* \getscaledglyph for width-only
@ 2016-08-17 19:56 Brian R. Landy
2016-08-17 21:45 ` Hans Hagen
0 siblings, 1 reply; 7+ messages in thread
From: Brian R. Landy @ 2016-08-17 19:56 UTC (permalink / raw)
To: ntg-context
Hi, I was wondering if there is a way to call \getscaledglyph to scale a
glyph only horizontally, leaving the height untouched? Or maybe an
alternate command?
I can sort of accomplish this with (for example)
\scale[sx=0.75,sy=1.0]{}{A}, but that encloses the glyph in an \hbox,
which can be problematic. \getscaledglyph doesn't cause me any
problems, except that it scales the height too.
Thanks!
Best regards,
Brian
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \getscaledglyph for width-only
2016-08-17 19:56 \getscaledglyph for width-only Brian R. Landy
@ 2016-08-17 21:45 ` Hans Hagen
2016-08-17 23:12 ` Brian R. Landy
0 siblings, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2016-08-17 21:45 UTC (permalink / raw)
To: ntg-context
On 8/17/2016 9:56 PM, Brian R. Landy wrote:
> Hi, I was wondering if there is a way to call \getscaledglyph to scale a
> glyph only horizontally, leaving the height untouched? Or maybe an
> alternate command?
>
> I can sort of accomplish this with (for example)
> \scale[sx=0.75,sy=1.0]{}{A}, but that encloses the glyph in an \hbox,
> which can be problematic. \getscaledglyph doesn't cause me any
> problems, except that it scales the height too.
\starttext
\definefontfeature[whatever][default][extend=2.5]
\definedfont[Serif*whatever at 12pt]
whatever
\stoptext
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \getscaledglyph for width-only
2016-08-17 21:45 ` Hans Hagen
@ 2016-08-17 23:12 ` Brian R. Landy
2016-08-18 8:20 ` Hans Hagen
0 siblings, 1 reply; 7+ messages in thread
From: Brian R. Landy @ 2016-08-17 23:12 UTC (permalink / raw)
To: mailing list for ConTeXt users
> On Aug 17, 2016, at 5:45 PM, Hans Hagen <pragma@wxs.nl> wrote:
>
> On 8/17/2016 9:56 PM, Brian R. Landy wrote:
>> Hi, I was wondering if there is a way to call \getscaledglyph to scale a
>> glyph only horizontally, leaving the height untouched? Or maybe an
>> alternate command?
>>
>> I can sort of accomplish this with (for example)
>> \scale[sx=0.75,sy=1.0]{}{A}, but that encloses the glyph in an \hbox,
>> which can be problematic. \getscaledglyph doesn't cause me any
>> problems, except that it scales the height too.
>
> \starttext
>
> \definefontfeature[whatever][default][extend=2.5]
>
> \definedfont[Serif*whatever at 12pt]
>
> whatever
>
> \stoptext
>
Thank you. One thing that \getscaledglyph does it works agnostic to the currently selected font. For example:
\starttext
% This will print a sans “A” 1.5x larger than 12pt
\switchtobodyfont[12pt,sans]
\getscaledglyph{1.5}{}{A}\par
% This will print a serif “A” 1.5x larger than 10pt
\switchtobodyfont[10pt,serif]
\getscaledglyph{1.5}{}{A}\par
\stoptext
I’m guessing there isn’t a way to use \definedfont in a similar fashion?
