptex >> TEX = texexec --once --batch --nomp > >I am a bit reluctant to make these changes, since I will not >always be using texexec. I often use tex, latex and mpost alone. This is not really needed, since texexex nills them anyway. > output : standard is there, btw any difference if you use --pdf? > output : standard > interface : en > options : once batch nomp > current mode : all it looks like some figs are created arent't they? >This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) >entering extended mode > > run time : 1 seconds > dvi to metapost : mpgraph > metapost : mpgraph > format : metafun >This is MetaPost, Version 0.641 (Web2C 7.3.2x) you may want to set \traceexternalfigurestrue to see where context is searching the files. >figures : figure mpgraph can not be found can you comment the lines concerning insertMPfile in cont-new.tex (when present) and see what happens? It may be related to dvi versus pdf since I only tested these features with pdf -) although they should work with dvi too. Keep in mind that this is still quite new. Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-19 13:45 ` Hans Hagen @ 2000-10-19 19:17 ` Denis B. Roegel 2000-10-19 19:30 ` Denis B. Roegel 0 siblings, 1 reply; 24+ messages in thread From: Denis B. Roegel @ 2000-10-19 19:17 UTC (permalink / raw) Cc: Denis B. Roegel, Mr. Wang Lei, NTG-ConTeXt `Hans Hagen' wrote > > At 03:01 PM 10/19/00 +0200, Denis B. Roegel wrote: > > >> You'd better set metapost command using texexec in you > >> texmf.cnf: > >> > >> MPXCOMMAND = texexec --mptex > >> TEX = texexec --once --batch --nomp > > > >I am a bit reluctant to make these changes, since I will not > >always be using texexec. I often use tex, latex and mpost alone. > > This is not really needed, since texexex nills them anyway. > > > output : standard > > is there, btw any difference if you use --pdf? > No, it doesn't work any better. Also, in both cases, if there is already some mpgraph.1 around from another run, it is just taken as is. > > > output : standard > > interface : en > > options : once batch nomp > > current mode : all > > it looks like some figs are created arent't they? The mpgraph.mp file is created, but not processed by mpost. > you may want to set \traceexternalfigurestrue to see where context is > searching the files. > I get This is MetaPost, Version 0.641 (Web2C 7.3.2x) figures : figure mpgraph can not be found [analyzing ./texutil.tuf on mpgraph.1] [not found] [analyzing ./texutil.tuf on mpgraph.1] [not found] [analyzing ./texutil.tuf on mpgraph.1] [not found] [anal yzing ./texutil.tuf on mpgraph.1] [not found] [analyzing ./texutil.tuf on mpgra ph.* surrogate] [not found] [analyzing ./texutil.tuf on mpgraph.* surrogate] [n ot found] [analyzing ./texutil.tuf on mpgraph.* surrogate] [not found] [analyzi ng ./texutil.tuf on mpgraph.* surrogate] [not found] [mpgraph.1: t={mps,eps,mps ,pdf,png,jpg,tif,tex} m={mps,eps,mps,pdf,png,jpg,tif,tex} l=dummy w=11796480 h= 7864320 sx=100.0 sy=100.0 ox=0 oy=0] (./test16.tuo) [1.1] [2.2] systems : end file test16 at line 108 ) Actually, the problem is that mpost doesn't find mpgraph which is in the current directory. I get the same message if I rerun texexec. ------- ... run time : 1 seconds dvi to metapost : mpgraph metapost : mpgraph format : metafun This is MetaPost, Version 0.641 (Web2C 7.3.2x) figures : figure mpgraph can not be found [analyzing ./texutil.tuf on mpgraph.1] [not found] [analyzing ./texutil.tuf on mpgraph.1] [not found] [analyzing ./texutil.tuf on mpgraph.1] [not found] [anal yzing ./texutil.tuf on mpgraph.1] [not found] [analyzing ./texutil.tuf on mpgra ph.* surrogate] [not found] [analyzing ./texutil.tuf on mpgraph.