* RE: unicode editor?
@ 2004-07-26 17:34 ishamid
2004-07-27 8:31 ` Hans Hagen
2004-07-27 8:32 ` Mikael Persson
0 siblings, 2 replies; 9+ messages in thread
From: ishamid @ 2004-07-26 17:34 UTC (permalink / raw)
Hi Henning,
>===== Original Message From Henning Hraban Ramm <hraban@fiee.net> =====
>> Hans and others use SciTE. Does it provide Unicode/bidirectional
>> support
>> support?
>
>You can set it up to use UTF-8, but I don't think it supports r-t-l or
>bidi.
That's really too bad:-(( I actually have UniType Global Writer but it's
really a pain to use for TeX source editing. On the other hand, it can be used
to copy and past to WinEdt (where it will show up as utf-8 ascii). An
all-in-one solution would be much better though.
Now I'm a KDE lover myself;-) but doesn't GTK support bidi/rtl? So shouldn't
SciTE support bidi right out of the box?
In any case, I would still like to try SciTE if Hans' support files are
available somewhere. Quick question: how does one activate utf-8?
Best
Idris
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: unicode editor?
2004-07-26 17:34 unicode editor? ishamid
@ 2004-07-27 8:31 ` Hans Hagen
2004-07-27 8:32 ` Mikael Persson
1 sibling, 0 replies; 9+ messages in thread
From: Hans Hagen @ 2004-07-27 8:31 UTC (permalink / raw)
ishamid wrote:
>In any case, I would still like to try SciTE if Hans' support files are
>available somewhere. Quick question: how does one activate utf-8?
>
>
they're in the archive (under context/data)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: unicode editor?
2004-07-26 17:34 unicode editor? ishamid
2004-07-27 8:31 ` Hans Hagen
@ 2004-07-27 8:32 ` Mikael Persson
1 sibling, 0 replies; 9+ messages in thread
From: Mikael Persson @ 2004-07-27 8:32 UTC (permalink / raw)
> Hi Henning,
>
>>===== Original Message From Henning Hraban Ramm <hraban@fiee.net> =====
>>> Hans and others use SciTE. Does it provide Unicode/bidirectional
>>> support
>>> support?
>>
>>You can set it up to use UTF-8, but I don't think it supports r-t-l or
>>bidi.
>
> That's really too bad:-(( I actually have UniType Global Writer but it's
> really a pain to use for TeX source editing. On the other hand, it can be
> used
> to copy and past to WinEdt (where it will show up as utf-8 ascii). An
> all-in-one solution would be much better though.
>
> Now I'm a KDE lover myself;-) but doesn't GTK support bidi/rtl? So
> shouldn't
> SciTE support bidi right out of the box?
>
> In any case, I would still like to try SciTE if Hans' support files are
> available somewhere. Quick question: how does one activate utf-8?
>
> Best
> Idris
Hello Idris,
I think Hans properties file is available in the ConTeXt distribution at
$TEXMF/context/data/context.properties
and the documentation is available in
http://www.pragma-ade.com/general/manuals/mscite.pdf
For utf: Open SciTE, chose Options->Open User Options File and add the line
code.page=65001
to that file.
I don't know what you like, but I have some other things there too:
use.monospaced=1
split.vertical=0
wrap=1
Good luck!
Regards, Micke P
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: unicode editor?
@ 2004-07-26 17:37 ishamid
0 siblings, 0 replies; 9+ messages in thread
From: ishamid @ 2004-07-26 17:37 UTC (permalink / raw)
>What about Mined http://towo.net/mined/ ?
>It's utf-8 and right to left.
>Untested ;).
Drat! it runs from a terminal:-((
Oh well, I'll try it anyway...
Best
Idris
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: unicode editor?
@ 2004-07-26 17:36 ishamid
2004-07-27 8:22 ` Mikael Persson
0 siblings, 1 reply; 9+ messages in thread
From: ishamid @ 2004-07-26 17:36 UTC (permalink / raw)
Thnx 4 this reference; I'll try it!
Best
Idris
>===== Original Message From sebastian.rooks@free.fr =====
>Hello,
>What about Mined http://towo.net/mined/ ?
>It's utf-8 and right to left.
>Untested ;).
^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <41112EAF@webmail.colostate.edu>]
* Re: unicode editor? [please forward]
[not found] <41112EAF@webmail.colostate.edu>
@ 2004-07-26 10:52 ` Giuseppe Bilotta
2004-07-26 16:40 ` unicode editor? sebastian.rooks
0 siblings, 1 reply; 9+ messages in thread
From: Giuseppe Bilotta @ 2004-07-26 10:52 UTC (permalink / raw)
Monday, July 26, 2004 ishamid wrote:
> [for forwarding to the list]
> Dear knights of the round table,
> I generally do my Arabic work in Aleph/eomega in Latin transcription mode, but
> things are at a point now where I would like to code TeX using unicode (and a
> unicode otp filter). Now I use WinEdT and really love it (I even designed
> buttons for for a few functions), but the maintainer has indicated that it
> will be quite some time before WinEdT supports unicode+right-to-left
> typesetting. Are any of you aware of a good multi-platform (thinking of
> switching to Linux again) unicode editor? (and no, at this time I'm not ready
> to spend months (re-)learning/fighting/cursing XEmacs;-> (could never get MULE
> to work anyway...))