Also, I noticed that \definedfont doesn’t seem to play nicely with \switchtobodyfont:
\starttext
\definefontfeature[whatever][default][extend=2.5]
% This looks ok
\switchtobodyfont[12pt,serif]
{\definedfont[Serif*whatever at 12pt] what}ever\par
% the “ever” is not printed properly, it overlaps itself
\switchtobodyfont[10pt,serif]
{\definedfont[Serif*whatever at 10pt] what}ever\par
\stoptext
Best,
Brian
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \getscaledglyph for width-only
2016-08-17 23:12 ` Brian R. Landy
@ 2016-08-18 8:20 ` Hans Hagen
2016-08-18 16:30 ` Brian R. Landy
0 siblings, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2016-08-18 8:20 UTC (permalink / raw)
To: ntg-context
On 8/18/2016 1:12 AM, Brian R. Landy wrote:
>
>> On Aug 17, 2016, at 5:45 PM, Hans Hagen <pragma@wxs.nl> wrote:
>>
>> On 8/17/2016 9:56 PM, Brian R. Landy wrote:
>>> Hi, I was wondering if there is a way to call \getscaledglyph to scale a
>>> glyph only horizontally, leaving the height untouched? Or maybe an
>>> alternate command?
>>>
>>> I can sort of accomplish this with (for example)
>>> \scale[sx=0.75,sy=1.0]{}{A}, but that encloses the glyph in an \hbox,
>>> which can be problematic. \getscaledglyph doesn't cause me any
>>> problems, except that it scales the height too.
>>
>> \starttext
>>
>> \definefontfeature[whatever][default][extend=2.5]
>>
>> \definedfont[Serif*whatever at 12pt]
>>
>> whatever
>>
>> \stoptext
>>
>
> Thank you. One thing that \getscaledglyph does it works agnostic to the currently selected font. For example:
scaling glyphs in one direction is kind of bad anyway so if you want
just one glyph you can do
\inframed{\scale[width=3em,height=1ex]{...}}
or whatever suits the purpose
> \starttext
>
> % This will print a sans “A” 1.5x larger than 12pt
> \switchtobodyfont[12pt,sans]
> \getscaledglyph{1.5}{}{A}\par
>
> % This will print a serif “A” 1.5x larger than 10pt
> \switchtobodyfont[10pt,serif]
> \getscaledglyph{1.5}{}{A}\par
>
> \stoptext
>
> I’m guessing there isn’t a way to use \definedfont in a similar fashion?
\definedfont[Serif*whatever sa 1.5]
>
> Also, I noticed that \definedfont doesn’t seem to play nicely with \switchtobodyfont:
>
> \starttext
>
> \definefontfeature[whatever][default][extend=2.5]
>
> % This looks ok
> \switchtobodyfont[12pt,serif]
> {\definedfont[Serif*whatever at 12pt] what}ever\par
>
> % the “ever” is not printed properly, it overlaps itself
> \switchtobodyfont[10pt,serif]
> {\definedfont[Serif*whatever at 10pt] what}ever\par
>
> \stoptext
>
> Best,
> Brian
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
--
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \getscaledglyph for width-only
2016-08-18 8:20 ` Hans Hagen
@ 2016-08-18 16:30 ` Brian R. Landy
2016-08-18 22:11 ` Hans Hagen
2016-08-20 11:53 ` Hans Hagen
0 siblings, 2 replies; 7+ messages in thread
From: Brian R. Landy @ 2016-08-18 16:30 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Thu, 18 Aug 2016, Hans Hagen wrote:
> On 8/18/2016 1:12 AM, Brian R. Landy wrote:
>>
>>> On Aug 17, 2016, at 5:45 PM, Hans Hagen <pragma@wxs.nl> wrote:
>>>
>>> On 8/17/2016 9:56 PM, Brian R. Landy wrote:
>>>> Hi, I was wondering if there is a way to call \getscaledglyph to
>>>> scale a
>>>> glyph only horizontally, leaving the height untouched? Or maybe an
>>>> alternate command?
>>>>
>>>> I can sort of accomplish this with (for example)
>>>> \scale[sx=0.75,sy=1.0]{}{A}, but that encloses the glyph in an
>>>> \hbox,
>>>> which can be problematic. \getscaledglyph doesn't cause me any
>>>> problems, except that it scales the height too.
