* Layers don't repeat in Mk IV
@ 2009-08-04 16:52 Derek CORDEIRO
2009-08-04 21:13 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Derek CORDEIRO @ 2009-08-04 16:52 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 586 bytes --]
I've been trying to use layers for a simple logo that repeats on all pages.
Something along the lines of the code below:
\definelayer[mybg][x=0mm, y=0mm,width=\paperwidth,
height=\paperheight,repeat=yes]
\setlayer [mybg]
[hoffset=1cm, voffset=1cm]
{\framed[frame=on, width=3cm,
height=2cm]{\externalfigure[cow][width=1cm]
}}
\setupbackgrounds[page][background=mybg]
\starttext
\dorecurse{6}{\input tufte\par}
\stoptext
It works as expected using Mk II but does not work under Mk IV: The layer
appears only on the first page.
Please Help,
Derek
[-- Attachment #1.2: Type: text/html, Size: 696 bytes --]
[-- Attachment #2: Type: text/plain, Size: 487 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Layers don't repeat in Mk IV
2009-08-04 16:52 Layers don't repeat in Mk IV Derek CORDEIRO
@ 2009-08-04 21:13 ` Wolfgang Schuster
2009-08-05 8:47 ` Derek CORDEIRO
0 siblings, 1 reply; 6+ messages in thread
From: Wolfgang Schuster @ 2009-08-04 21:13 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 04.08.2009 um 18:52 schrieb Derek CORDEIRO:
> I've been trying to use layers for a simple logo that repeats on all
> pages. Something along the lines of the code below:
>
> \definelayer[mybg][x=0mm, y=0mm,width=\paperwidth, height=
> \paperheight,repeat=yes]
\definelayer[mybg][width=\paperwidth,height=\paperheight,state=repeat]
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Layers don't repeat in Mk IV
2009-08-04 21:13 ` Wolfgang Schuster
@ 2009-08-05 8:47 ` Derek CORDEIRO
2009-08-05 9:15 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Derek CORDEIRO @ 2009-08-05 8:47 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 764 bytes --]
On Wed, Aug 5, 2009 at 2:43 AM, Wolfgang Schuster <
schuster.wolfgang@googlemail.com> wrote:
> \definelayer[mybg][width=\paperwidth,height=\paperheight,state=repeat]
>
My file now contains:
--------------------------------------------------------------------------------------------------------------
\definelayer[mybg][width=\paperwidth,height=\paperheight,state=repeat]
\setlayer [mybg]
[hoffset=1cm, voffset=1cm]
{\framed[frame=on, width=3cm,
height=2cm]{\externalfigure[cow][width=1cm]
}}
\setupbackgrounds[page][background=mybg]
\starttext
\dorecurse{6}{\input tufte\par}
\stoptext
It still does not work(still layer only on first page in Mk IV). What am I
doing wrong?
ConTeXt log at http://pastebin.com/m3d676b5a
With Thanks,
Derek
[-- Attachment #1.2: Type: text/html, Size: 1203 bytes --]
[-- Attachment #2: Type: text/plain, Size: 487 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Layers don't repeat in Mk IV
2009-08-05 8:47 ` Derek CORDEIRO
@ 2009-08-05 9:15 ` Wolfgang Schuster
2009-08-05 9:27 ` Derek CORDEIRO
2009-08-06 19:48 ` Hans Hagen
0 siblings, 2 replies; 6+ messages in thread
From: Wolfgang Schuster @ 2009-08-05 9:15 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Hans Hagen
Am 05.08.2009 um 10:47 schrieb Derek CORDEIRO:
> \definelayer[mybg][width=\paperwidth,height=\paperheight,state=repeat]
> \setlayer [mybg]
> [hoffset=1cm, voffset=1cm]
> {\framed[frame=on, width=3cm, height=2cm]
> {\externalfigure[cow][width=1cm]
> }}
> \setupbackgrounds[page][background=mybg]
>
> \starttext
> \dorecurse{6}{\input tufte\par}
> \stoptext
>
> It still does not work(still layer only on first page in Mk IV).
> What am I doing wrong?
A typo in pack-lyr.mkiv for the \dodoflushlayer macro.
In MkII a line of the macro is
\doifnotvalue{\??ll#2\c!position}\v!yes
{\doifvalue{\??ll#2\c!repeat}\v!yes\!!donecfalse
\doifvalue{\??ll#2\c!state}\v!repeat\!!donecfalse}%
while in MkIV it's
\ifx\@@currentlayerposition\v!yes
\edef\@@currentlayerrepeat{\csname\??ll\currentlayer\c!repeat
\endcsname}%
% \edef\@@currentlayerstate {\csname\??ll\currentlayer\c!state
\endcsname}% actually this is already set
\ifx\@@currentlayerrepeat\v!yes
\!!donecfalse
\else\ifx\@@currentlayerstate\v!repeat
\!!donecfalse
\fi\fi
\fi
MkII expects position ≠ yes while MkIV continues only when position =
yes
what's wrong, you can add \unless before the \ifx and the layer
mechanism works.