I personally use ViM, even though its support for TeX & friends
is very limited.
--
Giuseppe "Oblomov" Bilotta
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: unicode editor?
2004-07-26 10:52 ` unicode editor? [please forward] Giuseppe Bilotta
@ 2004-07-26 16:40 ` sebastian.rooks
2004-07-26 17:40 ` Henning Hraban Ramm
0 siblings, 1 reply; 9+ messages in thread
From: sebastian.rooks @ 2004-07-26 16:40 UTC (permalink / raw)
Hello,
What about Mined http://towo.net/mined/ ?
It's utf-8 and right to left.
Untested ;).
Seb.
Selon Giuseppe Bilotta <gip.bilotta@iol.it>:
> Monday, July 26, 2004 ishamid wrote:
>
> > [for forwarding to the list]
> > Dear knights of the round table,
>
> > I generally do my Arabic work in Aleph/eomega in Latin transcription mode,
> but
> > things are at a point now where I would like to code TeX using unicode (and
> a
> > unicode otp filter). Now I use WinEdT and really love it (I even designed
> > buttons for for a few functions), but the maintainer has indicated that it
> > will be quite some time before WinEdT supports unicode+right-to-left
> > typesetting. Are any of you aware of a good multi-platform (thinking of
> > switching to Linux again) unicode editor? (and no, at this time I'm not
> ready
> > to spend months (re-)learning/fighting/cursing XEmacs;-> (could never get
> MULE
> > to work anyway...))
>
>
> I personally use ViM, even though its support for TeX & friends
> is very limited.
>
> --
> Giuseppe "Oblomov" Bilotta
>
>
>
>
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Fwd: unicode editor? [please forward]]
@ 2004-07-26 8:22 Hans Hagen Outside
2004-07-26 16:11 ` unicode editor? Henning Hraban Ramm
0 siblings, 1 reply; 9+ messages in thread
From: Hans Hagen Outside @ 2004-07-26 8:22 UTC (permalink / raw)
[-- Attachment #1: Type: text/plain, Size: 402 bytes --]
--
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
[-- Attachment #2: unicode editor? [please forward] --]
[-- Type: message/rfc822, Size: 3782 bytes --]
From: ishamid <ishamid@lamar.colostate.edu>
To: Hans Hagen Outside <pragma@wxs.nl>
Subject: unicode editor? [please forward]
Date: Sun, 25 Jul 2004 17:00:10 -0600
Message-ID: <41112EAF@webmail.colostate.edu>
[for forwarding to the list]
Dear knights of the round table,
I generally do my Arabic work in Aleph/eomega in Latin transcription mode, but
things are at a point now where I would like to code TeX using unicode (and a
unicode otp filter). Now I use WinEdT and really love it (I even designed
buttons for for a few functions), but the maintainer has indicated that it
will be quite some time before WinEdT supports unicode+right-to-left
typesetting. Are any of you aware of a good multi-platform (thinking of
switching to Linux again) unicode editor? (and no, at this time I'm not ready
to spend months (re-)learning/fighting/cursing XEmacs;-> (could never get MULE
to work anyway...))
Hans and others use SciTE. Does it provide Unicode/bidirectional support
support?
Any advice would be greatly appreciated! I hate the thought of leaving WinEdT
after so many years but I may have no choice:-(
Best
Idris
================================================================
Deze e-mail is door E-mail VirusScanner van Planet Internet gecontroleerd op virussen.
Op http://www.planet.nl/evs staat een verwijzing naar de actuele lijst waar op wordt gecontroleerd.
[-- Attachment #3: Type: text/plain, Size: 139 bytes --]
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2004-07-27 8:32 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-07-26 17:34 unicode editor? ishamid
2004-07-27 8:31 ` Hans Hagen
2004-07-27 8:32 ` Mikael Persson
-- strict thread matches above, loose matches on Subject: below --
2004-07-26 17:37 ishamid
2004-07-26 17:36 ishamid
2004-07-27 8:22 ` Mikael Persson
[not found] <41112EAF@webmail.colostate.edu>
2004-07-26 10:52 ` unicode editor? [please forward] Giuseppe Bilotta
2004-07-26 16:40 ` unicode editor? sebastian.rooks
2004-07-26 17:40 ` Henning Hraban Ramm
2004-07-26 8:22 [Fwd: unicode editor? [please forward]] Hans Hagen Outside
2004-07-26 16:11 ` unicode editor? Henning Hraban Ramm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).