>>>
>>> \starttext
>>>
>>> \definefontfeature[whatever][default][extend=2.5]
>>>
>>> \definedfont[Serif*whatever at 12pt]
>>>
>>> whatever
>>>
>>> \stoptext
>>>
>>
>> Thank you. One thing that \getscaledglyph does it works agnostic to
>> the currently selected font. For example:
>
> scaling glyphs in one direction is kind of bad anyway so if you want
> just one glyph you can do
>
> \inframed{\scale[width=3em,height=1ex]{...}}
>
> or whatever suits the purpose
Agreed. Here's a little more background, so it makes some sense why I
want to scale horizontally, and then I describe my final solution. I
have a specific case where I use a minus, a hyphen-minus, and a plus
close to each other, and it's always bugged me that most fonts don't
vertically align the hyphen-minus with the other two glyphs. An example
is:
{\normalUchar"2212}100-00+
I was thinking that math fonts did align these symbols, hence my
question on Monday on how to get the hyphen-minus in math mode (and
thanks for the quick answer on that) but unfortunately was wrong. So
that got me searching for a way to horizontally shrink a minus, so it
would retain the same height and line thickness as the minus.
Horizontal-only scaling of a hyphen/dash/minus isn't so bad.
\scaled[] worked perfectly, but it breaks inside a natural table with
character alignment enabled. I have a commented example of this below.
\getscaledglyph works in the table, but the vertical shrink is a
non-starter.
Here's an example:
\edef\mathminus{\normalUchar"2212}
\edef\smallminus{\getscaledglyph{0.33}{}{\normalUchar"2212}}
\starttext
This is my starting point:
\bTABLE[aligncharacter=yes,alignmentcharacter={text->-}]
\bTR \bTD \mathminus100-00+ \eTD \eTR
\bTR \bTD 100-00 \eTD \eTR
\bTR \bTD \mathminus 99-00+ \eTD \eTR
\bTR \bTD \mathminus 99-00 \eTD \eTR
\eTABLE
% This table won't typeset:
%
% \bTABLE[aligncharacter=yes,alignmentcharacter={text->:}]
% \bTR \bTD \mathminus100\scaled[sx=0.5,sy=1.0]{\mathminus}00:+ \eTD \eTR
% \bTR \bTD 100\scaled[sx=0.5,sy=1.0]{\mathminus}00: \eTD \eTR
% \bTR \bTD \mathminus 99\scaled[sx=0.5,sy=1.0]{\mathminus}00:+ \eTD \eTR
% \bTR \bTD \mathminus 99\scaled[sx=0.5,sy=1.0]{\mathminus}00: \eTD \eTR
% \eTABLE
\stoptext
But I came up with a solution that works. Rather than attempt to shrink
the minus glyph, I define a new glyph that corrects the height of the
hyphen-minus:
\startluacode
local function addsmallminus(tfmdata)
local hchar = tfmdata.characters[0x002D]
local mchar = tfmdata.characters[0x2212]
tfmdata.characters[0xFE000] = {
width = hchar.width,
height = mchar.height,
commands = {
{ "down", hchar.height-mchar.height },
{ "char", 0x002D },
}
}
end
fonts.constructors.newfeatures("otf").register {
name = "smallminus",
description = "small minus",
manipulators = {
base = addsmallminus,
node = addsmallminus,
}
}
\stopluacode
\definefontfeature[default][default][smallminus=yes]
\edef\smallminus{\normalUchar"FE000}
\starttext
\bTABLE[aligncharacter=yes,alignmentcharacter={text->\smallminus}]
\bTR \bTD \mathminus100\smallminus00+ \eTD \eTR
\bTR \bTD 100\smallminus00 \eTD \eTR
\bTR \bTD \mathminus 99\smallminus00+ \eTD \eTR
\bTR \bTD \mathminus 99\smallminus00 \eTD \eTR
\eTABLE
\stoptext
So this looks good and works with any font. The only issue is fonts
that use a different line thickness for the minus and hyphen-minus; this
top-aligns the glyphs.