* surrogate] [n ot found] [analyzing ./texutil.tuf on mpgraph.* surrogate] [not found] [analyzi ng ./texutil.tuf on mpgraph.* surrogate] [not found] [mpgraph.1: t={mps,eps,mps ,pdf,png,jpg,tif,tex} m={mps,eps,mps,pdf,png,jpg,tif,tex} l=dummy w=11796480 h= 7864320 sx=100.0 sy=100.0 ox=0 oy=0] (./test16.tuo) [1.1] [2.2] systems : end file test16 at line 108 ) Output written on test16.dvi (2 pages, 4744 bytes). Transcript written on test16.log. run time : 6 seconds sorting and checking : running texutil TeXUtil 7.3 - ConTeXt / PRAGMA ADE 1992-2000 action : processing commands, lists and registers option : sorting IJ under Y option : converting high ASCII values input file : test16.tui output file : test16.tuo passed commands : 5 remapped keys : 0 register entries : 0 -> 0 entries 0 references synonym entries : 0 -> 0 entries embedded files : 1 bar context2 259 % ll mpgraph.* -rw-r--r-- 1 roegel model 122 Oct 19 21:08 mpgraph.log -rw-r--r-- 1 roegel model 1609 Oct 19 21:08 mpgraph.mp -rw-r--r-- 1 roegel model 377 Oct 19 21:08 mpgraph.mpx bar context2 260 % mpost mpgraph.mp This is MetaPost, Version 0.641 (Web2C 7.3.2x) (mpgraph.mp (/usr/local/tex5/texmflocal/metapost/context/mp-tool.mp) (/usr/local/tex5/texmflocal/metapost/context/mp-spec.mp) (/usr/local/tex5/texmflocal/metapost/context/mp-page.mp) (/usr/local/tex5/texmflocal/metapost/context/mp-core.mp) [1] ) 1 output file written: mpgraph.1 Transcript written on mpgraph.log. bar context2 261 % more mpgraph.mp % runtime generated graphics of job "test16" mpgraph:=1; randomseed := 3974; if unknown context_tool : input mp-tool ; fi ; if unknown context_spec : input mp-spec ; fi ; defaultfont := "cmr10" ; defaultscale := 12.0pt/10pt ; if not known _data_prefix_ : string _data_prefix_ , _data_suffix_ ; fi ; _data_prefix_ := "mpd-" ; _data_suffix_ := ".mpd" ; boolean collapse_data ; collapse_data := true ; _data_suffix_ := ".mpd" ; if unknown context_page : input mp-page ; fi ; boolean PageStateAvailable ; PageStateAvailable := true ; boolean OnRightPage ; OnRightPage := true ; def LoadPageState = OnRightPage := true; PageNumber := 1; PaperHeight := 845.04684pt; PaperWidth := 597.50787pt; PrintPaperHeight := 845.04684pt; PrintPaperWidth := 597.50787pt; TopSpace := 71.12546pt; BackSpace := 71.13275pt; MakeupHeight := 711.3191pt; MakeupWidth := 426.78743pt; TopHeight := 0.0pt; TopDistance := 0.0pt; HeaderHeight := 56.90294pt; HeaderDistance := 0.0pt; TextHeight := 597.51323pt; FooterDistance := 0.0pt; FooterHeight := 56.90294pt; BottomDistance := 0.0pt; BottomHeight := 0.0pt; LeftEdgeWidth := 0.0pt; LeftEdgeDistance := 0.0pt; LeftMarginWidth := 75.58197pt; LeftMarginDistance := 11.99829pt; TextWidth := 426.78743pt; RightMarginDistance := 11.99829pt; RightMarginWidth := 75.58197pt; RightEdgeDistance := 0.0pt; RightEdgeWidth := 0.0pt; PageOffset := 0.0pt; PageDepth := 0.0pt; enddef ; if unknown context_core : input mp-core.mp ; fi ; ;; verbatimtex etex; beginfig(1); draw btex \bf CONCEPT etex rotated 60 withcolor .8white; currentpicture := currentpicture ysized (597.50787pt -.5cm); endfig; end. ----------------- > >figures : figure mpgraph can not be found > > can you comment the lines concerning insertMPfile in cont-new.tex (when > present) and see what happens? > I don't have anything concerning insertMPfile in cont-new, but I have it in supp-mps.tex. If I add \let\insertMPfile\undefined to my test file, I get as expected: ========= run time : 2 seconds dvi to metapost : mpgraph metapost : mpgraph format : metafun This is MetaPost, Version 0.641 (Web2C 7.3.2x) ! Undefined control sequence. \loadMPgraphic ...finsertMPgraphics \insertMPfile {#1}{#2}\fi } \douseMPbox ...hicfile .