* Re: Re: Problem running ConTeXt (cont-en.efmt not found..)
[not found] <1060243655.10514.12.camel@JBC.yorkref.com>
@ 2003-08-07 9:38 ` Jules Colding
2003-08-07 10:02 ` Patrick Gundlach
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Jules Colding @ 2003-08-07 9:38 UTC (permalink / raw)
On Thu, 2003-08-07 at 10:07, Jules Colding wrote:
> -----Forwarded Message-----
>
> > From: Patrick Gundlach <pg@levana.de>
> > To: ntg-context@ntg.nl
> > Subject: [NTG-context] Re: Problem running ConTeXt (cont-en.efmt not found..)
> > Date: 06 Aug 2003 21:49:05 +0200
> >
> > Jules Colding <JuBColding@yorkref.com> writes:
> >
> > Hi Jules,
> >
> > > "texexec --make en de dl" command, but that one fails with:
> > >
> > > ################# CUT #####################
> > > TeXExec 3.2 - ConTeXt / PRAGMA ADE 1997-2003
> > >
> > > fmtutil: no info for format `cont-en'.
> > > fmtutil: no info for format `cont-de'.
> > > fmtutil: no info for format `cont-nl'.
> >
> > There are probably two possible ways (I only use the fist alternative)
> >
> > 1) run
> > texexec --make --alone en de dl metafun
> >
> > and copy the resulting efmt and mem files to the appropiate places.
> > (texmf/web2c/)
> >
I did just that, but running texexec on test.tex gives:
#################### CUT ########################
[JuBColding@apollo context]$ texexec test.tex
TeXExec 3.2 - ConTeXt / PRAGMA ADE 1997-2003
executable : pdfetex
format : cont-en
inputfile : test
output : dvips
interface : en
current mode : none
TeX run : 1
This is pdfeTeX, Version 3.14159-14h-released-20010417-2.1 (Web2C
7.3.3.1)
Sorry, I can't find the format `cont-en.efmt'; will try `context.efmt'.
I can't find the format file `context.efmt'!
return code : 256
run time : 1 seconds
total run time : 1 seconds
[JuBColding@apollo context]$
#################### CUT ########################
So, what is wrong with my setup?
Thanks,
jules
> (btw. what is dl?)
dl is just a typo..
--
Jules Colding <JuBColding@yorkref.com>
York Refrigeration
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Problem running ConTeXt (cont-en.efmt not found..)
2003-08-07 9:38 ` Re: Problem running ConTeXt (cont-en.efmt not found..) Jules Colding
@ 2003-08-07 10:02 ` Patrick Gundlach
[not found] ` <m21xvx23bh.fsf@burger.local.>
2003-08-07 17:10 ` darnold
2 siblings, 0 replies; 6+ messages in thread
From: Patrick Gundlach @ 2003-08-07 10:02 UTC (permalink / raw)
Jules Colding <JuBColding@yorkref.com> writes:
Hello again,
>> > 1) run
>> > texexec --make --alone en de dl metafun
>> >
>> > and copy the resulting efmt and mem files to the appropiate places.
>> > (texmf/web2c/)
>> >
>
> I did just that, but running texexec on test.tex gives:
> Sorry, I can't find the format `cont-en.efmt'; will try `context.efmt'.
> I can't find the format file `context.efmt'!
Well, if TeX can't find something it is looking for, run mktexlsr or
texhash in order to update its database.
Verify with kpsewhich:
pg@burger:~$ kpsewhich cont-en.efmt
(in a terminal)
the output should be something like:
/opt/context/2003.7.21/texmf/web2c/cont-en.efmt
Patrick
^ permalink raw reply [flat|nested] 6+ messages in thread[parent not found: <m21xvx23bh.fsf@burger.local.>]
* Re: Re: Problem running ConTeXt (cont-en.efmt not found..)
[not found] ` <m21xvx23bh.fsf@burger.local.>
@ 2003-08-07 11:14 ` Jules Colding
0 siblings, 0 replies; 6+ messages in thread
From: Jules Colding @ 2003-08-07 11:14 UTC (permalink / raw)
On Thu, 2003-08-07 at 12:02, Patrick Gundlach wrote:
> Jules Colding <JuBColding@yorkref.com> writes:
>
> Hello again,
>
> >> > 1) run
> >> > texexec --make --alone en de dl metafun
> >> >
> >> > and copy the resulting efmt and mem files to the appropiate places.
> >> > (texmf/web2c/)
> >> >
> >
> > I did just that, but running texexec on test.tex gives:
>
> > Sorry, I can't find the format `cont-en.efmt'; will try `context.efmt'.
> > I can't find the format file `context.efmt'!
>
> Well, if TeX can't find something it is looking for, run mktexlsr or
> texhash in order to update its database.
Thanks a lot! That worked :-)
--
jules
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: Problem running ConTeXt (cont-en.efmt not found..)
2003-08-07 9:38 ` Re: Problem running ConTeXt (cont-en.efmt not found..) Jules Colding
2003-08-07 10:02 ` Patrick Gundlach
[not found] ` <m21xvx23bh.fsf@burger.local.>
@ 2003-08-07 17:10 ` darnold
2 siblings, 0 replies; 6+ messages in thread
From: darnold @ 2003-08-07 17:10 UTC (permalink / raw)
Jules,
On some systems, when you run texexec --make --alone, the format files are
put automatically in the correct place. On others, they're not. For
example, if you are on:
c:\temp
And you run texexec --make --alone, then the format files might wind up in
c:\temp and you have to manually move them to the correct place (In
Miktex, on my system, that's to c:\localtexmf\miktex\fmt and
c:\localtexmf\miktex\mem. Then you have to refresh the filename database.