Is there a way to make this glyph available in math-mode? I get a "?"
when I try:
\math{\smallminus}
\math{\mathchar"FE000}
Thanks for all your help!
Brian
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \getscaledglyph for width-only
2016-08-18 16:30 ` Brian R. Landy
@ 2016-08-18 22:11 ` Hans Hagen
2016-08-20 11:53 ` Hans Hagen
1 sibling, 0 replies; 7+ messages in thread
From: Hans Hagen @ 2016-08-18 22:11 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 8/18/2016 6:30 PM, Brian R. Landy wrote:
>
>
> On Thu, 18 Aug 2016, Hans Hagen wrote:
>
>> On 8/18/2016 1:12 AM, Brian R. Landy wrote:
>>>
>>>> On Aug 17, 2016, at 5:45 PM, Hans Hagen <pragma@wxs.nl> wrote:
>>>>
>>>> On 8/17/2016 9:56 PM, Brian R. Landy wrote:
>>>>> Hi, I was wondering if there is a way to call \getscaledglyph to
>>>>> scale a
>>>>> glyph only horizontally, leaving the height untouched? Or maybe an
>>>>> alternate command?
>>>>>
>>>>> I can sort of accomplish this with (for example)
>>>>> \scale[sx=0.75,sy=1.0]{}{A}, but that encloses the glyph in an \hbox,
>>>>> which can be problematic. \getscaledglyph doesn't cause me any
>>>>> problems, except that it scales the height too.
>>>>
>>>> \starttext
>>>>
>>>> \definefontfeature[whatever][default][extend=2.5]
>>>>
>>>> \definedfont[Serif*whatever at 12pt]
>>>>
>>>> whatever
>>>>
>>>> \stoptext
>>>>
>>>
>>> Thank you. One thing that \getscaledglyph does it works agnostic to
>>> the currently selected font. For example:
>>
>> scaling glyphs in one direction is kind of bad anyway so if you want
>> just one glyph you can do
>>
>> \inframed{\scale[width=3em,height=1ex]{...}}
>>
>> or whatever suits the purpose
>
> Agreed. Here's a little more background, so it makes some sense why I
> want to scale horizontally, and then I describe my final solution. I
> have a specific case where I use a minus, a hyphen-minus, and a plus
> close to each other, and it's always bugged me that most fonts don't
> vertically align the hyphen-minus with the other two glyphs. An example is:
>
> {\normalUchar"2212}100-00+
>
> I was thinking that math fonts did align these symbols, hence my
> question on Monday on how to get the hyphen-minus in math mode (and
> thanks for the quick answer on that) but unfortunately was wrong. So
> that got me searching for a way to horizontally shrink a minus, so it
> would retain the same height and line thickness as the minus.
> Horizontal-only scaling of a hyphen/dash/minus isn't so bad.
>
> \scaled[] worked perfectly, but it breaks inside a natural table with
> character alignment enabled. I have a commented example of this below.
> \getscaledglyph works in the table, but the vertical shrink is a
> non-starter.