\the \currentMPgraphic }{} \deallocateMPslot \current... \handleuniqueMPgraphic ...x {MP:\overlaystamp :#1} \else \nouseMPbox {MP:\ove... \douniqueMPgraphic ...es [#1][#2]\getvalue {MP:#1} {}} <to be read again> } \executedefinedoverlay ... {\the \everyoverlay #2} }\dimen 0=\wd 0 \advance \... ... l.100 ? ========= I hope this helps... Thanks, Denis ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-19 19:17 ` Denis B. Roegel @ 2000-10-19 19:30 ` Denis B. Roegel 2000-10-20 2:34 ` Mr. Wang Lei 0 siblings, 1 reply; 24+ messages in thread From: Denis B. Roegel @ 2000-10-19 19:30 UTC (permalink / raw) Cc: Hans Hagen, Denis B. Roegel, Mr. Wang Lei, NTG-ConTeXt I have narrowed the problem down. It is certainly connected with btex/etex. If I comment the first draw below, it works. If it is not commented, the mpgraph is not found. I'd welcome an explanation! Denis ========= \starttext \runMPgraphicstrue \setupcolors[state=start] \startuniqueMPgraphic{concept} % draw btex \bf CONCEPT etex rotated 60 withcolor .8white; draw origin -- (1cm,1cm); currentpicture := currentpicture ysized (\overlaywidth-.5cm); \stopuniqueMPgraphic \defineoverlay[concept][\uniqueMPgraphic{concept}] \setupbackgrounds[page][background=concept] Some text Some text Some text Some text Some text Some text Some text Some text ... ========= In both runs, there is only the .tex file at the beginning. No auxiliary files and no mpgraph* ========= 1) First run, with line not commented: ========= bar context2 291 % texexec test17.tex TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 executable : pdfetex format : cont-en inputfile : test17 output : standard interface : en current mode : all TeX run : 1 This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) entering extended mode (./test17.tex{/local/hugo/texlive5/texmf/pdftex/config/pdftex.cfg} ConTeXt ver: 2000.9.21 fmt: 2000.10.5 int: english mes: english language : language en is active system : cont-new loaded (/usr/local/tex5/texmflocal/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! ) system : cont-old loaded (/usr/local/tex5/texmflocal/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/tex5/texmflocal/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (./cont-sys.tex) bodyfont : 12pt rm is loaded language : patterns 2-en-2 2-de-2 2-fr-2 2-nl-2 loaded specials : tex,postscript,rokicki loaded system : test17.top loaded (./test17.top) systems : begin file test17 at line 1 color : rgb color space is supported color : cmyk color space is supported color : system rgb is global activated layout : calculating backgrounds Randomizer initialized to 1505245913. TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 metapost to tex : mpgraph executable : pdfetex format : cont-en inputfile : tmpgraph output : standard interface : en options : once batch nomp current mode : all This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) entering extended mode run time : 1 seconds dvi to metapost : mpgraph metapost : mpgraph format : metafun This is MetaPost, Version 0.641 (Web2C 7.3.2x) figures : figure mpgraph can not be found [1.1] [2.2] systems : end file test17 at line 107 ) Output written on test17.dvi (2 pages, 4744 bytes). Transcript written on test17.log. .... ================================================================== ========= 1) Second run, with line commented: ========= bar context2 294 % texexec test17.tex TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 executable : pdfetex format : cont-en inputfile : test17 output : standard interface : en current mode : all TeX run : 1 This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) entering extended mode (./test17.tex{/local/hugo/texlive5/texmf/pdftex/config/pdftex.cfg} ConTeXt ver: 2000.9.21 fmt: 2000.10.5 int: english mes: english language : language en is active system : cont-new loaded (/usr/local/tex5/texmflocal/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! ) system : cont-old loaded (/usr/local/tex5/texmflocal/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/tex5/texmflocal/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (./cont-sys.tex) bodyfont : 12pt rm is loaded language : patterns 2-en-2 2-de-2 2-fr-2 2-nl-2 loaded specials : tex,postscript,rokicki loaded system : test17.top loaded (./test17.top) systems : begin file test17 at line 1 color : rgb color space is supported color : cmyk color space is supported color : system rgb is global activated layout : calculating backgrounds Randomizer initialized to 1506412629.This is MetaPost, Version 0.641 (Web2C 7.3.2x) (mpgraph.mp [1] ) 1 output file written: mpgraph.1 Transcript written on mpgraph.log. figures : dimensions of ./mpgraph.1 loaded from figurefile itself [MP fonts ./mpgraph.1] [1.1] [2.2] systems : end file test17 at line 107 ) Output written on test17.dvi (2 pages, 4604 bytes). Transcript written on test17.log. run time : 2 seconds sorting and checking : running texutil ... ========== My texmf.cnf file has shell_escape = t and my ./cont-sys.tex file is \runMPgraphicstrue \runMPTEXgraphicstrue \recycleMPslotstrue \useMETAFUNformattrue And the September 21 context is in /usr/local/tex5/texmflocal, since it is newer than the texlive 5 CD. Denis ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-19 19:30 ` Denis B. Roegel @ 2000-10-20 2:34 ` Mr. Wang Lei 2000-10-20 14:13 ` Denis B. Roegel 0 siblings, 1 reply; 24+ messages in thread From: Mr. Wang Lei @ 2000-10-20 2:34 UTC (permalink / raw) Cc: Hans Hagen, NTG-ConTeXt On Thu, 19 Oct 2000, Denis B. Roegel wrote: > I have narrowed the problem down. It is certainly > connected with btex/etex. If I comment the first draw below, > it works. If it is not commented, the mpgraph is not found. > I'd welcome an explanation! Are you sure you have comment the following line in your texexec.ini as I point in my last mail? for tetex set MpToTeXExecutable to mptotex Because the context set the MPtoTeXExecutable to "mptotex" for teTeX and fpTeX, but teTeX or fpTeX may named this util as "mpto". I have experenced the same problem before, so I think your problem may be the same. Wang ------------------------------------------------------------------------ Mr. Wang Lei Phone: 86-10-62541687 Institute of Applied Mathematics Email: lwang@amath8.amt.ac.cn Chinese Academy of Science Address: P.O.Box 2734, Beijing, 100080 ------------------------------------------------------------------------ ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-20 2:34 ` Mr. Wang Lei @ 2000-10-20 14:13 ` Denis B. Roegel 2000-10-20 15:59 ` Hans Hagen 2000-10-20 17:36 ` Mr. Lei Wang 0 siblings, 2 replies; 24+ messages in thread From: Denis B. Roegel @ 2000-10-20 14:13 UTC (permalink / raw) Cc: Denis B. Roegel, Hans Hagen, NTG-ConTeXt `Mr. Wang Lei' wrote > > Are you sure you have comment the following line in > your texexec.ini as I point in my last mail? > > for tetex set MpToTeXExecutable to mptotex > > Because the context set the MPtoTeXExecutable to "mptotex" > for teTeX and fpTeX, but teTeX or fpTeX may named this util > as "mpto". I have experenced the same problem before, so > I think your problem may be the same. I don't think so. I have an mpto executable, but no mptotex. If I perform your suggested change, I get ... Randomizer initialized to 1119063014. TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 metapost to tex : mpgraph