\unless\ifx\@@currentlayerposition\v!yes
\edef\@@currentlayerrepeat{\csname\??ll\currentlayer\c!repeat
\endcsname}%
% \edef\@@currentlayerstate {\csname\??ll\currentlayer\c!state
\endcsname}% actually this is already set
\ifx\@@currentlayerrepeat\v!yes
\!!donecfalse
\else\ifx\@@currentlayerstate\v!repeat
\!!donecfalse
\fi\fi
\fi
\fi
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Layers don't repeat in Mk IV
2009-08-05 9:15 ` Wolfgang Schuster
@ 2009-08-05 9:27 ` Derek CORDEIRO
2009-08-06 19:48 ` Hans Hagen
1 sibling, 0 replies; 6+ messages in thread
From: Derek CORDEIRO @ 2009-08-05 9:27 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1951 bytes --]
On Wed, Aug 5, 2009 at 2:45 PM, Wolfgang Schuster <
schuster.wolfgang@googlemail.com> wrote:
>
> Am 05.08.2009 um 10:47 schrieb Derek CORDEIRO:
>
> \definelayer[mybg][width=\paperwidth,height=\paperheight,state=repeat]
>> \setlayer [mybg]
>> [hoffset=1cm, voffset=1cm]
>> {\framed[frame=on, width=3cm,
>> height=2cm]{\externalfigure[cow][width=1cm]
>> }}
>> \setupbackgrounds[page][background=mybg]
>>
>> \starttext
>> \dorecurse{6}{\input tufte\par}
>> \stoptext
>>
>> It still does not work(still layer only on first page in Mk IV). What am I
>> doing wrong?
>>
>
> A typo in pack-lyr.mkiv for the \dodoflushlayer macro.
>
> In MkII a line of the macro is
>
> \doifnotvalue{\??ll#2\c!position}\v!yes
> {\doifvalue{\??ll#2\c!repeat}\v!yes\!!donecfalse
> \doifvalue{\??ll#2\c!state}\v!repeat\!!donecfalse}%
>
> while in MkIV it's
>
> \ifx\@@currentlayerposition\v!yes
>
> \edef\@@currentlayerrepeat{\csname\??ll\currentlayer\c!repeat\endcsname}%
> % \edef\@@currentlayerstate
> {\csname\??ll\currentlayer\c!state\endcsname}% actually this is already set
> \ifx\@@currentlayerrepeat\v!yes
> \!!donecfalse
> \else\ifx\@@currentlayerstate\v!repeat
> \!!donecfalse
> \fi\fi
> \fi
>
> MkII expects position ≠ yes while MkIV continues only when position = yes
> what's wrong, you can add \unless before the \ifx and the layer mechanism
> works.
>
> \unless\ifx\@@currentlayerposition\v!yes
>
> \edef\@@currentlayerrepeat{\csname\??ll\currentlayer\c!repeat\endcsname}%
> % \edef\@@currentlayerstate
> {\csname\??ll\currentlayer\c!state\endcsname}% actually this is already set
> \ifx\@@currentlayerrepeat\v!yes
> \!!donecfalse
> \else\ifx\@@currentlayerstate\v!repeat
> \!!donecfalse
> \fi\fi
> \fi
> \fi
>
>
Thanks a lot, works great.
Regards,
Derek
[-- Attachment #1.2: Type: text/html, Size: 2618 bytes --]
[-- Attachment #2: Type: text/plain, Size: 487 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Layers don't repeat in Mk IV
2009-08-05 9:15 ` Wolfgang Schuster
2009-08-05 9:27 ` Derek CORDEIRO
@ 2009-08-06 19:48 ` Hans Hagen
1 sibling, 0 replies; 6+ messages in thread
From: Hans Hagen @ 2009-08-06 19:48 UTC (permalink / raw)
To: Wolfgang Schuster; +Cc: mailing list for ConTeXt users
Wolfgang Schuster wrote:
> A typo in pack-lyr.mkiv for the \dodoflushlayer macro.
ok, fixed in next release
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-08-06 19:48 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-04 16:52 Layers don't repeat in Mk IV Derek CORDEIRO
2009-08-04 21:13 ` Wolfgang Schuster
2009-08-05 8:47 ` Derek CORDEIRO
2009-08-05 9:15 ` Wolfgang Schuster
2009-08-05 9:27 ` Derek CORDEIRO
2009-08-06 19:48 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).