>
> Here's an example:
>
> \edef\mathminus{\normalUchar"2212}
> \edef\smallminus{\getscaledglyph{0.33}{}{\normalUchar"2212}}
> \starttext
>
> This is my starting point:
>
> \bTABLE[aligncharacter=yes,alignmentcharacter={text->-}]
> \bTR \bTD \mathminus100-00+ \eTD \eTR
> \bTR \bTD 100-00 \eTD \eTR
> \bTR \bTD \mathminus 99-00+ \eTD \eTR
> \bTR \bTD \mathminus 99-00 \eTD \eTR
> \eTABLE
>
> % This table won't typeset:
> %
> % \bTABLE[aligncharacter=yes,alignmentcharacter={text->:}]
> % \bTR \bTD \mathminus100\scaled[sx=0.5,sy=1.0]{\mathminus}00:+ \eTD \eTR
> % \bTR \bTD 100\scaled[sx=0.5,sy=1.0]{\mathminus}00: \eTD \eTR
> % \bTR \bTD \mathminus 99\scaled[sx=0.5,sy=1.0]{\mathminus}00:+ \eTD \eTR
> % \bTR \bTD \mathminus 99\scaled[sx=0.5,sy=1.0]{\mathminus}00: \eTD \eTR
> % \eTABLE
>
> \stoptext
>
> But I came up with a solution that works. Rather than attempt to shrink
> the minus glyph, I define a new glyph that corrects the height of the
> hyphen-minus:
>
> \startluacode
> local function addsmallminus(tfmdata)
> local hchar = tfmdata.characters[0x002D]
> local mchar = tfmdata.characters[0x2212]
> tfmdata.characters[0xFE000] = {
> width = hchar.width,
> height = mchar.height,
> commands = {
> { "down", hchar.height-mchar.height },
> { "char", 0x002D },
> }
> }
> end
>
> fonts.constructors.newfeatures("otf").register {
> name = "smallminus",
> description = "small minus",
> manipulators = {
> base = addsmallminus,
> node = addsmallminus,
> }
> }
>
> \stopluacode
>
> \definefontfeature[default][default][smallminus=yes]
> \edef\smallminus{\normalUchar"FE000}
>
> \starttext
>
> \bTABLE[aligncharacter=yes,alignmentcharacter={text->\smallminus}]
> \bTR \bTD \mathminus100\smallminus00+ \eTD \eTR
> \bTR \bTD 100\smallminus00 \eTD \eTR
> \bTR \bTD \mathminus 99\smallminus00+ \eTD \eTR
> \bTR \bTD \mathminus 99\smallminus00 \eTD \eTR
> \eTABLE
>
> \stoptext
>
> So this looks good and works with any font. The only issue is fonts
> that use a different line thickness for the minus and hyphen-minus; this
> top-aligns the glyphs.
>
> Is there a way to make this glyph available in math-mode? I get a "?"
> when I try:
method 1:
\definefontfeature[math-text] [math-text] [smallminus=yes]
\definefontfeature[math-script] [math-script] [smallminus=yes]
\definefontfeature[math-scriptscript] [math-scriptscript] [smallminus=yes]
method 2: (no need to adapt features)
name = "smallminus",
description = "small minus",
default = true,
> \math{\smallminus}
> \math{\mathchar"FE000}
>
> Thanks for all your help!
>
>
> Brian
> ___________________________________________________________________________________
>
> If your question is of interest to others as well, please add an entry
> to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
--
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \getscaledglyph for width-only
2016-08-18 16:30 ` Brian R. Landy
2016-08-18 22:11 ` Hans Hagen
@ 2016-08-20 11:53 ` Hans Hagen
1 sibling, 0 replies; 7+ messages in thread
From: Hans Hagen @ 2016-08-20 11:53 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 8/18/2016 6:30 PM, Brian R. Landy wrote:
>
>
> On Thu, 18 Aug 2016, Hans Hagen wrote:
>
>> On 8/18/2016 1:12 AM, Brian R. Landy wrote:
>>>
>>>> On Aug 17, 2016, at 5:45 PM, Hans Hagen <pragma@wxs.nl> wrote:
>>>>
>>>> On 8/17/2016 9:56 PM, Brian R. Landy wrote:
>>>>> Hi, I was wondering if there is a way to call \getscaledglyph to
>>>>> scale a
>>>>> glyph only horizontally, leaving the height untouched? Or maybe an
>>>>> alternate command?
>>>>>
>>>>> I can sort of accomplish this with (for example)
>>>>> \scale[sx=0.75,sy=1.0]{}{A}, but that encloses the glyph in an \hbox,
>>>>> which can be problematic. \getscaledglyph doesn't cause me any
>>>>> problems, except that it scales the height too.