sh: mptotex: not found metapost : mpgraph format : metafun This is MetaPost, Version 0.641 (Web2C 7.3.2x) figures : figure mpgraph can not be found (./test16.tuo) [1.1] [2.2] systems : end file test16 at line 105 ) ... Denis ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-20 14:13 ` Denis B. Roegel @ 2000-10-20 15:59 ` Hans Hagen 2000-10-20 18:56 ` Denis B. Roegel 2000-10-20 17:36 ` Mr. Lei Wang 1 sibling, 1 reply; 24+ messages in thread From: Hans Hagen @ 2000-10-20 15:59 UTC (permalink / raw) Cc: NTG-ConTeXt At 04:13 PM 10/20/00 +0200, Denis B. Roegel wrote: >`Mr. Wang Lei' wrote >> >> Are you sure you have comment the following line in >> your texexec.ini as I point in my last mail? >> >> for tetex set MpToTeXExecutable to mptotex >> >> Because the context set the MPtoTeXExecutable to "mptotex" >> for teTeX and fpTeX, but teTeX or fpTeX may named this util >> as "mpto". I have experenced the same problem before, so >> I think your problem may be the same. > >I don't think so. I have an mpto executable, but no mptotex. >If I perform your suggested change, I get > >... >Randomizer initialized to 1119063014. > TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 > > metapost to tex : mpgraph >sh: mptotex: not found Yes, so you have to set MpToTeXExecutable to mpto or comment the line mentioned in texexec.ini [maybe you should check your texexec.ini with texexec.rme] It really works when set up ok. They problem here is that [sigh] file names differ per system. Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-20 15:59 ` Hans Hagen @ 2000-10-20 18:56 ` Denis B. Roegel 2000-10-20 19:09 ` Marc van Dongen 2000-10-22 18:30 ` Hans Hagen 0 siblings, 2 replies; 24+ messages in thread From: Denis B. Roegel @ 2000-10-20 18:56 UTC (permalink / raw) Cc: Denis B. Roegel, NTG-ConTeXt `Hans Hagen' wrote > > >Randomizer initialized to 1119063014. > > TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 > > > > metapost to tex : mpgraph > >sh: mptotex: not found > > Yes, so you have to set MpToTeXExecutable to mpto or comment the line > mentioned in texexec.ini [maybe you should check your texexec.ini with > texexec.rme] It really works when set up ok. I have done all of this, it doesn't work. Neither commenting the line, nor removing it. What can I do now? Maybe if I understand exactly how it works I can try to debug? texexec calls mpost, which should call mpto. This apparently works since there is no such error as above. But what I do not understand is why the mpto run fails, because that's the problem, isn't it? How can I investigate if mpto is really called and trap it? Thanks, Denis ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-20 18:56 ` Denis B. Roegel @ 2000-10-20 19:09 ` Marc van Dongen 2000-10-21 21:46 ` Denis B. Roegel 2000-10-22 18:30 ` Hans Hagen 1 sibling, 1 reply; 24+ messages in thread From: Marc van Dongen @ 2000-10-20 19:09 UTC (permalink / raw) Cc: NTG-ConTeXt Denis B. Roegel (Denis.Roegel@loria.fr) wrote: [snip] : that's the problem, isn't it? How can I investigate if mpto : is really called and trap it? I haven't followed the discuission, so excuse me if what I write doesn't make sense. Trapping mpto or whatever program doesn't seem to be too difficult. Simply rename it to mpto_old, and create a new mpto which calls mpto_old. If you're using unix you can use redirection to catch errors/output and append them to a log file. Regards, Marc van Dongen ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-20 19:09 ` Marc van Dongen @ 2000-10-21 21:46 ` Denis B. Roegel 2000-10-22 18:49 ` Hans Hagen 0 siblings, 1 reply; 24+ messages in thread From: Denis B. Roegel @ 2000-10-21 21:46 UTC (permalink / raw) Cc: Denis B. Roegel, NTG-ConTeXt `Marc van Dongen' wrote > > Denis B. Roegel (Denis.Roegel@loria.fr) wrote: > > [snip] > > : that's the problem, isn't it? How can I investigate if mpto > : is really called and trap it? > > I haven't followed the discuission, so excuse me if what > I write doesn't make sense. Trapping mpto or whatever > program doesn't seem to be too difficult. Simply rename it to > mpto_old, and create a new mpto which calls mpto_old. If you're using > unix you can use redirection to catch errors/output and append them > to a log file. I have now followed your suggestion and created a file mympto where I put #! /bin/sh echo 'This is my mpto' /usr/local/tex5/bin/mpto $* and in the file texexec.ini, I put set MpToTeXExecutable to mympto Then, mympto is indeed called (as can be shown if I rename mympto into mympto2), but it doesn't change my problem. I really don't think the problem is the line set MpToTeXExecutable ... It has something to do with mpto. But again, if I just call mpost directly it works. For some reason, the current directory used by mpost is different from the one it should be. How could I investigate this in more depth? Thanks, Denis ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-21 21:46 ` Denis B. Roegel @ 2000-10-22 18:49 ` Hans Hagen 0 siblings, 0 replies; 24+ messages in thread From: Hans Hagen @ 2000-10-22 18:49 UTC (permalink / raw) Cc: Marc van Dongen, Denis B. Roegel, NTG-ConTeXt At 11:46 PM 10/21/00 +0200, Denis B. Roegel wrote: >For some reason, the current directory used by mpost >is different from the one it should be. > >How could I investigate this in more depth? you should really use the latest version fo texexec, so that we speak about the latest version, it may have to do with extensions and piping, which i improved recently, i'll make sure and update my version. Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-20 18:56 ` Denis B. Roegel 2000-10-20 19:09 ` Marc van Dongen @ 2000-10-22 18:30 ` Hans Hagen 2000-10-23 19:34 ` Denis B. Roegel 1 sibling, 1 reply; 24+ messages in thread From: Hans Hagen @ 2000-10-22 18:30 UTC (permalink / raw) Cc: Denis B. Roegel, NTG-ConTeXt At 08:56 PM 10/20/00 +0200, Denis B. Roegel wrote: >`Hans Hagen' wrote >> >> >Randomizer initialized to 1119063014. >> > TeXExec 2.2 - ConTeXt / PRAGMA ADE 1997-2000 Isn't version 2.3 in the beta zip? >> > >> > metapost to tex : mpgraph >> >sh: mptotex: not found >> >> Yes, so you have to set MpToTeXExecutable to mpto or comment the line >> mentioned in texexec.ini [maybe you should check your texexec.ini with >> texexec.rme] It really works when set up ok. > >I have done all of this, it doesn't work. Neither commenting the line, >nor removing it. > >What can I do now? > >Maybe if I understand exactly how it works I can try to debug? >texexec calls mpost, which should call mpto. No! MP does not call mpto etc. The reason for this is that (1) this process is too sensitive for problems and (2) some of those tools are sensitive for long lines and so (3) etc etc This is why texexec does the calls after some cleaning up and check. It also makes sure that it uses a temp file that does not clash. >This apparently works since there is no such error as above. >But what I do not understand is why the mpto run fails, because >that's the problem, isn't it? How can I investigate if mpto >is really called and trap it? You can look into texexec [search for doRunMP or ######] and add lines like print "IT WORKS TILL HERE\n" ; inside conditionals to check if you come that far. Also, say texexec --verbose to get an idea of what the settings are. Can be helpful. Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-22 18:30 ` Hans Hagen @ 2000-10-23 19:34 ` Denis B. Roegel 2000-10-24 6:48 ` Hans Hagen 0 siblings, 1 reply; 24+ messages in thread From: Denis B. Roegel @ 2000-10-23 19:34 UTC (permalink / raw) Cc: Denis B. Roegel, NTG-ConTeXt `Hans Hagen' wrote > > Isn't version 2.3 in the beta zip? Ok, I have installed the latest beta and here is the result. There is still no progress. I tested it on solaris and linux. Denis bar context2 242 % texexec --verbose test16 TeXExec 2.3 - ConTeXt / PRAGMA ADE 1997-2000 locating ini file : found by kpsewhich reading : /usr/local/tex5/texmf/context/config/texexec.ini setting : 'TeXShell' to 'tetex' for 'all' setting : 'UsedInterfaces' to 'en,nl,de,uk' for 'all' setting : 'UserInterface' to 'en' for 'all' setting : 'TeXExecutable' to 'tex' for 'all' setting : 'MpExecutable' to 'mpost' for 'all' setting : 'DviToMpExecutable' to 'dvitomp' for 'all' setting : 'DviSpecialScript' to 'dvispec' for 'all' setting : 'UsedInterfaces' to 'en,nl,de,uk' for 'tetex' setting : 'UserInterface' to 'en' for 'tetex' setting : 'TeXExecutable' to 'pdfetex' for 'tetex' used setting : TeXShell = tetex used setting : SetupPath = used setting : UserInterface = en used setting : UsedInterfaces = en,nl,de,uk used setting : TeXFontsPath = . used setting : MpExecutable = mpost used setting : MpToTeXExecutable = mpto used setting : DviToMpExecutable = dvitomp used setting : TeXProgramPath = used setting : TeXFormatPath = used setting : ConTeXtPath = used setting : TeXScriptsPath = used setting : TeXExecutable = pdfetex used setting : TeXVirginFlag = -ini used setting : TeXBatchFlag = -int=batchmode used setting : MpBatchFlag = -int=batchmode used setting : TeXPassString = used setting : TeXFormatFlag = used setting : MpFormatFlag = used setting : MpVirginFlag = -ini used setting : MpPassString = used setting : MpFormat = metafun used setting : FmtLanguage = used setting : FmtBodyFont = used setting : FmtResponse = used setting : TcXPath = locating fmtutil : found executable : pdfetex format : cont-en inputfile : test16 output : standard interface : en options : verbose current mode : all TeX run : 1 pdfetex -progname=context \&cont-en test16 This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) entering extended mode (./test16.tex{/usr/local/tex5/texmf/pdftex/config/pdftex.cfg} ConTeXt ver: 2000.9.21 fmt: 2000.10.5 int: english mes: english language : language en is active system : cont-new loaded (/users/model/roegel/texmf/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! ) system : cont-old loaded (/users/model/roegel/texmf/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/users/model/roegel/texmf/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (./cont-sys.tex) bodyfont : 12pt rm is loaded language : patterns 2-en-2 2-de-2 2-fr-2 2-nl-2 loaded specials : tex,postscript,rokicki loaded system : test16.top loaded (./test16.top) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) (./test16.tuo) systems : begin file test16 at line 1 color : rgb color space is supported color : cmyk color space is supported color : system rgb is global activated layout : calculating backgrounds Randomizer initialized to 1512246597. TeXExec 2.3 - ConTeXt / PRAGMA ADE 1997-2000 metapost to tex : mpgraph executable : pdfetex format : cont-en inputfile : tmpgraph output : dvips interface : en options : once batch nomp current mode : all This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) entering extended mode run time : 2 seconds dvi to metapost : mpgraph metapost : mpgraph format : metafun This is MetaPost, Version 0.641 (Web2C 7.3.2x) figures : figure mpgraph can not be found (./test16.tuo) [1.1] [2.2] systems : end file