Hope this helps.
> On Thu, 2003-08-07 at 10:07, Jules Colding wrote:
>> -----Forwarded Message-----
>>
>> > From: Patrick Gundlach <pg@levana.de>
>> > To: ntg-context@ntg.nl
>> > Subject: [NTG-context] Re: Problem running ConTeXt (cont-en.efmt not
>> found..) Date: 06 Aug 2003 21:49:05 +0200
>> >
>> > Jules Colding <JuBColding@yorkref.com> writes:
>> >
>> > Hi Jules,
>> >
>> > > "texexec --make en de dl" command, but that one fails with:
>> > >
>> > > ################# CUT #####################
>> > > TeXExec 3.2 - ConTeXt / PRAGMA ADE 1997-2003
>> > >
>> > > fmtutil: no info for format `cont-en'.
>> > > fmtutil: no info for format `cont-de'.
>> > > fmtutil: no info for format `cont-nl'.
>> >
>> > There are probably two possible ways (I only use the fist
>> alternative)
>> >
>> > 1) run
>> > texexec --make --alone en de dl metafun
>> >
>> > and copy the resulting efmt and mem files to the appropiate places.
>> (texmf/web2c/)
>> >
>
> I did just that, but running texexec on test.tex gives:
>
> #################### CUT ########################
> [JuBColding@apollo context]$ texexec test.tex
>
> TeXExec 3.2 - ConTeXt / PRAGMA ADE 1997-2003
>
> executable : pdfetex
> format : cont-en
> inputfile : test
> output : dvips
> interface : en
> current mode : none
> TeX run : 1
>
> This is pdfeTeX, Version 3.14159-14h-released-20010417-2.1 (Web2C
> 7.3.3.1)
> Sorry, I can't find the format `cont-en.efmt'; will try `context.efmt'.
> I can't find the format file `context.efmt'!
>
> return code : 256
> run time : 1 seconds
>
> total run time : 1 seconds
> [JuBColding@apollo context]$
> #################### CUT ########################
>
> So, what is wrong with my setup?
>
>
> Thanks,
> jules
>
>> (btw. what is dl?)
>
> dl is just a typo..
>
> --
> Jules Colding <JuBColding@yorkref.com>
> York Refrigeration
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 6+ messages in thread
* Problem running ConTeXt (cont-en.efmt not found..)
@ 2003-08-06 10:58 Jules Colding
2003-08-06 19:49 ` Patrick Gundlach
0 siblings, 1 reply; 6+ messages in thread
From: Jules Colding @ 2003-08-06 10:58 UTC (permalink / raw)
Hi,
I just unzipped "cont-tmf.zip" in the /usr/share/texmf directory on a
rh9.
Now, the problem is that texexec can't find the cont-en.efmt or the
context.efmt files. How are these generated? I have tried to issue a
"texexec --make en de dl" command, but that one fails with:
################# CUT #####################
TeXExec 3.2 - ConTeXt / PRAGMA ADE 1997-2003
fmtutil: no info for format `cont-en'.
fmtutil: no info for format `cont-de'.
fmtutil: no info for format `cont-nl'.
TeX binary : pdfetex
format(s) : en de nl
total run time : 3 seconds
################# CUT #####################
Thanks in advance,
jules
--
Jules Colding <JuBColding@yorkref.com>
York Refrigeration
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Problem running ConTeXt (cont-en.efmt not found..)
2003-08-06 10:58 Jules Colding
@ 2003-08-06 19:49 ` Patrick Gundlach
0 siblings, 0 replies; 6+ messages in thread
From: Patrick Gundlach @ 2003-08-06 19:49 UTC (permalink / raw)
Jules Colding <JuBColding@yorkref.com> writes:
Hi Jules,
> "texexec --make en de dl" command, but that one fails with:
>
> ################# CUT #####################
> TeXExec 3.2 - ConTeXt / PRAGMA ADE 1997-2003
>
> fmtutil: no info for format `cont-en'.
> fmtutil: no info for format `cont-de'.
> fmtutil: no info for format `cont-nl'.
There are probably two possible ways (I only use the fist alternative)
1) run
texexec --make --alone en de dl metafun
and copy the resulting efmt and mem files to the appropiate places.
(texmf/web2c/)
(btw. what is dl?)
2) edit the "fmtutil" helper file (fmtutil --edit) and uncomment the
cont-en ... lines and run texexec --make ... again.
Patrick
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-08-07 17:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1060243655.10514.12.camel@JBC.yorkref.com>
2003-08-07 9:38 ` Re: Problem running ConTeXt (cont-en.efmt not found..) Jules Colding
2003-08-07 10:02 ` Patrick Gundlach
[not found] ` <m21xvx23bh.fsf@burger.local.>
2003-08-07 11:14 ` Jules Colding
2003-08-07 17:10 ` darnold
2003-08-06 10:58 Jules Colding
2003-08-06 19:49 ` Patrick Gundlach
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).