>>>>
>>>> \starttext
>>>>
>>>> \definefontfeature[whatever][default][extend=2.5]
>>>>
>>>> \definedfont[Serif*whatever at 12pt]
>>>>
>>>> whatever
>>>>
>>>> \stoptext
>>>>
>>>
>>> Thank you. One thing that \getscaledglyph does it works agnostic to
>>> the currently selected font. For example:
>>
>> scaling glyphs in one direction is kind of bad anyway so if you want
>> just one glyph you can do
>>
>> \inframed{\scale[width=3em,height=1ex]{...}}
>>
>> or whatever suits the purpose
>
> Agreed. Here's a little more background, so it makes some sense why I
> want to scale horizontally, and then I describe my final solution. I
> have a specific case where I use a minus, a hyphen-minus, and a plus
> close to each other, and it's always bugged me that most fonts don't
> vertically align the hyphen-minus with the other two glyphs. An example is:
>
> {\normalUchar"2212}100-00+
>
> I was thinking that math fonts did align these symbols, hence my
> question on Monday on how to get the hyphen-minus in math mode (and
> thanks for the quick answer on that) but unfortunately was wrong. So
> that got me searching for a way to horizontally shrink a minus, so it
> would retain the same height and line thickness as the minus.
> Horizontal-only scaling of a hyphen/dash/minus isn't so bad.
>
> \scaled[] worked perfectly, but it breaks inside a natural table with
> character alignment enabled. I have a commented example of this below.
> \getscaledglyph works in the table, but the vertical shrink is a
> non-starter.
>
> Here's an example:
>
> \edef\mathminus{\normalUchar"2212}
> \edef\smallminus{\getscaledglyph{0.33}{}{\normalUchar"2212}}
> \starttext
>
> This is my starting point:
>
> \bTABLE[aligncharacter=yes,alignmentcharacter={text->-}]
> \bTR \bTD \mathminus100-00+ \eTD \eTR
> \bTR \bTD 100-00 \eTD \eTR
> \bTR \bTD \mathminus 99-00+ \eTD \eTR
> \bTR \bTD \mathminus 99-00 \eTD \eTR
> \eTABLE
>
> % This table won't typeset:
> %
> % \bTABLE[aligncharacter=yes,alignmentcharacter={text->:}]
> % \bTR \bTD \mathminus100\scaled[sx=0.5,sy=1.0]{\mathminus}00:+ \eTD \eTR
> % \bTR \bTD 100\scaled[sx=0.5,sy=1.0]{\mathminus}00: \eTD \eTR
> % \bTR \bTD \mathminus 99\scaled[sx=0.5,sy=1.0]{\mathminus}00:+ \eTD \eTR
> % \bTR \bTD \mathminus 99\scaled[sx=0.5,sy=1.0]{\mathminus}00: \eTD \eTR
> % \eTABLE
>
> \stoptext
>
> But I came up with a solution that works. Rather than attempt to shrink
> the minus glyph, I define a new glyph that corrects the height of the
> hyphen-minus:
>
> \startluacode
> local function addsmallminus(tfmdata)
> local hchar = tfmdata.characters[0x002D]
> local mchar = tfmdata.characters[0x2212]
> tfmdata.characters[0xFE000] = {
> width = hchar.width,
> height = mchar.height,
> commands = {
> { "down", hchar.height-mchar.height },
> { "char", 0x002D },
> }
> }
> end
>
> fonts.constructors.newfeatures("otf").register {
> name = "smallminus",
> description = "small minus",
> manipulators = {
> base = addsmallminus,
> node = addsmallminus,
> }
> }
>
> \stopluacode
>
> \definefontfeature[default][default][smallminus=yes]
> \edef\smallminus{\normalUchar"FE000}
>
> \starttext
>
> \bTABLE[aligncharacter=yes,alignmentcharacter={text->\smallminus}]
> \bTR \bTD \mathminus100\smallminus00+ \eTD \eTR
> \bTR \bTD 100\smallminus00 \eTD \eTR
> \bTR \bTD \mathminus 99\smallminus00+ \eTD \eTR
> \bTR \bTD \mathminus 99\smallminus00 \eTD \eTR
> \eTABLE
>
> \stoptext
>
> So this looks good and works with any font. The only issue is fonts
> that use a different line thickness for the minus and hyphen-minus; this
> top-aligns the glyphs.