test16 at line 105 ) Output written on test16.dvi (2 pages, 4744 bytes). Transcript written on test16.log. run time : 5 seconds sorting and checking : running texutil TeXUtil 7.3 - ConTeXt / PRAGMA ADE 1992-2000 action : processing commands, lists and registers option : sorting IJ under Y option : converting high ASCII values input file : test16.tui output file : test16.tuo passed commands : 5 remapped keys : 0 register entries : 0 -> 0 entries 0 references synonym entries : 0 -> 0 entries embedded files : 1 bar context2 243 % ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-23 19:34 ` Denis B. Roegel @ 2000-10-24 6:48 ` Hans Hagen 0 siblings, 0 replies; 24+ messages in thread From: Hans Hagen @ 2000-10-24 6:48 UTC (permalink / raw) Cc: Denis B. Roegel, NTG-ConTeXt At 09:34 PM 10/23/00 +0200, Denis B. Roegel wrote: > > TeXExec 2.3 - ConTeXt / PRAGMA ADE 1997-2000 > > metapost to tex : mpgraph > executable : pdfetex > format : cont-en > inputfile : tmpgraph > output : dvips > interface : en > options : once batch nomp > current mode : all > >This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2C 7.3.2x) >entering extended mode > > run time : 2 seconds > dvi to metapost : mpgraph > metapost : mpgraph > format : metafun >This is MetaPost, Version 0.641 (Web2C 7.3.2x) > >figures : figure mpgraph can not be found >(./test16.tuo) [1.1] [2.2] >systems : end file test16 at line 105 This is the metapost run that also handles btex/etex Can you try texexec --mptex mpgraph and see if some error message shows up? Also, can you send me the tex file you use? Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: texexec not launching mpost 2000-10-20 14:13 ` Denis B. Roegel 2000-10-20 15:59 ` Hans Hagen @ 2000-10-20 17:36 ` Mr. Lei Wang 1 sibling, 0 replies; 24+ messages in thread From: Mr. Lei Wang @ 2000-10-20 17:36 UTC (permalink / raw) Cc: NTG-ConTeXt > > Are you sure you have comment the following line in > > your texexec.ini as I point in my last mail? > > > > for tetex set MpToTeXExecutable to mptotex > > > > Because the context set the MPtoTeXExecutable to "mptotex" > > for teTeX and fpTeX, but teTeX or fpTeX may named this util > > as "mpto". I have experenced the same problem before, so > > I think your problem may be the same. > > I don't think so. I have an mpto executable, but no mptotex. > If I perform your suggested change, I get I really meaning is that I suggest you remove this line in your texexec.ini because the context default use mptotex other than mpto. I am sorry for my poor english. Wang ^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2000-10-31 7:50 UTC | newest] Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <3.0.6.32.20001027113959.0154f7a0@pop.wxs.nl> [not found] ` <200010271431.QAA03427@bar.loria.fr> 2000-10-27 15:55 ` texexec not launching mpost Hans Hagen 2000-10-27 19:20 ` textext problem Denis B. Roegel 2000-10-28 14:24 ` Hans Hagen 2000-10-30 20:21 ` Denis B. Roegel 2000-10-31 7:50 ` Hans Hagen 2000-10-18 21:18 texexec not launching mpost Denis B. Roegel 2000-10-19 3:21 ` Mr. Wang Lei 2000-10-19 9:04 ` Hans Hagen 2000-10-19 11:41 ` Mr. Wang Lei 2000-10-19 13:01 ` Denis B. Roegel 2000-10-19 13:45 ` Hans Hagen 2000-10-19 19:17 ` Denis B. Roegel 2000-10-19 19:30 ` Denis B. Roegel 2000-10-20 2:34 ` Mr. Wang Lei 2000-10-20 14:13 ` Denis B. Roegel 2000-10-20 15:59 ` Hans Hagen 2000-10-20 18:56 ` Denis B. Roegel 2000-10-20 19:09 ` Marc van Dongen 2000-10-21 21:46 ` Denis B. Roegel 2000-10-22 18:49 ` Hans Hagen 2000-10-22 18:30 ` Hans Hagen 2000-10-23 19:34 ` Denis B. Roegel 2000-10-24 6:48 ` Hans Hagen 2000-10-20 17:36 ` Mr. Lei Wang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).