>
> Is there a way to make this glyph available in math-mode? I get a "?"
> when I try:
>
> \math{\smallminus}
> \math{\mathchar"FE000}
>
> Thanks for all your help!
One problem with your approach is that you can never know if that
private slot isn't already used. This can be avoided with
\startluacode
local function addsmallminus(tfmdata)
local hchar = tfmdata.characters[0x002D]
local mchar = tfmdata.characters[0x2212]
if hchar and mchar then
fonts.helpers.addprivate(tfmdata, "smallminus", {
width = hchar.width,
height = mchar.height,
commands = {
{ "down", hchar.height - mchar.height },
{ "char", 0x002D },
}
})
end
end
fonts.constructors.newfeatures.otf.register {
name = "smallminus",
description = "small minus",
default = true,
manipulators = {
base = addsmallminus,
node = addsmallminus,
}
}
\stopluacode
The default set to true makes that you don't need to do:
% \definefontfeature[default] [default] [smallminus=yes]
% \definefontfeature[math-text] [math-text] [smallminus=yes]
% \definefontfeature[math-script] [math-script] [smallminus=yes]
% \definefontfeature[math-scriptscript] [math-scriptscript] [smallminus=yes]
and using \privatechar{smallminus} instead. Originally these privates
were for internal (housekeeping and reporting) use only but i made it a
bit more general. But to make it more convenient and to avoid too many
such features added I'll provide
fonts.helpers.addextraprivate("smallminus", function(tfmdata)
local hchar = tfmdata.characters[0x002D]
local mchar = tfmdata.characters[0x2212]
if hchar and mchar then
return {
width = hchar.width,
height = mchar.height,
commands = {
{ "down", hchar.height - mchar.height },
{ "char", 0x002D },
}
}
end
end)
hooked into the enabled-by-default feature "extraprivates" (maybe i'll
add a method to change these global defaults of features).
The catch with these private characters in math mode is that in math
mode there is not really a font but families that represent sizes that
are bound to fonts, so it's more indirect. This is why a hard coded
number can fail as these private numbers can differ per font. But this
works:
\def\smallminus{\privatechar{smallminus}}
\starttext
\bTABLE[aligncharacter=yes,alignmentcharacter={text->\smallminus}]
\bTR \bTD \mathminus100\smallminus00+ \eTD \eTR
\bTR \bTD 100\smallminus00 \eTD \eTR
\bTR \bTD \mathminus 99\smallminus00+ \eTD \eTR
\bTR \bTD \mathminus 99\smallminus00 \eTD \eTR
\eTABLE
[\getprivateslot{smallminus}]
[\getprivatechar{smallminus}]
$[\smallminus]$
\stoptext
Because \privatechar in text mode will expand to an utf (so in your case
the same font is assumes because you need the slots to be the same for
the alignment check; I might decide to share private code points for
that purpose). In math mode you will get the right character too.
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-08-20 11:53 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-17 19:56 \getscaledglyph for width-only Brian R. Landy
2016-08-17 21:45 ` Hans Hagen
2016-08-17 23:12 ` Brian R. Landy
2016-08-18 8:20 ` Hans Hagen
2016-08-18 16:30 ` Brian R. Landy
2016-08-18 22:11 ` Hans Hagen
2016-08-20 11:53 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).